Receiving E-Mail and processing it with ABAP

Hi,
We are able to send and receive mail from our SAP System,
i have implement Receiving E-Mail and processing it with ABAP according to following blog
/people/thomas.jung3/blog/2004/09/09/receiving-e-mail-and-processing-it-with-abap--version-610-and-higher
but when we try to send the mail to address which specified for inbound mail processing in sap it's gives me following error
554 tranasaction failed.
and in sap system following dump is generated for mailuser which is for sapconnect.
Runtime Errors         RAISE_EXCEPTION
Short text
    Exception condition "CNTL_ERROR" raised.
Error analysis
    A RAISE statement in the program "CL_GUI_CUSTOM_CONTAINER=======CP" raised the
     exception
    condition "CNTL_ERROR".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
Information on where terminated
    Termination occurred in the ABAP program "CL_GUI_CUSTOM_CONTAINER=======CP" -
     in "CONSTRUCTOR".
    The main program was "RSM04000_ALV ".
    In the source code you have the termination point in line 62
    of the (Include) program "CL_GUI_CUSTOM_CONTAINER=======CM001".
plese help me to resolved this,
regards,
kinjal

Hi Kinjal,
I haven't studied to code , so cannot comment.
Try to post a comment at the blog and divert the author's attention to your question here.
Regards,
Siddhesh

Similar Messages

Transportation of process chains with ABAP variants

Hi,
Could you please help me in finding out how to transport process chains with ABAP variants.
I can transport them, however when transporting them, I overwrite the already existing variants, which is very unfortunate...
Could you please advice.
Thank you in advance!
/Brian

Hi Ramesh,
Option 1:
You can directly create the process chain in Production. Most of the times ppl do have access to create a process chain in Prod. Kindly check whether you have the authorization to do so.
Option 2:-
I did not suggest to delete the old info-packages in QA and Prod. Let them continue to exist but you may not use them once the process chain is in place. You create the process chain, test it and move it up to Prod. I dont' think the new infopackages will hamper your delta load. The delta is not dependent on the infopackage.
If I were you, I would try the second option and if it does not work during testing then go for the first option.
Bye
Dinesh.

My ipod is able to receive new mail and I can read it but I can't respond. the reply icon has disappeared

My ipPod Touch is able to receive new mail and I can read it but I can't respond or forward. The reply icon has disappeared. I am also not able to compose a new message. It's like the whole bottom line on the screen has disappeared. Mail has worked fine until yesterday. How do I get this capability back?

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Mail>the accont and turn it off and turn it back on
- Note the following will delete all mail already download on the iPod:
Go to Settings>Mail>the account and delete the account from the iPod and reenter the settings
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

TS3276 Sent a 22 MB file and since then unable to receive e-mails and the file keeps "ghosting back" to my recovered messages folder. Help!

Sent a 22 MB file and since then unable to receive e-mails and the file keeps "ghosting back" to my recovered messages folder. Help!

thanks for your reply. I appreciate your taking the time to respond.
yes, I thought my limits were 20 MB, but I let my client talk me into trying to send it anyway (won't be doing that again). I actually spent some time with the apple tech support person (who was awsome!) and he had me delete some files from my mail folder in the Administrator folder and changed some settings in my mail prefernces.
Everything is working fine now.

Mail and iPhoto Problems with sending photos.

Mail and iPhoto Problems with sending photos.
I have this problem that started a while ago and seems to be getting worse.
Here are the different scenarios.
-If I try to share a photo to email within iPhoto, it will insert the image file name in the mail message, but no image icon or opened image. In iPhoto Preferences under General I have chosen to use Email Photos using Mail.
-If I choose to use iPhoto to send the photo, it will compose the message and the photo is viewable. If I send the message i can view the photo within the email I sent to myself. Nothing happens when I double click on the photo in the Mail message. Nothing happens when i control click on the photo in the mail message. Nothing happens when I try to drag the photo to the desktop from the mail message. When I try to save attachments from the email and choose a place to save it, the save button is grayed out and it cannot be saved. When I check the mail message it says there is an attachemnt but there is no file size listed.
-If I use the stationary within Mail app I cannot drag a photo into the placeholder, I get a circle with a line through it symbol when I try. It happens if I try to drag a photo from the desktop or from the media browser within Mail app.
-If I drag the photo to the desktop from iPhoto, I can double click it on the desktop and it will open in Preview.
-If I then control click on the same photo on the desktop and scroll to share/email, the generic photo icon will be inserted in the mail message. If i double click the photo icon in the mail message I get a message it can't be opened because it is empty.
-If I drag that same image to the mail message body the same thing happens.
-If I send that email to someone they cannot open the image file.
What I can do:
- I can drag that same image file on the desktop to my dropbox folder and it will upload. From there I can go on my iPad and download the photo and send it through email just fine.
-I can open the same image file on my desktop in Preview, I can copy and paste it into a mail message and the image will be viewable in the mail message by me and by the recipient.
-I can drag that same image on the desktop to my safari browser window and it will be viewable in the page. i can then copy and paste that image into a mail message and it is viewable in the message. I can then send that email message to myself and i can control click on the image and get all my options. It also shows as an attachment with the size of the image file in the mail message.
I can send that message to someone and they can see the photo and open it fine.
-If I send that same email to me I can see the photo within the mail. If I then drag that photo to the desktop I cannot use it again to put in an email as the same problem happens again.
I have tried all scenarios in my user account, another users account and in a guest account. The same happens in all. I am guessing because of this it is not a corrupt preference file, unless all of the preference files are corrupt. The guest user account I added a new email account so it was brand new and still had the problem.
I am stumped, all and any help is appreciated.

