Receiver channel cannot access folder

Hi all,
my issue is about my ftp receiver channel. the channel cannot access a directory found in a server.
i am able to access the directory from an ftp cleint but the channel always get a time out due to an invalid address.
what is weird is that the channel is able to access the server but not the directory in the server.
i checked other issues in the forum but most wer due to wrong directory names and slashes...
can anyone please guide me?
thanks.

my issue is about my ftp receiver channel. the channel cannot access a directory found in a server.
i am able to access the directory from an ftp cleint but the channel always get a time out due to an invalid address.
what is weird is that the channel is able to access the server but not the directory in the server.
Try the below:
1. Goto Start ---> run --> drivers --> etc --> hosts --> ADD YOUR HOST NAME AND IP OF THE SERVER HERE
2.Check the root for the folder to which the ftp has been given For eg: if the ftp is activated on the path C: driver\Inbox then in the communication channel just give the value \ and nothing else as it is directly accessing the folder and the path need not be given.
This should help.
Cheers
Dhwani

Similar Messages

  • Adobe Reader Version X (10.1.4) fails install says it cannot access folder 'F:/EVFCF/Pictures'   ERROR 1606 done three times same result.

    Why is the installer interested in a empty folder on a different drive than where I saved the installed which vanishes during installation then waits a few minutes and then popsup the error 1606?

    I got some screenshots.
    Here is the by-line
    Another popup
    My seeking for a new reader started when I noticed the Firefox warning in plug-in add-ons
    So I selected Never activate it, then it became uninstalled.
    Adobe Reader has vanished off my Windows Vista system, no files either.
    I have Adobe reader v8.1.0 installed and Beyond Adobe reader cannot find the Internet connection so I have disabled it from starting when I start v8.

  • TS2621 Cannot access my yahoo mail in iPad. Receive it on my iPhone. Have stopped & started both. Put the fetch to "off" & manually. Not sure what else to do.

    Cannot access my yahoo mail in iPad. Receive it on my iPhone. Have stopped & started both. Put the fetch to "off" & manually. Not sure what else to do.comes up with message "connection to server failed". This started when I transferred my service to a iPhone 4 to a 4s.

    Reinstalling would be about the most useless thing you could do, given that the test with the other User account works -- that means the application is OK.
    The next step that would be indicated would to remove the com.apple.mail.plist file from Home/Library/Preferences, after having Quit Mail. Subsequently when you relaunch Mail it will open as though New, but if you only enter the setup information for each account, and DECLINE when prompt to ask if you want to Import anything. Mail should rediscover the existing account folders, and all should be well.
    As a precaution, open Home/Library and locate the Mail folder -- Duplicate the Mail folder, and drag the resulting copy to the Desktop for temporary backup.
    Ernie

  • Cannot access library folder

    I saved a file accidently in my outlook temporary file.  I cannot access my library file, get:
    The folder “Library” can’t be opened because you don’t have permission to see its contents.

    I didn't know that iTunes had a 64bit download. I have Windows 7 Home Premium with 64bit operation system. I downloaded the iTunes for 64bit and it seems to have corrected the problem. I haven't received the message yet since I did this.

  • Cannot display the folder. Microsoft Outlook cannot access the specified folder location.

    Hi, guys
    I cannot view delegate mailbox in Outlook. Following is my configure.
    I have two mailbox A-User and B-User
    Login Outlook as A-User, click File -> Account Settings -> Delegate Access, add B-User and give Editor permission of Inbox.
    Right click A-User's root inbox and select Properties -> Permission, select B-User and check "Folder visible".
    Login Outlook as B-User on other computer, click File -> Account Settings -> Account Settings, select B-User and click Change -> More Settings -> Advanced, add A-User.
    Now I can see a root A-User in Navigation Pane. But when I click it, it shows
    "Cannot display the folder. Microsoft Outlook cannot access the specified folder location."
    or
    "Cannot display the folder. Microsoft Outlook cannot access the specified folder location. The operation failed. An object cannot be found".
    I searched some solutions from internet, but all of them don't work. Could you give some suggestions? 
    Thanks.

    Hi,
    First, please double check if you have given the right permission to B-User on your step 2.
    In addition, we can try to give a higher permission to the B-user to check the result.
    Please feel free to post back and let me know the result.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • Is there any way to recover files when the back up catalog has been deleted accidently.  I can see a preview of the photos, but I cannot access or edit them.  They say "the folder cannot be located" and "the photo is missing".  I have gone through multipl

    I can see a preview of the photos, but I cannot access or edit them.  They say "the folder cannot be located" and "the photo is missing".  I have gone through multiple Adobe tutorials to try and recover them to no avail.  Any tips?

