Receiver Mail adapter with multiple mail ids

Hi Experts,
I am doing File to Mail scenario.
I am generating mail package structure using Java mapping.
Email is not going to multiple mail ids mentioned in To field.
I tried with , and ; but for both it is behaving strange:
When using ,(coma)
in case of multiple receivers:
only last mail id will receive mail in Inbox
when using ;(semicolon)
Every email id person will receive mail but with same name listed under To: that is last mail id.
For example:
To: abc.at.test.com,xyzat.est.com,def.at.est.com
Then only def.at.test.com will receive mail
In case of semicolon(;):
Every mail id will receive mail in Inbox, that is abc.at.test.com,xyz.at.test.com,def.at.test.com
will get mail in their respective mail box, but all mails will have same TO field: def.at.test.com
I hope it is cleared.
If you want I can send outlook mail headers from outlook.
Best Regards,
Divyesh

Hi Divyesh
Refer the below thread. The same problem was being solved.
Mail Adapter - Multiple mail ID and multiple mail servers config.
Here is the Summery:
WRONG: receiver1@server1;receiver2@server2;
CORRECT: receiver1@server1;receiver2@server2
Regards,
Madan Agrawal

Similar Messages

Configuring Receiver mail adapter with dynamic email addresses

Hi,
I'm a newbie to XI and I have problems in configuring the Receiver mail adapter with the "Use Mail package" option selected. I am trying pickup a file (using file adapter on Sender side, picks up a simple XML file) and after mapping in XI, send the message as an email message to dynamic email addresses.
Everything works fine if I did not select the "Use Mail Package". But when I choose that option it errors out. I followed this blog posted on SDN -
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
The following XML message is my source
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/Somenamespace">
   <ns0:Message1>
      <ns1:studentlisttest xmlns:ns1="urn:karthiksender_to_karthikreceiver">
         <Student>
            <studentid>1</studentid>
            <lastname>Studentlastname</lastname>
            <firstname>Studentfirstname</firstname>
         </Student>
         <Mail>
            <From>[email protected]</From>
            <To>[email protected]</To>
            <Subject>Test mail adapter</Subject>
         </Mail>
      </ns1:studentlisttest>
   </ns0:Message1>
</ns0:Messages>
What I want to accomplish is, I have a simple message mapping where the Studentdetails are mapped to, lets say Customer details. For convenience lets keep it simple, StudentId --> Customerid, (student)Firstname --> (customer)Firstname, (Student)Lastname --> (customer)Lastname
I would like to get the Customer details as an XML attachment or in the body of an email with from, to and subject corresponding to that specified in the <Mail> node.
I followed the instructions posted on the blog and it works fine if I don't map the studentdetails to customerdetails. I did multimapping, with one source message (the xml file I posted above) and two target messages (customerdetails and Mail, which is the external definition posted on the blog). I beleive I'm missing something here. Could somebody please guide me through this?
Thanks
Karthik

hi,
I still have not found the solution for this problem. Michal, your blog works fine when my source message has got only the mail details. As per your advice, I tried modified the structure of the xsd file as follows
<xs:schema targetNamespace="http://sap.com/xi/XI/Mail/30"
xmlns:xi="http://sap.com/xi/XI/Mail/30"
xmlns:xs="http://www.w3.org/2001/XMLSchema">

