Record 2 :Value 'Mani ' (hex. ' ') of characteristic 0RSTT_UNML contains in
good after noon sir/mam
i have faced problem in data loading time ,it shoes error
Record 2 :Value 'Mani ' (hex. ' ') of characteristic 0RSTT_UNML contains invalid characters
please give solution
Its because of lower case letters.
Either edit in PSA to caps and load or if its for too many records write a routine (field level) in transformation to convert to uppercase.
You can use the statement
Translate <field> to UPPERCASE
Hope this helps.
Similar Messages
-
Value '#' (hex. '') of characteristic 0customer contains invalid characters
Value '#' (hex. '') of characteristic 0customer contains invalid characters
I didn't get the error message when I am loading into ODs.The error occurs only the ODS to Cube load.
RSKC transaction -I have values
ALL_CAPITAL+/=1234567890~`@#$%^&*()_-{}[]\|'";:?.>,<
Other than ABAP routine is their anyway can I handle the invalid characters.
Because I am loading millions of records in the transaction.I can't Manually update in the PSA.
Advance ThanksHi
I am surprised why you have not faced this problem while loading to ODS. I guess your ODS is not ON for BEx Reporting. Anyways, You need to write a transfer routine for 0CUSTOMER.
Just replace ZZZ with you transfer structure field.
DATA: L_USER_ALLOWED_CHAR TYPE RSALLOWEDCHAR,
L_ALL_ALLOWED_CHAR(140) TYPE C,
L_RESULT_STR_LEN TYPE I,
L_STR_INCREMENT TYPE I.
CONSTANTS C_SAP_ALLOWED_CHAR(58) TYPE C VALUE
' !"%&''()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ'.
IF L_ALL_ALLOWED_CHAR IS INITIAL.
SELECT SINGLE * FROM RSALLOWEDCHAR
INTO L_USER_ALLOWED_CHAR
WHERE ALLOWKEY = 'S'.
CONCATENATE C_SAP_ALLOWED_CHAR
L_USER_ALLOWED_CHAR-ALLOWCHAR
INTO L_ALL_ALLOWED_CHAR.
ENDIF.
RESULT = TRAN_STRUCTURE-ZZZ.
TRANSLATE RESULT TO UPPER CASE.
L_RESULT_STR_LEN = STRLEN( RESULT ).
L_STR_INCREMENT = 0.
WHILE L_STR_INCREMENT <> L_RESULT_STR_LEN.
IF NOT RESULT+L_STR_INCREMENT(1) CO L_ALL_ALLOWED_CHAR.
RESULT+L_STR_INCREMENT(1) = ' '.
ENDIF.
ADD 1 TO L_STR_INCREMENT.
ENDWHILE.
Hope this helps
Regards
Pradip -
Value 'KIRBYu00A0' of characteristic 0SORTL contains invalid characters
hello experts!
i am facing this error while activating 0vendor. data not available either in info object master neither in psa.
Error Message: Value 'KIRBY ' (hex. '004B004900520042005900A0') of characteristic 0SORTL contains invalid characters
Message no. BRAIN060
Diagnosis
Only the following standard characters are valid in characteristic values by default:
!"%&''()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ.
Furthermore, characteristic values that only consist of the character # or that begin with ! are not valid.
You are trying to load the invalid characteristic value 1. (hexidecimal representation 004B004900520042005900A0).
Procedure for System Administration
Try to change the invalid characters to valid characters.
If you want values that contain invalid characters to be admitted into the system, make the appropriate setting in BW Customizing. Refer to the documentation describing the requirements for special characters and the possible consequences.
For more information on the problems involved with valid and invalid characters, click here.
regards
vijayHi Vijay,
after KIRBY is a characteristic value which cannot be interpreted by BW properply / is not in the valid char list.
KRIBY is hex value 004B0049005200420059
the invalid char is hex value 00A0 -> online hex converter didn't found a ASCI match.
To solve the problem you will need to fix the record in the source. Or you go to PSA -> delete all in teh field and re-enter KRIBY.
Best regards,
Axel -
Value '05uFF71uFF7BuFF8B ' for characteristic ZJLEG_PPL contains invalid characters
Hi,
One of our Master data attribute load is failing with the following error message.
