Recording and playing sound input from mic simultaneously in iphone/ipad

I want to simultaneously record and play the sound from a mic in iphone. As thecricket commentory application.
Please provide me a solution for this.
Is this possible in iOs.

This probably isn't going to sound very helpful, for which I apologise in advance, but I'm afraid it's the truth...
The only way you stand any way of doing any of this is by using ASIO4ALL, which can aggregate different drivers from multiple devices. But I don't rate your chances too highly, I'm afraid - USB mics have long been the problem child of computer-based audio. On top of that, you are trying to get sounds in and out of a separate device at the same time - not only that, but it's a Creative Labs gamer's device and they are second only to USB mics in terms of the 'difficult' stakes - search this forum!
A much, much better way to attempt to do this would be to use a sensible ASIO external device with sufficient inputs, and a mic that plugs into it, not a USB one. That way you could route the inputs and outputs appropriately, and use the device's monitoring so that you could monitor what you need to. I wouldn't attempt to do anything like this any other way, I'm afraid. Another approach (which can be made to work well) is to use an external mixer to do most of the work - often it's easier to set up the monitoring on these. You can get mixers with the appropriate interface built-in, and they don't cost a fortune either. Mackie and Behringer make suitable devices.

Similar Messages

Record and play sound in SWF

Hi List,
I have developed standalone applications wherby i want the
give the
user an option of recording voice and then replaying the
recorded
sound. No need to save a file. Just record and listen.
Is it possible to record and play sound in Flash swf-files
without the Flash Communication Server?
If not is there any third party component which can help me
solve this purpose?

No, don't think this is possible without Flash Media
(formerly Communication) Server.
Search these forums though. The question is asked pretty
often, so maybe someone has offered a different answer.
Cheers!

Recording and playing sound

I am having a problem with sound in my program, it takes information from a TargetDataLine, put's it in a temporary file, then takes it back out of the temporary file and plays it using a SourceDataLine. currently, it does not play back the sound source code will follow in my next two posts.
andrewjj20

the play method:
class Player implements Runnable {
public Player() {
public void run() {
try {
int bufferSize = (int)(format.getFrameSize()*rate*1);
byte[] bytes = new byte[(int)bufferSize/12];
lineOut.open(format,bufferSize);
stopS = false;
recording = false;
playing = true;
if (debug) {
print("playing");
status.setText("Playing");
lineOut.start();
while (!stopS) {
if (in.available() != 0) {
     if(lineOut.available() != 0) {
     in.read(bytes);
     lineOut.write(bytes, 0, bytes.length);
} else {
stopS = true;
     resetGUI();
lineOut.drain();
lineOut.stop();
lineOut.close();
lineOut = null;
stopS = false;
recording = false;
playing = false;
status.setText("Done");
if (debug) {
print("Done");
} catch (LineUnavailableException ex) {
error("I can't acces the nessesary audio functions now");
} catch (IOException ex) {
error("Error communicating with the file.\nABORT!!! ABORT!!! ABORT!!!");
}

How to import and play sound file from mxl link?

I need to load different sound files dependent on which link you previously clicked in my app, but cannot figure out how to call the link to the sound file from my mxl file:
<carRace>http://www.unisux.org/zik-car/lamborghini-diablo-gtr_standing-start.mp3</carRace>
Can someone tell me what I am doing wrong in this code?
<fx:Script>
   <![CDATA[
                                        private var req:URLRequest;
                                        private var context:SoundLoaderContext = new SoundLoaderContext(1000);
                                        private var bCall:Sound;
                                        private var bSong:Sound;
private function playSong():void
                                                  var urlSong:String = "{carRace}";
                                                  var request:URLRequest = new URLRequest(urlSong);
                                                  bSong = new Sound(request, context);
                                                  bSong.play();
]]>
</fx:Script>
because this code does work:
<fx:Script>
   <![CDATA[
private var req:URLRequest;
private var context:SoundLoaderContext = new SoundLoaderContext(1000);
private var bCall:Sound;
private var bSong:Sound;
private function playSong():void
var urlSong:String = "http://www.unisux.org/zik-car/lamborghini-diablo-gtr_standing-start.mp3";
                                                  var request:URLRequest = new URLRequest(urlSong);
                                                  bSong = new Sound(request, context);
                                                  bSong.play();
]]>
</fx:Script>

Visit: http://www.tools.de/solaris/
you will love sound/audio programming.... source available.

Real Time - Capture sound signal from Mic then store to memory.

