Receiver JDBC Channel Error : Incorrect syntax near 'OR'

hi,
we are facing the below error at the receiver communication channel:
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'table' (structure 'statement'): com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near 'OR'.
When we again reprocess the message,it shows the exact error at the channel.
Any ideas why the first error shows up?

Hi, Anu
The most probable it's that your target XML it's not correct because it haven't a correct format.
Please, check your target XML and see
http://help.sap.com/saphelp_nwpi711/helpdata/en/48/465581929734d9e10000000a42189d/frameset.htm
Regards,
Carme

Similar Messages

Multi-value parameter report - error : Incorrect syntax near ',' with multi-valued parameter in SSRS

Hey,
I created a report in Reporting Services where I added multi-value parameter
( Filter). When I run my report, and try to select more than one parameter, I get an error: Incorrect syntax near ','
then i put in parameter expression : join(Parameters!Filter.Value,",")
and add : dbo.ufnSplit before calling parameter in query :
>>> set @valwhere = 'table.field IN (select * from dbo.ufnSplit(' + @Filter + ' , '',''))'
but i still have errors : incorrect syntax near 'text' which is the second value of the picklist of the parameter,
Please Any idea ?
Thanks !!

I have sometimes had to collate as default with the SQL query
currently I've just using
CompanyName in
(selectitemfromdbo.fnSplit(@function,','))
In the SSRS report text box I have Join(Parameters!Company.Value,",")

[Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help me

What are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected]

JDBC Receiver Adapter:Incorrect syntax near the keyword 'FROM'

Hi All,
I'm trying to get data from an SQL 2005 server using synchronous JDBC receiver adapter. I'm using PI 7.0. My outgoing message is as follows:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_IZIN_YUKU_REQ xmlns:ns0="http://holding.com/brd/">
- <STATEMENT>
- <ECZ_IZIN_YUKU action="SELECT">
<table>ECZ_IZIN_YUKU</table>
<access />
- <key>
<iy_yil compareOperation="GT">1900</iy_yil>
</key>
</ECZ_IZIN_YUKU>
</STATEMENT>
</ns0:MT_IZIN_YUKU_REQ>
I've found the following log in the trace file:
#1.5#0014C23BCFC900630000003D000013B000042740B0A858B1#1169058702046#/Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/JDBC#sap.com/com.sap.aii.af.app#com.sap.aii.adapter.jdbc.XI2JDBC.onInternalMessageBinary(Message)#J2EE_GUEST#0####fa10f5f0a65811db84410014c23bcfc9#XI XI2JDBC[CC_JDBC_RECI_BRD_TO_BHT/HUMANIST/]_2574##0#0#Error#1#com.sap.aii.adapter.jdbc.XI2JDBC#Plain###Error processing request, rollback: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ECZ_IZIN_YUKU' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near the keyword 'FROM'.#
Thanks a lot..

Hi,
Make sure the XML structure for your SQL statement is correct. Include the all the fields in the structure of XML.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_IZIN_YUKU_REQ xmlns:ns0="http://holding.com/brd/">
<STATEMENT>
 <TECZ_IZIN_YUKU ACTION="SELECT">
 <TABLE>ECZ_IZIN_YUKU</TABLE>
 <ACCESS>
 <EMPNO></EMPNO>
 <NAME></NAME>
 </ACCESS>
 <KEY>
 <iy_yil compareOperation="GT">1900</iy_yil>
 </KEY>
</TABLENAME>
</STATEMENT>
</ns0:MT_IZIN_YUKU_REQ>
Best Regards

Strange error while executing a stored procedure: Incorrect syntax near '@p0'

