Recently installed 64 bit iTunes for Windows 7 after system restore. Now I can't sync my Ipod Touch because "library was created by newer version of iTunes." I've gone to iTunes site and got "latest" version with no luck. How can I find very latest vers?

Well, most of details above. But haven done clean (exact order recommended by Apple) uninstall / reinstall. I might have to recreate entire library? Thanks

Similar Messages

ITunes will not open because library was created by newer version???

I am still using iTunes 9.2.1 and am not ready to go with v10.
I tried to open iTunes and got the message:
The file "iTunes Library" cannot be read because it was created by a newer version of iTunes.
I did notice that the last time I opened it, it looked a little different but went on with a sync of my 1st.gen AppleTV and then closed out.
I have not downloaded and upgraded to the newer version 10.
I have never had higher than 9.2.1 so I couldn't help but wonder if in some way I am being forced to go the newer v10.
Harold

I have discovered this:
I could not open iTunes as I previously stated in the normal method.
However, it will open when I created a quicktime movie from iMovies and prepared it for iTunes. When I click on the quicktime movie to play it will open iTunes to play the movie. That is when I see the different icons, etc.
I had something called ‘Ping’ to disable because I care nothing about that.
It does not look the same as I am use to with 9.2.1.
I went to the file menu> about> and low and behold it comes up ITUNES 10.
Remember, I have not downloaded ver.10 at any point so it must have come through a back door somehow.
So, I looked in my applications to see if iTunes app has changed. No, it still shows 9.2.1. I did a search in spotlight for iTunes 10 and nothing shows up. Go figure!
I am not a happy camper at this time and need to hear from Apple about this.
I am not ready to go to v10 and want an explanation.
I am not ready to go with v10 because I wanted to see how it effects my 1st. gen. AppleTV.
I don’t want to loose all the downloads I have on a device that I really like.
The new AppleTV has no hard drive and thus stores nothing as I understand it.
I have many TV programs purchased and stored from the History, Travel and Natl. Geographic, etc. channels.
Harold

My itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?

my itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?

Hello Bebyida,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
http://www.apple.com/itunes/download/
Best of luck,
Mario

I have just just installed a new version of itunes. When i tried to run the new version it came up with the message "The file ituneslibrary.itl cannot be read because it was created by newer version of itunes. Can anybody advise?

I have just just installed a new version of itunes. When i tried to run the new version it came up with the message "The file ituneslibrary.itl cannot be read because it was created by newer version of itunes.
I installed the new version because itunes had not recognised my ipod nano 5G, and told me to reinstall. Itunes selected which version to install, so I don't understand what is going on. To add insult to injury it installed a pile of malware which I am still trying to get rid off.
Any advice would be helpful

Hello Davedamoclese,
Go through the below link to Remove iTunes and all its components from your computer first and then Re-install fresh copy of iTunes on your computer.
http://support.apple.com/kb/HT1923
Note : DO not delete iTunes Library as it contains all your iTunes data, please go through the below link for where it is saved on your computer :
http://support.apple.com/kb/ht1391
You can download the latest version of iTunes from the below link :
http://www.apple.com/itunes/download/

After new update, itunes will not launch says "itunes library. itl" cannot be read because it was created by newer version. What do I do to correct this?

After the newest update, itunes will not launch says "itunes library. itl" cannot be read because it was created by newer version. What do I do to correct this?

See Empty/corrupt iTunes library after upgrade/crash.
tt2

TS1368 itunes library.itl cannot be read because it was created by newer version of itunes

Itunes library.itl cannot be read because it was created by newer verson of itunes. How to fix so I can get inti itunes account on my apple laptop.

See Empty/corrupt iTunes library after upgrade/crash.
tt2

Received this message: "i Tunes Library.itl" cannot be read because it was created bya newer version of Itunes

I was trying to access ITUNES from my desktop in Windows 7 when I received the message: "i TUNES Library.itl" cannot be read because it was created by a newer version of ITUNES...

Typically this happens if you try to downgrade iTunes, but it might be possible for it to occur if the library is corrupt in some way. Either way the solution is to restore your most recent backup or revert to an older copy of the library file as follows.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

TS3297 iTunes library.iTl cannotbe read because ity was created by new version

upgraded from OSX 10.5.7 to OSX 10.6.8; when opening iTunes it ask for OK in terms; oked; when I went to open itunes it gave a message"iTunes can not be read because it was created by a newer version of iTunes"

Actually, I from an article that said: move iTunes Library.xml to desktop and then Trash the iTunes Library.itl, then in ITunes drop down file to import playlist, click on the desktop iTune Library.xml file for import. After that both new Library files show up in the Itunes folder and the world is right. This happened to a friend who is a musician, singer, and song writer( Just won Best songwriter in Portland, OR) She was very up set at not getting to all her. She is all smiles now many years ago I steered her to MACs for her LapTop.
Thanks for your reponse, I hope this did not lose you points. I passed it along to her and she said a freind needed it also.

