Rebuilding Standby - fails looking for current ORL

Environment:
Oracle 11.2.0.3 EE on Solaris
I am trying to rebuild a physical standby database on the standby server.
I have copied all RMAN files from the most recent Level 0 and Level 1 backups as well as all archived logs.
I have created and copied a new standby control file and located the copies in the documented places based on my pfile and spfile.
I have left the parameter 'standby_file_management' equal to 'auto'.
I have created an RMAN parameter file that looks like this:
startup nomount
sql 'alter database mount standby database';
run{
       allocate channel c1 type disk;
       allocate channel c2 type disk;
       allocate channel c3 type disk;
       allocate channel c4 type disk;
       allocate channel c5 type disk;
       restore database;
recover database;
When I run this it restores pretty much everything, but fails looking for what turns out to be the 'CURRENT' online redo log file from the Production database.
I verified this by running:
select * from v$log;
Why would the recovery process be looking for the currently active redo log file from the Production database?
What do I need to do to make it recover the data I've given it and then let me turn on MRP to pick up anything outstanding?
Any help is greatly appreciated!!
-gary

Thanks for the quick response!!
Since I have run the 'recover database' command and it has been successful up to the point where it's looking for the latest OLR, can I just start the MRP on the standby as it exists right now?
I'm not sure what the status of my standby is at this moment.
When I re-run the above script and look at the log file, I always see several lines of other data files it's recovering.
Have those been recovered successfully and it's just waiting on me to cancel the recovery?
Thanks again for your help!!!
-gary

Similar Messages

11g runinstaller fails looking for libjava.so

We are walking thru our first 11g upgrade and we are having a problem running ./runInstaller -executePrereqs. If fails looking for libjava.so. We are upgrading from 10.2.0.4 on an HP-UX Itanium server 64 bit with OS release at 11.31. Has anyone else run into this and what was their fix/workaround? Thanks.

Hello Michael,
Check note [1431797|http://service.sap.com/sap/support/notes/1431797|Oracle 11.2.0: Troubleshooting the Database Upgrade] for further information.
Regards,
Eduardo Rezende

Just put my i-tunes library on a 2nd hard drive, how do I easily change the location where the program looks for current songs from the C:/ drive to the new drive without going thru each song individually in the "get info" tab

I just installed a new hard drive and transfered my i-tunes library to the new drive. How can I make a bulk change of the location the program looks for the current songs. I know you can do it song by song from the "get info" tab but I need to do it for all 4500 songs. I have already changed the location that new files are stored to the new hard drive.

The pop-up lets you connect to the library file, iTunes Library.itl, on the external drive. This will, in turn, automatically update the preference for the iTunes Media folder to be the iTunes Media or iTunes Music folder inside the iTunes folder on the external drive and it will update the locations of all the content inside the media folder so that it uses the version on the external drive.
This works seamlessly if all iTunes content was inside the iTunes Media (or iTunes Music) folder (which was itself inside the iTunes library folder) before you moved/copied the iTunes folder. For content outside the iTunes Media folder iTunes should remain connected to the original location. These files should be consolidated (before or after the move/copy) and in addition, if available the library should be upgraded to the newer layout which places iPod Games and Mobile Applications inside the media folder instead of the library folder. (File > Library > Organize Library...)
For split libraries there are methods to rejoin them before moving (preferred) or repairing after the fact (e.g. my script) which I can go into if needed.
tt2

Installation fails looking for

I'm trying to install 10g. I keep getting an error part way through. The installation program seems to be looking for the file change_on_install.DMP, which is not where the log file says it ought to be. I've tried ignoring the error, but the installation seems to hang up with the message legend "Clone database creation in progress" at 46%. I've tried the enterprise and personal versions on the off chance that size matters. I've searched through the intallation files for "change_on_install.DMP." Nada. Here are what I think are the relevant log entries:
ERROR at line 1:
ORA-19624: operation failed, retry possible
ORA-19870: error reading backup piece C:\ORACLE\DATABASE\CHANGE_ON_INSTALL
ORA-19505: failed to identify file "C:\ORACLE\DATABASE\CHANGE_ON_INSTALL"
ORA-27041: unable to open file
OSD-04002: unable to open file
Connected to: Personal Oracle Database 10g Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
IMP-00002: failed to open change_on_install.DMP for read
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-06512: at "SYS.DBMS_BACKUP_RESTORE", line 5146
ORA-06512: at line 33
Any help is much appreciated.
Thanks,
Jim Carpenter

