Record missing while insertion

Hi,
Through my jsp coding i am checking nearly 15 conditions in loop. Each and every loop execution will insert a record on any of the 15 condition, this is going smooth but sometimes it is missing some records to insert. what and why its happening.
I am using Ms-Sql server 2000. i am using Stored procedure to insert the record.
Please advice to make this to work efficiently.

Yes, I have all the 15 conditions belongs to a single transaction and all these conditions will be in a jsp file.

Similar Messages

Records missing while extracting 0account hierarchy

Bi experts,
Two records have been added by the business to a node in the 0account hierarchy , which can be seen in transaction /nKAH3.
While extracting the MAE 0account hierarchy using a full InfoPackage no errors occur, but when checking the hierarchy in BW both records are missing. The activate checkbox has been selected in the InfoPackage.
Has anyone experienced something simular in the past?
Regards,

Hi,
If once you loaded the Hierarchy, then do the Change run for it.
If the loading was done manually then go to
RSA1 --> Tools --> Apply Hierarchy/Attribute Change Run -- > Click on Hierarchy List Puch Button
Then select the your hierarchy loading and click on save and then click on Execute Hierarchy/Attribute Change Run.
Hope this will solve your problem
With Regards
ARUN
Edited by: Arun Aravapalli on Mar 16, 2010 11:59 PM

Some records missing while full repair from datasource 2LIS_11_VAITM

hi friends,
we are using the datasource 2LIS_11_VAITM. If we run a full repair with a selection ., say for a particular dealer, some document numbers are missing. even if we run a full repair without any selection, same thing happens.
we couldnt able to spot out where the records are getting filtered. is there any way to check the datasource for any filterations.
can anyone tell from which tables the data is flowing to this datasource.

Hi.
fill the set up table first for the application 11 for the selections which you want to get pulled in BW.
A full repair load for a LO data source is pulled from a set up tables and a full repair will pull whatever is in set up tables.
So fill the set up table for the values which you want to be pulled into BW first.
I think right now your set up tables do not contain those records which you want in BW.
Then verify in the t-code RSA3 for the selection and see if you are able to see those records there.
if its showing up in RSA3 then schedule a full repair and it will show up in BW then.
The major underlying table are VBAP,VBAK.you can verify the values from there.
Do not forget do delete the set up tables before filling it.
Thanks
Ajeet

Commit each record while insert

Hi All,
I am using ESB for my project.
I have a requirement that I select multiple records from a database using a select operation, which need to be inserted into a local DB.
Need is to commit each record as it writes into the local DB.
becoz, assuming that I may select around 500 records from the souce, and while inserting,the 375th record fails, I would not want to roll back the other 374 records that are inserted, and also miss on the other remaining 125!
Please advice how this can be done. Thanks in anticipation. Urgent need!
Regards,
Sambhav.

The DBAdapter does this in single commit, so that a rollback can take place in case of failure.
You will need to use compensate activity if at all you want to commit mid way.
Is there any particular reason that you are looking to commit them in shorter batches?
Every Little Helps
Kalidass Mookkaiah
MyBlog

