Recommended SSD for a DV7-2170US

Hi all,
I bought a OCZ Vertex 3 SSD for my DV7-2170US but Windows 7 is blue screening whilst completing setup.  (Tried everything to resolve it but nothing's working).  My understanding is that AHCI needs to be turned off in the BIOS in order for this part of the setup process to continue and can then be subsequently turned back on after setup has completed.  The problem is the DV7 does not have the BIOS option to turn off AHCI so I'm hooped. 
Does anybody have any recommendations on which SSD brand/model would work with this DV7?
Thanks!

I'm a guru in this area (I do it for clients)  Here's my best advice.  Use SSD for system. Replace optical drive with 7200rpm rotational drive for recording audio.  You can get the bracket from MaxUpgrades.com  Installation is straightforward and the performance is optimal.  They also sell an enclosure for the optical drive you take out.
I've been using Crucial M4 512GB SSDs since release and performance is like day one. However, I only use these drives to READ sample libraries for Kontakt, EastWest, etc.  That is where SSDs excel, not recording audio.  Unless you are recording 16+inputs in one take @192KHz, you don't need high write speed for recording that a 7200rpm drive can't give you.
On that note, I advise you max out your ram.

Similar Messages

  • Recommended SSDs for T530

    Hi,
    I am trying to replace HDD with SDD on my T530..Not sure which one to buy..I wanted to buy a 256GB or 512 GB..Can you please tell Recommended SSD brands?
    Thanks

    I think the 830 is a better solution as far as they go. The 840 eats up endurance cycles quickly at 1/3 rd the rating of the 830 due to the TLC modules used. Unlike magnitic media there is a limit although it should be higher than one might exceed. The NAND can die for repetitive use.
    FYI - http://www.anandtech.com/show/6337/samsung-ssd-840-250gb-review
    T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
    Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
    Windows 7 Home Prem - 64bit w/8GB DDR3

  • Any recommendations: SSD for Late 2008 Macbook?

    I've been searching and found a few 32gb. I'm a writer and do absolutely nothing but write and surf the Internet on this computer, so 32gb should be enough. And since you'll ask why switch to an ssd, I want to know my hard drive is new, quiet, and more durable. I've found some like OWC mercury with 263 258 read/write while others are half those speeds. I also found some double that but SATA3.
    Is it true older MacBooks can't get the sata3 speeds?
    Also if anyone knows, why are some for $100 slower than ones for $50?
    If anyone can recommend one in the $50 range, I'd appreciate that as well. Or even might give a reason why the OWC Mercury isn't as good as it seems.
    Thanks!

    If you want to replace your internal hard drive with an SSD, you'll need more than 32GB. You'll need to include 10%+ of the capacity for OS X systems usage, which is above any files and data that you may have. You may want to add programs in the future, which would need space.  If you download internet video, that takes space.  I would suggest you consider in the 120GB range, as even 60GB may be marginal.
    To see what your macbook can handle, on the menu bar, click the apple on the left side, about this mac, more info, and serial ATA. Note the link speed. 1.5 gigabit is SATA I, 3.0 gigabit is SATA II, and 6.0 gigabit is SATA 3. It should be either SATA I or SATA II. Negotiated link speed is what your drive is currently running at.
    While SATA III drives are supposed to be backwards compatible, I just installed an OWC SSD 6G in our 2010 mac mini, and the negotiated link speed only showed SATA I speed where the mini could handle SATA II speeds. Turns out I needed to use a OWC SSD 3G model, which works great at SATA II speeds.

  • Your recommended SSD for Early 2011 MBP?

    Hi guys,
    I just wanted to get some suggestions on a robust, lasting SSD I can rely on for maybe 2-3 more years.
    My computer is a 15'' Early 2011 Macbook Pro. I'm currently running OS X Yosemite.
    Here are the ones I am looking at:
    1. Samsung 850 Pro http://www.amazon.com/Samsung-256GB-2-5-Inch-Internal-MZ-7KE256BW/dp/B00LF10KNA
    2. Samsung 840 Pro http://www.amazon.com/Samsung-Electronics-2-5-Inch-Solid-MZ-7PD256BW/dp/B009NB8W RU/ref=sr_1_1?s=electronics&ie=UTF8&qid=1416850034&sr=1-1&keywords=samsung+840+p ro
    3. Samsung 840 Evo http://www.amazon.com/Samsung-250GB-2-5-Inch-Internal-MZ-7TE250BW/dp/B00E3W1726/ ref=sr_1_1?s=electronics&ie=UTF8&qid=1416850052&sr=1-1&keywords=samsung+840+evo
    Which of those 3 would you recommend? I got my Macbook Pro new at the end of 2011, and I'd like to use it for another
    2-3 years, especially with Intel Skylake coming out next year or the year after.
    I'd also like to add that I upgraded my RAM from 4GB to 8GB (Crucial) last month.
    Thanks!

