Reconciliation / Load from Resource

Hey all,
I have two LDAP resources.
LDAP1 I can reconcile OK
LDAP2 reconciles and IDM accounts created but all the users are deleted from the resource, the same is true if use the 'Load from resource' option.
Both are using identical per-account workflows, userform etc.
Any ideas out there gratefully received.
Phil

Hi boomers,
I have similer requirement. If you have done it. Please throw some light on it.

Similar Messages

Load from Resource in IDM 5.0 SP5

I have installed IDM 5.0, SP 5, with Sun Java System Application Server 8. I have 2 resources, one LDAP (Sun Directory Server 5.2, SP 3) and one Active Directory.
I have just completed a 'Load from Resource', and loaded user information from the LDAP resource, which created 43 thousand or so user objects in IDM. I have 2 questions:
1. The load took a loooong time - 1 day, 4 hours. Is this normal? I am currently loading information for approximately 19 thousand accounts from the AD resource, which looks like it will take a similar amount of time per account (still running at the moment).
2. Now, when I select the 'Accounts' tab in the admin console when logged in as configurator, the list of accounts never appears. The browser session (mozilla) will die after about 2 minutes. The only way I can view user account information is to select the stop button in the browser immediately after selecting the 'Accounts' tab, and then select the 'Find Users' button on the left hand pane.

The load of the AD accounts (21,000) has now finished. This took 23 hours!!
I have analyzed, to some extent, the load process, from the LDAP perspective, and what appears to be happening is:
1. IDM queries LDAP for the number of account entries defined by the block count (1000 in my case) in the IDM resource definition. I suspect this is being done with an ldapsearch, perhaps with the -x and -S options, as the LDAP log details a query, then a sort on uid EVERY time the 1000 entries are retrieved. This, however, is only a minor part of the issue, as the sort takes about 5 minutes on the LDAP server. This would only account for about 200 minutes of my 1day, 4 hours.
2. After the block of 1000 is retrieved, IDM seems to go off into limbo for about 1 hour each time, with the appserverDAS process consuming about 30-40% CPU. I have an oracle database for the indexes, and that seems to be pretty relaxed during this time - there is some activity, but not in any real anger like the application server.
I can't analyze what's going on with the AD load, as I am not the custodian of the AD servers, and prefer to know as little as possible about them ;-)
I suppose this is not too much of a problem, as I will only performing the 'load from resource' once when we go into production, but I am concerned about the impact of a reconcilliation. I will start one immediately, and respond with itming when it finishes.
As for the list of users, how can I stop the account list from being the first thing accessed when I select the 'Accounts' tab? I would prefer not to have to import all accounts into a separate org just to facilitate access to the interface.
BTW - to be consistent with the documentation, shouldn't the references to 'Accounts' within the interface really read 'Users'. As I read the documentation, a 'User' is an IDM object which may (or may not) have resource 'Accounts'. If they are to be referred to as 'Accounts', then the two Users 'Configurator' and 'Administrator' should not appear there, as they do not, by default, have a resource equivalent. Or maybe I'm just a pedant :-)
Anyway, thanks for any help you can provide.

Load From Resource Issue

Hi Friend,
I am loading data from LDAP to my SIM using Load from Resource option. But when ever I get users there first name and last name become accountID. I want user uid should accountID in IDM.
Can some guru throw some light on it
Thx

I mapped accountID to CN. I changed it and mapped it back to uid
Thank you
Vivek Shashwat

Load from resource attributes.

Hello,
I want to do a Load from Reasource (IdM7). When I start it I specify my input resource (a db table) and a form which should process all the input records. The form, for each input record, creates a new user ad some accounts on assigned resources.
I am guessing how should I refer to the input resorce attributes inside the form: should they be referenced as accounts[INPUT-RESOURCE].attribute or something else?
TIA

I mapped accountID to CN. I changed it and mapped it back to uid
Thank you
Vivek Shashwat

Load from resource and Reconciliation question

Hi Friend,
I am pulling accounts data from LDAP resource to IDM but when I am pulling accounts I want them to copy in XXXX org.
Can some one guide me how to achieve it in both situation.
Thanks
Shashwat

Hi boomers,
I have similer requirement. If you have done it. Please throw some light on it.

Is it possible to load REMOTE resource module from an Air application ?