Hi people,
I wish to do a real time program that capture the data (+the ADC discrete digitized sound data+) from mic then store the data in memory...
Then my program retrieve the data continuously from the memory (as long as there are captured data from mic)
But i have no idea how JAVA deal with real time program that use memory to store the captured data.
i do know that JAVA do have class INPUTSTREAM to deal the real time thing that fetch the byte of data to program. But still wish to get more reference from here (never use this class before).
Please advise how can i start from "signal" the mic to store the captured data to memory and my program able to retrieve the data from memory then work my algorithm on it.
Or can correct me how actually i should store the captured data... i should store the data in memory or store the data as a variable?
MANY MANY MANY MANY thanks!!! Very appreciate for the advise and i will give my attempt :-).

I m sorry..
I was intend to ask the correct way to store the digitized data from microphone.
As all my previous work were storing the keyboard input as an declared variable or store in local server database.
But this time i wish to store the captured and quantized sound data from mic and no idea where should i start from...
Please give me some advise please.
I dun wish to save what i captured as a .wav file then only process the .wav file data.
But wish to process the data that was captured at instant.
I m very appreciate for your advise here.

Uploaded my pictures from my iPhone to my MacBook- Some of the videos I made show that they imported and play sound, but no picture- are they gone?

I Uploaded my pictures from my iPhone to my MacBook… Some of the videos I made show that they imported and play sound, but no picture… are they gone?Becuase they offer to delete what was imported, so to save space i did... Is there anything I can do to restore the picture?

Do your videos play in QuickTime Playerwhen you reveal one of them in the Finder with "File > Reveal > Original"? Try to open the revealed movie in QuickTime and see if it plays.
Check the format of the movie. You can see it in the Inspector in QuickTime Player from the "WIndow" menu: Window > Show Inspector.
iPhoto does not support all movie formats and codecs that QuickTime player can play, and not all frame rates.
See: Using AVCHD video with iPhoto '11
If the movie does not play in QuickTime Player either, install QuickTime 7 for more codecs.

Does it exist a way to attach sound (and play them) directly from 3d ?

Hi all,
I want to know if there is a way to attach sound and play them directly from 3D, like image for background for insteance ?
see an example >>here<<

found :
doc level :
rm = getAnnotsRichMedia(this.pageNum)[0]; //sound
JS 3d level :
host.rm.activated=true;
host.rm.callAS("multimedia_play");

Please help me with recording and playing audio simultaneously!!!

Right now I can either play the incoming stream OR record it. I tried making Clones for datasource like :
DataSource clone1 = Manager.createCloneableDataSource(originalSource);
Then I pass it to these 2 classes:
new playThread(clone1).run;
new recordThread(clone1).run;
playThread is a Thread class that will take the cloned datasource and then plays it while recordThread will record the incoming datasource. Here is what happens when i run them one after another:
When I run playThread before recordThread I get ACM driver error. But if I run the recordThread before playThread the playThread's playerWindow shows up and plays for a split second then stops; The recordThread does record all the incoming stream though... Here are my questions....
1. Anyone know what my problem is? is it resource alocation? Threading problem?
2. Did I use the clone datasource correctly? I tried making clone1, clone2 but those didnt work well either...Should I do anything to the clones for record and play? all I did was pass them to the 2 classes and those classes just use them straight out without proccessing or anything...
Please help me out!!!! thanks a bunch!

i dont think it is... i tried the clone thing but samething happened... it might be a Thread problem since when i put those together sometimes record runs sometimes player runs... and at the end i get "ERROR while querying ACM driver's information" error..... i am really confused...
DataSource clone1 = Manager.createCloneableDataSource(originalSource);
DataSource clone2 = Manager.createCloneableDataSource(clone1);
playerThread play= new playerThread(clone1);
recordThread record= new recordThread(clone2);
record.start();
broad.start();
anyone can help is appreciated

Lost Mode and Play Sound are "Pending." However, iCloud indicates that it connected and backed up to iCloud at a date that is 1 week after it went missing. How is this possible without locking (Lost Mode Pending an internet connection)

Hi,
My wife lost her iPhone two weeks ago while on vacation in London (cell service inoperative in foreign country). Using Find My iPhone app on my device, I activated Lost Mode and Play Sound. However, both are listed as "Pending," since it those actions require the phone to connect to the internet (wifi only due to no cellular data coverage.).
We recently returned home and purchased a new iPhone.
However, when looking to restore the apps/settings from her old phone using a previous iCloud backup, iCloud indicates that the old phone connected to iCloud and backed up the original phone at a date that is 1 week after it went missing. How is this possible without locking (Lost Mode Pending an internet connection)?
If the phone was activated and connected to the internet via a wifi signal, shouldn't it immedately lock, show up on the map, Play Sound, and send me an email that the phone has been found?
I also read somewhere that if running iOS 7, the iCloud website interface enables you to track previous locations, for instance if the phone moves from wifi hotspot to hotspot. Is that true? If so, how do I do that?
Thank you for your time, and have a great day!
Sincerely,
- Matt

just giving this a wee bump as time is of the essence here and i need advice/ answers quick!
apologies if i've broke any rules!
alex