    See http://www.macsales.com for memory and SSD upgrade kits.
    SSDs have gone through hundreds of TBs (as in 300-500TB) of torture writes in serious of tests with different makes. There is no reason not to as long as it will fit and may need to be an "M-series"
    PCIe-SSD offer 700MB/sec or slightly better than SATA III performance when using 1x PCIe lanes (as found in Apple's laptops). The actual Mac Pro uses 4x and will likely get an upgraded chip offering 1.4GB/sec soon. Mac Pro can be relied on to work for 4-8 years but they are not quite portable. But they are upgradeable more readily.
    I can't move threads either. Can ask to do so.

  • Ssd for dv7 1243cl

    I am interested in upgrading my laptop's hdd to a ssd to reduce load times and extend battery life.  I cannot for the life of me find the detailed information I need to make my decision on which solid state drive to purchase.  I am looking to see what type of sata connection my laptop uses, I know it doesn't have sata3, but does it have sata2?  Is there a recommended ssd for this model laptop?

    You don't really need to back anything up, ounce your old drive is removed you can simply connect it up through a USB hard drive caddy and drag off what ever you want off of it on to the new drive ounce the OS is installed.
     Or, with out checking, I believe your dv7 has another hard drive bay. With an additional caddy and SATA connector you can install your old drive in there and either drag things over onto the new drive, or leave them there for access when ever you need it. Ounce you have pulled everything off that you want, you can eventually delete the old OS. One thing you will need to save are any product keys and install packages you have, but normally those should be on separate CD's
     You can update the BIOS if you like, but for the most part all that should be necessary is to install teh SSD and boot from an OS install disc.
     It does have 2 bays.
     And a place to buy a hard drive caddy for your old drive.
     http://www.newmodeus.com/shop/index.php?main_page=​product_info&cPath=2_5&products_id=195
     Also, after you install the OS the first thing you want to do is to install the ChipSet driver.
     Click on the link and run AMD's driver finder (the easiest way) and it should bring one up, it will also bring up your video driver as well. It's important to install your ChipSet driver first before anything else, the rest doesn't matter.
     http://support.amd.com/us/Pages/AMDSupportHub.aspx
     Here is also an interesting thing from Newmodeus, might be easier then Macrium reflect if you choose to go that route.
     http://www.newmodeus.com/shop/index.php?main_page=​product_info&cPath=6&products_id=4
     +++++++++++++++++++++++++++++++++++++++++++++++++​+++++++++++++++++++++++++++++++++++++
     Here is a link to all your BIOS versions, I went through all of them and there really isn't anything to do with the running of a SSD, but there are some improvements if you go to Windows 7
     If you're going to flash it Do It Wile You Are Running Vista if you flash it in W7 it may brick your machine.
     Follow these instructions when flashing the BIOS :
     Save the BIOS file to the desk top, do not flash it from a temporary folder.
     Have the battery installed and the adapter plugged in.
     Disconnect everything from the laptop except for the adpater.
     Leave the WiFi button turned on, but disconnect from the internet by shutting off your modem.
     Do not flash it in the event of a power failure eg, a bad wind storm
     Do not touch the mouse pad while the BIOS is being flashed.
     When it appears to be finished and the hard drive light stops flashing, leave it sit for at least 3 minutes before booting up. In most cases it will shut down automatically when it's done.
     http://h10025.www1.hp.com/ewfrf/wc/previousVersion​s?softwareitem=ob-74823-1&cc=us&dlc=en&lc=en&os=21​...

  • Recommende​d SSD for x121e

    Can anyone recommend a 120Gb SSD for a x121e?
    Cheers
    Solved!
    Go to Solution.

    Hello,
    I have had good results with Crucial, Corsair, Intel, Kingston, MyDigitalSSD and OCZ SSDs in various ThinkPads I have used.
    My understanding is that any "standard" 9.5 mm-high 2.5" SSD that operates at SATA rev 2.0 (3.0Gb/s) speeds will fit into the X121e, however, you might want to consider getting a "shorter" 7mm-high SSD in case you want to re-use the SSD in the future in a computer which only has a 7mm high drive bay.  A 7mm high drive fits just fine into a 9.5mm high drive bay, and there's no difference in cost, as the only difference between models is the plastic or metal shell surrounding the circuit board that makes up the SSD.  Likewise, you can also get a faster SATA rev. 3.0 (6.0Gb/s) SSD, but it will only operate at the slower 3.0Gb/s speed.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • What is the best way to use a SSD for Photoshop/photo editing?