All, I am getting a strange error while executing a stored procedure: Incorrect syntax near '@p0' using JDBC CallableStatment.
Here is my code...
CallableStatement cStmt = con.prepareCall("{call SET CHAINED ON EXEC <dbName>.<schemaName>.<SPName> (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}");
cStmt.setString(1, "2012005881");
cStmt.setString(2, "07");
cStmt.setString(3, "10");
cStmt.setString(4, "Case title");
cStmt.setString(5, "Open");
java.sql.Date dt1 = new java.sql.Date(2014,10,20);
cStmt.setDate(6, dt1);
cStmt.setString(7, "01");
cStmt.setString(8, "N");
cStmt.setString(9, "ADA Test");
cStmt.setString(10, "N");
cStmt.setString(11, "English");
cStmt.setString(12, "N");
cStmt.setString(13, "N");
cStmt.setString(14, "N");
cStmt.setString(15, "N");
cStmt.setString(16, "N");
cStmt.setString(17, "N");
cStmt.setString(18, "07");
cStmt.setString(19, "10");
cStmt.setString(20, "juache0");
java.sql.Date dt2 = new java.sql.Date(2014,10,20);
java.sql.Date dt3 = new java.sql.Date(2014,10,20);
cStmt.setDate(21, dt2);
cStmt.setDate(22, dt3);
cStmt.setString(23, "userid0");
cStmt.setString(24, "");
cStmt.setString(25, "");
cStmt.setString(26, "");
java.math.BigDecimal bg1 = new java.math.BigDecimal(10);
cStmt.setBigDecimal(27, bg1);
cStmt.setString(28, "userid");
cStmt.setString(29, "userid");
int hadResults = cStmt.executeUpdate();
Your help is greatly appreciated.
I am executing the above using Jconnect3.0 driver, inside WebSphere Application Server V8.0
Thanks
Nags

NOTE: I don't work with JDBC/jConnect so (at this point) just some questions ...
1 - are you sending this to ASE, ASA, IQ, or some other RDBMS?
2 - what is the value of <schemaname>?
3 - do you have other prepareCall() instances that successfully call a stored proc? [would be interesting to see if there's a difference in the format of the calls]
A quick google search shows a couple ways to submit a stored proc execution to the RDBMS, with the format depending on the format expected by the target RDBMS.
I'm wondering if you really need/want the parentheses around the argument list, ie, what happens if you change
from
-- parentheses around args
EXEC <dbName>.<schemaName>.<SPName> ( ?,?,?,?,?,...,? )
to
-- no parentheses around args
EXEC <dbName>.<schemaName>.<SPName> ?,?,?,?,?,...,?
In ASE if I wrap the parameters in parentheses I get the same error you're getting:
================== w/ parentheses => error
1> sp_who (sa)
2> go
Msg 102, Level 15, State 1:
Server 'CC1_V1', Line 1:
Incorrect syntax near 'sa'. <<=== sa == @p0 ??
================== w/out parentheses => works
1> sp_who sa
2> go
fid spid status loginame origname ...
 0 17 running sa sa ...
==================

ODBC error state: 60 code: 102 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Incorrect syntax near

Hi,
I am currently receiving the following error in BI Answers when I run a query against a Microsoft SQL 2005 Server.
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 16001] ODBC error state: 60 code: 8180 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Statement(s) could not be prepared.. [nQSError: 16001] ODBC error state: 60 code: 102 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Incorrect syntax near 'UserName'.. [nQSError: 16002] Cannot obtain number of columns for the query result. (HY000)
SQL Issued: SELECT 0 s_0, "SD&A_Dashboard_Test"."BORIS_ALIAS_ETMS_Users"."Id" s_1, "SD&A_Dashboard_Test"."BORIS_ALIAS_ETMS_Users"."UserName" s_2 FROM "SD&A_Dashboard_Test" WHERE ("BORIS_ALIAS_ETMS_Users"."UserName" = 'trowe') FETCH FIRST 65001 ROWS ONLY
I am able to connect successfully to the Data Source and run a query against the database using the NQCMD command line tool so believe I have configured the DataDirect 7.0.1 drivers correctly, also I am able to view the Table Data in the RPD Physical Layer in the BI Administration Tool. So don't understand why I am getting this error.
I have also activated the nquery.log but that doesn't really give me any further information.
[2015-04-28T16:37:22.000+00:00] [OracleBIServerComponent] [TRACE:4] [USER-34] [] [ecid: 4a9e440f990ba0a4:-1995d2c5:14d00d3ef04:-8000-00000000000001c6,0:1:1:5] [tid: 5f] [requestid: 6f11000b] [sessionid: 6f110000] [username: borisdev] -------------------- Query Status: [nQSError: 16002] Cannot obtain number of columns for the query result. [[
[nQSError: 16001] ODBC error state: 60 code: 102 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Incorrect syntax near 'UserName'..
[nQSError: 16001] ODBC error state: 60 code: 8180 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Statement(s) could not be prepared..
[nQSError: 43119] Query Failed:
I was wondering if anyone could shed any light on what could possibly be causing the [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Incorrect syntax near 'UserName'.. error ? And also provide any suggestions on how I can troubleshoot this issue further as I am now completely out of ideas of what to do next having tried numerous things i.e. setting IDENTIFIER_QUOTE_CHAR = '' in DBFeatures.INI which I found in similar posts on the subject all to no avail
Regards,
Tom Rowe