Problem while inserting a record to infotype 416

Iam facing a problem while inserting a record to the infotype 416 for a personnel no using the FM 'HR_INFOTYPE_OPERATION'.I have created a FM to insert a record to the infotype 416.In that FM iam using the FM 'HR_INFOTYPE_OPERATION' to create a record for infotype 416.while executing my FM the FM 'HR_INFOTYPE_OPERATION' is returning the return value 0.But when i check in PA30 for the infotype 416,there is no record created for that personnel no.Also in the table PA0416 the record is not get created.SO what might be the problem.can anyone please provide me help on this.
I have attached the code of my FM for ur reference.
FUNCTION Y_ESS_FL_ENCASH.
DATA: G_COMPENSATION_AMOUNT LIKE PA0416-AMONT,
      G_RETURN TYPE BAPIRETURN1.
DATA T_PA0416 LIKE P0416 OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'HR_READ_INFOTYPE'
    EXPORTING
       TCLAS                 = 'A'
       PERNR                 = '00000014'
       INFTY                 = '0416'
     BEGDA                 = sy-datum
     ENDDA                 = sy-datum
       BYPASS_BUFFER         = 'X'
     LEGACY_MODE           = ' '
IMPORTING
     SUBRC                 =
      TABLES
        INFTY_TAB             = T_PA0416
EXCEPTIONS
INFTY_NOT_FOUND       = 1
OTHERS                = 2
    LOOP AT T_PA0416
    WHERE SUBTY = '1002'.
    ENDLOOP.
    IF SY-SUBRC <> 0.
      CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
        EXPORTING
           NUMBER = '00000014'
        IMPORTING
           RETURN = G_RETURN.
      IF SY-SUBRC <> 0.
         MESSAGE I016(RP) WITH ' RECORD IS ALREADY LOCKED'.
      ENDIF.
      T_PA0416-PERNR = '00000014'.
      T_PA0416-SUBTY = '1002'.
      T_PA0416-INFTY = '0416'.
      T_PA0416-OBJPS = ''.
      T_PA0416-SPRPS = ''.
      T_PA0416-SEQNR = ''.
      T_PA0416-AEDTM = SY-DATUM.
      T_PA0416-UNAME = SY-UNAME.
      T_PA0416-ENDDA = SY-DATUM.
      T_PA0416-BEGDA = SY-DATUM.
      T_PA0416-NUMBR = '10'.
      T_PA0416-WGTYP = '1530'.
      T_PA0416-AMONT = '15000'.
      T_PA0416-WAERS = 'INR'.
      T_PA0416-QUONR = '1'.
      APPEND T_PA0416.
      CALL FUNCTION 'HR_INFOTYPE_OPERATION'
        EXPORTING
          INFTY                  = '0416'
          NUMBER                 = '00000014'
          SUBTYPE                = '1002'
OBJECTID               =
LOCKINDICATOR          =
         VALIDITYEND            = '31129999'
         VALIDITYBEGIN          = SY-DATUM
        RECORDNUMBER           = ''
          RECORD                 = T_PA0416
          OPERATION              = 'INS'
          TCLAS                  = 'A'
DIALOG_MODE            = '0'
        NOCOMMIT               = 'X'
VIEW_IDENTIFIER        =
SECONDARY_RECORD       =
        IMPORTING
          RETURN                 = G_RETURN.
KEY                    =
      IF G_RETURN+0(1) EQ 'E'.
              MESSAGE I086(ZHR) WITH 'Record is not inserted in IT416'.
      ELSE.
          COMMIT WORK.
      ENDIF.
      CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
        EXPORTING
          NUMBER = '00000014'
        IMPORTING
          RETURN = G_RETURN.
    ENDIF.
ENDFUNCTION.

Hi Murthy
With a first glance, I think you have given a wrong parameter value to "validityend". It should be '99991231' not '31129999' .
If your problem still persists, try inserting the data online from PA30. If your input causes no errors, then please state what the return parameter contains.
Regards
*--Serdar <a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=qbk%2bsag%2bjiw%3d">[ BC ]</a>

Error while inserting record in Key-Flex Values Set interface

Guys
on 11.5.10.2
Actually the problem is being occurred while inserting value in Job Flex Field Value set, we have created two segment for job key flex filed, No and name, it was working fine, but since we have uploaded bulk data via api "fnd_flex_values_pkg.INSERT_ROW" which was around 100 off record, but after completion this task system is not taking new value by Values set interface, and show message "APPS-FND-01206: You entered duplicate values or sequence of value that must be unique for every record",
However, we insert the job number through api, it is inserting without error while
Interface is not taking value and raise duplicate message error,
which is APPS-FND-01206
Please Advice.

Thanks for supporting dunacan
I have mentioned both of segment detail . please advice,
1.One is Job No segment
Segment1 number 10
Required Check Yes
Value set Info JOB_NO
List Type : List of Values
Security Type : No Security
Format Validation : select number 7,0 and check on number only (0-9)
Validation Type Independent
2.One is Job Name segment
Segment2 number 20
Required Check Yes
Value set Info JOB_NAME
List Type : List of Values
Security Type : No Security
Format Validation : select CHAR 60 Validation Type Independent
It was strange that how could it possible duplication value without having database,i am unable to find this issued,
Edited by: oracle0282 on Jan 17, 2011 3:32 AM

Some fields are missing while recording through shdb

Dear Abapers,
I am doing bdc for F-27 t.code.Some fields,cobl-gsber(business area),cobl-kostl(Cost center) are missing while recording through SHDB.But when do it manualy the fields are displaying.Also i have ddded those fields manualy in the program,stll the fields are not getting captured.May anyone pls help me,why this problem is happening?What is the solution for this.
Thanks in Advance.