That file doesn't even exist. That seems to be the main problem.
Thanks,
Jim

Update failed looking for Status.msi

I recently downloaded and attempted to install an update to improve USB connectivity for my C6280 All-In-One printer. The update failed because something called Status.msi could not be located.
Now, everytime I start my computer an Windows installation box pops-up still looking for Status.msi. I have to cancel it 15-20 times before it fianally stops popping up.
I tried to get help fron the HP on-line chat techs but the one I got was absolutely worthless. It was obvious he never understood what the problem was.
I am not overly endowed with in-depth computer knowledge so any sugggestions need to be on as simple a level as possible.
I am using a Dell Dimension C521 with Vista Home Premium. My printer is a Photosmart C6280 All-in-one.
At this point I would be happy to just get the installation box to quit popping up.
Thanks in advance.

Insert the installation cd for your printer. Now in the CD contents, open the location setup\status, now right click on Status.msi and click on repair. It may ask you to restart the PC.
If this doesn't work, then when you get the "installation box", then click on the Browse button and locate the status.msi file on the CD in the same location, and the box shouldnt reappear.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Installation of Blackberry Desktop Software fails: looking for Blackberry 8310.msi file

I cannot successfully install and use any version of the Blackberry Desktop software. The problem started when I tried to install the desktop software on my new computer from a file I downloaded and stored on an external hard drive that had been attached to my old computer. The install/uninstall programs lists Blackberry desktop 4.2.2. It appeared to install correctly, but when I try to use it, I get a message saying the program is trying to use a network resource that is not available, and looks in a temp directory for this "Blackberry 8310.msi" file. There is also a program listed as "Blackberry v4.2.2 for the 8310 series wireless handheld" When I try to uninstall it, it looks for that same .msi file.
I'd like to be able to sync my calendar with my phone.
Does anyone know what I should do? I followed the clean uninstall directions, and that didn't make a difference.
Thanks.

SDR wrote:
Xandrex, I am having the same problem (along with a few others). I hate to sound like a novice, but how do I decompress into a folder other than temp? Whether installing from the website, or saving to my desktop and then installing, it unzips without giving me a choice of where to put the files.
Hello,
I don't have the install at home so my answer will be approximate. when you get the .exe file, it is in fact a zip file with a small launcher that knows it has to unzip the stuff in your temp file.
What you need is a decompression tool to decompress without that launcher. You can install 7Zip that is quite good for those things.
You can also try WinZIP or winRAR or winACE but those are not free-of-charge.
http://www.7-zip.org/
Once you have installed this tool, just open 7Zip and browse to the .exe file. click on it, there should be a button "Extract". Choose a folder (somewhere on your Desktop for example) and wait for the decompression to finish.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Oracle Ent Linux 5.3 ASM install Ok then Demon fails looking for odd lib

after installed correct libraries for 32 bit 5.e OELinux on a quad core core 2 duo I get the following error
when trying to manually load ocssd.bin deamon
this lib is not available on net and seems very rare.
root@localhost /# /app/oracle/product/11.1.0/db_1/bin/ocssd.bin
/app/oracle/product/11.1.0/db_1/bin/ocssd.bin: error while loading shared libraries: libhasgen11.so: cannot open shared object file: No such file or directory
I have already installed a 11g database on this machine then added asm packages.
oracleasm-2.6.18-128.1.1.el5-2.0.5-1.el5.i686
oracleasmlib-2.0.3-1.el5.i386
oracleasm-support-2.1.2-1.el5.i386