<xs:element name="Mail">
    <xs:annotation>
      <xs:documentation>Mail package for XI - Mail Adapter</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Subject" type="xs:string" minOccurs="0"/>
        <xs:element name="From" type="xs:string" minOccurs="0"/>
        <xs:element name="To" type="xs:string" minOccurs="0"/>
        <xs:element name="Reply_To" type="xs:string" minOccurs="0"/>
        <xs:element name="Content_Type" type="xs:string" minOccurs="0"/>
        <xs:element name="Date" type="xs:dateTime" minOccurs="0"/>
        <xs:element name="Message_ID" type="xs:string" minOccurs="0"/>
        <xs:element name="X_Mailer" type="xs:string" minOccurs="0"/>
        <xs:element name="Content" minOccurs="0">
          <xs:annotation>
            <xs:documentation>any type</xs:documentation>
          </xs:annotation>
        </xs:element>
      </xs:sequence>
      <xs:attribute name="encoding" type="xs:string"/>
    </xs:complexType>
</xs:element>
<xs:element name="MailReceipt">
    <xs:annotation>
      <xs:documentation>Mail Receipt for XI - Mail Adaper</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Server" type="xs:string"/>
        <xs:element name="Format" type="xs:string"/>
        <xs:element name="UseMailPackage" type="xs:boolean"/>
        <xs:element name="Encoding" type="xs:string"/>
        <xs:element name="Subject" type="xs:string" minOccurs="0"/>
        <xs:element name="From" type="xs:dateTime" minOccurs="0"/>
        <xs:element name="To" type="xs:string" minOccurs="0"/>
        <xs:element name="Date" type="xs:dateTime" minOccurs="0"/>
      </xs:sequence>
    </xs:complexType>
</xs:element>
<xs:element name="CustomerlistExternal">
    <xs:annotation>
      <xs:documentation>Customer List</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Customername" type="xs:string"/>
        <xs:element name="Customerid" type="xs:string"/>
      </xs:sequence>
    </xs:complexType>
</xs:element>
</xs:schema>
My source message will be something like
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns1:studentlisttest xmlns:ns1="urn:karthiksender_to_karthikreceiver">
         <Student>
            <studentid>1</studentid>
            <lastname>abclname</lastname>
            <firstname>abcfname</firstname>
         </Student>
         <Mail>
            <From>[email protected]</From>
            <To>[email protected]</To>
            <Subject>Testing Mail adapter</Subject>
         </Mail>
      </ns1:studentlisttest>
   </ns0:Message1>
</ns0:Messages>
I have mapped the <student></student> information to customerlist, with customerid --> studentid and customername --> firstname or lastname (for symplicity). This was a multimapping with one source and two target messages. My test mapping output is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
     <ns0:Message1>
          <ns2:Mail xmlns:ns2="http://sap.com/xi/XI/Mail/30">
               <Subject>Testing Mail adapter</Subject>
               <From>[email protected]</From>
               <To>[email protected]</To>
          </ns2:Mail>
     </ns0:Message1>
     <ns0:Message2>
          <ns2:CustomerlistExternal xmlns:ns2="http://sap.com/xi/XI/Mail/30">
               <Customername>abclname</Customername>
               <Customerid>1</Customerid>
          </ns2:CustomerlistExternal>
     </ns0:Message2>
</ns0:Messages>
So how would I get this part of the <CustomerlistExternal></CustomerlistExternal> part of the message as an attachment to the mail address specified in the <ns2:Mail></ns2:Mail> tags.
I'm definitely not understanding it right and am missing something. Could you give me step by step instructions to acheive this. I apologize for the trouble..this would be of great help to me.
Thanks
Karthik

Billing Documents with multiple mailing address

Experts,
What are all the standard options to generate SD billing documents with multiple mailing addresses. Billing document contents will be same but they will addressed to different mailing addresses.
Have you come across this situation and implemented? Please let me know you expert advide.
Thanks much,
Nagarajan

I assume that
multiple mailing addresses
are fixed.
So, to print a hardcopies of invoice with multiple mailing addresses.
You can have Z table in the system with all the mailing addresses, say,
Bill-to Party
Sr No
Address
100023
01
Chennai Address
100023
02
Mumbai Address
100023
03
Noida Address
Then write a logic in your print program to call the Z Table with address while printing the output.
You can take assistance of ABAPer in your team for this.
Regards
JP

Mail adapter with number of recivers

Hi
Can any1 tell me how to use the reciver mail adapter to send mail to number of recepients ?
thx,Shai

Hi,
Like normal email, each mail id is separated by semicolon (;).
http://help.sap.com/saphelp_nw2004s/helpdata/en/6b/4493404f673028e10000000a1550b0/content.htm
Regards,
Moorthy

HT1539 How can a digital copy be used in a household with multiple apple ids, synced on the same computer?

