Receiver ABAPProxy-Addressing Type parameter

Hi,
In receiver ABAPProxy, we have Addressing Type parameter, which has two options 1. URL Address and 2. HTTP destination.
What is difference between two and when to choose?
Thanks,
Pragathi.

we have 1. SDN and 2. help.sap.com
What is difference between two and when to choose?
http://help.sap.com/saphelp_nwpi71/helpdata/EN/85/78af1bf407434796aaf8dbd6d4e7b7/frameset.htm

Similar Messages

  • HTTPS communication using HTTP receiver adapter URL address as Address Type

    Hi All,
    If some one who has tried HTTPS communication using HTTP receiver adapter using URL address as Address type can you please guide me what are the steps need to be done.
    Note : Address type is a parameter in HTTP adapter setup .
    Regards,
    Reddy

    Hi,
    Check this,
    Configurations in Integration Directory
    The plain HTTP adapter gives the receiver system the following specifications:
    — Specifications for addressing using a URL address:
    Target host, service number, and path prefix including query string:
    http://<hostname:port>/<path>?<query-string>
    You can identify the target host (HTTP port) of a SAP Web Application Server using
    the
    ICM monitor
    Host and port of the HTTP proxy (optional if there is a firewall between the plain
    HTTP adapter and the receiver system)
    Authentication data for the receiver system.
    See also: transaction Display and Maintain RFC Destinations (SM59).
    &#151; Specifications for addressing using an HTTP destination:
    HTTP destination
    &#151; Parameters from the communication channel for technical routing
    Content type (the entry text/XML is expected as default)
    Specifies the format that the message contents (the payload) should have.
    Optional header fields for the receiver-specific protocol
    Attributes for the query string
    1. Sender party
    2. Sender service
    3. Receiver Interface
    4. Message ID
    5. Quality of service
    6. Queue ID
    All attributes are selected except for the queue ID. If you do not want a value to be
    transferred to the receiver, deselect it. The queue ID is only required if the quality of
    service is EOIO.
    Specifications for payload manipulation
    XML code (default UFT-8)
    Specifies the character set.
    URL escaping
    Presents the XML in a URL-enabled format. Special characters that could be
    interpreted as control characters are replaced with escape characters (masked).
    Prolog
    Enhances the payload for particular servers (optional, see below).
    Epilog
    Enhances the payload for particular servers (optional, see below).
    Enhancing the Payload
    Regards
    Seshagiri

  • HTTPS Receiver Adapter POST with FILE TYPE parameter

    Hello,
    I need to do a POST to a URL service that validates content of a file. It receives user and password as string parameters and a FILE as a mime type parameter.
    I'll appreciate any help.
    Regards,
    Diego.

    Hi.
    Using Http Receiver Adapter , you can try out this.
    This blog may give some idea-
    /people/amol.joshi2/blog/2006/06/28/must-fire-a-http-get-from-xi---try-this
    Otherwise, try out with callinng this service via SOAP Adapter i.e webservice.
    Rgds,
    moorthy

  • Is it possible to use HTTPS in HTTP recv adapter using Address type as URL

    Hi All,
    If some one who has tried HTTPS communication using HTTP receiver adapter using URL address as Address type can you please guide me what are the steps need to be done.
    Address type is a parameter in HTTP adapter setup .
    Regards,
    Reddy

    Use the below code to get the reference of EntityManagerImpl and get the reference of Session from EntityManagerImpl and then you can call the Stored Procedure.
    private EntityManagerImpl emImpl;
    emImpl = (EntityManagerImpl)Persistence. createEntityManagerFactory("TFDModel").createEntityManager();
    Session session= emImpl.getActiveSession();
    StoredProcedureCall call = new StoredProcedureCall();
    call.setProcedureName("CONVERT_FEET_TO_METERs");
    call.addNamedInOutputArgumentValue(
    "LENGTH", // procedure parameter name
    new Integer(100), // in argument value
    "LENGTH", // out argument field name
    Integer.class // Java type corresponding to type returned by procedure
    ValueReadQuery query = new ValueReadQuery();
    query.setCall(call);
    Integer metricLength = (Integer) session.executeQuery(query);
    Regards,
    Vinay