hi
i can tell u that few transactions wont suffice us with BDC,so for such transactions we do bdc with similar kind of transactions.
ie., The transactions FB60 and f-63 both are meant for Parking.
But we cant do bdc for FB60 Parking. So we do bdc for f-63.
similarly when we do bdc for vendor few fields wont appear...in that case, we use bapi for it....
So try to find an appropriate bapi or similar tcode which will suffice ur need
hope its clear.
Regards
Sajid

First Row Record is not inserted from CSV file while bulk insert in sql server

Hi Everyone,
I have a csv file that needs to be inserted in sql server. The csv file will be format will be like below.
1,Mr,"x,y",4
2,Mr,"a,b",5
3,Ms,"v,b",6
While Bulk insert it coniders the 2nd column as two values (comma separte) and makes two entries .So i used filelterminator.xml.
Now, the fields are entered into the column correctly. But now the problem is, the first row of the csv file is not reading in sql server. when i removed the terminator, i can get the all records. But i must use the above code terminator. If
am using means, am not getting the first row record.
Please suggests me some solution.
Thanks,
Selvam

Hi,
I have a csv file (comma(,) delimited) like this which is to be insert to sql server. The format of the file when open in notepad like below:
Id,FirstName,LastName,FullName,Gender
1,xx,yy,"xx,yy",M
2,zz,cc,"zz,cc",F
3,aa,vv,"aa,vv",F
The below is the bulk insert query which is used for insert above records,
EXEC(BULK INSERT EmployeeData FROM '''+@FilePath+'''WITH
(formatfile=''d:\FieldTerminator.xml'',
ROWTERMINATOR=''\n'',
FIRSTROW=2)'
Here, I have used format file for the "Fullname" which has comma(,) within the field. The format file is:
The problem is , it skip the first record (1,xx,yy,"xx,yy",M) when i use the format file. When i remove the format file from the query, it takes all the records but the "fullName" field makes the problem because of comma(,) within the
field. So i must use the format file to handle this. So please suggest me , why the first record skipped always when i use the above format file.
If i give the "FirstRow=1" in bulk insert, it shows the "String or binary data would be truncated.
The statement has been terminated." error. I have checked the datatype length.
Please update me the solution.
Regards,
Selvam. M

Avoiding duplicate records while inserting into the table

Hi
I tried the following insert statement , where i want to avoid the duplicate records while inserting itself
but giving me the errror like invalid identifier, though the column exists in the table
Please let me know Where i'm doing the mistake.
INSERT INTO t_map tm(sn_id,o_id,txt,typ,sn_time)
   SELECT 100,
          sk.obj_id,
          sk.key_txt,
          sk.obj_typ,
          sysdate,
          FROM S_KEY sk
    WHERE     sk.obj_typ = 'AY'
          AND SYSDATE BETWEEN sk.start_date AND sk.end_date
          AND sk.obj_id IN (100170,1001054)
           and   not exists (select 1
                                                               FROM t_map tm1 where tm1.O_ID=tm.o_id
                                                                    and tm1.sn_id=tm.sn_id
                                                                    and tm1.txt=tm.txt
                                                                    and tm1.typ=tm.typ
                                                                    and tm1.sn_time=tm.sn_time )

Then
you have to join the table with alias tml where is that ?do you want like this?
INSERT INTO t_map tm(sn_id,o_id,txt,typ,sn_time)
   SELECT 100,
          sk.obj_id,
          sk.key_txt,
          sk.obj_typ,
          sysdate,
          FROM S_KEY sk
    WHERE     sk.obj_typ = 'AY'
          AND SYSDATE BETWEEN sk.start_date AND sk.end_date
          AND sk.obj_id IN (100170,1001054)
           and   not exists (select 1
                                                               FROM t_map tm where sk.obj_ID=tm.o_id
                                                                    and 100=tm.sn_id
                                                                    and sk.key_txt=tm.txt
                                                                    and sk.obj_typ=tm.typ
                                                                    and sysdate=tm.sn_time )

Few records are missing while downloading to a Spreadsheet from a Report

Dear Gurus,
few records are missing while downloading to a Spread sheet from a Z report. There are around 300 records, out of which 11 records are not appearing in Spreadsheet file after saving. But, the funny thing is when i try to save in other format like, HTML or to a clip board all records are coming.
When asked, the ABAPer said -
your report is coming correctly. if the report is wrong then we can try checking some code in the Z report. Saving it into Spread sheet is the standard program provided by SAP.
He is also facing this problem for the first time.
Can anybody help.
Thanks in advance and u will get points if useful.
Regards

Hi,
Few days back we got this kind of error, when i tried to down load the asset balances in excel format.
It was observed that, for one of the asset description ends with cama",". Due to this reason all other details has been stored in single cell. Once we changed the master data of that asset, then we able to get the report properly.
2) Some other time, when we tried to download material master details, for one of the material ... description not maintained. this is another issue. After maintain the description problem got resolved.
Hope this information will be helpful to u.