Value '05アサヒ ' for characteristic Z_PPL contains invalid characters
As you see there are some Japanese characters when it is trying to load into Char string?
Can we load such characteristics?
Where can we check which all Languages are installed in the system?
If we want to maintain these to the Special characteristics in RSKC transaction?
Can we enter these characteristics using English keyboard?
Regards
AjayHi Ajay
Some time in the run time environ ment field values are moved to junk chars .
In this case even if u r traying to place the same char in RSKC also it wont
accept..
So in this can just edit that particular error record like in the ordinary process in
the PSA.other wise if its a master data u need to select the option error handling
in the info pak and rerun the info pak..
Hope itz clear a little atleast...!
Thanks & Regards
R M K
***Assigning pointz is the only way of saying thanx in SDN ***
**Winners dont do different things,they do things differently**
> Hi Although,
>
> We do have same Characteristics maintained to QA and
> Production.
>
> But when I load the Same data in QA it is successful
> but it is failing in Production.
>
> Regards
> Ajay -
Value '! u2018Hex. '0021characteristic ZORG_INPT contains invalid characters
Dear ALL Expert,
In BI 7 Environment while loading data from psa to Cube I getting error in DTP( Value '! u2018(Hex. '0021 ') of characteristic ZORG_INPT contains invalid characters ). Please guide me regarding is error
regards,
raviHello Ravichendra,
I had a same problem and i have resolved by writing a abap routine in update rules below.
$$ begin of routine - insert your code only below this line -
CALL FUNCTION 'SCP_REPLACE_STRANGE_CHARS'
EXPORTING
INTEXT = COMM_STRUCTURE-EQUIPMENT
INTEXT_LG = 0
INTER_CP = '0000'
INTER_BASE_CP = '0000'
IN_CP = '0000'
REPLACEMENT = 32
IMPORTING
OUTTEXT = RESULT
OUTUSED =
OUTOVERFLOW =
EXCEPTIONS
INVALID_CODEPAGE = 1
CODEPAGE_MISMATCH = 2
INTERNAL_ERROR = 3
CANNOT_CONVERT = 4
FIELDS_NOT_TYPE_C = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*fill the internal table "MONITOR", to make monitor entries
result value of the routine
RESULT = v_eqp.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
Regards
Sankar -
Catalog error : Index of values is missing for characteristic PLANTu0092
Error" Index of values is missing for characteristic " in mapping
Hi
We are in SRM
I was trying to transfer Master records to catalog using
BAdi : BBP_CCM_CHAR_MAINT but Im getting an error Index of values is missing for characteristic PLANT.
Plant has multiple value.
Ive following code in the method ENHANCE_CTY_DEF
ls_char_definition-char_name = 'PLANT'.
ls_char_definition-char_datatype = 'CHAR'.
ls_char_definition-MULTIVAL_INDICATOR = 'X'.
APPEND ls_char_definition TO et_char_definition.
Following code in the method VALUATE_PRODUCT
**"plant data
v_index = 1.
ls_char_valuation-char_name = 'PLANT'.
LOOP at t_plant into WA_plant.
ls_char_valuation-char_value = WA_PLANT-PLANT_1.
IF WA_plant-PLANT_1 is not initial.
ls_char_valuation-MULTIVAL_INDEX = v_index.
APPEND ls_char_valuation TO et_char_valuation.
v_index = v_index + 1.
ENDIF.
ENDLOOP.
Can anyone tell me how to resolve it. Ill definitely reward points to any useful answer.
-JoeHi
Have you raised any OSS message with SAP yet ? If no, raise one immediately.
Meanwhile, try this ->
<u>It seems the Following code in the method VALUATE_PRODUCT
has some problem -></u>
**"plant data
v_index = 1.
ls_char_valuation-char_name = 'PLANT'.
LOOP at t_plant into WA_plant.
ls_char_valuation-char_value = WA_PLANT-PLANT_1.
IF WA_plant-PLANT_1 is not initial.
ls_char_valuation-MULTIVAL_INDEX = v_index.
APPEND ls_char_valuation TO et_char_valuation.
v_index = v_index + 1.
ENDIF.
ENDLOOP.