Hi All,
Am trying to load remote resource module swf file from an AIR application, am not able make it work,am getting the following error
code:
eventDispatcher = ResourceManager.getInstance().loadResourceModule(remoteURL);
ERROR:
"Unable to load resource module from ".
Please help me out..
Thanks
J Kishore

This might help you out: http://aaronhardy.com/flex/loading-a-remote-module-into-a-local-app/

AR can't be added-Error "Failed to load from XML resource"

Hi Everyone,
I need help with this error. When entering an item and then tabbing in an AR document, this code appears.
"Failed to load from XML resouce".
Thanks,\
Debbie

Hello experts,
I am facing this issue in SBO 9.0 PL 08.
Using SBOdemoUS, clic 'Duplicate' an existing Sales Order, then select a Business Partner, and hit 'yes' to the question in order to refresh rows with new BP info. You will get red bar error 'Failed to load from XML resource - (UI_API 7004) [Message 66000-6]' and it wipes out all the copied rows info. Does not happen with BPs that don't have default Ship To info.
Your advise please.
Thanks

When text is then load picture from resources

Hello,
I am looking for a code that can help me .
I want to show a picture from resources in a picture box when label1 text is :
If label1.text is something else then show Nothing
If Label1.Text = ("Three cats sitting in row, each cat has got 2 cats beside it, how many cats are there in total?") Then
PictureBox1.Image = My.Resources.Desert
End If

Hello,
I am looking for a code that can help me .
I want to show a picture from resources in a picture box when label1 text is :
If label1.text is something else then show Nothing
If Label1.Text = ("Three cats sitting in row, each cat has got 2 cats beside it, how many cats are there in total?") Then
PictureBox1.Image = My.Resources.Desert
End If
Since you have to set the .Text property using code, then use that as the test - and set the PictureBox's .Image property accordingly.
...unless I'm missing something here?
Still lost in code, just at a little higher level.

Load from ODS into InfoCube gives TIME-OUT runtime error after 10 minutes ?

Hi all,
   We have a full load from ODS into InfoCube and it was working fine till the last week upto with 50,000 records. Now, we have around 70,000+ records and started failing with TIME_OUT runtime error.
   The following is from the Short Dump (ST22):
   The system profile "rdisp/max_wprun_time" contains the maximum runtime of a
program. The current setting is 600 seconds. Once this time limit has been exceeded, the system tries to terminate any SQL statements that are currently being executed and tells the ABAP processor to terminate the current program.
The following are from ROIDOCPRMS table:
   MAXSIZE (in KB) : 20,000
   Frequency       : 10
   Max Processes : 3
When I check the Data Packages under 'Details' tab in Monitor, there are four Data Packages and the first three are with 24,450 records. I will right click on each Data Package and select 'Manual Update' to load from PSA. When this Manual Update takes more than 10 minutes it is failing with TIME_OUT again.
How could I fix this problem, PLEASE ??
Thanks,
Venkat.

Hello A.H.P,
The following is the Start Routine:
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BIC/AZCPR_O0400, /BIC/AZCPR_O0100, /BIC/AZCPR_O0200.
DATA: material(18), plant(4).
DATA: role_assignment like /BIC/AZCPR_O0100-CPR_ROLE, resource like
/BIC/AZCPR_O0200-CPR_BPARTN.
$$ end of global - insert your declaration only before this line   -
The follow definition is new in the BW3.x
TYPES:
BEGIN OF DATA_PACKAGE_STRUCTURE.
     INCLUDE STRUCTURE /BIC/CS8ZCPR_O03.
TYPES:
     RECNO   LIKE sy-tabix,
END OF DATA_PACKAGE_STRUCTURE.
DATA:
DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
       WITH HEADER LINE
       WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
           MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
           DATA_PACKAGE STRUCTURE DATA_PACKAGE
USING    RECORD_ALL LIKE SY-TABIX
           SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line        -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
   clear DATA_PACKAGE.
   loop at DATA_PACKAGE.
      select single /BIC/ZMATERIAL PLANT
         into (material, plant)
         from /BIC/AZCPR_O0400
         where CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID
         and ( MATL_TYPE = 'ZKIT' OR MATL_TYPE = 'ZSVK' ).
       if sy-subrc = 0.
          DATA_PACKAGE-/BIC/ZMATERIAL = material.
          DATA_PACKAGE-plant = plant.
          modify DATA_PACKAGE.
          commit work.
       endif.
       select single CPR_ROLE into (role_assignment)
                     from /BIC/AZCPR_O0100
                     where CPR_GUID = DATA_PACKAGE-CPR_GUID.
        if sy-subrc = 0.
          select single CPR_BPARTN into (resource)
                     from /BIC/AZCPR_O0200
                     where CPR_ROLE = role_assignment
                     and CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID.
               if sy-subrc = 0.
                  DATA_PACKAGE-CPR_ROLE = role_assignment.
                  DATA_PACKAGE-/BIC/ZRESOURCE = resource.
                  modify DATA_PACKAGE.
                  commit work.
               endif.
          endif.
       clear DATA_PACKAGE.
       endloop.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line         -
Thanks,
Venkat.