How can a digital copy be used in a household with multiple apple ids, synced on the same computer? I want to put a digital copy on my device, and on my wife's device.
Please help.

you're welcome.
actually, unless you take an extra step, the first opened swf will close. if you want the 2nd to close, the initial receiving lc will send a message to sender that causes the sender to close.

Can I sign in with multiple apple IDs in a single apple device without deleting my previous one?

can I sign in with multiple apple IDs in a single apple device without deleting my previous one?

Hi swagyoloswag,
Welcome to the Apple Support Communities!
There are several different services that require signing into an Apple ID to use on your iOS device. You can sign into different Apple IDs for different services on your iPhone. For example, Apple ID #1 for iCloud and Apple ID #2 for iTunes & App Store. You cannot sign into the same service with two different Apple IDs at the same time. The attached article has a list of services that are accessible with your Apple ID.
Where can I use my Apple ID? - Apple Support
Cheers,
Joe

Acknowledgement from receiver file Adapter with out BPM

Hi Gurus,
I am trying to get Acknowledgement from Receiver file Adapter with out Using BPM.
Here is the scenario. I am sending files from different Sender Adapters. There is only one target that is File Adapter. After each successfull and failure transaction I need an Acknowledgement that needs to trigger another receiver adapter and send the the file name and timestamp to that file.
Hope this is a complicated scenario. Please help me.
Thanks,
Kevin

from sap note 821267
6. Acknowledgements
    * Q: Does the File Adapter support acknowledgements?
    * A: You need to distinguish system acknowledgements (indicating that a message has been received by the target system) and application acknowledgements (indicating that the message has been successfully processed by the application on the receiver side).
           The receiver of an XI message will only send an acknowledgement back to the sender if the sender has requested one. However, the File Adapter has no functionality that relies on the receipt of an acknowledgement, so it never requests one.
           On the other hand, if a File Adapter Receiver receives a request to send an acknowledgement, it will do so for a system acknowledgement request. Application acknowledgements are not supported at all as the File Receiver has no way to determine if the written file has been correctly processed by the back-end application, which is what a positive application acknowledgement would imply.
this means that your requirement is ideally not possible without a BPM

HT1277 How do I sync Google Apps mail account with Apple Mail 5.2?

How do I sync Google Apps mail account with Apple Mail 5.2?

To add your Google Apps mail account:
1. Select Mail-->Preferences
2. Select the Accounts icon and click the + button in the lower left corner.
3. An Add Account screen should appear
ADD ACCOUNT
4. Add your
Full Name
Email Address, and
Google Apps password
in the appropriate boxes.
5. Click the Continue button and the Incoming Mail Server screen should appear.
INCOMING MAIL SERVER
6. From the Account Type pull down menu, select Exchange IMAP.
7. Fill in the text boxes as follows:
Description: what ever makes sense to you
Incoming Mail Server: imap.gmail.com
Username: [email protected]
Password: Google Apps password
Outlook Web Access Server: www.gmail.com
8. Click the continue button and the Outgoing Mail Server screen should appear.
OUTGOING MAIL SERVER
9. Fill in the text boxes as follows and make sure Use only this server and Use Authentication is checked:
Description: what ever makes sense to you
Outgoing Mail Server: smtp.gmail.com
8. Click the Continue button and the Account Summary screen should appear.
ACCOUNT SUMMARY
9. Click the Create button
10. You're done!