Try changing the code - like this ->
**"plant data
LOOP at t_plant into WA_plant.
v_index = sy-tabix.
ls_char_valuation-char_name = 'PLANT'.
ls_char_valuation-char_value = WA_PLANT-PLANT_1.
IF WA_plant-PLANT_1 is not initial.
ls_char_valuation-MULTIVAL_INDEX = v_index.
APPEND ls_char_valuation TO et_char_valuation.
ENDIF.
ENDLOOP.
Some SAP OSS notes to refer ->
<b>Note 850613 - Maintaining the BBP_CCM_CHAR_MAINT BAdI using Customizing
Note 875039 - BBP_CCM_CHAR_MAINT: Valuating predefined characteristics
Note 724097 - Search of the comp. in case of structured characteristics</b>
Do let me know.
Regards
- Atul -
BO XI 3.1 DeskI report Calculation mismatch in record values
Hi ,
I have an Calculation issue in one report after migrated from BO 5.1.6 to BO XI 3.1.
After refreshing two reports parallelly, BO XI 3.1 report 1st 3 records of two columns are not at all there in BO 5.1.6 report.
in XI 3.1 i am getting 3 more records compare 5.1.6.
And out of that one column recod values is not matching with 5.1.6, but these record values Sum of total is matching.
(Ex: Here is the report output im getting with mismatches
BO XI 3.1 BO 5.1.6
Age Value
0 5
3 5
4 5
5 5
6 5
temp 5
Total 5
BO 5.1.6
Age Value
6 1
temp 4
Total 5
I have checked for the filters,hided columns, formulas. Both are looking same.
Cany anyone suggest me for a solution.
Thanks in advance,
KrishnaIm trying to copy the output im getting again, format is getting changed after i submit
BO XI 3.1 BO 5.1.6
Age Value Age Value
0 5 6 1
3 5 temp 4
4 5
5 5
6 5
temp 5
Total 5 Total 5 -
SAP-R/3- In which table, numeric values stored in equipment characteristis
SAP-R/3- In which table, numeric values stored in equipment characteristis are captured.
In AUSP table Char values in equipment characteristics are captured against object number.But this table does not cappture numeric characteristics.
Are these numeric values captured in any function module?Hi
check the BAPI for characteristics
BAPI_OBJCL_GETDETAIL
BAPI_OBJCL_CHANGE
or use the fun module:
CLAF_CLASSIFICATION_OF_OBJECTS.
You can use the tables
CAWN,INOB and AUSP to get the characteristics
Regards
Anji -
Open Script how to Retrive Databank record values
Hi,
I am trying get a value from Open script and then assign it to a variable for validation.
Can anyone let me know if either of the below possible using Open script
1) Getting Total column count in a Databank file.
2) Getting a field value and assigning it to a variable.
I know that getDatabank("") has some options but it does not include the above mentioned also this has {{DatabankName.FieldName, Recorded Value}} for setting a value while running. Apart from these options are there any other keywords using which we can retrive a databank field values and assign it to variables.
Also there are utilities through which we can access a csv file. But how to assign the value to a Variable.
Example:
Table table = utilities.loadCSV("Directory with File name");
Row row = table.getRow(0);
getLogger().info(row.get(Field Name));
I am looking to get the value and assign it to a variable example Variable1 = row.get(Field Name).
Thanks
Open Script User
Edited by: Openscript User 100 on Oct 20, 2009 4:03 AMhi,Kate,
Do you resolve this problem?
And here i'm trying to compare two column values in the if () {} condition,for example:
String headerNum1 = eval("{{db.po_tsk_0002b_1.headerNum}}");
String headerNum2 = eval("{{db.po_tsk_0002b_2.headerNum}}");
info(" 2_headernum is :"+ headerNum2);
info(" 1_headernum is :"+ headerNum1);
if(headerNum2 !=headerNum1 ){
fail("The headerNum column is not the same with the header.");
I can see in the result window,it show:
2_headernum is :1
1_headernum is :1
Error in section Run at line (script.java:47). Failure when running child script po_tsk_po0002b. Caused by: The headerNum column is not the same with the header.
Can anyone tell me why?
Thks. -
How to select last record or first record value in a formula?
