Receive faxes automatically using the set up wizard
I can receive a fax manually but wish to receive automatically
Sounds like you're out of luck! If the other computer doesn't have the correct JRE or the Oracle client, then your software won't run at all.
You'll have to install JRE 1.3 and the proper Oracle client software before you can really do much else.
Similar Messages
-
I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?
You are most welcome
-
Hi
On my macbook pro
I'm try to set up a new Epson printer SX 445 to my router/network but each time I run the set up wizard it fails to complete saying Security Key/Password Check fail.
*entered security key/password does not match the one set for for router.
I know that the password is correct and have rechecked this by changing it a few times
and I still get the same result.
My network internet service provider is not interested and says to call Epson.
Anybody have any clues how I can resolve this?
RegardsI personally suggest the new Drobo FS. Since it has an iTunes server built in and you can use any size sata hard drive in it it is better and a NAS that has to use the same size drives.
-
My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay for repairs in store because I didnt get the Apple care plan when I purchased it. Sprint said it may be a phone problem not sure if I should take it to Sprint or Apple...I just need my phone
I'm sorry to learn that you are not able to make/receive calls chelseabee! (ticket number removed) results indicate that there is no issues with the network or account provisioning. Since you have already done a hard reset http://vz.to/1gBkSJc (as per your post), I recommend exploring replacement options. If your phone is within the one year manufacturers' warranty we can provide a Certified Like New replacement http://vz.to/uyYF0o as long as no physical/liquid damage exist. If your phone has sustained physical/water damage and you have insurance, you can submit a claim to the insurance company online at this link http://bit.ly/07CrqPK
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport
>> Edited to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator -
How to use the set functions effectively in webi ,please let me know with detail
how to use the set functions effectively in webi ,please let me know with detail
Hi,
we use use set functions on heirarchies with aggregate functions mostly .
If you include member_set, Min returns the minimum value of the aggregated data for all members in the member set.
Member_set can include multiple sets separated by semicolons (;).
The list of member sets must be enclosed in {}.
If the member set expression does not specify a precise member or node, the hierarchy referenced must be present in the table, then the member set expression references the current member in the hierarchy in the table. If the hierarchy is not in the table, the function returns the message #MULTIVALUE.
Eg .
1) Ancestor
=Sum([YTD] ; {Ancestor([Test Hierarchy];2)})
2) IsLeaf
=[Test Hierarchy].IsLeaf
You can use this function when you want to show your Measure only at lower level .
3) .Depth
=[Test Hierarchy].Depth
This is also function used with hierarchy to find Level of Members .
Follow this link for PDF reference .
Page 147
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CDIQFjAB&url=https%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2Fboexir4%2Fen%2Fxi4sp5_ffc_en.pdf&ei=nBAUU-iUM4WWrAeMuoCoDg&usg=AFQjCNHakXsEjd_yUk2y3lVdibf3PXpEOA&bvm=bv.61965928,d.bmk
search on SCN this question was discussed before also one those links .
http://scn.sap.com/thread/3183380
Hope this will help you . -
Cannot connect from dreamweaver cs5.5 to mysql using the mysql connection wizard
Cannot connect from dreamweaver cs5.5 to mysql using the mysql connection wizard error Http error 403 or 500 internal server error. I am using ubuntu mysql.
a manual php script work fine
<?php
// open connection to mysql server
$dbc = mysql_connect('localhost','root','password');
if (!$dbc) {
die('Not Connected' . mysql_error ());
//select database
$db_selected = mysql_select_db ("msinventory",$dbc);
if (!$db_selected)
die('Cannot Connect' . mysql_error());
echo "TEST DONE1";
?>
but the database connection wizard fails with http error 403 or 500
i also use the HeidiSQL client and it works, the only problem is in dreamweaver.OK. Did you really mean to ask this question on a ColdFusion forum, if it's DreamWeaver you're having problems with? You're probably better off raising this on a DreamWeaver forum. "Using the correct tool for the job" 'n'all.
Adam -
I'm currently trying to deploy the struts-example webapp from Struts 1.1 RC1 into
Weblogic Portal 8.1 using the Struts Portlet wizard made available by the "JSR
168 and Struts Support" patch.
I select the struts module successfully "struts-example" and am prompted for the
location of name mangled configuration file (i.e "struts-config.xml" for struts-example
becomes "jpf-struts-config-struts-example.xml").
As soon as I hit next, I am prompted with a dialog informing that me that [Workbench]
"Cannot parse the struts configuration file."
Given that this is a file supplied with the struts distro and that I can deploy
the struts-example to Vanilla WLS 8.1 without problems I suspect this is a problem
with my attempt to use the Struts Portlet.
Can anyone please help?
Thanks,
--Andy HullI'm currently trying to deploy the struts-example webapp from Struts 1.1 RC1 into
Weblogic Portal 8.1 using the Struts Portlet wizard made available by the "JSR
168 and Struts Support" patch.
I select the struts module successfully "struts-example" and am prompted for the
location of name mangled configuration file (i.e "struts-config.xml" for struts-example
becomes "jpf-struts-config-struts-example.xml").