Mail Sender Adapter with multiple sMIME attachments

Hi!
I 'm using XI 3.0 SP 15.
I have problems with my Mail-Sender-Adapter.
The mails, I fetch, contain a certificate and multiple xml-attachments. The xml's represent an IDOC-structure (INVOIC.INVOIC02).
The task is to first check the certificate, and then to send each of the XML attachments separately to an SAP-System.
1) We have twelve partner which use this e-Invoicing interface. How do I administer the certificates and do I have to create for each partner a "Sendervereinbarung"?
2)
The second problem is, that I have multiple payloads which have to be processed separately. How can this be done?
kind regards and thanks a lot for your help
MArtin

As we have multiple xml-attachments, I guess we have a major problem anyway.
I guess Certificate verification in the sebder agreement is done after the Module Processing of the email-adapter isn't it?
Due to the multiple attachments we have to write a customer specific Module for the email-adapter anyway.
I guess the only way is that the module validates the certificate against the J2EE KeyStore and then extracts the various xml attachments to a file share.
A File sender adapter then polls the file share and the sender aggreement / receiver agreement /mapping ... process starts.
The only question is if the file adapter works also without a sender agreement, so that the xml's are stored on the file share
Do you have an idea, if this works? or do you see any alternatives?
thanks alot for your help!!
MArtin

Dynamic attachment name with receiver mail adapter and use mail package

We need to send mapped XML payload as attachment (with dynamic name) to a recepient (recepient email id is part of input xml payload, but not part of the mapped XML payload).
I could probably do this using the adapter module (as per the following link),
http://wiki.sdn.sap.com/wiki/display/XI/Adapter%20Module%20PI%207.0%20Set%20Attachment%20Name?bc=true
I would like to explore if this would be feasible using Mail package and XI payload.I already have a Java mapping that is converting the input XML to required Output format. If I am using Mail package (XI Payload), how do I go about sending this Output XML from java mapping as attachment to email id available in the input payload?

Hi,
1) XML payload as attachment (with dynamic name)
2) recipient (recipient email id is part of input xml payload, but not part of the mapped XML payload)
These two is possible by using Mail Package. You have a standard xsd for mail package which you can download from the SAP Note 748024.
The xml created in you java mapping which will be your attachment should be put into the <content> tag of the mail package xml structure. and the file name can be set in the <Content_Type> tag.
<?xml version="1.0"; encoding="UTF-8"?>
<p2:Mail xmlns:p2="http://sap.com/xi/XI/Mail/30">
<Subject>My Invoice</Subject>
<From>from email address<;/From>
<To>to email address</To>
<Content_Type>text/plain;name="MyFile.csv";</Content_Type> --> file name here
<Content>123;A49;aaa</Content> -> attachment xml here
</p2:Mail>
And you have to select MailPackage in the receiver mail adapter.
Regards,
Aravind

Receiver Mail Adapter with external Email-Provider

Hi everyone,
I have implemendet an Scenario with a receiver Mail Adapter. With using the SAP-Mail-Server it works fine.
Now I want to use an external Email Provider like GMX or yahoo. But the Parameter e.g. smtp://mail.gmx.net does not work.
Is this generally with an external Email Provider possible?
Thanks in advice
Christoph

Hi,
of course it is, but:
your XI has to see the external provider = opened ports
Regards,
michal

Receiver Mail adapter with txt attachment

I'm having a requirement to transfer Text fiels as-is to email as an attachment.
With the study as of now I came to know that if I use mail adapter I can get my payload as XML attachment.
Can we get text file as attachment instead of XML file in E-Mail?

hi das
check the below blogs
eMail Report as Attachment (Excel/Word)
eMail Report as Attachment (Excel/Word)
XI Mail Adapter: An approach for sending emails with attachment with help of Java mapping
XI Mail Adapter: An approach for sending emails with attachment with help of Java mapping
regards
kummari

Mail Adapter - Multiple mail ID and multiple mail servers config.

Hi All
I am doing BPM synch scenario in which i get the response from SAP box and send the response via email adapter. I am using mail.xsd and doing mail config. in message mapping. However in the TO field i am able to give only one email ID. If i give multiple email ID's mail is not received. I tried comma and semi-colon as separator. Still not working? I have two questions in configuring TO option:
1) How to send to multiple id's? I am using Lotus Notes.
2)How to send to multiple mail servers? I have to send to Lotus Notes id's and outlook express id's also simultaneously.
Thanks for your help in advance
Warm Regards
Samuel