Post Author: d111
CA Forum: General
I am using a query in a report that in addition to other columns, has a column of month labels like:
There are no unique identifiers or sequence fields that can be used. There is only 4 columns: the label and 3 percent columns.
Jan07Feb07Mar07Apr07etc.
I would like to show the range of months I am using in a label on the report showing the last and first records value. like: "Jan07 to Jun07".
I can not see how to use the functions maximun or minimum since it sorts the months alphabetically.
I would like to use a formula to just grab the first and last record. I can't seem to find any information on this anywhere.
Please advise and thanks.Post Author: bettername
CA Forum: General
Hmm... I suspect what you actually want is the minimum and maximum dates in the report, rather than the first and last records (even if they do happen to come out in date order). So you need to convert the text dates to real ones, and then pick the min/max values.
If so, try these:
Formula "ConvertToDate" (for details section) which converts your text field into a real date - suppress it once placed!:
//Since you have 2-digit years, this conversion assumes that all your dates are >=year 2000
numbervar the_month;if left({YourTable.YourField},3) = "Jan" then the_month:=1 elseif left({YourTable.YourField},3) = "Feb" then the_month:=2 elseif left({YourTable.YourField},3) = "Mar" then the_month:=3 elseif left({YourTable.YourField},3) = "Apr" then the_month:=4 else
//...etc etc you fill in the rest!
if left({YourTable.YourField},3) = "Dec" then the_month:=12;
date(tonumber("20"+right({YourTable.YourField},2)), the_month, 1);
Formula "Show Date Range" (for anywhere on the report) to show the min/max values of the dates;
totext (minimum({@ConvertToDate})) + " to "+totext(maximum({@ConvertToDate}))
If, however, you really just want the first and last records, and you want it at the top of your report as a title (eg: in the Report Header), then I can't see how it can be done without using a subreport that looks at the same dataset, but only displays the first and last records (using the formulas below).
Stick this in the details section, and call it "HoldRecords" and suppress it:
whileprintingrecords;stringvar first;stringvar last;if recordnumber = 1 then first:={YourTable.YourField}; //if its the first record that crystal is displaying, store it in a variableif recordnumber = count({YourTable.YourField}) then last :={YourTable.YourField} //and again, but for the last record
Now create another formula, and put it into the report footer:
evaluateafter({@HoldRecords});stringvar first" to "stringvar last //will display "Jan07 to Apr07"
NOTE: if you have the report ordered by anything, this'll throw the record numbering, and therefore the first and last records, therefore... urgh.
Hope this helps... -
Numeric or value error: hex to raw conversion error , pls help
I am having problem with a sproc which accepts a Raw parameter.
I have a table called Profile:
CREATE TABLE PROFILES
PROFILEID INTEGER NOT NULL,
USERID INTEGER NOT NULL,
PROFILE RAW(255)
and a sproc named addprofile
CREATE OR REPLACE PROCEDURE addprofile
profile IN RAW,
userName IN VARCHAR2
AS
userId INT;
BEGIN
GetUserIdByName( userName, userId);
INSERT INTO Profiles
( ProfileID,userId , profile )
VALUES ( Profiles_ProfileID_SEQ.NEXTVAL,AddProfile.userId ,
AddProfile.profile );
END;
I am calling the Ent Library's Insert profile method which is part of DbProfileProvider.cs (Security App block). It is trying to persist a serialized profile object into the database.
private void InsertProfile(string userName, byte[] serializedProfile,
Data.Database securityDb, IDbTransaction transaction)
DBCommandWrapper cmd = securityDb.GetStoredProcCommandWrapper
(SPAddProfile);
cmd.AddInParameter("userName", DbType.String, userName);
cmd.AddInParameter("profile", DbType.Binary, serializedProfile);
securityDb.ExecuteNonQuery(cmd, transaction);
I get the following error:
Any suggestion on what needs to be changed to get this working? thanks!
