Material control record missing in company code while doing migo OMSY maintained

Hi All,
          for a new company code when i try to do GR using Migo getting error "Material control record missing in company code" i have maintained the OMSY periods for company.i see other answers for same question suggesting maintain OMSY recored for company code.i am getting the error even entry exist ,any help greatly appriciated,
Thanks,

Check in OMS2  whether you maintained the quantity and value update settings for your plant

Similar Messages

  • Error while doing MIGO for a sub-contracted item

    Hello to Everybody,
    I am facing below problem -
    Error : Incorrect CCtr <Cost Center Code> with this account (CCtr category must=D) for
    <Item Code> , while doing MIGO. (for receiving sub-contracted item from vendor).
    May I request for possible solution to above error ?
    regards,

    Dear Sanjay,
    You can determine the cost object for the posting of the  costs in the transaction OKB9.
    Following thread should resolve this issue:
    Re: cost of subcontracting
    Regards,
    Naveen.

  • MATERIAL CONTROL RECORD

    HI
    While doing tran MIGO system is giving following message
    " material control record is missing in company code".
    pls help me.
    bhaskar

    Hi Bhaskar,
            Kindly check the entries in SPRO-Logistics general,Material master-Basic Settings-Maintain Company code for Material Management.
    Here for the copany code in which you are getting the Error try to enter
    1.Current year,current month
    2.Current year,Previous month
    3Previous year,Last month of the previous year.
      Please reward the points if it is a helful answer.
    Regards
    Sunil Kumar

  • Changing controlling area from single company code to cross company code

    Hi,
    Due to my client requirement, in the middle of the year, we need to change the controlling area from being same as company code to cross company code controlling area. Although the currency is same. We are going to create a new company code. Is the changing controlling area settings possible to do? what are the precautions and changes need to be taken?
    One more question, we need to change the company code when the new company code is created in the system in Cost Center Masters in the middle of the year. Is this possible after changing controlling area from single company code to cross company code. Right now company code is not appearing in the cost center master.
    Thanks & Regards,
    Saidarao

    Hi,
          If both companies having transaction data its not possible,Normally before defining Organisational Strucutre only we have to deside both companies is assigning same controlling are or have to maitain separately for this we have to compare the Fiscal year,Operating chart of accounts ,if both having same then we will assign both the company codes to one controlling area if these two companies having different currencies also its not a problem.When we creating Controlling Area we have to choose option of controlling area as same company code (if one company code one controlling Area) for example if you assigning two companies then we have to use cross company code cost accounting.If u need any further information let me know.
    Regards,
    Satya

  • Transfer Customer Master records from one company code to another company.

    hi ,
        working on a rollout project ,
    needed to transfer Customer Master records from one company code to another company code.
    is there any sap standard BDC/T-code as in case of Vendor Master FK15,Fk16(T-CODE) .
    thanks in advance.
    rahul
    Edited by: RAHUL SINGH on Jul 22, 2009 9:05 AM

    Hi,
    I think you should ask this question in functional consultant forum.
    Thanks,

  • Dual control for vendors per Company code

    Hi,
    we are  going to setup dual control (sensitive fields) for master data of vendors (fk01, fk02).
    Is there a possibilty to use dual control only for certain company codes and not all?
    How can I restrict this - via workflow, user authorisation, user exit?
    Any idea or solution?
    Thanks in advance.
    Best regards,
    Yvonne

    Hi,
    thank you both for your fast replies.
    Dual control means we want to confirm critical vendor changes (t code fk08, fk09).
    That means if someone Create (fk01) or Change (fk02) Vendor data with sensitive fields, another person has to approve this changes in transaction fk08 or fk09.
    But this confirmation in fk08 and fk09 should not be necassary for all changes in fk01 or fk02, but only for some company codes.
    In this standard workaround in SAP all vendor changes need to be approved. How can I restrict this that only some company codes need to be confirmed in transaction fk08 and fk09.
    Thanks.
    Yvonne

  • Error " material is not assigned to company code" How do I

    Hi
    Guys I am getting the error
    " material is not assigned to company code" How do I solve it?
    Thanks
    samuel

    hi samuel,
    this error is due to the fact that you must have assigned the plant to this material and that plant is not assigned to your company code. or the other case may be the organisational levels whic you have maintained in which you enter your sales org. check if that sales org is assigned to your company code.
    in short chec all the assignments related to your enterprise structure.
    Regards,
    Archit

  • Can We Two Different Credit Control Area to 1 company code using cross comp

    Can We Two Different Credit Control Area to 1 company code using cross company code assignment.Tried but giving error at the time of bill release.Experts Can you help?

    Hi,
    It is not possible to have more than one credit  control are for a single company code.

  • Can we assign 2 credit control area for one company codes

    hi,
    sap gurus,
    can we assign 2 credit control areas to one company codes ?
    yes we can.
    but
    what is the impact of that
    can any one analyse.
    regards,
    balaji.t
    09990019711

    Hi,
    we can have multiple credit control areas based on req-
    eg: client wants to restrict customer based on divisoin wise.
    then we will maintain credit control area based on sales area
    there 3 division in a comp: AA -BB - CC
    thens sales areas will be:
    1000-10 -AA
    1000-10-BB
    1000-10-CC ( assuming therez one sales org-1000 & dc 10)
    now create 3 cr control areas- OB45
    Assign sales area to cr Control area - OVFL
    Assign permitted credit control areas to comp code - IMG- FA- AR&AP- Credit Management- Credit control account - Assign permitted credit control areas to comp code.
    Now you can assign this Cr CA- by sales area wise in CMR & maintain the credit limits for each Cr CA.
    So when ever your needs wants to do it by division or sales area wise you can do this.
    Thanks,
    Raja

  • Is it possible that we generate material requirement in MRP at company code level?