I haven't to install anything on my RHEL 5.3 to get ASM workng, oly on RHEL 4.x.
Just have to install package pre-reqs for Oracle RDBMS.
As RHEL is almost the same as OEL, you can trry to uninstall these manually added libraries.
These are the packages required:
binutils-2.17.50.0.6
compat-libstdc++-33-3.2.3
compat-libstdc++-33-3.2.3 (32 bit)
elfutils-libelf-0.125
elfutils-libelf-devel-0.125
gcc-4.1.1
gcc-c++-4.1.1
glibc-2.5-12
glibc-2.5-12 (32 bit)
glibc-common-2.5
glibc-devel-2.5
glibc-devel-2.5-12 (32 bit)
libaio-0.3.106
libaio-0.3.106 (32 bit)
libaio-devel-0.3.106
libgcc-4.1.1
libgcc-4.1.1 (32 bit)
libstdc++-4.1.1
libstdc++-4.1.1 (32 bit)
libstdc++-devel 4.1.1
make-3.81
sysstat-7.0.0

Installation of Blackberry desktop software fails - looking for F: drive

I do not have an F: drive on my laptop, just the C: drive and D: drive (dvd) How can I specify I want this software installed on my C: drive??

Are you installing from the CD?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Suggestions for current ANE development instructions

Any recommended links for instructions on building ANEs ( android in particular )?
I am looking for current tutorials if available.
I was last looking at this this one by Mark Hood: http://www.adobe.com/devnet/air/articles/ane-android-devices.html but the available download was missing the critical AS file.
I have looked at http://www.adobe.com/devnet/air/articles/building-ane-ios-android-pt1.html
but was hoping for something more current.
Thanks

Hi, I read a lot books, blogs, post at Adobe Dev website.
But I found one fun way to begin: Lynda.com http://tinyurl.com/3yl6xqt
Try it are some free videos.
Good luck

I have acquired windows office 2011 for my macbook but unable to open it. There are currently 3 files in the folder, 1 of which seems to be the actual program which is a hfs file. iv tried looking for programs to help me open it but failed

i have acquired windows office 2011 for my macbook but unable to open it. There are currently 3 files in the folder, 1 of which seems to be the actual program which is a hfs file. iv tried looking for programs to help me open it but failed.
when double clicking on the image it says unable to open and gives me the option to search the app store.
any help would be much appreciated
Adam

Well, first, just make sure it's the Mac version and not the Windows version (which indeed would not run on your Mac). You say "Windows Office" which is why I mention it. I think you probably just mean "Microsoft Office" though.
Next, is this on a disk (DVD), or did you purchase and download it from the Microsoft site?
Matt

I just bought iphone 5 and my itunes says I need itunes 10.7 But when I look for upgrades it says I have the current version of itunes. HELP!

I just bought iphone 5 and my itunes says I need itunes 10.7 But when I look for upgrades it says I have the current version of itunes. HELP!

I am so sorry I am frustrating you. This is the first time I have used this community and am leanring as I go. I am not able to see the entire post that you leave, unless I look at it on my phone (email)--I am so sorry. You have no idea how much i appreciate your help. Yes, I see that I can get the later version of OS software, but its not availabe for immediate download. My only options appear to be having it shipped, or going to the store to purchase. And if you know of another way that I can access all of my itunes library music on my new phone withouth using itunes, I would love to hear about it.--thanks and again i am so sorry for frustrating you.