Hi Rajagopal,
Thanks for your reply after doing some further investigations this morning I found and corrected the problem...
The DataDirect Driver does not like double quotes in the query for some reason, testing using the BI Answers generated SQL with the nqcmd tool below...
With double quotes “” it fails immediately
Give SQL Statement: select T18706."Id" as c1, T18706."UserName" as c2 from "ETMS_Users" T18706 where ( T18706."UserName" = 'trowe' )
select T18706."Id" as c1, T18706."UserName" as c2 from "ETMS_Users" T18706 where ( T18706."UserName" = 'trowe' )
[102][State: S1000] [DataDirect][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Incorrect syntax near 'Id'.
Statement execute failed
With double quotes removed for just the columns I now get the Error near ‘ETMS_Users’ which still had the double quotes
Give SQL Statement: select T18706.Id as c1, T18706.UserName as c2 from "ETMS_Users" T18706 where ( T18706.UserName = 'trowe' )
select T18706.Id as c1, T18706.UserName as c2 from "ETMS_Users" T18706 where ( T18706.UserName = 'trowe' )
[102][State: S1000] [DataDirect][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Incorrect syntax near 'ETMS_Users'.
Statement execute failed
With all double quotes removed it works !
Give SQL Statement: select T18706.Id as c1, T18706.UserName as c2 from ETMS_Users T18706 where ( T18706.UserName = 'trowe' )
select T18706.Id as c1, T18706.UserName as c2 from ETMS_Users T18706 where ( T18706.UserName = 'trowe' )
c1 c2
42499 trowe
Row count: 1
Give SQL Statement:
The solution to fix the problem is...
In the BI Admin Tool Physical Layer Database, Properties Features tab is to delete the double quote in the Value column for IDENTIFIER_QUOTE_CHAR, setting this in the DBFeatures.INI file does not resolve the problem possibly it did in earlier versions of the product.
Regards,
Tom Rowe

ReportViewer using SQL Query error states: Incorrect syntax near ','.

Hello Community
    Using Visual Studio 2008 and SQL Server 2008 I created a Windows Application
that uses SQL Server Reporting Services. The application uses ReportViewer and
calls a method written using SQL query.
            1-First I created the form.
            2-Next I dragged the ReportViewer (Toolbox) and Table (from DataSource) onto the form.
The problem is that when it reaches the last line of the SQL query (ie, da.Fill(ds, "TableOne");)
the code fails stating the error message:
            "Incorrect syntax near ','."
     The following is the code behind the form containing the query:
        private void ReportPgm1_Load(object sender, EventArgs e)
            // TODO: This line of code loads data into the 'ReportDBDataSet.TableOne' table. You can move, or remove it, as needed.
            this.TableOneTableAdapter.Fill(this.ReportDBDataSet.TableOne);
            reportViewer1.ProcessingMode = ProcessingMode.Local;
            LocalReport ReportOneLocalReport = reportViewer1.LocalReport;
            DataSet ds = new DataSet("ReportDBDataSet.TableOne");
            pgmReportOne(FromDate, ToDate,   ds);
            ReportDataSource ds = new ReportDataSource("ReportDBDataSet.TableOne");
            ds.Value = dataset.Tables["TableOne"];
            ReportOneLocalReport.DataSources.Clear();
            ReportOneLocalReport.DataSources.Add(ds);
            this.reportViewer1.RefreshReport();
        private void pgmReportOne(DateTime FromDate, DateTime ToDate, DataSet ds)
            SqlConnection connection = new SqlConnection("Data Source=ReportDBServer;Initial Catalog=ReportDB;Uid=sa;pwd=Password");
            string sqlReportOne = "Select ([InDate], [FirstName], [LastName], [AGe]" +
                               "from TableOne";
            SqlCommand command = new SqlCommand(sqlReportONe, connection);
            command.Parameters.Add(new SqlParameter("paramFDate", FromDate));
            command.Parameters.Add(new SqlParameter("paramTDate", ToDate));
            SqlDataAdapter da = new SqlDataAdapter(command);
            da.Fill(ds, "TableOne");
    Why does the last line throw an error?
    Thank you
    Shabeaut