  • Client not receive ip address - dhcp_reqd

    Hi,
    In my environment there's a  5508 (firmware 7.4.110.0) and ap 1600 with a ias radius server. All wlan are in flex-connect local switching, one client try to connect on a wlan but not receive ip address. After enabled debug aaa all i took the log corresponding :
    Cisco Controller) >*emWeb: Feb 11 16:52:36.047: Created WARP Capabilities IE (length 12) for WLAN LAB
    *apfMsConnTask_2: Feb 11 16:54:22.495: 18:3d:a2:25:01:a4 Adding mobile on LWAPP AP 00:3a:9a:77:55:a0(0)
    *apfMsConnTask_2: Feb 11 16:54:22.495: 18:3d:a2:25:01:a4 Association received from mobile on BSSID 00:3a:9a:77:55:06
    *apfMsConnTask_2: Feb 11 16:54:22.495: 18:3d:a2:25:01:a4 Rf profile 200 Clients are allowed to AP radio
    *apfMsConnTask_2: Feb 11 16:54:22.495: 18:3d:a2:25:01:a4 Max Client Trap Threshold: 50  cur: 3
    *apfMsConnTask_2: Feb 11 16:54:22.495: 18:3d:a2:25:01:a4 Rf profile 200 Clients are allowed to AP wlan
    *apfMsConnTask_2: Feb 11 16:54:22.495: 18:3d:a2:25:01:a4 Applying Interface policy on Mobile, role Unassociated. Ms NAC State 0 Quarantine Vlan 0 Access Vlan 0
    *apfMsConnTask_2: Feb 11 16:54:22.495: 18:3d:a2:25:01:a4 Re-applying interface policy for client
    *apfMsConnTask_2: Feb 11 16:54:22.495: 18:3d:a2:25:01:a4 0.0.0.0 START (0) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2018)
    *apfMsConnTask_2: Feb 11 16:54:22.495: 18:3d:a2:25:01:a4 0.0.0.0 START (0) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2246)
    *apfMsConnTask_2: Feb 11 16:54:22.495: 18:3d:a2:25:01:a4 In processSsidIE:4264 setting Central switched to FALSE
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 Applying site-specific Local Bridging override for station 18:3d:a2:25:01:a4 - vapId 103, site 'Test', interface 'management'
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 Applying Local Bridging Interface Policy for station 18:3d:a2:25:01:a4 - vlan 0, interface id 0, interface 'management'
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 Applying site-specific override for station 18:3d:a2:25:01:a4 - vapId 103, site 'Test', interface 'management'
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 Applying Interface policy on Mobile, role Unassociated. Ms NAC State 2 Quarantine Vlan 0 Access Vlan 0
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 Re-applying interface policy for client
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 0.0.0.0 START (0) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2018)
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 0.0.0.0 START (0) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2246)
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 processSsidIE  statusCode is 0 and status is 0
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 processSsidIE  ssid_done_flag is 0 finish_flag is 0
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 STA - rates (8): 130 132 139 150 12 18 24 36 0 0 0 0 0 0 0 0
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 suppRates  statusCode is 0 and gotSuppRatesElement is 1
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 STA - rates (12): 130 132 139 150 12 18 24 36 48 72 96 108 0 0 0 0
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 extSuppRates  statusCode is 0 and gotExtSuppRatesElement is 1
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 Processing WPA IE type 221, length 24 for mobile 18:3d:a2:25:01:a4
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 Setting active key cache index 8 ---> 8
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 unsetting PmkIdValidatedByAp
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 0.0.0.0 START (0) Initializing policy
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state START (0)
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state AUTHCHECK (2)
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 0.0.0.0 8021X_REQD (3) DHCP required on AP 00:3a:9a:77:55:a0 vapId 103 apVapId 1for this client
    *apfMsConnTask_2: Feb 11 16:54:22.497: 18:3d:a2:25:01:a4 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:3a:9a:77:55:a0 vapId 103 apVapId 1 flex-acl-name:
    *apfMsConnTask_2: Feb 11 16:54:22.497: 18:3d:a2:25:01:a4 apfMsAssoStateInc
    *apfMsConnTask_2: Feb 11 16:54:22.497: 18:3d:a2:25:01:a4 apfPemAddUser2 (apf_policy.c:276) Changing state for mobile 18:3d:a2:25:01:a4 on AP 00:3a:9a:77:55:a0 from Idle to Associated
    *apfMsConnTask_2: Feb 11 16:54:22.497: 18:3d:a2:25:01:a4 apfPemAddUser2:session timeout forstation 18:3d:a2:25:01:a4 - Session Tout 0, apfMsTimeOut '0' and sessionTimerRunning flag is  0
    *apfMsConnTask_2: Feb 11 16:54:22.497: 18:3d:a2:25:01:a4 Stopping deletion of Mobile Station: (callerId: 48)
    *apfMsConnTask_2: Feb 11 16:54:22.497: 18:3d:a2:25:01:a4 Func: apfPemAddUser2, Ms Timeout = 0, Session Timeout = 0
    *apfMsConnTask_2: Feb 11 16:54:22.497: 18:3d:a2:25:01:a4 Sending Assoc Response to station on BSSID 00:3a:9a:77:55:a0 (status 0) ApVapId 1 Slot 0
    *apfMsConnTask_2: Feb 11 16:54:22.497: 18:3d:a2:25:01:a4 apfProcessAssocReq (apf_80211.c:7399) Changing state for mobile 18:3d:a2:25:01:a4 on AP 00:3a:9a:77:55:a0 from Associated to Associated
    *apfMsConnTask_2: Feb 11 16:54:22.506: 18:3d:a2:25:01:a4 Updating AID for REAP AP Client 00:3a:9a:77:55:a0 - AID ===> 4
    *dot1xMsgTask: Feb 11 16:54:22.512: 18:3d:a2:25:01:a4 Station 18:3d:a2:25:01:a4 setting dot1x reauth timeout = 1800
    *dot1xMsgTask: Feb 11 16:54:22.512: 18:3d:a2:25:01:a4 dot1x - moving mobile 18:3d:a2:25:01:a4 into Connecting state