    Computer hardware newbie here: I do a significant amount of photo editing work and for a very long time I've experienced Photoshop, Bridge and Photomatix crashing constantly (usually due to insufficient RAM) or just generally taking forever (Bridge took forever to load the thumbnail/preview extractions in a folder full of images, Photoshop took forever to save images and Photomatix took ages to load/merge a set of bracketed photos).  Here are the typical error messages I'd get: http://pastebin.com/J9byczse
    As a professional photographer, constantly running into that sort of thing is quite aggravating, so to hopefully avoid ever having to deal with that again I invested in a new custom built computer.  It's Windows 7 Professional 64 bit with 32GB of RAM and a 240GB SSD; I'm using the 240GB SSD as my boot drive/OS, all of my programs are installed there, and the page file.  My photos and data are stored on several HDDs.  I have yet to install any of my photo editing software (Photoshop CS6 Extended, Lightroom, Photomatix etc) to the new computer yet since I'd like some advice first.
    My basic question is this: what is the best way to take advantage of the SSD (and the computer in general) when it comes to my photo editing software?
    Specifically...
    1. If I have a folder of photos I'm working on, should I move it to the SSD and then work on them from there in order to take advantage of the speed of the SSD?  Would this make any difference in terms of speed if the photos are located on the SSD vs. an internal/external HDD?
    2. Most of what I've read online seems to recommend two separate SSDs, one for installing/booting the apps and one for cache/scratch.  Does it matter if I use my 240GB SSD for both?
    3. This is a fairly new computer and the SSD is already almost half full (102GB used, 120GB free) *WITHOUT* any of my photo editing software installed yet.  I'm concerned about how fast that remaining 120 GB may fill up.  As it fills up will I lose the speed advantage of the SSD vs. a regular HDD?
    4. Sort of similar to #3, but should I bother moving any of my other non-photo editing programs/caches off of the SSD to a HDD and would there be any major difference in the speed/lifespan of the SSD if I did so?  It's mostly Firefox and Chrome and their caches that I'm concerned may be a problem if they remain on the SSD.
    Thanks for any help!

    If you have an SSD you can run the cache and programs on the same drive.  However, many recommend a scratch disk size of 100-200 gigs so that will not work here unless you opt for a larger SSD.  Otherwise an internal spinner is recommended that does not contain the program files, or idealy any other files that may want to get acessed at same time (only one read/write head per drive).
    With 32 gig of RAM you may not need the constant use of the scratch drive unless working on large images with lots of layers.  So see no advantage to moving folder to SSD for temp work environment.
    From what I read the new crop of SSD do not have the wear problems of the older versions.

  • Which ssd for my macbook pro?

    Hi community.
    I have a Macbook pro 13" model number A1278 which is now running 8gb of Kingston memeory and I was thinking of upgrading the drive to an ssd. I want to continue with the Kingston brand and would like to go pretty big in capacity, hopefully future proof as much as I can. Anyone tell me which one or maybe a website where can I go to get the right ssd for this particular model?
    Many thanks.

    I know you said you're thinking of Kingston, but I really have to recommend OWC's SSDs:
    http://eshop.macsales.com/shop/SSD/OWC/
    I've been using a 120GB Electra for a while now and it's fantastic.  You'll find that their SSDs are very well reviewed, especially when it comes to their ability to maintain consistent speeds over their lifetime.  And as for future-proofing: they're all SATA3, and come in sizes up to 1TB.
    Of course, if you want a Kingston, I'm sure you'll find one that meets your needs.  SSDreview.com has reviewed several of their drives in the past few months.
    HTH.

  • Is it possible to install a 250GB SSD in a DV7-3160us?

    Hello,
    After struggling to install a Samsung 840 250GB SSD in my DV7-3160us, it has dawned on me that this may not be possible. Is there a known issue with SSD's as the primary drive in this model? Is the 250GB size a problem?
    If this size SSD is allowable as a primary drive, perhaps someone could suggest a straightforward procedure to replace the original HDD with this SSD. I tried using the secondary drive bay to migrate the contents, but that didn't work because the SSD wasn't recognized by the BIOS or Windows. This may be due to the peculiar nature of the second bay on this model. Then I tried cloning the HDD onto the SSD in a desktop machine. The cloned SSD wouldn't boot when installed in the notebook's primary bay.
    So what's the best approach to installing an SSD in this model? Thanks for your help.