An Error Message when loading a Resource.properties File

Hi, all:
I tried to load a Resources.properties file in a JSP page:
<%@ page import="java.util.*" %>
<%
ResourceBundle rb = null;
try {
rb = ResourceBundle.getBundle("Resources");
} catch (MissingResourceException e) {
rb = null;
throw new RuntimeException("The resource is missing!");
%>
Test
When I run it, I got the following error message:
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
Any ideas what's going on here?
Thanks
Jeff

Hi,
I had a similar error just a few days ago. I could solve it by replicating the datasources again and activating the transfer structures via rs_transtru_activate_all. After that the load went fine.
regards
Siggi

Slow loading from internal HD

My iMac seems to have started taking ages to load so I tried loading from an external Firewire drive (a copy of the iMac HD made using SuperDuper Backup).
The results were as follows (approx):
1) From entering password to answering mouse click
iMac internal HD 1min 50 secs
Firewire HD 25 secs
2) Loading Firefox
iMac internal drive 2 min 40 secs
Firewire HD 25 secs
I would have expected the results to be the other way round. I am right in thinking that an internal drive should be quicker?
Disk utility doesn't report any faults and I've tried erasing and reinstalling the internal HD but with similar results.
Does this mean that the internal drive is about to fail or is there some other explanation?
I'm using a 700 Mhz PPC G4 with 384 MB SDRAM and Mac OS X 10.4.11

Those symptoms can also suggest a too-full hard drive. This is especially noticeable if you have only a small amount of physical RAM installed (384MB is a bit small for 10.4 IMHO--I prefer a min of 512MB for that OS version).
Low RAM means the system wants to write data to the hard drive. If the hard drive is too full, Virtual Memory takes longer find the qualifying storage blocks it needs. If it consistently can't find proper blocks on the hard drive, you can get a crash.
You should take a look at the list of articles on this site:
http://thexlab.com/faqs/faqs.html
It's an excellent resource. Focus on those articles with "maintenance" and "troubleshooting" in the title.

Help! FCP X freezes at loading compressor resources

I purchased compressor 4 and it is installed in my applications folder. I went to restart FCP X and the splash screen for FCP X stays on the screen saying "loading compressor resources" and won't go away. I can quit the program via Command-Q, but am unable to do anything else. I have rebooted, wiped .plist files, but no luck...any ideas?

I have FCP7 installed. If that is the problem, then I am stuck with it for now. I have a huge amount of legacy projects, which I need to keep.
It is such a strange error, because everything seems to load, the elements and projects are all showing and just at the end it seems to lose contact with the external hard drive, which is a WD firewire 800. It actually still has a hold on it, because I can't dismount it at that point, because it says it is in use by FCPX. I haven't tried to see if I connect it with usb the problem might go away, although I saw that as a suggestion.
Actually in its latest reincarnation, FCPX doesn't hang, it just says there are no projects or elements because the hard drive has disappeared from its list. It sometimes works to then force quit fcpx, and tell it not to save the window settings and then restart it. It seems almost random as to if it loads properly or not. Doesn't matter if I am running 10.6.8 or 10.7. whatever. It is not so uncommon a problem, because there are a lot of posts about it. I haven't found the definitive post with a fix though.
I am now thinking of duplicating the project to a differnt external drive and then dismounting the external drive I have been using.

Assign loading / handling resource to location through ABAP program

Hello Experts,
I have a requirement where by I have to assign loading / unloading resource to a location through ABAP program. Need to assign the resource in Resources Tab in TP/VS section. Is there any function module or any method available to this?
Responses highly appreciated. Thanks in advance
Regards
Sandeep Patil