    *dot1xMsgTask: Feb 11 16:54:22.512: 18:3d:a2:25:01:a4 Sending EAP-Request/Identity to mobile 18:3d:a2:25:01:a4 (EAP Id 1)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.513: 18:3d:a2:25:01:a4 Received EAPOL START from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.513: 18:3d:a2:25:01:a4 dot1x - moving mobile 18:3d:a2:25:01:a4 into Connecting state
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.513: 18:3d:a2:25:01:a4 Sending EAP-Request/Identity to mobile 18:3d:a2:25:01:a4 (EAP Id 2)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.541: 18:3d:a2:25:01:a4 Received EAPOL EAPPKT from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.541: 18:3d:a2:25:01:a4 Received EAP Response packet with mismatching id (currentid=2, eapid=1) from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.554: 18:3d:a2:25:01:a4 Received EAPOL EAPPKT from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.554: 18:3d:a2:25:01:a4 Received Identity Response (count=2) from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.554: 18:3d:a2:25:01:a4 EAP State update from Connecting to Authenticating for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.554: 18:3d:a2:25:01:a4 dot1x - moving mobile 18:3d:a2:25:01:a4 into Authenticating state
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.554: 18:3d:a2:25:01:a4 Entering Backend Auth Response state for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.572: 18:3d:a2:25:01:a4 Processing Access-Challenge for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.572: 18:3d:a2:25:01:a4 Entering Backend Auth Req state (id=3) for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.572: 18:3d:a2:25:01:a4 Sending EAP Request from AAA to mobile 18:3d:a2:25:01:a4 (EAP Id 3)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.585: 18:3d:a2:25:01:a4 Received EAPOL EAPPKT from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.585: 18:3d:a2:25:01:a4 Received EAP Response from mobile 18:3d:a2:25:01:a4 (EAP Id 3, EAP Type 25)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.585: 18:3d:a2:25:01:a4 Entering Backend Auth Response state for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.598: 18:3d:a2:25:01:a4 Processing Access-Challenge for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.598: 18:3d:a2:25:01:a4 Entering Backend Auth Req state (id=4) for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.598: 18:3d:a2:25:01:a4 Sending EAP Request from AAA to mobile 18:3d:a2:25:01:a4 (EAP Id 4)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.613: 18:3d:a2:25:01:a4 Received EAPOL EAPPKT from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.613: 18:3d:a2:25:01:a4 Received EAP Response from mobile 18:3d:a2:25:01:a4 (EAP Id 4, EAP Type 25)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.613: 18:3d:a2:25:01:a4 Entering Backend Auth Response state for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.627: 18:3d:a2:25:01:a4 Processing Access-Challenge for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.627: 18:3d:a2:25:01:a4 Entering Backend Auth Req state (id=7) for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.627: 18:3d:a2:25:01:a4 WARNING: updated EAP-Identifier 4 ===> 7 for STA 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.627: 18:3d:a2:25:01:a4 Sending EAP Request from AAA to mobile 18:3d:a2:25:01:a4 (EAP Id 7)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.643: 18:3d:a2:25:01:a4 Received EAPOL EAPPKT from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.643: 18:3d:a2:25:01:a4 Received EAP Response from mobile 18:3d:a2:25:01:a4 (EAP Id 7, EAP Type 25)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.643: 18:3d:a2:25:01:a4 Entering Backend Auth Response state for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Processing Access-Accept for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Resetting web IPv4 acl from 255 to 255
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Resetting web IPv4 Flex acl from 65535 to 65535
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Setting re-auth timeout to 1800 seconds, got from WLAN config.
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Station 18:3d:a2:25:01:a4 setting dot1x reauth timeout = 1800
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Username entry (pippo) created for mobile, length = 253
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Username entry (pippo) created in mscb for mobile, length = 253
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Creating a PKC PMKID Cache entry for station 18:3d:a2:25:01:a4 (RSN 0)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Setting active key cache index 8 ---> 8
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Setting active key cache index 8 ---> 0
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Sending EAP-Success to mobile 18:3d:a2:25:01:a4 (EAP Id 7)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.657: 18:3d:a2:25:01:a4 Freeing AAACB from Dot1xCB as AAA auth is done for  mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.657: 18:3d:a2:25:01:a4 Starting key exchange to mobile 18:3d:a2:25:01:a4, data packets will be dropped
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.657: 18:3d:a2:25:01:a4 Sending EAPOL-Key Message to mobile 18:3d:a2:25:01:a4
                                                                                                                        state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.657: 18:3d:a2:25:01:a4 Entering Backend Auth Success state (id=7) for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.657: 18:3d:a2:25:01:a4 Received Auth Success while in Authenticating state for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.657: 18:3d:a2:25:01:a4 dot1x - moving mobile 18:3d:a2:25:01:a4 into Authenticated state
