Receiving CO073 warning message while creating PM order for a certain equipment

Hello experts ,
Do you have an idea why i receive a warning message : Valuation data is not maintained for valuation type
While entering a piece of equipment in PM order creation screen ?
Before creating the PM order , I've entered company code and specific cost center in the master data of this piece of equipment.
When I erased cost center from equipment's master data ,warning messages disappeared while creating PM order again.
What configuration has to be done for the CO objects ? maybe MM configuration needs to be done like in automatic account configuration ?
but it is strange thaw , equipment is not a material,thus and has no valuation class in his mater data record ....
another problem is: after passing the warning message , in PM order , Location screen , the cost center is not being copied from equipment master record , which contains the cost center.
Pease advice,
Daniel

Hello
Have you assigned Business Area in Equipment Or Work Order.If yes please try remove that try to create the wo
Br
Rakesh

Similar Messages

General Warning Message while creating po

Hi Gurus,
Good Morning.
I want to pop-up a warning message while creating all types of PO saying that "Contact Person & Email ID text should be filled "
This message should be applicable to all PO .
How to create a message and assign in PO ?
Thanks & Regards,
Vikas

Hi Archit,
Thanks for your reply.
How to create a new Text No. & Message Text ? or if i want to use any existing text no & Message Text how can I change the Text Description ?
Thanks & Regards,
Vikas

Pop up warning message while creating PO

Hi,
How to give a Genral or a POP up Warning Message while creating and checking a PO in ME21n and ME22n.
Even i tried in changing the local setting in the menu bar, but it doesnt work.
Help and suggestions will be much appreciated.
Thanks & Regards.
Kumar.

Hi Jay,
I tired with the BADI ME_PROCESS_PO_CUST in the method IF_EX_ME_PROCESS_PO_CUST~CHECK, but still i am able to display only error message not Warning message.
Any suggestion regarding this.....
Thanks & Regards.
Kumar.

Deleated Valuation Type --Need Error Message while creating Purchase Order

Hi,
In our scenario , i need a message should flash , if enduser by mistake select the deleated valuation type while creating Purchase Order.
In current configuration , it's not there.
Await your expert opinion.
Regards
Shyam Kogta

I investigated this recently in our company and gave this answer:
A deletion flag does not restrict anything. It is just an indicator to tell SAP that you want this record to be deleted with the next archiving run.
The archiving run then checks if a deletion is possible or not.
So you can set such deletion flags long time in advance, even at a moment where you still have inventory.
To block materials from beeing used in business transactions, usually the material and sales status are used. But these statuses can only be set at overall, plant and sales organisation level.
In some transactions SAP issues warning messages if a material has a deletion flag. This messages could be customized to be an error and prevent any business. However, this type of restriction is not designed for our machine, as we use the material and sales status.
Anyhow, there is no message for valuation types that have a deletion flag in procurement area.
There is one for goods receipts (but only for a certain industry solution that is not used by us)
There is one for deliveries ( VL 211 ).
The valuation types are defaulted from customizing to the transaction e.g. purchase order. Or from info record to the PO. So a standard purchase order gets valuation type ABC , while an internal order (production) gets the DEF. Usually there should not be a need to change this valuation type manually.
So the only solution is to archive the material master at valuation type level.
But I guess, you already have POs with that wrong valuation type, which means you have to archive the POs first. It you have already batches with wrong valuation type, then thy have to be archived as well before a material can be archived.
And finally if you had stock in current year, then you can archive your material in year after next year, as SAP archives only materials that have no stock in current and previous year.

To get an Pop up message while creating sales order to refer

Hi All,
We have requirement where in a POP UP screen is required to display while creating a Return Order.
The message can be" Please refer this return order to sales order or to the Invoice if required"
Please let me know is there any OSS note for this or Any user exit or any configuration set up...
Since this is Standard SAP and some times return orders are created without referring to any document , we don't want to make reference field MANDATORY while creating Return order.
Thanks
Veerendra

You have to make a user exit in MV45AFZZ for it.
But maybe it is better create 2 return orders: one with mandatory reference and the other without mandatory reference. The user will choose the right one.
From my experience usually popups bore the user that in short time will ignore it always skipping even when usefull !!
Roberto

Duplication of Purchase Order while creating sales orders for a customer

when we try to create sales order for one customer it have to create by picking up the purchase order from the table linearly.
But the problem is that here when we are trying to create multiple sales orders the same purchase order is being picked.
for example..when we create sales order 1 the purchase order picked is PO1 and
for creation of sales order 2 the same purchase order PO1 is being picked up instead of PO2.
No idocs are being generated in this, even to check them..
How shall i resolve this...? Please help me out ASAP

Hi Kumar,
Thanks for the reply. But actually the problem is that this is related to some customized table in the project. When a EDI Batch job runs in the background then automatically the SO is created and the PO is being picked from the table(custom table) and then posted against the respective SO. we are not aware of that job which is triggering this to debug. Once if we can know that particular batch job or pgm or edi or idoc what ever it is then we can debug.
Do you have any idea how can we find that particular pgm/edi/idoc/job name which triggers this creation of SO?

