Recording Captivate 4 with WPF windows applications

Is anyone having issues recording captivate sessions using a WPF windows application. Specifically, I lose my ability to view data in any drop down control, although the data is there as I can retrieve it using the keypad. I have also had issues with the application locking after clicking on the drop down arrow. I have been assured by the development group that they have stuck to standard WPF controls, not any exotic third party controls. Any assistance would be greatly appreciated.

Hi there
Hmmm, this makes me wonder if WPF is what's used for presenting the Advanced Actions in Captivate. I say that because I personally had issues with capturing this area in Captivate.
One suggestion is to establish a remote desktop control from the PC with Captivate. You actually run the problematic application on a separate PC. You control it remotely from the PC where you have Captivate installed. Because it's simply a windowed application on the PC where Captivate is installed, you can usually overcome any incompatibilities between the application and Captivate.
Hopefully this helps... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Similar Messages

SMB Sharing with legacy Windows application

I have recently upgraded a client's Xserve to 10.5.x (just applied 10.5.3) from 10.4.11. The environment is Windows & Mac with approximately 70 users.
Without going into all of the problems I had with this upgrade, which ultimately became a re-format/clean install from scratch, I have one outstanding issue I have no clue with.
The Engineers in this company use a legacy windows app which is required for its specific functions. The Shares on the Leopard Server are mapped as drive letters and the workstation running the app have full access and using Windows Explorer can see all the file in the share, but the legacy app cannot.
So for example the E:/sharename/userdata/job/ contains many files. Using Windows Explorer all of these files are visible and have the correct perms, but when opening the app and using its Open Dialogue Window to point to the directory, all of the many folders within the share are visible and we can navigate within them, but the app does not see any files. It gives us 3 choices when viewing the files, *.dat, *.txt and ., but none of these show any of the files.
We also have a Windows 2003 Server which is the primary domain controller and runs Exchange 2003. If we copy the directories in question to a share on it or locally to the C: drive, then the app sees all of the files and can function normally.
Other current apps like Auto Cad and Microsoft Word and Excel function normally.
Any thoughts would be appreciated and I will provide any further information regarding the SMB setup if required.
This by-the-way worked fine when the server was running 10.4.11
I hope someone can shed some light on this.

Is the legacey application's development under your control or is a canned app?
How legacey? are we talking Windows 1.0, 286, 386, WorkGroups, 95, 98, Me, NT 3.0, NT-4, NT-2000, XP?
Do you have your heart set on Screen-scraping? or would you like to throw it out for other suggestions? (maybe screen-scraping is the only answer)
Any way, would you care to elaborate a little more on what you're doing? (yes, I am one of the more curious sorts).
Java Robot in 1.3 and later will do a limited amount of what you want, but you'll definetely need something else for full screen scraping.

I want to integrate captivate quiz with my flex application.

I am new to flex. I want to integrate flex application with captivate quiz. I could not find good documentation for this. Can any one please give me some url to find good documentation or some example. Thank you

I'm interested in using FLEX to create a widget that I load INTO a Captivate project. How would that change this approach?
Also, I've attempted to build a Flex 4 project (sdk 4.1) with this code, and it's generating the following errors:
Description
Resource
Path
Location
Type
1119: Access of possibly undefined property testing through a reference with static type flash.display:DisplayObject
Cp5Widget.mxml
/Cp5Widget2/src
line 26
Flex Problem
1120: Access of undefined property ldr
Cp5Widget.mxml
/Cp5Widget2/src
line 20
Flex Problem
1120: Access of undefined property ldr
Cp5Widget.mxml
/Cp5Widget2/src
line 21
Flex Problem
1120: Access of undefined property loadedSWF
Cp5Widget.mxml
/Cp5Widget2/src
line 20
Flex Problem
I've created the var_text.swf by creating a CP5 project that has the variable with a pre-defined value, and a button to set a new value.
Unfortunately, the project doesn't appear to load due to the errors present.
If you could find time to post a couple sample files, it may help us beginners!

How do Map files work with a Windows application?