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.671: 18:3d:a2:25:01:a4 Received EAPOL-Key from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.671: 18:3d:a2:25:01:a4 Received EAPOL-key in PTK_START state (message 2) from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.671: 18:3d:a2:25:01:a4 Stopping retransmission timer for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.671: 18:3d:a2:25:01:a4 Sending EAPOL-Key Message to mobile 18:3d:a2:25:01:a4
                                                                                                                        state PTKINITNEGOTIATING (message 3), replay counter 00.00.00.00.00.00.00.01
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.689: 18:3d:a2:25:01:a4 Received EAPOL-Key from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.689: 18:3d:a2:25:01:a4 Received EAPOL-key in PTKINITNEGOTIATING state (message 4) from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.689: 18:3d:a2:25:01:a4 Stopping retransmission timer for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.689: 18:3d:a2:25:01:a4 apfMs1xStateInc
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.689: 18:3d:a2:25:01:a4 0.0.0.0 8021X_REQD (3) Change state to L2AUTHCOMPLETE (4) last state 8021X_REQD (3)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.689: 18:3d:a2:25:01:a4 0.0.0.0 L2AUTHCOMPLETE (4) DHCP required on AP 00:3a:9a:77:55:a0 vapId 103 apVapId 1for this client
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.689: 18:3d:a2:25:01:a4 0.0.0.0 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP 00:3a:9a:77:55:a0 vapId 103 apVapId 1 flex-acl-name:
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.690: 18:3d:a2:25:01:a4 0.0.0.0 L2AUTHCOMPLETE (4) Change state to DHCP_REQD (7) last state L2AUTHCOMPLETE (4)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.690: 18:3d:a2:25:01:a4 0.0.0.0 DHCP_REQD (7) pemAdvanceState2 5952, Adding TMP rule
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.690: 18:3d:a2:25:01:a4 0.0.0.0 DHCP_REQD (7) Adding Fast Path rule
      type = Airespace AP - Learn IP address
      on AP 00:3a:9a:77:55:a0, slot 0, interface = 13, QOS = 0
      IPv4 ACL ID = 255, IP
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.690: 18:3d:a2:25:01:a4 0.0.0.0 DHCP_REQD (7) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 15206  Local Bridging Vlan = 0, Local Bridging intf id = 0
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.690: 18:3d:a2:25:01:a4 0.0.0.0 DHCP_REQD (7) Successfully plumbed mobile rule (IPv4 ACL ID 255, IPv6 ACL ID 255)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.690: 18:3d:a2:25:01:a4 Key exchange done, data packets from mobile 18:3d:a2:25:01:a4 should be forwarded shortly
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.690: 18:3d:a2:25:01:a4 Sending EAPOL-Key Message to mobile 18:3d:a2:25:01:a4
                                                                                                                        state PTKINITDONE (message 5 - group), replay counter 00.00.00.00.00.00.00.02
    *pemReceiveTask: Feb 11 16:54:22.690: 18:3d:a2:25:01:a4 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
    *spamApTask3: Feb 11 16:54:22.707: 18:3d:a2:25:01:a4 Sent EAPOL-Key M5 for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.768: 18:3d:a2:25:01:a4 Received EAPOL-Key from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.768: 18:3d:a2:25:01:a4 Received EAPOL-key in REKEYNEGOTIATING state (message 6) from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.769: 18:3d:a2:25:01:a4 Stopping retransmission timer for mobile 18:3d:a2:25:01:a4
    *apfReceiveTask: Feb 11 16:54:25.619: 18:3d:a2:25:01:a4 0.0.0.0 DHCP_REQD (7) State Update from Mobility-Incomplete to Mobility-Complete, mobility role=Local, client state=APF_MS_STATE_ASSOCIATED
    *apfReceiveTask: Feb 11 16:54:25.619: 18:3d:a2:25:01:a4 0.0.0.0 DHCP_REQD (7) pemAdvanceState2 5576, Adding TMP rule
    *apfReceiveTask: Feb 11 16:54:25.619: 18:3d:a2:25:01:a4 0.0.0.0 DHCP_REQD (7) Replacing Fast Path rule
      type = Airespace AP - Learn IP address
      on AP 00:3a:9a:77:55:a0, slot 0, interface = 13, QOS = 0
      IPv4 ACL ID = 255,
    *apfReceiveTask: Feb 11 16:54:25.619: 18:3d:a2:25:01:a4 0.0.0.0 DHCP_REQD (7) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 15206  Local Bridging Vlan = 0, Local Bridging intf id = 0
    *apfReceiveTask: Feb 11 16:54:25.619: 18:3d:a2:25:01:a4 0.0.0.0 DHCP_REQD (7) Successfully plumbed mobile rule (IPv4 ACL ID 255, IPv6 ACL ID 255)
    *pemReceiveTask: Feb 11 16:54:25.619: 18:3d:a2:25:01:a4 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
    (Cisco Controller) >*emWeb: Feb 11 16:54:46.127: 18:3d:a2:25:01:a4 Central Switch = FALSE
    *emWeb: Feb 11 16:54:46.128: 18:3d:a2:25:01:a4 Central Switch = FALSE
    (Cisco Controller) >
    (Cisco Controller) >
    (Cisco Controller) >
    (Cisco Controller) >*emWeb: Feb 11 16:55:36.461: 18:3d:a2:25:01:a4 Central Switch = FALSE
    *emWeb: Feb 11 16:55:36.463: 18:3d:a2:25:01:a4 Central Switch = FALSE
    From log i know that 802.1x passed, while dhcp don't send ip address. It seems that the local vlan id is 0 while in reality is 3... WHY ? i don't understand.
    Someone can help me to find the problem? i think the problem is on the network, the dhcp ( the corporate router) is directly connected to the ap.