Price error message while creating production order- Urgent

In past i was getting warning message of 'No price could be determined for material/batch and Plant" message no CK 465 at the time of saving the production order after creation but now it has stopped even though there is no price in material amster.
I changed the configuration to Error message (TC: OPR4_PPCO) and it works but why not for warning message?
Thanks

Please confirm where i should check for Activity price?
But then why we are able to get error message.
Reexplain:
Creating a production order which do not have standard cost in material master.
While saving, getting a error message'No price could be determined.......'
Now changing the message to Warning through configuration using TC: OPR4_PPCO
Now again creating the production order and saving
Expectation to have same message as warning but not getting anything.
Thanks
Edited by: vineet garg on May 1, 2008 12:14 AM

Error message & warning message while creating PO

Hi,
I have one requirement like when user create PO with 'critical material',while saving PO,user should get message "critical material".
For this ,in the enhancement MM06E005,EXIT_SAPMM06E_012(functional module),
I have written piece of code
*critical Material by Jaheer,ABAP & MM specialist
LOOP AT TEKPO.
IF TEKPO-MATKL EQ '9068'.
MESSAGE ID 'ZMM' TYPE 'W' NUMBER '013' with TEKPO-MATNR.
ENDIF.
endloop.
Here whenever I put message type 'E',I am getting message "critical material".But I donot want error message ,I want only warning message,so when I changed message type as "W",I am not getting any message while checking My PO.
What is the reason?
please,Can somebody throw some light on this?
With Reg,
Jaheer

Hi
Use the badi ME_PROCESS_PO_CUST, method CHECK, with a coding as this
include mm_messages_mac.
data: header       type mepoheader,
        items        type purchase_order_items,
        po_line      type mepoitem,
        line_item    type purchase_order_item.
header = im_header->get_data( ).
items = im_header->get_items( ).
LOOP AT items INTO line_item.
IF condition IS TRUE. "critical material (line_item-matnr)
       mmpur_message 'W' 'ZMM' '013' line_item-matnr ' ' ' ' ' '.
ENDIF.
ENDLOOP.
I hope this helps you
Regards
Eduardo

What is t-code or path see the error message while creating Purchase order

Hi,
I am creating PO and I have not maintained Info Record.While cretaing PO it is throwing warning message.Now I want to convert this to error message.How to do this.
Regards
Raghavendra Pai

Hi,
You can alter the message at SPRO->Materials management->Purchasing->Environment data->Define attributes of system message.
Here in the system message, go to message number 341, then change category from W to E.
Regards

To through custumize warning messages while creating PO

Hi All,
I want to through some warning message throgh user exit while creating PO is there any standar message id i can use to through warning message i know '00' with number 398 but that is working only for error message.
Regards
Sagar

If you're doing these in an exit, you decide in your code whether A,E,I,W, message type. Beware though, how you present...you might want to do I messages with the "display like E" addition. I utilize message 016 from message class GR a lot...It's just placeholders and you can then issue messages with three or four values, like:
message e016(gr) with
<document> <item> 'text' 'more text'
etc.... mix and match up to four values, literals, constants, text-elements, etc.

Error message while creating production order with KMAT material strategy25

Hi PP Gurus I am running variant configuration cycle...Strategy 25, Custermer Req KEK (KMAT Matrl)
Sales order & MRP Picked the components correctly as per the dependencies
written. So Planned order generated against sale order.
When I tried to convert planned order to Production order...I am getting the
below error message..
Error Message:
You cannot make an assignment to make-to-order stock Message no. CO684
Diagnosis The component cannot be allocated to an individual stock because
make-to-order production and engineer-to-order production cannot be executed
with this order.
A possible cause is that you are trying to create an order with reference to a
sales-order/project, where an account assignment to a sales order/project is not
allowed in the settlement profile that is assigned to the chosen order type.
This is inconsistant.
System response The following responses are possible:
Order processing is cancelled.
The system resets the special stock indicator back to the original value.
Procedure Choose another order type.
I used order type with SD1 as settelement profile.
OVZG: default 046, settlement profile = SD1
OPJH: Settlement profile = SD1
Plz through some light on this if u have worked on Variant Configuration/MTO
settlements.
Question:
1) Is creation of production order with KMAT material supported by SAP?
2) If yes, why the above error occurs?
Waiting for Ur reply
With Best Regards

Dear R.Brahmankar,
I have check on the note, but it is not relevant to ecc6. The current system default setting is :
Standrad setting for reqt class 046
Special Stock E
Acct Assgt Cat. M
Valuation M
Settlmt Profile SD1
However if I change the Acct Assgt Cat. from M to E. It resolve the problem. I would like to know is this the right solution?
Config in Acct Assgt M
Consumption Posting = E
Config in Acct Assgt E
Consumption Posting = ' '
In F1 key of Consumption Posting field it shown following:
To flag the sales order item as cost- and revenue-carrying, enter an "E" (settlement via sales order).
If you do not wish to flag the sales order item as cost- and revenue-carrying, do not enter anything.
Dependencies
If you are working with nonvaluated sales order stock, always flag the sales order item as cost- and revenue-carrying.
If you are working with valuated sales order stock:
In the case of complex make-to-order production, flag the sales order item as cost- and revenue-carrying
In the case of sales-order-related mass production, do not flag the sales order item as cost- and revenue-carrying
Should we change to E?
Regards,
Ong