    Hello torgy,
    If you look at your Hard Drive & SSD manual (it is at the very bottom of the list), it should help answer your questions.
    Please let me know if this helps.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • What is the biggest bottleneck on this machine - CPU, GPU, RAM (now at 8GB), or the HD, and would I be better getting a current 27" iMac, a 2012 Mac Mini, or SSDs for my current Mini?

    I currently have a 2011 Mac Mini Server. When using FCP X, what is the biggest bottleneck on this machine - CPU, GPU, RAM (now at 8GB), or the HD, and would I be better getting a current 27" iMac, a 2012 Mac Mini, or SSDs for my current Mini?
    Thanks people,
    TZ

    Hi Tom,
    I just wanted to ask you about what you said about the color correction. To be quite honest I'm not sure what the best workflow is, and I haven't gotten my feet wet in multi-cam editing. Basically my work-flow has been.
    1) Import from the camera as optimized media - I found that adding color-correction at the import stage cause a severe hang with my tape-based Canon unit.
    2) Color-correct the imported files before loading any files into a project
    3) Drag files onto the timeline
    4) Click on the color-correction box
    5) Start editing - Usually I have one camera zoomed a little tighter on the singer, one on the whole band, and my iPad or iPhone camera at different angles so I start cutting things according to who is the focus of the moment, add a Ken Burns effect every here and there, Titles, an occassional transition effect.
    6) Add music effects after the looks are taken care of
    7) Export
    Are you recommending clicking on the color-correction box after everything is done?
    Thanks - TZ

  • OWC 120GB Mercury Extreme Pro 6G SSD Solid State Drive Best SSD for a Mac?

    ive read that OWC is the best for mac. Is this true. what is your recommendations for a SSD for an 08' Macbook

    Yes. Your model has a SATA II bus that only supports up to 3 Gb/s drive interfaces. Thus, there is no point in spending more for a SATA III drive. If you expect you will soon want to move the SSD into a new model that does support the faster interface, then be sure the 6G model is downward compatible with the 3G bus. Most, but not all 6G SSDs are, so it's best to ask first.

  • [URGENT] SSD for design & photo editing

    I'm about to buy a new laptop with the following specification
    - Intel i3 2350M
    - 8GB DDR3 PC-1066
    - Intel HD Graphics 3000
    - 120GB Intel SSD 335 as primary internal drive
    - External 2.5" HDD with USB 2.0 enclosure
    I want to use this laptop for my primary graphic design job, which will require many and many read & Write data, both for page file and of course the file data itself. I will use Adobe Photoshop for editing.
    1st Scenario:
    - I use SSD for OS, apps and scratch disk and also for temporary data file during the editing process.
    - The external disk will always be the data disk. After I finish editing the file, I will copy it back onto my external disk.
    2nd Scenario:
    - I use SSD for OS and apps.
    - The external will be the scratch disk and data disk, so I won't copy it onto my SSD.
    My questions are:
    1. if I use the 1st scenario, how about my SSD? how can I prevent my SSD from damage?
    2. for the 2nd scenario, how long my SSD will last, and how will my laptop performance be? since the external disk only have USB 2.0
    connection.

    If you have an SSD you can run the cache and programs on the same drive.  However, many recommend a scratch disk size of 100-200 gigs so that will not work here unless you opt for a larger SSD.  Otherwise an internal spinner is recommended that does not contain the program files, or idealy any other files that may want to get acessed at same time (only one read/write head per drive).
    With 32 gig of RAM you may not need the constant use of the scratch drive unless working on large images with lots of layers.  So see no advantage to moving folder to SSD for temp work environment.
    From what I read the new crop of SSD do not have the wear problems of the older versions.

  • SSDs for 2008 Mac Pro

    I'm thinking about buying an SSD for my Mac Pro (see specs in my signature), any recommendations?  I've been a big fan of products from OWC in the past, so I'm considering their Mercury line.  On the other hand, Crucial drives are a bit cheaper (especially on Amazon).  Question: would there be any point in my getting an M4 from Crucial rather than a V4?  My understanding is that the primary difference is the 6gb/s vs. 3gb/s transfer rates, but that my Mac Pro can only handle 3gb/s anyway.
    I'm still on Snow Leopard for now, but I'm looking into whether or not Mountain Lion will be a worthwhile upgrade for me--still not sure about compatibility of certain key apps in my workflow.