    Are you setting your FlexConnect native vlan and the wlan to vlan mapping?  You also need to make sure you have the ip helpers setup and that dhcp is working.  I would configure a switch port to a vlan that the wireless users is suppose to be on locally at that site and connect a laptop to that port and make sure that the laptop gets an address.
    Thanks,
    Scott
    *****Help out other by using the rating system and marking answered questions as "Answered"*****

  • Switch datetime type parameter to date type

    Hello expert,
            I created crystal report by oracle procedure directly ,   but a date parameter for this procedure is mapped to datatime type parameter in crystal report, its format is dd/mm/yyyy hh:mm:ss.  instead of this datatime format, I need date format as "dd/mm/yyyy", but I found I can't change data type for this procedure parameter in crystal report.  I know I can't choose data type for procedure parameter if I use procedure in  command.  but over here, I have to use this procedure directly instead of using command as data connection for this report.  Can I change this procedure parameter for datetime type to date type in the crystal report. Apprecaite very much.

    You can get crystal to treat the datetime field as a date field by addressing it as 
    date({datetime})
    when ever you refer to it. You may even be able to address your parameter as
    date({?datetimeparameter})
    Debi

  • Maintaining Service Arrangement for Employees: Address type-ID not availabl

    Hello,
    I´m facing the following problem while implementing CRM Service via Best Practices for CRM V1.70:
    Building Block Configuration Guide C26 CRM SERVICE:
    Section 3.3.3 WFM Core Settings:
    3.3.3.1     Maintaining Service Arrangements for Employee
    Assignment Block u2018Service Arrangementsu2019:
    In Assignment block Location there is no address type-ID u2018XXDEFAULTu2019 for adress source u2018Organizationu2019. Thus I receive the following error message: u2018Enter a valid address usage typeu2019. Address type-ID u2018XXDEFAULTu2019 is only available for adress source u2018Individualu2019.
    What exactly do I have to do in order to make address type-ID u2018XXDEFAULTu2019 also available for adress source u2018Organizationu2019.
    Thanks in advance.
    Best regards,
    AEV

    Hi,
    I am facing similar problem what did you do to resolve it.
    Thanks in advance.
    Rahul

  • Help - Business Partner "Error in conversion Customizing for address types"

    Hi Experts,
    I am encountering an error with maintaining the Payer/ee in the Payment Details (SI) tab under Counterparty company code.
    The error message I get is below --
    *Error in conversion Customizing for address types (-> note 594871, III)
         Message no. FTBU800*
    I need your kind help please to troubleshoot this issue.. I receive the same error when i book deals and try to view the "Payment Details" tab during TX01 or TM01. I am not sure anymore what could be causing this problem.
    Thanks,
    David

    Hello Raj,
    Impliment the correction as specified in the sap Note 594873.. sect III.
    You can take the help of your basis team for downloading it Using Tcode "SNOTE" and if you have sufficient authorizations you can do it your self..
    another option is to down load the Note from the service market place and get the correction implimented manually by a technical consultant.
    Wish you success.
    M. Naveen Kumar