Recording and playing back

Hi, I have question about recording and playing back.
I am going to record by AudioQueue and to play back by MPMoviePlayerController.
My code can record by AudioQueue.
But, It can not record After playing back by MPMoviePlayerController.
Is Anyone who had same problem and solved it.
Please tell me resolution method.

Hi
Welcome to Apple Discussions.
We don't get very many questions about Core Audio here so if you don't get any response, you can try the Apple emailing list for Core Audio:
[email protected]
The list is very friendly and I'm sure someone there will be able to answer your question.
Bob

Is it possible to record and play at same time in swift, is there a option to record without storing the file

I am making a microphone, is it possible to record and play at same time in swift, is there a option to record without storing the file

Its pretty simple with FMS. You just need to do following things:
Publish using FMLE with following settings: (just telling which are needed , rest you configure based on your needs)
Video codec: H.264
Audio Codec: <of your choice>
Server ip: rtmp://<server-uri>/<app-name>
Stream Name: mp4:<stream-name>.f4v
Application : Server-side code
application.onPublish = function(myclient,mystream){
     mystream.record();
application.onUnpublish = function(myclient,mystream){
     mystream.record(false);
Have a client , which subscribes in following live mode:-
ns.play("mp4:<stream-name>.f4v",-1,0,true);   // this is subscribing in live mode
In this way even if file is recorded, your clients are subscribing in live mode so all will be in sync.
Now if you want to disallow any clients who will try to subscribe to "recorded" file when live event is going on, you can achieve using auth adaptor. (let me know if you want to enforce such requirement)
But i think above solution solves your primary problem. Also please let me know if there are any issues in getting it work , i have given bare minimum which is required.

HT204406 I have purchased match but when i try to play a song from the cloud on my ipad it displays a message of " cannot connect to iTunes Store" and doesn't play the song. i have reset both devices.

I have purchased match but when i try to play a song from the cloud on my ipad it displays a message of " cannot connect to iTunes Store" and doesn't play the song. i have rest both devices.

I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."

Recording and playing Audio at the same time

Hi,
Having problem with a MMAPI imp.
The simplest way of doing it is to start one thread playing a audio file of any kind.. As it is playing start a other thread that start a audio recording.
As soon as the audio recording is allowed to record (Security promt) the audio playback stops. And the playerListstner sends a END_OF_MEDIA event.
So my question is: Is there a way of doing playback and recording at the same time or is this a limit on the phone or the MMAPI?
This has been tested on Nokia N90 and SE W550i with same reults
Cheers
Kenth

i also desperately need to record and play audio at the same time.. i have a term project, i am develeoping a karaoke player in j2me and it is supposed to capture the voice at the same time background song is played.. and it is also supposed to grade the singer according to the pitch of voice.. please help me about recording and playing audio at the same time...

Recording and playing audio files

hi, is there a way by which one can record and play an audio file in java ?? I am doing a project in Voip but I can't find any help in this matter(actually i am a newbie in java ) .. can anyone please tell me how to proceed?
Edited by: streetfi8er on Jun 28, 2009 2:47 AM

>
hi, is there a way by which one can record and play an audio file in java ?? I am doing a project in Voip but I can't find any help in this matter(actually i am a newbie in java ) .. can anyone please tell me how to proceed?>You could not find anything on ['java audio'|http://lmgtfy.com/?q=java+audio]? Where did you look, underneath the bed and in the back yard?
Note that you might help dispel my impression that you are lazy, by applying the shift key once at the start of each sentence.

Sound input from networked computer

does anyone know of an easy way (or just a way) to use the sound input from another networked computer to mine into garageband?
thanks

Hi Christoph,
it doesn't seem to work like that (no unnecessary D-A-D conversion), as shown on page 6 of the documentation.
More information here, but I must admit that I'm no audio engineer so I don't fully understand how it works!
That said I don't remember having noticeable loss of quality in my audio streams when I tried it.
Dual 2.3GHz G5 3GB RAM Mac OS X (10.4.5) iBook G4 1GHz

Recording and playing sound input from mic simultaneously in iphone/ipad

Similar Messages

Maybe you are looking for