As soon as I hit next, I am prompted with a dialog informing that me that [Workbench]
"Cannot parse the struts configuration file."
Given that this is a file supplied with the struts distro and that I can deploy
the struts-example to Vanilla WLS 8.1 without problems I suspect this is a problem
with my attempt to use the Struts Portlet.
Can anyone please help?
Thanks,
--Andy Hull -
"Cannot parse the struts configuration file" when using the Struts Portlet Wizard
I'm currently trying to deploy the struts webapp from Struts 1.1 into
Weblogic Portal 8.1 using the Struts Portlet wizard.
I select the struts module successfully and am prompted for the
location of configuration file.
As soon as I hit next, I am prompted with a dialog informing "Cannot parse the
struts configuration file."
I have 't started my server.
Thanks
KichaI'm currently trying to deploy the struts webapp from Struts 1.1 into
Weblogic Portal 8.1 using the Struts Portlet wizard.
I select the struts module successfully and am prompted for the
location of configuration file.
As soon as I hit next, I am prompted with a dialog informing "Cannot parse the
struts configuration file."
I have 't started my server.
Thanks
Kicha -
Will a Pixma automatically use the alternate black cartridge?
When the 220 black cartridge in my Pixma goes empty will the printer automatically use the 221 black instead? I now have three 221 blacks on the shelf and would just as soon use them up instead of buying a 220.
Hi PRambler,
The reason for the two different black ink tanks is for the different types of printing your unit is able to perform. They are not intended as backups to each other.
The larger black tank is pigment based, and is primarily used for standard black text printing or output. The smaller black ink tank is dye based like the color inks, and is used for photo and graphics output.
They are designed to complement each other, allowing the printer to produce the best possible black text output or photo quality as appropriate.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Can I use the Tax Payment Wizard to pay the Withholding taxes...?
For SAP B1 2007 B PL 7---
Can I use the Tax Payment Wizard to pay the Withholding taxes...?You must use a credit card registered with your name and address.
There is no other option. -
How can I stop receiving email automatically from the community when they have issues with there problems regarding the apple products.
Click here for the instructions on stopping the emails.
(85713) -
i tried using the setting icon to reset the prints and icon to a bigger size, thereafter the setting icon lost color to gray and stopped responding.? most of the pop up boxes will also not respond why?
Thanks Winston, restarting my router worked for me too. Seems that somehow the DCHP (maybe due to the Mountain Lion upgrade?) had assigned the same IP address to both the AppleTV and my iMac. The AppleTV stopped appearing as an AirPlay device for my iPhone and Mac, but still the AppleTV had Internet access.
Restarting the router reassigned IPs and without fanfare, the AppleTV is now available to AirPlay. -
How to use the set full screen mode ?
hai...i' a newbie ..i hav one question ...how to use the set full screen mode for my application..
i found.
public void setfullscreenmode (boolean mode)
but when try in my application it error and other
canvas.setfullscreenmode(true);
actually i don't know where i should put this codei also found the coding it use like
setFullScreenMode (true);
but when i apply it ..it error because cannot resolve the symbol.
my question is which one i should use; declare the
public void setFullScreenMode (boolean mode);
first or use
setFullScreenMode (true) ;
or other way ..what i need to do to use setFullScreenMode -
Where is the set up wizard?
I uninstalled firefox in order to download a clean version but don't get to the set up wizard. I recently encountered a trojan horse that caused me to quarantine certain archive functions. What do I look for and how do I fix this?
== Firefox was "not responding" so I rebooted in safe mode to scan for viruses. I found that I couldn't install. I downloaded a service pack from MS for an installer and now I can download firefox (apparently) but can't see it on the control panel or in icon form, and can't access the set up wizard. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)My problem was that the set up wizard never showed up, though I downloaded several times to replicate the problem. Though downloaded, firefox never showed up as a download or as an icon, and neither did the wizard.
-
i forgot how to use the setting, move the mouse to the upper left corner and the windows become smaller for an overview?
I'm not quite sure what you want - if you want an overview of all open windows, use the F key.. Otherwise please post back and be more specific.
Maybe you are looking for
-
Macbook Pro (mid 2009) display glitch?
Hello there, I own a 15" Unibody Macbook pro from mid 2009. I haven't had many issues with it until recently. I've had occasional overheating, and sleep problems within the last 6 months but I never got it checked. Yesterday, I opened my Mac from sle
-
I forgot the answers to my security questions and my iPod won't let me buy anything unless I put them in. What do I do?
-
First page appears blank when viewing a Crystal Report in the web viewer
I have seen threads and KB articles regarding this issue but the suggested solutions do not correct the issue. (KB articles [1423482 and 1439109) The issue only started after upgrading from CR 2008 runtime to CR 2008 SP4 runtime. When the page contai
-
When I use the application CD, that was given inside the box. It fails to install the programs? Any help on this, or do I have to contact apple.
-
Hai, my requirement is to develope RFC which takes vendor as i/p and gives the successful bids list for that vendor. Can anybody suggest in which tables this information gets stored and whether both quotation and bid r same .