    Backup catalogs wouldn't have helped with this problem anyway, but naturally, you shouldn't delete backup catalogs for a while.
    The solution to reconnecting the folders is given here: Adobe Lightroom - Find moved or missing files and folders

  • User cannot access redirected Documents folder, but can connect to share in Windows Explorer and access folder on server

    I am in the final stages of a cross-forest migration.  Users have Windows 7 workstations with redirected folders on a Windows Server 2012 box running in the old forest.  User accounts were not migrated.  The accounts in use have always
    been in the "new" forest.  One of our challenges was the large volume of data in redirected folders.  I made sure users in the target forest had continued to have access to their redirected folders in the old forest and robocopied
    the entire users share, copying the permissions with the files.  By doing incremental robocopies, we can get a final copy done now in about six hours.  The plan was simple: copy the files, do an incremental copy every night, on the night of the cutover
    change the folder redirection policy Documents path from
    \\oldserver\users\%USERNAME% to
    \\newserver\users\%USERNAME%. The policy is configured to NOT copy user files from the existing folder to the new redirected folder.  Everything was going well until I tested the policy change.  After the folder redirection policy is updated
    and applied, the user cannot access the private Documents folder.  For example, user Chester Tester logs on as ctester.  I open Windows Explorer and click the Documents shortcut.  I see one subfolder, which is subfolder of Public Documents. 
    So I can look at Public Documents but when I click on the Documents folder (Under the Documents library link) I get an access denied error.  Now for the kicker, if I open another Windows Explorer window and edit the address bar to
    \\newserver\users\ctester, I can navigate the Documents folder tree and see my thousands of documents. What the ....?
    I'm hoping this is something really simple to fix!
    TIA

    HI Vivian,
    Thank you for your reply.  Yes, the path in Group Policy Folder Redirection Root Path was updated to
    \\NEWSERVER\users.  I had planned to point this to the distributed file system, so the first used was actually
    \\domain\dfs\users.  To simplify things I have backed off to copying to just a normal share
    \\newserver\users. 
    We are using BASIC folder redirection and we create a folder for each user under the root path. 
    We did not want the policy to move content, as we were seeing users requiring 15-20 minute logon times  (or higher) after the policy is changed.
    Grant the User exclusive right to Documents - Disabled
    Move the contents of Documents to the new location - Disabled
    Related folder settings
    Video - Follow Documents
    Music - Follow Documents
    Pictures - Follow Documents
    Now when I change the folder redirection from old server to new server I now have TWO My Documents folders in the user's redirection folder on the server.  The redirected Documents points to an empty folder set.  The copied folders with all user
    data are there, but folder redirection refuses to recognize the original folder.
    I am looking at the full view of the folder, nothing hidden, so I'm wondering how a folder can have two subfolders with the exact same name.  For now, I just want the redirection to move from the old server to the new server properly.  I deleted
    the new My Documents folder, rebooted the user's workstation and tried again.  The behavior repeats itself, i.e., a new My Documents folder is always created when the redirection policy is changed from the old server to the new server.  The environment
    has about 1500 users with approximately 1.3TB of data in the redirected Documents folders.  OUCH!

  • I am receiving a message that my ID has been disabled, and I followed the steps to change the password, but still receive the same message.  Cannot access app store or do updates.

    I am receiving a message that my ID has been disabled, and I followed the steps to change the password, but still receive the same message.  Cannot access app store or do updates.

    In what way are you receiving this message? It is very common to get an email telling you that your ID has been disabled, and asking you to confirm all your details so the sender can steal your identity online.....

  • While deleting the virtual machine .vhd folder -- error msg : the process cannot access the file beacuse it is being used by another process

    When i am trying to delete the Virtual Machine folder/directory i get the below error. Virtual machine is turned off
    V:\>rmdir ME-EXCAS01 /s
    ME-EXCAS01, Are you sure (Y/N)? y
    ME-EXCAS01\ME-EXCAS01\Virtual Machines\1B1FD14E-B3F0-4232-9F96-2A871E879CD6.xml
    - The process cannot access the file because it is being used by another process
    How to delete the whole folder ?
    Thanks

    Also, if your VM has snapshots and you delete it, you must wait for the snapshots to finish merging - the VHD files will be locked until then.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.

  • Now Mavericks is installed, I cannot access my downloads folder.

    Now Mavericks is installed, I cannot access my downloads folder. How do I click on items in the folder and get them to open? When I attempt to click on the items, nothing happens. Before Mavericks, I could click and get the folders to open.  Yes, I have used three different devices to try to click on them, so it is not my mouse/treackpad/Wacom pen. I am getting very frustrated with this new OS - this is not the only thing bothering me.