Duplicate target database for standby failing with below error

Hello All, Need your assistance
We are creating a physical standby database (standalone) from 2 node RAC database, OS =RHEL5 and DB =11gR2
What we did: We took RMAN backup of primary DB along with archives and copied to standby server in same location. We have modified necessory prameters on primary as well as standby too.
The command we used :
RMAN>connect target sys/pwd@primary auxiliary sys/pwd@stdby
RMAN> run {
allocate auxiliary channel ch1 type disk;
duplicate target database for standby dorecover nofilenamecheck;
release channel ch1;
Note we tried : duplicate target database for standby as well as duplicate target database for standby nofilenamecheck methods too....But no luck..we are getting following error.
channel ch1: reading from backup piece /u01/BDB/BWFCCPRD_5fmpdvce_1_1
channel ch1: ORA-19870: error while restoring backup piece /u01/BDB/BWFCCPRD_5fmpdvce_1_1
ORA-19501: read error on file "/u01/BDB/BWFCCPRD_5fmpdvce_1_1", block number 121856 (block size=8192)
ORA-27072: File I/O error
Additional information: 4
Additional information: 121856
Additional information: 1036288
failover to previous backup
released channel: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/20/2011 09:16:11
RMAN-05501: aborting duplication of target database
RMAN-05556: not all datafiles have backups that can be recovered to SCN 41855007833
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
could you pease help to resolve this ....?
Note : Creating standby using RMAN 11g new feature : duplicate target database for standby from active database is not possible in our environment since the network bandwith is tooooo low, We have tried and not able to succeed because of n/w issue, So we are doing this alternate method...!!!
Looking for your valuable advises...
Thanks in Advance....

Take the fresh backup and also check the space crunch. The below clink may help you
ORA-27072: File I/O error Additional information: 2
--neeraj
Edited by: Vishen on Oct 20, 2011 2:14 PM

I'm looking for a voicemail app that will automatically switch over after normal business hours and play an alternate voice-mail message. Does this currently exist?

I’m looking for a voicemail app that will automatically switch over after normal business hours and play an alternate voice-mail message. Does this currently exist?

Voicemail is through your carrier and on their equipment.
It's function and features is set by them, not your phone.

Please help! Looking for script to insert current date on page.

I currently use a Dreamweaver Extension that lets you insert
current date and time on your web page.
The problem is, I don't know Javascript and cannot edit the
Javascript codes to "remove the time"
I only need the current date that will change every day.
Do you know where I can get this script, I goggled and got
several but I'm looking for something authentic.
Also is it possible to have your page validate when you use
Javascript embedded in your HTML?
Thanks everyone,
Patrick

quote:
Originally posted by:
Newsgroup User
Webethics wrote:
> The problem is, I don't know Javascript and cannot edit
the Javascript codes
> to "remove the time"
> I only need the current date that will change every day.
JavaScript generates the date by using the clock on the
computer of each
visitor to your site. If a visitor's clock has the wrong
date, your site
will also display the wrong date.
> Do you know where I can get this script, I goggled and
got several but I'm
> looking for something authentic.
I don't know what you mean by "authentic". Date generation in
JavaScript
is one of the most basic features of the language, so if it
works, it's
"authentic".
> Also is it possible to have your page validate when you
use Javascript
> embedded in your HTML?
Yes, but you shouldn't embed JavaScript in XHTML.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/
So mr. Powers are there people that use Javascript Date in
their page?
Would you recommend it?
I could use PHP but I don't know PHP,
How do I come up with the string in this format, say,
Wednesday, October 29th, 2008 that will change to a new day
according to the server time and date.
Thanks so much for your help and I have two of your books! I
will be taking PHP classes in December.
Patrick

Hi, I'm currently browsing the web looking for a case that is compatible with the smart cover for the iPad 2. If anyone has any suggestions I would be glad to read all opinions! Thanks!

Hi, I'm currently browsing the web looking for a case that is compatible with the smart cover for the iPad 2. If anyone has any suggestions I would be glad to read all opinions! Thanks!

I love the Smart Cover. It fits the way I work and I love the instant on/off and the always available screen protection. I wouldn't use my iPad without it.
I got a Cover Buddy for the back, because I wanted the back to be less slippery when I'm using the iPad in the classroom, teaching. I picked this back cover because it's VERY lightweight, easy to get on or off and, protects the corners, has accurate cutouts for the ports, and (in the colors) has a rubberized surface:
http://www.switcheasy.com/products/CoverBuddy/
I have a Built NY "hoody" slip on case with a hard internal shell that I use when I'm in the field and I can put the iPad with the Smart Cover and the Cover Buddy inside this . But for everyday use, the Smart Cover with the Cover Buddy is a terrific combination.

Rebuilding Standby - fails looking for current ORL

Similar Messages

Maybe you are looking for