  • Flexconnect Local Switching Hosts Do Not Receive IP Addresses

    Hello,
    My WLC software version is 7.4.110.0. I have a branch office in my lab. The AP in my branch is configured as flexconnect with native VLAN of 700. The SSID that I have in the branch office is configured to do local switching. The show wlan is added below.
    My tunneled SSID still working and I can still receive IP addresses from it. My issue is last week I have the Flexconnect working with no problem, then this morning I can connect to the SSID, but I'm not receiving IP addresses for my test wireless clients.
    Thanks
    [code]
    WLAN Identifier.................................. 2
    Profile Name..................................... ACS Guest
    Network Name (SSID).............................. RMTGuest
    Status........................................... Enabled
    MAC Filtering.................................... Disabled
    Broadcast SSID................................... Enabled
    AAA Policy Override.............................. Disabled
    Network Admission Control
      Client Profiling Status ....................... Disabled
       DHCP ......................................... Disabled
       HTTP ......................................... Disabled
      Radius-NAC State............................... Disabled
      SNMP-NAC State................................. Disabled
      Quarantine VLAN................................ 0
    Maximum number of Associated Clients............. 0
    Maximum number of Clients per AP Radio........... 200
    Number of Active Clients......................... 0
    Exclusionlist Timeout............................ 60 seconds
    Session Timeout.................................. 1800 seconds
    User Idle Timeout................................ 300 seconds
    --More-- or (q)uit
    User Idle Threshold.............................. 0 Bytes
    NAS-identifier................................... RK2WLC5508-01
    CHD per WLAN..................................... Enabled
    Webauth DHCP exclusion........................... Disabled
    Interface........................................ management
    Multicast Interface.............................. Not Configured
    WLAN IPv4 ACL.................................... unconfigured
    WLAN IPv6 ACL.................................... unconfigured
    mDNS Status...................................... Disabled
    mDNS Profile Name................................ unconfigured
    DHCP Server...................................... 172.28.27.130
    DHCP Address Assignment Required................. Disabled
    Static IP client tunneling....................... Disabled
    PMIPv6 Mobility Type............................. none
    Quality of Service............................... Silver
    Per-SSID Rate Limits............................. Upstream          Downstream
    Average Data Rate................................   0                      0
    Average Realtime Data Rate.......................   0                      0
    Burst Data Rate..................................   0                      0
    Burst Realtime Data Rate.........................   0                      0
    Per-Client Rate Limits........................... Upstream          Downstream
    Average Data Rate................................   0                      0
    Average Realtime Data Rate.......................   0                      0
    --More-- or (q)uit
    Burst Data Rate..................................   0                      0
    Burst Realtime Data Rate.........................   0                      0
    Scan Defer Priority.............................. 4,5,6
    Scan Defer Time.................................. 100 milliseconds
    WMM.............................................. Allowed
    WMM UAPSD Compliant Client Support............... Disabled
    Media Stream Multicast-direct.................... Disabled
    CCX - AironetIe Support.......................... Enabled
    CCX - Gratuitous ProbeResponse (GPR)............. Disabled
    CCX - Diagnostics Channel Capability............. Disabled
    Dot11-Phone Mode (7920).......................... Disabled
    Wired Protocol................................... None
    Passive Client Feature........................... Disabled
    Peer-to-Peer Blocking Action..................... Disabled
    Radio Policy..................................... All
    DTIM period for 802.11a radio.................... 1
    DTIM period for 802.11b radio.................... 1
    Radius Servers
       Authentication................................ Disabled
       Accounting.................................... Disabled
       Dynamic Interface............................. Disabled
       Dynamic Interface Priority.................... wlan
    Local EAP Authentication......................... Disabled
    --More-- or (q)uit
    Security
       802.11 Authentication:........................ Open System
       FT Support.................................... Disabled
       Static WEP Keys............................... Disabled
       802.1X........................................ Disabled
       Wi-Fi Protected Access (WPA/WPA2)............. Enabled
          WPA (SSN IE)............................... Disabled
          WPA2 (RSN IE).............................. Enabled
             TKIP Cipher............................. Disabled
             AES Cipher.............................. Enabled
                                                                   Auth Key Management
             802.1x.................................. Disabled
             PSK..................................... Enabled
             CCKM.................................... Disabled
             FT-1X(802.11r).......................... Disabled
             FT-PSK(802.11r)......................... Disabled
             PMF-1X(802.11w)......................... Disabled
             PMF-PSK(802.11w)........................ Disabled
          FT Reassociation Timeout................... 20
          FT Over-The-DS mode........................ Enabled
          GTK Randomization.......................... Disabled
          SKC Cache Support.......................... Disabled
    --More-- or (q)uit
          CCKM TSF Tolerance......................... 1000
       WAPI.......................................... Disabled
       Wi-Fi Direct policy configured................ Disabled
       EAP-Passthrough............................... Disabled
       CKIP ......................................... Disabled
       Web Based Authentication...................... Disabled
       Web-Passthrough............................... Disabled
       Conditional Web Redirect...................... Disabled
       Splash-Page Web Redirect...................... Disabled
       Auto Anchor................................... Disabled
       FlexConnect Local Switching................... Enabled
       flexconnect Central Dhcp Flag................. Disabled
       flexconnect nat-pat Flag...................... Disabled
       flexconnect Dns Override Flag................. Disabled
       FlexConnect Vlan based Central Switching ..... Disabled
       FlexConnect Local Authentication.............. Disabled
       FlexConnect Learn IP Address.................. Enabled
       Client MFP.................................... Optional
       PMF........................................... Disabled
       PMF Association Comeback Time................. 1
       PMF SA Query RetryTimeout..................... 200
       Tkip MIC Countermeasure Hold-down Timer....... 60
    AVC Visibilty.................................... Disabled
    --More-- or (q)uit
    AVC Profile Name................................. None
    Flow Monitor Name................................ None
    Call Snooping.................................... Disabled
    Roamed Call Re-Anchor Policy..................... Disabled
    SIP CAC Fail Send-486-Busy Policy................ Enabled
    SIP CAC Fail Send Dis-Association Policy......... Disabled
    KTS based CAC Policy............................. Disabled
    Assisted Roaming Prediction Optimization......... Disabled
    802.11k Neighbor List............................ Disabled
    802.11k Neighbor List Dual Band.................. Disabled
    Band Select...................................... Disabled
    Load Balancing................................... Disabled
    Multicast Buffer................................. Disabled
    Mobility Anchor List
    WLAN ID     IP Address            Status
    802.11u........................................ Disabled
    MSAP Services.................................. Disabled
    [/code]