Another problem that may be related….
I have Snapz Pro. I used to be able to save the snaps to my desktop or a folder. Now when I take a screenshot and try to save the file to my desktop or a folder on my desktop I get this message "Files cannot be created in the selected location. You do not have permission to write to the selected location. Please choose a different location." I have found that i can only save the file to the clipboard. I have repaired permissions many times and still I have this problem.

Help urgently needed please ! My Iphone 4 is on silent vibration mode, received a call and has frozen with the Iphone unusable and yet vibrating. I have tried switching off, connecting to power, connecting to laptop and removing SIM card ???

Help urgently needed please ! My Iphone 4 is on silent vibration mode, received a call and has frozen with the Iphone unusable and yet vibrating. I have tried switching off, connecting to power, connecting to laptop and removing SIM card ???

Problem solved... just saw the answer in another thread... https://discussions.apple.com/message/13110222#13110222

TS3276 I cannot receive e-mail and there is a "caution" sign next to my inbox?

I cannot receive e-mail and there is a "caution" sign next to my inbox.
Also My printer says it is connected to my WiFi network but will not printer from the Mac

What happened when you took the applicable steps in the support article?

Not receiving e-mail and facebook notifications

Can someone help me??? I am not receiving any e-mail or facebook notifications on my blackberry curve 8530. I took the battery out and also ran a Diagnostics Test that said I was connected. When I tried to run e-mail setting it said "having trouble connecting to server". What can I do???
Solved!
Go to Solution.

Hi and Welcome to the Community!
There is an ongoing major outage...formal information is available here:
http://www.rim.com/newsroom/service-update.shtml
From my experience, this is affecting BIS, BES, and all services that depend on those (BBM, email, AppWorld, web browsing, application access to internet data, etc.). Troubleshooting specific problems during this outage may be pointless.
Once the outage clears, if things are not yet flowing for you, please try these steps:
1) Register HRT
Homescreen > Options > Advanced Options > Host Routing Table > (it does not matter which line is current) > Register Now
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is it possible to create and process PO with the line without value?

Hi,
I am wondering whether is it possible to create and process the PO with the lines without the value?
I was thinking that this process would allow me to better track and understand the pallets which arrive to the site so I have set up the pallet as a material but systems doesn't allow me to order the line (pallet) without value?
Or maybe there is other way which will allow me to track the pallets within the system?
Many thanks,
Sylwia

Dave,
Thanks for the reply. Of all the suggestions I've received this seemed to
be most promising. I gave it a try and the problem is that when I attempt
to save as optimized a message box pops up and says I have to save my
document first. Low and behold when I save it, compression occurs. Even
when I select the options you suggest I'm left with a compressed document.
I'm using Acrobat Pro X
Jeff
From:   Dave Merchant <[email protected]>
To:     Jeff Ross <[email protected]>
Date:   01/06/2011 09:35 AM
Subject:        Is it possible to create and save a .PDF
without any compression to the resulting .PDF?
You don't want the UncompressPDF plugin - that's designed to split out the
COS objects but doesn't remove the Flate encoding (plus if you've never
compiled a plugin before, it's not really the time to learn).
Instead, simply save your PDF file using the PDF (Optimized) file type,
click the Settings button and under "Clean Up" - "Object compression
options", choose "Remove compression". Turn everything else off if you
want to retain the PDF content exactly as it was before.
Your document-level scripts will then be in the file as plain text.

Process chain with ABAP reports included

Hello !
I need help regardin an issue.
I have a process chain with the processes:
1) Start
2) Process type ABAP program -> report that has a wait instruction
3) Process type ABAP program -> report that has a system message , based on a first variant of the report
4) Process type ABAP program -> report that has a wait instruction
5) Process type ABAP program -> report that has a system message , based on a second variant of the report
6) Process type ABAP program -> report that has a wait instruction
7) Process type ABAP program -> report that has a system message , based on a third variant of the report
report that has a system message : has 3 variants
The reports work each individual, but in the chain , when I execute, I must see some system messages and there is nothing
I assigned for the processes the right reports, including the variants for the processes 3, 5, 7.
Do you have some clue? I can't imagine why they don't work in this process chain.
Thank you.