TS1368 I am getting this error the file i Tunes Library.itl" can not be read because it was created by newer version of i Tunes (what do I do)

I can't open my itunes on my computer

Unless you have attempted to downgrade to an older version of iTunes this is likely to be a sign of a corrupt library. See Empty/corrupt library after upgrade/crash.
tt2

Cannot install itunes. error message i Tunes Library .itl created by newer version

i keep getting an error message when i try to install itunes. It says iTunes Library .itl created by newer version. It says to use 64 bit and that's what i'm doing but i keep getting the same message

Hello albee18520
Download this iTunes and install it to see it the error goes away.
iTunes 11.0.5 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Upgraded to 11.3.1 now can't open library. Won't read. I have an older iMac (2008). Message I get is: cannot be read because was created by newer version of iTunes. Would you like to download iTunes now?' ... so I do and it fixes nothing. OS 10.6.8

Upgraded to 11.3.1 now can't open library. Won't read. I have an older iMac (2008). Message I get is: cannot be read because was created by newer version of iTunes. Would you like to download iTunes now?' ... so I do and it fixes nothing. Same message again. OS is 10.6.8.

Thanks again. The option thing got me further than I've gotten thus far but when I went to choose a library I got that same message.
I do have options. I have 2 iMacs. I can still access my music through 'sharing' and download it onto my newer iMac. Trouble is it doesn't have a CD port and I like to burn. From what I've read about their new Mac portable CD/DVD drive, it's shaky at best. Incidentally, do you know of any drives that work well with Macs and cost less than $89.00?
I've figured out I can download a previous library from my old Mac then upload it from the new one which should put me back in business, but what do I do with the corrupt one that's there now, just trash it? Also, when I do the option key my other choice is Create A New Library. Should I do that and put the good previous library into it?
Thanks a million, I really appreciate your time. I'm an old fogey and computers often mystify me, especially when they lock me out of things for no apparent reason.

I have just reinstalled Itunes but i get an error message @cant read itunes library .jtl Was created by newer version of Itunes

I have just reinstalled Itunes but i get an error message 'cant read itunes library .jtl Was created by newer version of Itunes'
How do I fix?

Unless you deliberately downgraded iTunes at the same time this may be a sign of a corrupt library. See Empty/corrupt library after upgrade/crash.
tt2

I accidentally makerd an intruder and kicked them off with network lock, how do i find them again?

I accidentally makerd an intruder and kicked them off with network lock, how do i find them and add them again?
I can not see them in the network map or anywhere.

timh86 wrote:
I accidentally makerd an intruder and kicked them off with network lock, how do i find them and add them again?
I can not see them in the network map or anywhere.
Hi timh86,
You can't unless it is your own computers. Turn on all your computers and printers. Turn off the Network Lock. Once all are reconnected to the Router, reenable the Network Lock.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

I've recently started to use Numbers but when I try to sync to iCloud it asks me to create a new iCloud account. Problem is I already have one and that's the one I want to use. Looks like I have the same situation on my iphone. Any guidance? Thanks.

I've recently started to use Numbers on my macbook pro but when I try to sync to iCloud it asks me to create a new iCloud account. Problem is I already have one and that's the one I want to use.
Looks like I have the same situation on my iphone.
The only option I'm being given is to create an lCloud account.
Any guidance? Thanks.

The last thing you want is a second iCloud account. Try logging out and back in in System Preferences. If that doesn't work, I'd get AppleCare on the line.
Jerry

I have a windows 7 64 bit os , downloaded Itunes for 64 bit os . Installed , tried to open and it keeps telling me ,The file "itunes Library.itl" connot be read because it was createdy a newer version of iTunes . Can some one help me ?

I have a windows 7 64 bit os . Downloaded and installed iTunes for 64 bit os.Try to open ,it tells me , The file
"iTunes Library.itl" cannot be read because it was created by a newer version of iTunes . Any suggestions ?

zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Recently installed 64 bit iTunes for Windows 7 after system restore. Now I can't sync my Ipod Touch because "library was created by newer version of iTunes." I've gone to iTunes site and got "latest" version with no luck. How can I find very latest vers?

Similar Messages

Maybe you are looking for