--NOTE: The statement below cannot be run on SQL Server 2012
--If you have an earlier version and can set the compatibility
--level to 80, it can be run.
SELECT sso.SpecialOfferID, Description, DiscountPct, ProductID
FROM Sales.SpecialOffer sso,
Sales.SpecialOfferProduct ssop
WHERE sso.SpecialOfferID *= ssop.SpecialOfferID
AND sso.SpecialOfferID != 1
Hi Scott
The *= is old syntax and not compatible with SQL Server 2012 (as stated in the comments).
You could do something like this instead
SELECT sso.SpecialOfferID
,Description
,DiscountPct
,ProductID
FROM Sales.SpecialOffer sso
left outer join Sales.SpecialOfferProduct ssop on sso.SpecialOfferID = ssop.SpecialOfferID
WHERE sso.SpecialOfferID != 1

Error importing result file from Visual Studio Online load test - Incorrect Syntax near ')'

We are seeing the exact same issue as reported in:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/4a338992-1a46-47ae-9f13-10a53a6264b5/error-downloading-load-test-report-from-visual-studio-service-load-test-incorrect-syntax-near?forum=TFService#cb43383b-c60d-4dcc-a353-352ac6908b35
When clicking on the "Download report" after running a load test using Visual Studio Online an error occurs. The download completes, but the import fails at 15% with the following:
This is happening for 2 different users on 2 different systems.
Any assistance in resolving this would be greatly appreciated!
Let me know if additional information is needed.
Thanks!

Hi,
We are researching your issue. Please clarify my question with detailed information:
1. Do you get the error in your first post when you click ‘Download report’ after you run load test from
Visual Studio 2013 on
team foundation service?
2 You said that ‘I am trying to import the test results into a Visual Studio 2012 (Update 3) on-prem instance’, what and where is
your load test result repository? A SQL Server database or the default database:LoadTest2010 in SQL Express on the same machine with Visual Studio 2013?
3 Whether you specify the load test result repository under Load Test->Manage Test Controller?
4. What error do you get? Please provide us more detailed information about the error message or share us with a screenshot.
5 Whether you can run the load test successfully locally and get the load test result with the same load test result database?
6 You said that your co-worker can work fine. Please check whether your account has enough permissions for load test result database and download load test result from TFS to load test result database based on the account
permission of your co-work.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Incorrect syntax near the keyword 'AND'.

Hi Friends,
I have a requirement from SAP BI to SQL database.
When I am triggering data from SAP BI, it is successfully sent to XI.
In XI, it is also in success.
But when I check in Message monitoring, I faced a error.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ZSaleFromBI' (structure 'Data'): com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near the keyword 'AND'.
The data is not updating in SQL Database also.
Kindly suggest the same.
Regards,
Narendra Goyal

Hi,
After debugging lot, I found a payload difference.
In PI 7.0 Inbound message from BI is:
<?xml version="1.0" encoding="utf-8" ?>
- <n0:MT_OTBData_BI xmlns:n0="http://grmap.com/xi/grmap/OTB_Data_OB" xmlns:prx="urn:sap.com:proxy:BIJ:/1SAI/TAS05A432A314B70F5CEB43:700:2008/01/11">
+ <DataRow>
+ <DataRow>
+ <DataRow>
</n0:MT_OTBData_BI>
In XI 3.0 Inbound message from BI is:
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:MT_OTBData_BI xmlns:nr1="http://grmap.com/xi/grmap/OTB_Data_OB">
+ <DataRow>
+ <DataRow>
+ <DataRow>
</nr1:MT_OTBData_BI>
Kindly provide suggestion to resolve this issue.
Regards,
Narendra Goyal

Timestamp to datetime throws "Incorrect syntax near '00'"