    Now Mavericks is installed, I cannot access my downloads folder. How do I click on items in the folder and get them to open? When I attempt to click on the items, nothing happens. Before Mavericks, I could click and get the folders to open.  Yes, I have used three different devices to try to click on them, so it is not my mouse/treackpad/Wacom pen. I am getting very frustrated with this new OS - this is not the only thing bothering me.

  • Cannot access a shared folder Error code: 0x80070035

    Hello Experts,
    I have been working on this issue for like three days without a solution. I am truly desperate.
    My company just purchased a new Cloud Server that we will use as our development environment for a software project. In order for all the developers (which are all over the US) to access the development environment, we need to have a few shared folders on
    that new server.
    As soon as we got the server I did the following:
    1) Installed Active Directory
    2) Created a directory and made it shared - yes IT IS shared.
    3) I created a few new users on the new active directory domain
    THE PROBLEM:
    I can't access the shared directory.
    Other developers have been successful in connecting to the shared folder (so the share is working) - all except me.
    when I open explorer and type \\IPADDRESS\SHAREDFOLDER instead I get this error (I am not even asked for credentials)
    Network Error
    Windows cannot access \\IPADDRESS\SHAREDFOLDER
    Error code: 0x80070035
    The network path was not found.
    Things I have already tried:
    a) Enable NetBIOS over TCP/IP - on all adapters - still did not help
    b) Disable IPv6 - I am not sure how to check if it truly disabled
    c) Turned off all firewalls - did not help
    d) Mapping a Drive using different credentials - I just get asked for credentials over and over
    e) Ping - yes I can see the server
    f) My credentials are correct because I can Remote Desktop with the credentials with no problem ( I am administrator)
    My Machine:
    Brand New Asus G Series
    Windows 7 Home Edition
    Any ideas?
    Sorcerdon

    In my case it was that the OU that my system was in did not have firewall rules for network file and printer sharing enabled. I enabled all of the rules for Domain policy and that fixed it.
    I noticed a lot of comments about turning off the firewall not working. I can't be 100% sure, but in my experience with Server 2008 and Windows 7, if you want to configure a service that uses the network the base filter engine and the firewall HAVE to be
    turned on while you configure. You can turn the firewall off after configuration, but they have to be active during configuration.
    Good luck!

  • Cannot access photos in photo stream folder

    PS Touch on my iPad iOS 8.2 cannot access photos in the photo stream folder.  They appear as blank boxes.  Why?  The photo stream folder contains photos that are shared across devices.  The photo stream folder appears in the app but when opened blank boxes appear where the photos should be.  After doing a search, I see this has been an ongoing problem for other users & uninstalling/reinstalling does not fix the issue.  The workaround is to copy the photos into Camera Roll then import them from there.  Does Adobe plan to address this issue in a future update?

    Hey there earnest007!
    I have an article here for you that can help you troubleshoot this issue with your iCloud shared photo streams:
    iCloud: Troubleshooting iCloud Photo Sharing and Shared Photo Streams
    http://support.apple.com/kb/ts4379
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • Since installing upgraded version I cannot access on line bill pay sites. Message received is unrestricted connection.

    I cannot access my bill paying sites. ie, discover.com. Message I receive is this connection is untrusted connection. The problem occurs with all such sites.

    I have talked to Apple Support Norway and solved the problem.
    Try changing your password. That should sent an update to your account through the system and fix the problem immediately.
    Hope this helps you as well.
    -C

  • Cannot access Filters when they are saved to a folder in the shared area

    hello
    I have created a series of filters in oracle BI 11g and have saved these filters in the shared area under folders eg :
    Folder : Purchasing Report Filters
    Content : (The filter)
    However I cannot access the filter when applying it to a purchasing related report
    can anyone suggest why?
    Thanks for any replies
    Hiten

    In the Catalog, select the folder for the report(s) you want to update in the Folders pane. It should then appear in the Tasks pane (bottom left) with some options.
    Select 'Permissions' and make sure that 'Hidden' attribute is unchecked. That worked for me.
    There's also a 'Show Hidden Items' check box at the top right of the Catalog area that should be checked to view the filters in the Catalog area (rather than when ediiting a report).
    Edited by: Raj on Apr 11, 2013 2:44 PM

  • I have 4 emails in junk folder, but I cannot access them, all i get is a "no message " sign

    I have four messages in my junk folder but I cannot access them, when i click
    on the folder I get "No message selected"
    Help

    You will need to erase the HDD and start over by reinstalling the OS and setting the Mac up as a new one with your own Apple ID.
    Linc gives you a few options how;
    https://discussions.apple.com/message/25672158

Maybe you are looking for