How can we avoid duplication of records in database while inserting records

Hi,
In my scenerio,while inserting the same records through idoc duplication of records is happening in database.How can i avoid this.

Divya,
First its a wrong data, because you cannot have the same data for any condition. Probably its a data problem. Please check with the datbase team and ask them why is it so? They should handle on their end.
Anyways if the above dont work and if you ahve duplicate records then probably you need to come up with a query using select distinct. If this doesnot work then if the duplicates comes into mapping, you might selecting some fields which are common. So you can use a splitbyvalue(on value change) for those records, so even if there are three records it takes only one record. If you have 4 or 5 common values then you can concat them and then use the splitbyvalue change.
Else an adapter module should help you out in sender comm. channel after picking the records.
For an idea can you rajs response in this thread:
Duplicate records
Regards,
---Satish

Row Level Locking while inserting a record.

It is a good practice to lock the whole table or do the row level locking while performing any DELETE / UPDATE / MODIFY actions on a database table. Is it necessary to do the same thing while inserting a record via INSERT statement?
One point may arise if two users are inserting same records at a same time....
Well i am little bit confused here bcos if a record doen't exist in a table what is the point of locking it.
Please help me.

create a lock object using SE11 for that perticular table and include field names in Lock parameters. Then it will generate two FMs one for locking and another for unlocking.
Call the lock FM before updating the table and pass that row key value(For fields which taken in lock parameters for creating lock objects) to the exporting parameters.
Then do the updation.
Reward if useful...................

Material control record missing in company code while doing migo OMSY maintained

Hi All,
for a new company code when i try to do GR using Migo getting error "Material control record missing in company code" i have maintained the OMSY periods for company.i see other answers for same question suggesting maintain OMSY recored for company code.i am getting the error even entry exist ,any help greatly appriciated,
Thanks,

Check in OMS2 whether you maintained the quantity and value update settings for your plant

Commit each record while insert using DB adapter

Hi,
I am working on an ESB process, wherein i use the DB adapter to insert multiple records into a table.
The ave count of records could easily be more that 50.
Appears, the default behaviour of the adapter is to commit only once after all records have been inserted. However, need is to commit each row as i insert it. Will help even if i can commit in batches of say, 10.
Please advice how this may be done.
Regards,
Sambhav.

The DBAdapter does this in single commit, so that a rollback can take place in case of failure.
You will need to use compensate activity if at all you want to commit mid way.
Is there any particular reason that you are looking to commit them in shorter batches?
Every Little Helps
Kalidass Mookkaiah
MyBlog