    We want to generate material requirement in MRP at company code level, what is the possibility or any work around.
    Thanx in Advance.

    Hi Mirza
    This is not possible on the standard system. The highest planning level on MRP is the plant.
    It has been discussed on the following thread, where BAdI MD_CHANGE_MRP_DATA was proposed as a solution, however, the logic to be implemented on this BAdI is very complex:
    MRP Run considering Stocks for Multiple Plants and Requirement maintained for Plant Cluster
    If you want to know more about the BAdIs available on MRP check the following document:
    BAdIs for MRP
    Another alternative is to use flexible planning to plant at company code level, then disaggregate the planning to the plants and transfer the result to demand management and MRP.
    See the following thread for details:
    Flexible planning | SCN
    BR
    Caetano

  • Cost Centre creat at Controlling Areal level or Company code level???

    Hi,
    I have a doubt,  
    1. Cost center is created at controlling area level or company code level.
    2. Is it possible to create at company code level.
    Please update me.
    We have company code field in cost center master.
    If we update this field, can we use same cost center for another company code also???
    Thanks
    Partha

    Hi Joshi,
    Thanks for your inputs.
    We create cost center in CO under controlling area. [In cost center master there is one filed company, its not mandatory.]
    Question is - If multiple company codes assigned to one Controlling Area, in this case -
      Is it possible to utilize same controlling are for multiple company codes.  
    You tell me if possible, how it is possible?
    Thanks
    Partha

  • Assignment of multiple credit control areas to single company code

    Hi Friends,
    Is it possible to assign multiple credit control areas to single company code?  If possible please explain
    me how it is possible. Any help will be highly appreciated.
    Thanks a lot in advance.

    Dear Ramesh,
    It is not possible to assign multiple credit control areas to the single company code but you can assign single credit control area to the multiple company codes.
    Relation bet ween company code and credit control area is
    Many  to One
    But not
    One  to Many
    I hope this will help you,
    Regards,
    Murali.

  • One controlling area  with two company codes assigned with one CoA

    Hi,
    I   am having one controlling area  with two company codes assigned , i am using the same  gl for two company codes  as cost element , when i am positng the  miro for vendor purpose  it posted the error  , to avoid the  price difference purpose , i have given  one cost center  of  first company code in OKB9 , and  overcome the error , entries posted, when i am posting new entry for MIRO   in secod  company codes with same cost  element ,  price difference of that account should go to the other cost center  which specifically created for second company code,  in the OBK9 i have given  cost center first company code   of the same GL  account , now this is another new entry in the second company code with other cost center in the second company code  since the price difference  account should sit in the other cost center of second company code,  how to  over come  this problem, pls help me
    Thanks and regards
    Murugesan

    Hi,
    First, remove the default cost center in the cost element. Then, for the system to derive the correct cost center for each company codes, define one cost center for each compny codes in OKB9 just like this:
    Co Code   Cost Element   Cost Center
    1000          1000000              A
    2000          1000000              B
    So during MIRO, the system will derive these values you maintain in OKB9.
    Regards,

  • "Company code  is not permitted as the paying company code while FRFT

    Hi Experts,
    I am trying to post cross company fund transfers via FRFT -> F111. In my scenario, CC1 is sending amount to CC2 via a virtual payment method. I have done basic company code set up and also customizations in FBZP for payment method and F8BJ/F8BF for incoming/outgoing transactions. I have also done OBYA setting for cross company clearing account
    During FRFT payment request i get this error: "Company code CC1 is not permitted as the paying company code".
    Did you ever experience this? If so, how can i fix this?
    Thanks in advance.

    Dear subumax
    1.Please check once again in both company codes for FBZP. were you maintained in All Company codes in FBZP - Select your company code and check- were you maintained Paying company code.
    2.Pleasecheck in under Paying Company codes - were you maintained the paying company code CC1 or not
    3Please check in under Payment methods in comapny code were you maintained your paying company code code CC1 details or not 
    Regards
    Shankar

  • The company code 123 does not exist or has not been fully maintained

    hi...
    frnds..
    Error: The company code 123 does not exist or has not been fully maintained..
    While creating material master, am getting this error... how to resolve this...
    Thanks in advance...
    Raghav.KH

    Hi,
    Check in OX02 whether the city, country, currency and language are maintained and in OX16 it is assigned to company.
    If your company code does not exist create new entries by giving an ID and description and fill the above particulars and
    assign to the company.
    Regards,
    Sadashivan

Maybe you are looking for

  • New ipod mini-will not connect to pc

    Got new ipod mini today, have uploaded software & plugged it into USB-it is charging fine, but PC will not recognise it as new hardware and it is not appearing in the itunes menu thing. We have a USB 2 card on the computer, and windows xp. The PC is

  • Can no longer open CS3 on new PC

    Hi all I have recently bought a new windows 7 computer, HP 1250ea it has a i7 processor and 6g memory. I then loaded PS CS3 which I have been using on my old XP PC for years and it would no longer open raw files. Both Bridge and PS give me the error

  • HT201364 wow - can't figure this out -

    I can't figure out how to tell what operating system I'm using and in the downloads it tells me to download OS X Mavericks and then it gives me a system error  Very frustrated

  • Where to book price diff between GR & IR of a text as material in PO

    Hi I got a question which I am searching for its answer. The amounts of a GR and IR were booked wrong so there is a difference between the total GRin and the total IR on the purchase order history of the PO. Since it is a text material, I am wonderin

  • Shake Floating licence Server?

    Hi Guys, I remember working at a company a few years ago (back in Shake 2.5 - 3.5) and the licencing was controlled by 'Shake Floating Licence Server" software that ran from the company's server The company had 4 licences that could be run at one tim