SQLServer 6.5 and Weblogic 6.0 SP2 on NT4.0:
Hi All
Can someone point me the utility which would tell me which version of
the JDBC Driver I am using. I know I am using Type 4 JDriver for
MSSQLServer 6.5 but I want to know the exact version to report the below
problem.
I am trying to insert java.sql.Timestamp values in datetime columns in a
table via a BMP (1.1) and I get this error
From java object
String value =07/11/2001
timestamp = 2001-07-11 00:00:00.0
java.rmi.RemoteException: EJB Exception:; nested exception is:
javax.ejb.EJBException
- with nested exception:
[java.sql.SQLException: Line 1: Incorrect syntax near '00'. Severity 15,
State 1, Procedure 'QCID_SRP_DEV null', Line 1]
Any help would be much appreciated.
Thanks
Madhu

Madhusudan R Chaganthi wrote:
>
SQLServer 6.5 and Weblogic 6.0 SP2 on NT4.0:
Hi All
Can someone point me the utility which would tell me which version of
the JDBC Driver I am using. I know I am using Type 4 JDriver for
MSSQLServer 6.5 but I want to know the exact version to report the below
problem.
I am trying to insert java.sql.Timestamp values in datetime columns in a
table via a BMP (1.1) and I get this error
From java object
String value =07/11/2001
timestamp = 2001-07-11 00:00:00.0
java.rmi.RemoteException: EJB Exception:; nested exception is:
javax.ejb.EJBException
- with nested exception:
[java.sql.SQLException: Line 1: Incorrect syntax near '00'. Severity 15,
State 1, Procedure 'QCID_SRP_DEV null', Line 1]The first answer is to run the command:
% java weblogic.jdbc.mssqlserver4.Driver
This will print out the exact version.
Then, show me. I assume you're dealing with a
java.sql.Timestamp object. If so, would you
show me what it's .toString() method prints out?
I just saw a difference in our 7.0 driver and our
6.5 driver with setTimestamp(). Apparently a bug
was fixed in one but maybe not in the other because
of how infrequently we get 6.5 users nowadays.
Once I see your string, I can make you a new driver.
Joe
Any help would be much appreciated.
Thanks
Madhu--
PS: Folks: BEA WebLogic is expanding rapidly, with both entry and advanced positions
for people who want to work with Java, XML, SOAP and E-Commerce infrastructure products.
We have jobs at Nashua NH, Liberty Corner NJ, San Francisco and San Jose CA.
Send resumes to [email protected]

Problem in the receiver JDBC channel

hi,
I am facing some problem with the receiver JDBC channel which is trying to insert some data in ORACLE DB. My sample input XML file is,
<root>
<statement>
<table>EBILL_CUST_STATE_AGE_HDR2</table>
<CUST_CODE>BA001</CUST_CODE>
<CUST_ADDR>Rental Customer Name 1+Name 2street01+TEL: 0331694100
FAX:0331694103</CUST_ADDR>
<CRD_LMT>1000000.00</CRD_LMT>
<BG_AMT>1000000.00</BG_AMT>
</statement>
</root>
Error stack is,
Exception caught when executing statement for table/stored proc. 'EBILL_CUST_STATE_AGE_HDR2' (structure 'Statement_CUST_STATE_AGE_HDR2'):
java.sql.SQLException: ORA-00917: missing comma
Please help me in solving the issue ASAP.
Thanks,
Soorya

Hi,
It works like this
<ROOT>
<STATEMENT>
<TABLENAME ACTION="INSERT">
<TABLE>EBILL_CUST_STATE_AGE_HDR2</TABLE>
<ACCESS>
<CUST_CODE>BA001</CUST_CODE>
<CUST_ADDR>Rental Customer Name 1+Name 2street01+TEL: 0331694100
FAX:0331694103</CUST_ADDR>
<CRD_LMT>1000000.00</CRD_LMT>
<BG_AMT>1000000.00</BG_AMT>
</ACCESS>
</TABLENAME>
</STATEMENT>
</ROOT>
Please refer the link.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/ae/d03341771b4c0de10000000a1550b0/frameset.htm
Abid Mazhar

Odbc sql server driver sql server incorrect syntax near 'è'