ERROR WHILE INSERTING BLOBS AS PARAMETERS OF EXISTING STORED PROCEDURE

I have 2 simple tables to keep large application data (as XMLDOCUMENT in one table and BLOB in another):
SQL> desc bindata_tbl;
Name Null? Type
BDATA_ID NOT NULL NUMBER(10)
BDATA NOT NULL BLOB
SQL> desc metadata_tbl;
Name Null? Type
MDATA_ID NOT NULL NUMBER(10)
MDATA NOT NULL SYS.XMLTYPE
and stored preocedure to input new data into those tables:
"SP_TEST_BIN_META_DATA"
i_MetaData in METADATA_TBL.MDATA%TYPE,
i_BinData in BINDATA_TBL.BDATA%TYPE
as
begin
if i_MetaData is not null then
insert into METADATA_TBL (MDATA_ID, MDATA)
values (METADATA_SEQ.nextval, i_MetaData);
end if;
if i_BinData is not null then
insert into BINDATA_TBL (BDATA_ID, BDATA)
values (BINDATA_SEQ.nextval, i_BinData);
end if;
COMMIT;
-- Handle exceptions
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
RAISE;
end;
I communicate with database from .Net application using "Oracle.DataAccess 10.1.0.200 (Runtime version v1.0.3705)" component.
Following procesure is a [simplified] examlple of the code I use, which demonstrates the errors while inserting XMLDOCUMENT and BLOB values simultaneously.
In my application those should be quite big objects (~200 K XML and ~5-25M binary image data), but following sample keeps failing even with very small-sized objects:
Line Number
1          private void PureTest()
2          {
3               OracleConnection conn = null;
4               OracleTransaction tx = null;
5               OracleCommand command = null;
6
7               try
8               {
9                    // Open connection
10                    string strConn = "Data Source=AthenaWf; User ID=AthenaWf; Password=Poseidon";
11                    conn = new OracleConnection( strConn );
12                    conn.Open();
13
14                    // Begin transaction (not sure if really needed)
15                    tx = conn.BeginTransaction();
16
17                    // Create command
18                    string strSql = "SP_TEST_BIN_META_DATA";
19                    command = new OracleCommand();
20                    command.Connection = conn;
21                    command.CommandText = strSql;
22                    command.CommandType = CommandType.StoredProcedure;
23
24                    // Create parameters
25                    // 1) XmlType parameter
26                    string strXml = "<?xml version=\"1.0\"?><configuration testValue=\"123456789\"/>";
27                    XmlDocument xmlDoc = new XmlDocument();
28                    xmlDoc.LoadXml( strXml );
29                    OracleXmlType oraXml = new OracleXmlType( conn, xmlDoc );
30                    //oraXml = null;
31                    //
32                    OracleParameter xmlPrm = new OracleParameter();
33                    xmlPrm.ParameterName = "i_MetaData";
34                    xmlPrm.Direction = ParameterDirection.Input;
35                    xmlPrm.OracleDbType = OracleDbType.XmlType;
36                    xmlPrm.Value = oraXml;
37                    command.Parameters.Add( xmlPrm );
38
39                    // 2) Blob type
40                    byte[] buf = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9};
41                    OracleBlob oraBlob = new OracleBlob( conn, true );
42                    //oraBlob.Write( buf, 0, buf.Length );
43                    oraBlob = null;
44                    //
45                    OracleParameter blobPrm = new OracleParameter();
46                    blobPrm.ParameterName = "i_BinData";
47                    blobPrm.Direction = ParameterDirection.Input;
48                    blobPrm.OracleDbType = OracleDbType.Blob;
49                    blobPrm.Value = oraBlob;
50                    command.Parameters.Add( blobPrm );
51
52
53                    // Execute command finally
54                    command.ExecuteNonQuery();
55                    tx.Commit();
56               }
57               catch( Exception ex )
58               {
59                    // Clean-up
60                    if( command != null )
61                    {
62                         command.Dispose();
63                    }
64                    if( tx != null )
65                    {
66                         tx.Dispose();
67                    }
68                    if( conn != null )
69                    {
70                         conn.Dispose();
71                    }
72
73                    // Display error message
74                    MessageBox.Show( ex.Message, "Error" );
75               }
76          }
If I try insert only XMLDOCUMENT object (lines 30, 42 are commented out, 43 IS NOT) - everything is OK.
If I try to insert only BLOB object (lines 30, 42 are NOT COMMENTED OUT, line 43 is commented out) - everything is OK again.
If I try to insert them both having some values (lines 30, 43 are commented out, 42 is not commented out) - it fails right on "command.ExecuteNonQuery();" (line 54)
with the following exception:
"ORA-21500: internal error code, arguments: [%s], [%s], [%s], [%s], [%s], [%s], [%s], [%]".
Even when I nullify oraBlob before assigning it to OracleParameter value (line 30 is commented out, line 42 and 43 are not) I have the same exception.
XMLDOCUMENT and DLOB data logically are very coupled objects (in my application), so I really want to insert them simultaneously in one stored procedure in transactional way.
Is it bug of drivers, server, .net environment, or I miss something in implementation?
PS. In some articles on Oracle web and in MSDN site I found a mention about necessity of wrapping all write/update operations in a transaction, while working with temporary LOBs. I use it here, but it does not look like changing anything.

Hello,
I tested your code with the 10.1.0.4.0 ODP and 10.1.0.4.0 Client and it worked fine.
Can you please apply the 10.1.0.4.0 patches for both ODP and client to see if this resolves the issue for you.
Here is the output from the same execution of the ODP application you provided as a testcase. These rows were inserted at the same time when I executed the application and passed the data as parameters to the SP you provided.
Results of Testing with 10.1.0.4.0
==========================
SQL> select count(*) from BINDATA_TBL
2 ;
COUNT(*)
1
SQL> select count(*) from METADATA_TBL;
COUNT(*)
1
SQL> select dbms_lob.getlength(bdata) from BINDATA_TBL;
DBMS_LOB.GETLENGTH(BDATA)
10
SQL> select mdata from METADATA_TBL;
MDATA
<?xml version="1.0"?><configuration testValue="123456789" />

Record missing while insertion

Similar Messages

Maybe you are looking for