    is the VLAN still mapped on the AP, and allowed across the trunk?
    HTH,
    Steve
    Please remember to rate useful posts, and mark questions as answered

  • A question about a method with generic bounded type parameter

    Hello everybody,
    Sorry, if I ask a question which seems basic, but
    I'm new to generic types. My problem is about a method
    with a bounded type parameter. Consider the following
    situation:
    abstract class A{     }
    class B extends A{     }
    abstract class C
         public abstract <T extends A>  T  someMethod();
    public class Test extends C
         public <T extends A>  T  someMethod()
              return new B();
    }What I want to do inside the method someMethod in the class Test, is to
    return an instance of the class B.
    Normally, I'm supposed to be able to do that, because an instance of
    B is also an instance of A (because B extends A).
    However I cannot compile this program, and here is the error message:
    Test.java:16: incompatible types
    found   : B
    required: T
                    return new B();
                           ^
    1 errorany idea?
    many thanks,

    Hello again,
    First of all, thank you very much for all the answers. After I posted the comment, I worked on the program
    and I understood that in fact, as spoon_ says the only returned value can be null.
    I'm agree that I asked you a very strange (and a bit stupid) question. Actually, during recent months,
    I have been working with cryptography API Core in Java. I understood that there are classes and
    interfaces for defining keys and key factories specification, such as KeySpec (interface) and
    KeyFactorySpi (abstract class). I wanted to have some experience with these classes in order to
    understand them better. So I created a class implementing the interface KeySpec, following by a
    corresponding Key subclass (with some XOR algorithm that I defined myself) and everything was
    compiled (JDK 1.6) and worked perfectly. Except that, when I wanted to implement a factory spi
    for my classes, I saw for the first time this strange method header:
    protected abstract <T extends KeySpec> T engineGetKeySpec
    (Key key, Class<T> keySpec) throws InvalidKeySpecExceptionThat's why yesterday, I gave you a similar example with the classes A, B, ...
    in order to not to open a complicated security discussion but just to explain the ambiguous
    part for me, that is, the use of T generic parameter.
    The abstract class KeyFactorySpi was defined by Sun Microsystem, in order to give to security
    providers, the possibility to implement cryptography services and algorithms according to a given
    RFC (or whatever technical document). The methods in this class are invoked inside the
    KeyFactory class (If you have installed the JDK sources provided by Sun, You can
    verify this, by looking the source code of the KeyFactory class.) So here the T parameter is a
    key specification, that is, a class that implements the interface KeySpec and this class is often
    defined by the provider and not Sun.
    stefan.schulz wrote:
    >
    If you define the method to return some bound T that extends A, you cannot
    return a B, because T would be declared externally at invocation time.
    The definition of T as is does not make sense at all.>
    He is absolutely right about that, but the problem is, as I said, here we are
    talking about the implementation and not the invocation. The implementation is done
    by the provider whereas the invocation is done by Sun in the class KeyFactory.
    So there are completely separated.
    Therefore I wonder, how a provider can finally impelment this method??
    Besides, dannyyates wrote
    >
    Find whoever wrote the signature and shoot them. Then rewrite their code.
    Actually, before you shoot them, ask them what they were trying to achieve that
    is different from my first suggestion!
    >
    As I said, I didn't choose this method header and I'm completely agree
    with your suggestion, the following method header will do the job very well
    protected abstract KeySpec engineGetKeySpec (Key key, KeySpec key_spec)
    throws InvalidKeySpecException and personally I don't see any interest in using a generic bounded parameter T
    in this method header definition.
    Once agin, thanks a lot for the answers.

  • I am trying to read my iMessages from my iPhone 4S on my iPad 2, but the messages do not show up on my iPad 2. I made sure that the receiving email address is the same on both devices and both are signed into my single Apple account.

    I am trying to read my iMessages from my iPhone 4S on my iPad 2, but the messages do not show up on my iPad 2. I made sure that the receiving email address is the same on both devices and both are signed into my single Apple account.

    Is it possible that the person who sent the message to your phone sent it to your phone # instead?  Try sending a message to your phone via the email address and see if it shows up on the iPad.

  • PL/SQL Network Address Type Functions

    Hi,
    I'm wondering if anyone knows of a PL/SQL package(s) that provides similar capabilities as the following postgreSQL network address type functions:
    http://www.sql.org/sql-database/postgresql/manual/functions-net.html
    I don't see anything in the standard Oracle 10g packages, so I'm wondering if anyone else has dealt with this problem and posted the package.
    Thanks,
    - Greg.