Exception Details: Oracle.DataAccess.Client.OracleException: ORA-06502: PL/SQL: numeric or value error: hex to raw conversion error ORA-06512: at line 1
Stack trace:
[OracleException: ORA-06502: PL/SQL: numeric or value error: hex to raw conversion error
ORA-06512: at line 1]
Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure)
Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, String procedure, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src)
Oracle.DataAccess.Client.OracleCommand.ExecuteNonQuery()
Microsoft.Practices.EnterpriseLibrary.Data.Database.DoExecuteNonQuery(DBCommandWrapper command)
Microsoft.Practices.EnterpriseLibrary.Data.Database.ExecuteNonQuery(DBCommandWrapper command, IDbTransaction transaction)
Microsoft.Practices.EnterpriseLibrary.Security.Database.DbProfileProvider.InsertProfile(String userName, Byte[] serializedProfile, Database securityDb, IDbTransaction transaction)
Microsoft.Practices.EnterpriseLibrary.Security.Database.DbProfileProvider.SetProfile(IIdentity identity, Object profile)
[InvalidOperationException: Error saving the profile for the following user 'test'.]
Microsoft.Practices.EnterpriseLibrary.Security.Database.DbProfileProvider.SetProfile(IIdentity identity, Object profile)
EntLibSecuritySample.DFO.Security.SecurityHelper.SetUserProfile(IIdentity identity, Object Profile) in C:\DFO\Sample\Security\EntLibSecuritySample\SecurityHelper.vb:285
[ApplicationException: An error has occurred saving profile object to Datastore. See stack trace for further information]
EntLibSecuritySample.DFO.Security.SecurityHelper.SetUserProfile(IIdentity identity, Object Profile) in C:\DFO\Sample\Security\EntLibSecuritySample\SecurityHelper.vb:287
EntLibSecuritySample.ProfilePage.cmdSaveProfile_Click(Object sender, EventArgs e) in C:\DFO\Sample\Security\EntLibSecuritySample\profile.aspx.vb:59
System.Web.UI.WebControls.Button.OnClick(EventArgs e)
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
System.Web.UI.Page.ProcessRequestMain() +1292Harsh,
I am not a user of the Enterprise Library so I can not speak to the specifics of that. However, here is a short sample that is based on the information you've provided. Perhaps it will be useful.
Database:
create table profiles
profileid integer not null,
userid integer not null,
profile raw(255)
create or replace procedure addprofile
p_profileid in integer,
p_userid in integer,
p_profile in raw
as
begin
insert into
profiles (profileid, userid, profile)
values (p_profileid, p_userid, p_profile);
end;
/C# code:
using System;
using System.Data;
using System.Text;
using Oracle.DataAccess.Client;
using Oracle.DataAccess.Types;
namespace HarshTest
/// <summary>
/// Summary description for Class1.
/// </summary>
class Class1
/// <summary>
/// The main entry point for the application.
/// </summary>
[STAThread]
static void Main(string[] args)
// connect to local db using o/s authentication
OracleConnection con = new OracleConnection("User ID=/; Pooling=False");
con.Open();
// create command object and set properties
OracleCommand cmd = new OracleCommand();
cmd.Connection = con;
cmd.CommandText = "ADDPROFILE";
cmd.CommandType = CommandType.StoredProcedure;
// parameter object for profileid
OracleParameter p_profileid = new OracleParameter();
p_profileid.OracleDbType = OracleDbType.Int32;
p_profileid.Value = 1;
p_profileid.Direction = ParameterDirection.Input;
// parameter object for userid
OracleParameter p_userid = new OracleParameter();
p_userid.OracleDbType = OracleDbType.Int32;
p_userid.Value = 1;
p_userid.Direction = ParameterDirection.Input;
// create a byte array for the raw value
ASCIIEncoding encoder = new ASCIIEncoding();
byte[] byteArray = encoder.GetBytes("TestProfile");
// parameter object for profile
OracleParameter p_profile = new OracleParameter();
p_profile.OracleDbType = OracleDbType.Raw;
p_profile.Value = byteArray;
p_profile.Direction = ParameterDirection.Input;
// add parameters to collection
cmd.Parameters.Add(p_profileid);
cmd.Parameters.Add(p_userid);
cmd.Parameters.Add(p_profile);
// execute the stored procedure
try
cmd.ExecuteNonQuery();
catch (OracleException ex)
Console.WriteLine(ex.Message);
// clean up objects
p_profile.Dispose();
p_userid.Dispose();
p_profileid.Dispose();
cmd.Dispose();
con.Dispose();
}Maybe the part about creating the byte array is what you are missing...