Hello.
An online game I host uses ODBC and SQL.
I'm using SQL Server Management Studio 2012.
I had two errors suddenly appear.
[Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near 'è'
and
[Microsoft][ODBC SQL Server Driver][SQL Server]Unclosed quotation mark after the string ".
Can anyone explain what these are and how I can fix them please.
Kind regards
Zath

Hello Zath,
"Unclosed quotation mark after the string" means there is a Quotation mark missing, like in this query at the end:
SELECT *
FROM sys.objects
WHERE Name like 'sys%
But without knowing your queries it's difficult to say, where & why this occurs.
Olaf Helper
[ Blog] [ Xing] [ MVP]

SQL Server 2005 Problem: Incorrect syntax near '{'

hi, 
 
I am using SQL Server 2005 JDBC driver from Microsoft (sqljdbc_1.0.809.102_enu.exe), there are some problem when calling stored procedure from Database Control: 
 
The following exception flow when parameters of the stored procedure were wrapped to newline : 
 
weblogic.jws.control.ControlException: ControlException on control test2005DBCtrl[Incorrect syntax near '{'.] 
 
Here is the method that generate the above exception: 
 
/** 
* @jc:sql statement:: 
* {call P_dummyProcedure 
 * ( 
 * {intValue}, {value} 
* ) 
* }:: 
*/ 
void callStoreProcedure(int intValue, String value); 
 
But if the parameters were not wrap, the method work fine: 
 
/** 
* @jc:sql statement:: 
* {call P_dummyProcedure 
 * ( {intValue}, {value} ) 
* }:: 
*/ 
void callStoreProcedure(int intValue, String value); 
 
The above problem exist when I change from SQL Sever 2000 to 2005. Both methods is ok for SQL Server 2000 (both the driver from BEA and Microsoft) 
Do any one got the above problem or know why? 
 
cheer ~
 

Wiz Cheng wrote:
hi Joe, 
 
following is a snippet of the config.xml, please see if that cover what you want ~ 
 
config.xml 
---- 
 <JDBCConnectionPool CapacityIncrement="5" 
?? ?? ?? DriverName="com.microsoft.sqlserver.jdbc.SQLServerXADataSource" 
?? ?? ?? InitialCapacity="10" MaxCapacity="100" Name="sql2005Pool" 
?? ?? ?? PasswordEncrypted="{3DES}lF9SivpaSCc=" Properties="user=sa" 
?? ?? ?? SupportsLocalTransaction="true" Targets="cgServer" 
?? ?? ?? TestConnectionsOnReserve="true" TestTableName="SQL Select 1" 
?? ?? ?? URL="jdbc:sqlserver://svr08006\\SQL2005:1533;databaseName=SBI" 
?? ?? ?? XASetTransactionTimeout="true" XATransactionTimeout="300"/> 
 
<JDBCTxDataSource JNDIName="JNDI_SQL_2005" Name="JNDI_SQL_2005" 
?? ?? ?? PoolName="sql2005Pool" Targets="cgServer"/> 
 
 
Thanks ~ 
WizOk, please recreate the pool, telling the console to use the BEA driver for MS.
when it shows you the pool properties, it should show you a URL, something like:
"jdbc:bea:sqlserver://......". Please then edit the URL to add this to the end:
;spyAttributes=(log=(file)spy.log, so the URL looks like
jdbc:bea:sqlserver://......;spyAttributes=(log=(file)spy.log)
Or just make the pool, and then edit the config file.
You should then see the config entry look something like this:
<JDBCConnectionPool CapacityIncrement="5"
DriverName="weblogic.jdbcx.sqlserver.SQLServerDataSource"
InitialCapacity="10" MaxCapacity="100" Name="sql2005Pool"
PasswordEncrypted="{3DES}lF9SivpaSCc=" Properties="user=sa"
SupportsLocalTransaction="true" Targets="cgServer"
TestConnectionsOnReserve="true" TestTableName="SQL Select 1"
URL="jdbc:bea:sqlserver://......"
XASetTransactionTimeout="true" XATransactionTimeout="300"/>
Then please alter the URL line so it's like:
URL="jdbc:bea:sqlserver://......;spyAttributes=(log=(file)spy.log)"
This will generate a file in the server directory called spy.log.
Then when the server boots, please then run the code that would
have caused the problem, as simply as possible, and then send
me the spy.log file.
thanks,
Joe