    I think the easiest way of getting some of this functionality would be to write a PL/SQL wrapper to a Java Stored Procedure that implements calls to the Java InetAddress class. It doesn't haven't the full set of operators but I'm not sure what 'less than' actually means in the context of an IP address . If you really need them you could always extend the InetAddress class to implement such tests.
    Cheers, APC

  • HT204053 The one alias I've had for over 5 years has not fully migrated over to iCloud. My account now shows 3of3 aliases available but I'm still able to receive messages addressed to my old alias. I can no longer send emails using this alias. Help!

    For years I have been using [email protected] for business.
    It is on my business cards, stationary and most of my closest correspondences are maintained off of that email.
    The documentation I've read indicates aliases should be transferred over as part of this iCloud migration but this does not seem to be the case. My account now shows 3of3 aliases available but I'm still able to receive messages addressed to the alias. I can no longer send emails from this alias.
    How do I get this corrected?
    Ali,
    [email protected]
    A.K.A
    [email protected] 

    Workable solution found here:
    https://discussions.apple.com/thread/1589996?start=15&tstart=0

  • JLS3: Scope of type parameter and inner class declaration

    The following code:
    class Foo<E>
      class E
        E foo()
          return this;
    }produces this error message:
    $ javac Foo.java
    Foo.java:7: incompatible types
    found   : Foo<E>.E
    required: E
          return this;
                 ^
    1 errorApparently, the type parameter E of the outer class Foo shadows the inner class declaration E. An alternative way to check is to create a new E() in this method, which results in an error message about using a type parameter where a type is expected.
    Of course this code is sick, but I would like to know where this is defined in the JLS3, since I cannot find out in which way this shadowing works. What I've found until now:
    Page 179:
    "The scope of a class' type parameter is the entire declaration of the class."
    Page 190:
    "The scope of a declaration of a member m declared in or inherited by a class type C is the entire body of C, ... "
    Page 132:
    "If a type name consists of a single Identifier, then the identifier must occur in the scope of exactly one visible declaration of type with this name, or a compile time error occurs."
    Section 6.3.1 (Shadowing declarations) specifies the shadowing rules, but does not mention type parameters.
    Any help is appreciated.

    The current behaviour in eclilpse seems to be the one we get if the bug in javac is fixed as described.
    This code compiles
    public class Shadow1 {
         class Foo<E>
           class E
              E foo()
               return this;
    }but this code
            Foo<E>.E foo()
               return this;
             }shows
    Type mismatch: cannot convert from Shadow1.Foo<E>.E to Shadow1.Foo<Shadow1.Foo<E>.E>. E
    Not sure if this error message is correct.

  • Javax.mail.NoSuchProviderException: No provider for Address type: rfc822

    Use JavaMail 1.2 send Mail Errors:
    "javax.mail.NoSuchProviderException: No provider for Address type: rfc822"
    Why?
    Can you supply a stmp server name?
    Thanks.

    [skyask],
    Honestly, I am not very sure where the JVM is located for the WebLogic 5.1 application server. You probably need to contact your local BEA rep office for support.
    The jar file for the JavaMail API is either mail.jar (contains the API libraries) or mailapi.jar (contains the API libraries and all the providers), so I guess if you search the WebLogic directories, you might be able to locate it.
    It also depends on the OS platform that you are working on and the WebLogic installation documentation may give a clue or two where the .jar files for optional Java packages are found.
    HTH.
    Allen Lai
    Developer Technical Support
    SUN Microsystems
    http://www.sun.com/developers/support/

Maybe you are looking for

  • Best approach to work with drag & drop functionality

    I m new to java technology & want to implement drag & drop functionality with java web application.so, Please suggest me the best way or best framework or any api to implement drag & drop functionality with java web application.

  • Horizontal mapping & mapping tool

    Hi, Can MappingTool populate mapping data, given only jdo metadata? Example follows: <jdo> <package name="com.bear.fi.tradehub.domain.test"> <class name="BaseJDO" identity-type="datastore"> <extension vendor-name="kodo" key="jdbc-class-map" value="ho

  • Ipod's playlist order does not stay the same after undocking from itunes

    Hi, I have built several playlists on my new 6G ipod nano.  I arranged about 50 songs that I want to play at the start of the play list. They are arranged correctly while docked to itunes.  When I undock and hit <playlist> and select the playlist to

  • Lookout server process control through modem from remote site

    Hi! I want to control the lookout version 5.0 server process from my office by using the simple 56k internal modem and telephone line. I know the congiguration for sever /Client for  Local Area Network (LAN). 1. I have server process. 2. I have clien

  • Edu Version does not appear in order history

    Hello, I'm Stephanie and I ordered the educational version of the creative cloud for students, but it does not appear in my order history or somewhere else. I don't have uploaded any proof of my educational status as a student, could this be the prob