- Mark -
Cannot map control record values from payload w/XSLT after SP13 upgrade
Hi!
Since we upgraded to SP13, the mapping of control record values form the XML payload to the IDOC control record (File->XI->IDOC scenario) no longer works if the mapping is done via XSLT. It works if the XI graphical mapper is used. The XSLT used is the same pre and post upgrade, but worked fine previously.
[ Apply Control Record Values from Payload is checked in the IDOC adapter comm channel. ]
Has anyone else experienced this? Am looking for any inspiration
Cheers
DuncanAre you sure the xslt file is still there?
Maybe some non-compliance was corrected in later SP and your XSLT was using that non-compliance.
If you post the XSLT we could try to point out any possible errors.
Regards,
Henrique. -
Current Condition Record value of JVCS not picking while GR posting
Dear All,
Tax Procedure being used is TAXINN
Scheduling Agreements are created before 01.06.2008.
Condition Record with validity periods for JVCS (A/P CST NonDed-VAT) is as follows,
01.04.2007 TO 31.05.2008 = 3%
01.06.2008 TO 31.12.9999 = 2%
If Goods Receipt is created with Posting Date after 01.06.2008, it is considering the old value i.e. 3%, whereas it should consider current valid value i.e. 2%.
After posting GR, Inventory and Purchase G/L Accounts are getting posted with 3% value.
Difference of 1% getting reverted back in those G/L Accounts after posting Invoice for the GR document.
Can you guide me to let system consider Condition Record value 2% as per GR posting date and Validity Period of Condition Record.
NOTE: For PO/SA created on/after 01.06.2008, it is considering current value i.e.2%.
Thanks & Regards,
Nilesh Mahajanhi ,
system is considering the scheduling aggrement creation date for condition record.
change the date.
and run the scenario
regards,
sujit -
Pricing - Condition record value is differ from condfition value in billing
Dea All,
While checking one billing document, PR00 amount is 30 EUR per 1 PC and condition value is 43 USD, if i select the PR00 line item and goto condition records, iam finding the condition record value is 34 EUR per 1 PC...
I Dont no whta is happending here... Can you please put some light on this..
Thanks in advance..
Regards
Ramakrishna.P1: Check PR00 in VK13 , if there are any scales maintained.
Else
2: Check PR00 in VK13, and go to Environment changes and check if the price is changed recently or any changes are made which you are not aware of. Also please check the condition type definition of PR00 using T Code V/06 and check how the pricing date is being mainatined.
Hope this helps
Sai -
How to edit the records value fetched by select statement query in sqldever
How to edit the records value fetched by select statement query in sqldever 2.1.1.
EX-
SELECT * FROM emp WHERE ename like 'Jaga%'
Edited by: user9372056 on Aug 31, 2010 2:16 AMHi,
Although some forum members may be using that tool, there is still a dedicated forum for SQL Developer.
SQL Developer
Maybe your chances are better there.
Regards
Peter
Maybe you are looking for
-
CUPS CUPC Desk Phone control & features
Hi, We are doing the POC with CUCM , CUPS , OCS RCC integration. I want to clarify some of the features using Desk phone control. CUCM - 7.1.2 CUPS -8.0.0 , CUPS 7.0 OCS R2 CUCM CUPS are integrated and features soft phone , desk phone , IM , IPPM ,
-
How big can a word document be before Pages (iPad1) crashes?
I have an iPad1 and was thinking of using it for some quick edits. Since my MacBook struggles a bit with some of my larger word documents, I wondered how the iPad would fare. I don't want to waste the $10 on Pages if it isn't going to work for me. My
-
Hi, does anyone have any experience/suggestions for extracting the condition types from table KONV for reporting with the shipment costs? It looks like there is no business content for this. Thanks, Patrick BW 3.1 patch 9
-
Move iPhoto Library to external harddrive
Good evening all... I've done some searching and see a few different possibilites for using an Alternate iPhoto Library on an external harddrive. I'm hoping for opinions on the best option for what I wish to accomplish. In my line of photography, I t
-
I have Eclipse 3.3.1.1 and Flex SDK 2.0.1 How do I import the SDK into Eclipse? Instructions are vague.