Hi,
Please find here with some observations about it,
1) How to send to multiple id's? I am using Lotus Notes.
If you have specified an IMAP server under URL, the message is saved in the specified folder but is not sent to the receiver specified under To.
Then even if Under To, you had specified the e-mail address that will receive the message would be separated with a semicolon. It will not work.
Please verify about it .
The below link will also help you to verify if there is anything missing
Mail Adapter (XI) - how to implement dynamic mail address
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
BPM:Single Sender and Multiple Receivers based on synchronous
exchange(switch) part-1
/people/prasadbabu.nemalikanti3/blog/2006/03/10/bpmsingle-sender-and-multiple-receivers-based-on-synchronous-exchangeswitch-part-1
Generic Message Interface in SAP Exchange Infrastructure Email Integration Scenarios
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00d5a235-4803-2a10-f682-889d67c69975
(If your using Alert Framework then)
If you want to send it to multiple email addresses and all email addresses are user of XI then you can define "Role" and attach that role to everyuser and make this role as receipent of alert .
Thanks
Swarup
Thanks
Swarup

Sender Mail Adapter with PayloadSwapBean

Hello Experts!
I have a Sender Mail Adapter receiving emails with attachments! I'm using PayloadSwapBean, because I have to manipulate (to do mapping) the XML attachment.
Sender Mail Adapter Configuration:
Default Interface Namespace = urn:mynamespace.com
Default Interface Name = abs_async_myInterface
swap.keyName = Content-Disposition
swap.keyName = Content-Description
swap.keyValue = attachment;filename="MailAttachment-1.xml"
swap.keyValue = MailAttachment-1
Well, my problems are:
1) Although my Default Interface Namespace is urn:mynamespace.com, sometimes the namespace that cames to SXMB_MONI is http://sap.com/xi/XI/System/Mail. In that case, an Receiver Determination error happens.
2) My XML can be the first (MailAttachment-1), the second (MailAttachment-2), the third (MailAttachment-3), or any other attachment position. Since my swap.keyValue is set to "MailAttachment-1", I'm able to pick the XML only if it is the first attachment.

Hi Julio,
Writing an Adapter Module for the same can make your task easy.
Thanks'
Sunil Singh

Multiple Mail Domains with multiple IP addresses

Hello,
I am attempting to configure a mail server with 3 domains and 3 distinct IP addresses. I am currently only working with 2 of the domains.
Mail sent to either domain is received by the accounts in both domains: if I send a message to [email protected], it goes to both that mailbox and the [email protected] mailbox. I have user accounts set up in WGM for both domains.
I'm sure I have something misconfigured, but the only instructions I can find for multiple domains assume virtual domains using only one IP address.
postconf -n
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
localrecipientmaps = proxy:unix:passwd.byname $alias_maps
luser_relay =
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains =
mydestination = $myhostname,localhost.$mydomain,localhost,mail.tomsheehan.com,tomsheehan.com,ma il.19north.com,19north.com
mydomain = tomsheehan.com
mydomain_fallback = localhost
myhostname = mail.tomsheehan.com
mynetworks = 127.0.0.1/32,66.216.189.129/32,66.216.189.133/32,66.216.189.134/32,tomsheehan.c om
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions = permit_mynetworks rejectrblclient zen.spamhaus.org permit
smtpdpw_server_securityoptions = login
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_keyfile =
smtpduse_pwserver = yes
unknownlocal_recipient_rejectcode = 550
virtualmailboxdomains =
virtual_transport = virtual
Thanks in advance for any help I may receive!
Scott
iMac Core2Duo 2 GHz, iMac G4 700, iMac G4 800, iBook G3 900 Mac OS X (10.4.9)

Scott,
can you elaborate a bit on the final goal?
There is no need to use multiple IPs to run seperate domains. Virtual domains can handle this just fine.
You could run three different instances of postfix bound to different IPs and different configurations. (postfix -c configdir_touse start) Each config directory would have its own main.cf with the main parameters to be changed being "inet_interfaces", "myhostname" and "mydomains". However, unless you have a very specific need this is just an extra headache.
Alex

Receiver Mail adapter with multiple mail ids

Similar Messages

Maybe you are looking for