How to put Stored Procedure in Receiver JDBC channel

Hi all,Good Evening,Iam using a JDBC to JDBC scenario in which I have to move the data from database into XI and we all know that the Interfaces which require stored procedures on Oracle database server for publishing the data needs to be called in combination of BPM & Receiver JDBC adapter.
 In this method, a dummy interface will be created for triggering the process. This interface could be designed using any adapter which works on polling mechanism (sender JDBC/File). Dummy interface will invoke a small BPM designed for each business object. BPM will make a synchronous call to Oracle database by calling underlying stored procedure. Stored procedure will return the result set by using a cursor. BPM will send this result set to target application.
 Now my question is how to put a stored procedure in a receiver JDBC channel which need to collect the data from database when BPM makes a synchronous call.
 Because it is required in my scenario,can any one tell me how and where to put stored Procedure in JDBC receiver channel.
Thanks in advance,
Regards,
Prajwal

Your action should be EXECUTE for stored procedures in Message mapping.
<StatementName5>
<storedProcedureName action=u201D EXECUTEu201D>
 <table>realStoredProcedureeName</table>
<param1 [isInput=u201Dtrueu201D] [isOutput=true] type=SQLDatatype>val1</param1>
</storedProcedureName >
</StatementName5>
action=EXECUTE
Statements with this action result in a stored procedure being executed. The name of the element is interpreted as the name of the stored procedure in the database. If you use the optional <table> element, the value specified here is used as the stored procedure name. This enables you, for example, to define stored procedure names containing non-XML-compatible characters or characters that prevent them from being used in interface definitions in the Integration Builder/PCK. If specified, <table> must be the first element in the block within <dbTableName>.
The elements within the stored procedure are interpreted as parameters. They can optionally have the attribute isInput=u201C1u201C (input parameter) or isOutput=u201C1u201C (output parameter) or both (INOUT parameter). If both attributes are missing, the element is interpreted as an input parameter. The parameter names must be identical to those of the stored procedure definition.
The attribute type=<SQL-Datatype> , which describes the valid SQL data type, is mandatory for all parameter types (IN, OUT, INOUT).
http://help.sap.com/saphelp_nw2004s/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
/people/sap.user72/blog/2005/10/15/jdbc-adapter-execution-mode-chained-or-unchained
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi

Incorrect Syntax near $38.82.0 in Query

Hi all,
I have created a query for FMS in an UDF at AR Invoice to display total tax amount for certain tax group but it keeps saying "1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Incorrect syntax near '$38.18.0'. 2). [Microsoft][SQL Server Native Client 10.0][SQL Server]Statement 'User-Defined Values' (CSHS) (s) could not be prepared."
$38.18.0 - VAT Code
Please check what is the problem with the query below:
SELECT Sum(T0.[VatSumSy]) FROM INV1 T0 WHERE $[$38.18.0] in ('SR','DS','AJS')
Thanks,
Leng

Hi,
Your query works fine.
I got another issue here. If I changed T0.VatSumSy to T0.TotalSumSy to capture the total to be charged on tax rate. The FMS query only reads the tax code in the first row. If the invoice got 2 different tax codes with different rate, it will only capture the first row tax rate.
E.g.
ItemCode
UnitPrice
Qty
Total
TaxCode
TaxRate
TaxAmt
A001
10
100
1,000
SR
6
60
B002
20
200
4,000
ZRE
0
0
I got 2 UDFs with FMS query.
Tax6%
SELECT sum(T0.[VatSumSy]) FROM INV1 T0 inner join OINV t1 on t1.docentry = t0.docentry WHERE RTRIM($[$-38.18.0]) in ('SR','DS','AJS') and t1.docentry = $[OINV.docentry]
Tax0%
SELECT sum(T0.[VatSumSy]) FROM INV1 T0 inner join OINV t1 on t1.docentry = t0.docentry WHERE RTRIM($[$-38.18.0]) in ('ZRE','RS','GS') and t1.docentry = $[OINV.docentry]
UDF with Tax6% comes out 5000 while UDF with Tax0% also comes out 0.
Kindly guide me how to do on the totalSumSy.
Thanks & BR,
Leng

Receiver JDBC Channel Error : Incorrect syntax near 'OR'

Similar Messages

Maybe you are looking for