In RSPC transaction -
create your process chain
To include ABAP program --- expand General Services --- Select ABAP program -
drag and drop it in right panel
Create process variant -
provide program name and program variant(if exists)

TWO PROBLEMS:( BLACKBERRY CURVE 9300) 1) Unable to send/receive e-mails 2) black square with a minute hand whizzing round

Hello,
I have a BLACKBERRY CURVE 9300
i would be most grateful if someone could help me with persistent problems, which ive previously enlisted the help of T-mobile to resolve but to no avail.
1) I am unable to send/ receive e-mails, this has been an ongoing problem which seems to sort itself out for a short while then returns, i have been asked to remove e-mail accounts from device and re-boot, and as i say works for a short time then starts again.
2) I have this annoying black square in the middle of the screen with like a second hand whizzing round which can sometimes last ages. I was told by t-mobile this was due to not doing regular device updates, i have since done this and as i type continue to see this symbol.
Any advice/suggestions would be gratefully received.
Thankyou.
Andrew Goodall

The spinning clock is usually an indicator of low memory. Make sure you are completely closing apps your aren't using by using the close or exit option in the menu instead of just backing out of the app with the escape key. Also check your memory after you have rebooted your device. If it is still low then you may have to delete apps you absolutely don't need or use to get memory back.
As for the email issue I am assuming you have a data plan since you have tried to fix the problem with Tmobile. If you haven't done so you may have to re-register your phone on the network and or log into Tmobile's BIS site to resend your service books.

I have bought the adobe acrobat xi but didnt receive e-mail and my cridet card was charged already

dear sirs
I just bouth the acrobat XI but didn't receive any confirmation number nor an e-mail and my credit card was already charged, how can I contact service center@@

click 'still need help' as soon as available, https://helpx.adobe.com/contact.html

Tutorial for Interactive Forms and Print Forms with ABAP

Hi All ,
I am new in Adobe Forms do anybody have any pdf tutorial How -To so as to implement Adobe Forms withh ABAP?
I know about
https://www.sdn.sap.com/irj/sdn/interactiveforms
but i couldn't find any pdf tutorial with ABAP.
Only video tutorial.
I will appreciate any help.
Regards,
Ari

Hi Francois & Preetha,
Please could you tell me wich is the procedure so as to create Print Forms with ABAP.
I understand that i have to create first in transaction sfp
1. create a interface where i must import the data i want to bind in Adobe form
2. create a form where i must include the above interface
and there i have to map the data in the context which i bind in the Adobe form
3.In the layout i open the Designer where i create the PDF form
The question is:
This procedure is right or what else can i do?
Do i need ADS installation for this?
How can i run the form? I push when i created the form the Test(f8) button is there where i must run it?
Do i have to write a Application Programm and were can i write it and how i call it in the interface?
Do i need sth else?
I am talking for printing form.
As you can see i have a lot of questions.
I am new in this technology and Sap so i will appreciate if you help.
Regards,
Ari

On my iPhone 5 I am having a problem sending / receiving e-mails and am receiving the message: the user name or password for "imap.gmail" is incorrect. Despite many attempts I am getting nowhere. Does anyone recognise this problem?

I am having a problem sending/receiving e mail messages on my iPhone 5 and cannot access my account. The message I am receiving is: The user name or password for "imap.gmail" is incorrect.
I do not know what imap.gmail is. I have also lost data which was contained on my diary which I believe is linked to the problem. Does anyone recognise this problem?
Cheers,
Morred

Morred wrote:
I am having a problem sending/receiving e mail messages on my iPhone 5 and cannot access my account. The message I am receiving is: The user name or password for "imap.gmail" is incorrect.
I do not know what imap.gmail is. I have also lost data which was contained on my diary which I believe is linked to the problem. Does anyone recognise this problem?
Cheers,
Morred
imap.gmail is the Google mail server. It doesn't recognize the password that is stored in the iPhone. The problem is that the password or email address you have in Settings for the gmail account is wrong. If you changed the password somewhere else that is the reason. You need to go to Settings/Mail,Contacts,Calendar, tap on the gmail account and enter the correct password. You also need to change it for outgoing mail in Settings.

Ending a process chain with abap program

Hello friends.
Can anyone help me please?
I have a problem with a process chain in BW.
The process chain is triggered by the MF BP_EVENT_RAISE in an custom MF. While the process chain works, the custom MF is monitoring the chain´s log.
This process chain have 2 steps: one is the initial process and the other is a ABAP program. In the abap program there are validations and if exists some error, the program abort and this job (BI_PROCESS_ABAP) is cancelled. The problem is that i have to go to the Tx. RSPC and view the logs fro this chain and in these moment ends th custom MF. In other wors, the MF ciustom ends until i go to the tx RSPC for view the logs.
I need that the program ends the process chain naturally.
Thanks for your help.
Regards.

Hi,
You can end a process chain by seeing the variant name and instance name of teh process chain from and finding its corresponding log id,type of process from the table RSPCPROCESSLOG and then executing the standard FM RSPC_PROCESS_FINISH. Here you will have to give the log id,type of process ,vairant name and instance name alongwith the status of the process chain as R to end the process chains.
If you want to aurtomate it you can do that by creating a Z program which will read LOG ID and teh TYPE of process from table RSPCPROCESSLOG on the basis of variant name and the instance name of the process chain and the execute the function module RSPC_PROCESS_FINISH from inside the program.
Navesh

Receiving E-Mail and processing it with ABAP

Similar Messages

Maybe you are looking for