Error while creating sales order for material with another DIVISION

Hello Friends,
I have a problem with my sales order creation.
I have defined a new sales area 0010 / 10 / 01. I have the sales order type assigned to this sales area. (in VOV8 for the sales order type, in the 'General Control' the 'item division' is flagged.
Now, I have created the sold to party XYZ with all the partner functions defaulted same as the sold to party for the sales area 0010 / 10 / 01.
NOW, I have the material ABC with the DIVISION 10 in the basic data. I have extended the material to my sales org & dist. channel & plant.
Now, while creating the sales order for my sales area 0010 / 10 / 01 , I enter the sold to party XYZ - it is OK. But when I enter the material ABC, I get the error - "SHIP TO PARTY IS NOT DEFINED FOR SALES AREA 0010 / 10 / 10"
Please help to resolve the issue.
Edited by: Vivek on Aug 13, 2009 9:04 AM

Hi
Common division for Material Master data will not work
Because in the material master Division is a field not an organizational unit
Means when you create MMR you will give sales org, DC, Plant as organizational units and then enter but not division
Division is a field maintained in basic data and sales org data 1
This is the reason in t code you will find in t code VOR2 Common division only customer and conditions but not materials
But in t code VOR1 Common DC ,customer conditions and materials all there are available (you can check these t codes)
Coming to your issue Item div is clecked in your order type
This means the division in MMR has the priority or control for that order type
Your header division is 01 ( taken from customers sales area) and item division is 10 (taken from MMR as per your post)
So it differs
To process this order with Item div is clecked in your order type you need to extend your Sold to party ABC to the sales area 0010/10/10 (the sales area where the division of the material falls)
or alternatively
There should be a customer say DEF created in sales area 0010/10/10 who will be a ship to party ( your error is also the same)
for your ABC that is sold to party in sales area 0010/10/01 where the order is registered
Hope yopu are getting it
ABC in sales area 0010/10/01 will have or should have ship to paty DEF in sales area 0010/10/10
or
ABC should operate in in sales area 0010/10/10 too
If item division is not ticked then these are not necessary as the header division 01 will be valid for all items and syatem will not look MMR at all for division
Regards
Raja

The underlying connection was closed: An unexpected error occurred on a receive..Exception.Message - while executing powershell command for sharepoint online site

" +The underlying connection was closed: An unexpected error occurred on a receive..Exception.Message " OR sometimes
"The remote server returned an error: (503) Server Unavailable..Exception.Message"
Getting exception above when performing various operation (site coll creating, group creation, adding users to group) for sharepoint online (Office 365) site using powershell script.
I want to create 3500 site collections using PS script. In-between getting above exception so it will skip one site collection creating and working again. for eg. after creating 11 site coll, script will through above exception and so 12th site coll will
not be create but working fine from 13 and so on...

Remote server seems working to me...any additional check?
if problem with remote server then may be loop to create site provisioning should not start again..Right?
any idea?

Error message while creating configurable material for variant configuration.

Dear All,
I want to create configurable material for the purpose of variant configuration. When trying to create configurable material using mm 01 or mm k1, it is displaying an error message that internal number assignment is not possible for the material type configurable materials as well in using external number also. Can anyone specify the steps to be done in creating the configurable material. Thank you all.
Regards
Akula Sivaji Kumar Madhu Kiran

If you want to set these material type to another group (Which has a internal number and external number range), then you can do it.
In MMNR, Click on the Edit Group.
Then select the material type and click select element.
Then mark a tick option in another group and then press Element/Group.
Then you can see the material type will come under this group.
Now save your entry, and create a material with this material type.

Error message while creating transfer order

Hi Experts,
My objective is to create a transfer order from a transfer requirement programatically.
I am trying to create a transfer order using FM L_TO_CREATE_TR programatically. Prior to this FM, I am calling FM L_TR_CREATE to create a transfer requirement. I am passing this transfer requirement to FM L_TO_CREATE_TR to create a transfer order.
But on execution of L_TO_CREATE_TR , I am getting an error message: THIS SCREEN IS ONLY ALLOWED FOR MANUAL TRANSFER ORDERS as a status message in the program.
Please tell how to solve this.
Thanks,
Sangeeta.

Hi,
Check whether following link is helpful
http://sap.ittoolbox.com/groups/technical-functional/sap-log-wm/lt04-from-lb01-1239928
Regards,
Dhana

Receiving CO073 warning message while creating PM order for a certain equipment

Similar Messages

Maybe you are looking for