    The main improvement in performance in a Mac Pro is establishing a boot drive with only System, Library, Applications and the hidden Unix files including paging/swap.
    The bulk of the performance increase is not from the speed of the Boot Drive, but from what it is NOT doing -- it is not moving the Data Drive heads away from your data files to go "snacking" for system files or Paging in the middle of your production work. At a cost of tens of milliseconds for every access plus that much time again to get back to the Data areas.
    ANY separate drive will produce the majority of  the improvement.
    A faster drive will produce a slight incremental improvement. A low-latency SSD will produce another slight incremental improvement. These incremental improvements will be most perceptible in a very slightly faster boot-up time and very slightly faster Application launch times.
    You are concentrating on the absolute LEAST important issues, that will have the smallest, possibly not even perceptible performance impacts.
    My Advice: Get a Boot Drive that is cheap and live happily ever after.

  • 7mm SSD for Lenovo X200?

    Hey
    I want to replace my old HDD with a SSD. So I discovered that the Lenovo X200 need a 7mm SSD. But I can't find one. I know that Lenovo deliver the X200, X201,X220 with SSD. So does somebody know which model they use? Or a model that fits?
    Solved!
    Go to Solution.

    Alios,
    look at this thread and my post:
    http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/Which-SSD-for-x220/m-p/471495#M26596
    Also http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/Any-recommendations-of-7-mm-SSD-for-X220/m-p/4...
    x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
    x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
    Do it well, worse becomes itself
    Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

  • Looking for SSD for my 4 year old X220

    Even though my boss and coworkers say I should buy a new laptop, I prefer to keep my X220 and my mini dock 3.
    Are these %100 compatible and recommended SSD's?
     Crucial M550 256GB mSATA Internal Solid State Drive CT256M550SSD3
    www.amazon.com/Crucial-256GB-mSATA-Internal-CT256M​550SSD3/dp/B00IRRDJ4W
     Crucial MX200 250GB mSATA Internal Solid State Drive - CT250MX200SSD3
    www.amazon.com/Crucial-MX200-250GB-mSATA-Internal/​dp/B00RQA6LFA
    I read somewhere else that Crucial might be preferred instead of Samsung EVO's in mSata.
    What are you guys using on your X220? I can't find any other brands/models than these 3 listed here.
    • X220, Intel i5 2540M, 12.5", IPS, Bluetooth, Fingerprint, Camera, 6-Cell, Win 7, Intel 6205
    • S405, AMD A6-4455M, 14", 4GB RAM, Win 8

    Good choices, though - keep x220 and install msata SSD.
    Both drives are based on the same controller, fast enough, at the same time 256 GB version of MX200 is one of the fast drive with such capacity and even faster then SSDs with bigger size due to its architecture. Also it's one of leader of massmarket 256 GB storage.
    Note, you'll not get full performance from both drives because of x220 supports SATA II interface only in the msata slot (drives above has SATA III interface, backward compatible with SATA II).
    Due to my conservatism, I prefer Intel, so you see their drives in my signature. Nevertheless, for your choice are Micron, Plextor, MyDigitalSSD, Corsair... Not OCZ. But Crucial is a very good choice.
    x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
    x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
    Do it well, worse becomes itself
    Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

Maybe you are looking for

  • INVALID SERIAL IN LIVETYPE :(

    I just bought Final Cut Express HD 3.5 from the Apple store, installed it, and now when i want to launch LiveType, it asks for first and last name, etc. and serial number. when i enter the serial number, it says that its invalid. but i still can use

  • Should I reposition a UITableView lower within a UITableViewController

    I am fairly new to the UIKit and asking the following to make sure I'm not reinventing the wheel. My app is fairly simple, an underlying UINavigationController with several UITableViewController's pushed on as needed. The behavior I'd like to simulat

  • IWeb short URL "trick"

    I've been reading a number of posts about how to arrive at a shorter URL for iWeb sites; many seem to involve either using some other site or registering a domain name - I administrate five already, I don' need no more steenkin' domains. Anyway,... I

  • Oracle10g with Workspace Manager

    Has anyone used Workspace Manager in 10g? I'm trying to draw the line between workspaces and version tables. Can someone please shed some light on this. Thanks, Bobby

  • XSU - Mapping element names that exceed max length for oracle identifiers

    Hello everyone, I am trying to load an XML file in relational tables using XSU. While I have figured out on how to do it, I have two questions: 1) Is it possible to load data of an element, the name of which exceeds 32 characters in a column the name