Hi all
I have the same requirement for the end user.
Is it a good idea update active Table of ODS behind an ABAP Program Z?, I understood that you can't have log history... and you can't delete request.. because you will not generate this..
We actually have one ODS that contain invoices... all the fields that contain the invoice..like material, vendor, etc.. was updated according to ABAp programa that we specify on start routine, each time that we need to update these fields we need to unload fros ODS to PSA and load again with dtp...
Let me copy more details:
Actually, we have an DSO that is updated each week, we load the information into different PSA, all of this PSA pass to ODS for one info source and transformation rule, in this transformation rule we have an ABAP rotine that have some validation and assign some values for different fields.
In this procees everthing look fine, actually If we need to update this information from DSO (that was loaded and the user need to update some fields) we need to download information from DSO to PSA and load again with DTP process, this was fine.
Actually the user want that this kind of changes will be apply on line, this mean that for example all the invoices that I have actually loaded into DSO need to be analyzed and update according new parameters that they specify in other tables.
The DSO is standard, and contain three basis tables, active, delta, modified.
My question is: Is it possible update directly table of active records of DSO with one Z program?? is it a good idea?, We want to discard the option of unload and load information each time that they need to update certain field that are calculated or updated whit the transformation rule or load.
Than you for your help.

Loading from library conflicts with loading external swf

I'm very new to ActionScript, so this might be incredibly basic. However, I've Googled and read myself into a coma and I'm not finding a solution.
I have a movie with 6 navigation buttons. Four of them load external .swf slideshows, and they work fine - as each file loads, the previous one clears the stage, etc. The other button that I currently have set up is loading, from the library, an image. The problem I'm having is that the slideshows replace each other on the stage - they're not stacking, they're replacing - but when the user selects the button that loads the image, the image overlays the last-selected slideshow. If the user selects the image first, the image is visible when two of the external files transition. Because of that 6th button, which is not yet even started, it's not desirable to me to simply set up the single image as another external file; if it's at all possible, I need to be able to pull from a library file when I build that last button.
What I'd like to do - because there is no logical order that the buttons should be selected in - is figure out how to tell every button to remove the image file on click. I've tried using this in the four buttons that link to the slideshows, to deal with the image (that's the one called quoteImage):
if(myLoader != null && contains(quoteImage)){
myLoader.removeChild(quoteImage);
which has the advantage of not giving me any errors, but doesn't actually fix my problem. I've tried many, many other things, and I'm just really stumped on what exactly I need to do to make this work the way I want it to. Based on the fact that the books and online resources I've been using don't really cover this specific example, I suspect it might be an incredibly idiot thing to do, but I'd really like it to work this way if that's possible.
The code as it stands, with the global variables and the first two buttons (the next three are identical to the second button and the sixth button doesn't exist) looks like this:
var myLoader:Loader=new Loader();
var quoteImage:Bitmap;
stop();
// Loads quoteImage from library
btnQuotes.addEventListener(MouseEvent.CLICK, showquote);
function showquote(event:MouseEvent):void {
var myBitmapDataObject:myBitmapData = new myBitmapData(500, 350);
var quoteImage:Bitmap = new Bitmap(myBitmapDataObject);
quoteImage.x=150;
quoteImage.y=180;
addChild(quoteImage);
// Loads industrial.swf from external file
btnIndustrial.addEventListener(MouseEvent.CLICK, showindustrialcontent);
function showindustrialcontent(event:MouseEvent):void {
var myURL:URLRequest=new URLRequest("industrial.swf");
myLoader.x=150;
myLoader.y=180;
myLoader.load(myURL);
addChild(myLoader);
Help is very much appreciated.

I see now how to import and display a library class object
using:
var MovieClipClass:Class =
Class(loader.contentLoaderInfo.applicationDomain.getDefinition("myLibraryAsset"))
var movieClip:Sprite = new MovieClipClass();
addChild(movieClip)
But this seems to only work for SWF's published for AS3 Flash
Player 9.
I need to do the same for SWF's published with AS2 Flash
Player 7.
Any ideas?

Find out where class was loaded from

Is there a way to find out from what resource the java runtime loaded a class from? I know that -verbose:class argument will tell where classes were loaded from during runtime for only normal sun libs (core libraries from rt.jar), but it does not say where it is loading external stuff from. Can this be found out?
For example, if a particular third party class is available several times (through accidental redundancy in classpaths)-- find out which resource it was taken from.
I am sure you could get down into the weeds and look thorugh all the classpath entries for which ones contain which classes-- but there has got to be a better way.

import java.io.File;
import java.net.JarURLConnection;
import java.net.URL;
import java.net.URLDecoder;
private File getPathToClass(Class c)
     try
          URL url = getClass().getResource(c.getName() + ".class");
          if( url.getProtocol().equals("jar") )
               JarURLConnection jarCon = (JarURLConnection)url.openConnection();
               url = jarCon.getJarFileURL();
          File file = new File(URLDecoder.decode(url.getPath(), "UTF-8"));
          return file;
     catch(Exception e)
          return null;
}

Reconciliation / Load from Resource

Similar Messages

Maybe you are looking for