I need confirmation on how map files work.
I have created a map file previously and have updated the HTML help with a few new topics and changed the Title on a handfull of topics.
The map file setup is done for the new topics, but I am thinking I need to "fix" those topics whose title has changed.
I have opened the Map.h file I created and looked at the references, for simplicity sake lets say it looks like this:
#define Dials_Setup 1
#define Project_Setup 2
#define Scenario Scenario_Setup 54
I assume the mapping process goes like this:
(1) I hand off map file and the CHM help file
(2) Developer addes the ID of "2" to the Project Setup window form
(3) When the user is on the Project Setup window, they press F1
(4) The Project Setup window form gets the ID of "2"
(5) The Map.h file translates the "2" to "Project_Setup" topic title
(6) The CHM is opened to the topic with a title of "Project_Setup"
So, if I changed the title of the topic from "Project_Setup" to "Project_Setup_Window" would I have to update the line item in the Map.h file from "Project_Setup" to "Project_Setup_Window" for the mapping to work and the client to see the correct topic when the press F1?
I am thinking these all need to be in sync between the Map.h file and the CHM file.
As always, thanks for any guidance.
Michael F Weart

Hi, Michael
You have it right - basically. I'll just add a few notes.
Yes. Typically you would give the .h and the .chm file to the developer. However, sometimes the developer will give you a .h file created from their IDE tool (e.g., Visual Studio). In that case, you would Import the .h file into your RoboHelp project and map it that way. Or it can be a combination as long as there are no duplicates of Map #s or Context IDs. Another tip: You can also generate a Map File Report (Tools > Reports > Map IDs) which can be a handy guide for the developer.
Note: The alphanumeric string for the Context ID (sometimes also called a Topic ID) does not necessarily have to be formed from the Topic Title. The reason it may seem that way is because RoboHelp uses the Topic Title as a matter of convenience to help you keep track of the which topic is being mapped. The main thing is that there are no duplicates and RoboHelp has a report for that as well. In Microsoft HTML Help (.chm), the actual mapping from the .h Map # to the URL of the actual topic can be found in the .ali (alias) file which can be found in your Project root. The .ali file is compiled into the .chm itself.
Here is a good Online Help topic with more details:
http://help.adobe.com/en_US/robohelp/robohtml/WS5b3ccc516d4fbf351e63e3d11aff59c571-7ff9.ht ml
Rob Chandler has really good documentation for Microsoft HTML Help which you will find here:
http://helpware.net/htmlhelp/how_to_context.htm
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com

HT3986 I have a Macbook Pro, have recently upgraded to OS 7, have installed the bootcamp option, and am not getting any sound with using windows applications.

I am getting no sound with I use windows programs on my Macbook Pro. I am operating with the bootcamp option. The sound works fine with I am running the MAC OS 7
I read that my problem could be a driver, but I am unsure how to get this driver and how to install it.

Read the Boot Camp installation guide http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf. You download the drivers during the installation process. Then you install the downloaded drivers after booting into Windows. You can also go to the source to get the sound drivers for your comuter. Search this forum and you will find posts with the url from which to download the drivers.

Best Practice for Showing Videos in a Windows Application

I am building a windows 8 application that has multiple articles. Each article will have anywhere from 0-3 videos associated with it. I was wondering where I could find some guidelines, best practices or examples about the how best to do this
from a design stand point, so that app is in line with the Windows Application guidelines.
Any help would be appreciated!
Thanks!

Hi bcp1978,
>>I was wondering where I could find some guidelines, best practices or examples about the how best to do this from a design stand point, so that app is in line with the Windows Application guidelines
To design a windows app, we need to understand Microsoft design principles first:
https://msdn.microsoft.com/library/windows/apps/hh781237.aspx Use these principles as you plan your app, and let them guide your design and development choices
Microsoft also provide a page of design guideline:
https://dev.windows.com/en-us/design
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to call Java methods from a Windows application?

Hello all,
At our company, we need to integrate our product which is a Java Swing application with a Windows application. Specifically, we are trying to call Java methods that reside in our application from the Lotus Notes email client application, which is a native Windows application. Such that when a user clicks a button in the Lotus Notes email client, it will trigger an event in our Swing application. Is this possible using JNI? Do you know of any resources or references relating to this kind of a project?
Thanks,
Mete Kural

If there is some dll interface that lets Lotus Notes load up and use a DLL, then yes, this should be possible.

Can captivate work with windows application automate tools

Hi,
I am assigned a task to create demos of some web
applications, I do not want to run the application then click and
input manually and am willing to use some windows automate tools to
record my action first, then capture the screen while doing
automation playback.
I've recorded some actions with rational robot, but the
playback is freezed while Captivate is recording. If I stop
Captivate recording, the automation continues flawlessly.
So my question is whether captivate can work with windows
automation tools, if rational robot is not the choice, can anyone
give me some suggestions?
Thanks very much!

Hi, Larry,
Rational robot is a general-purpose test automation tool (
http://www.ibm.com/software/awdtools/tester/robot/index.html).
It can be used to record user input (mouse clicks, keystrokes,
etc.) and automatically plays back scripts that emulate user
actions interacting with the GUI of applications under test.
There are many other applications doing the same work,
including this one which is written by myself :-) (
http://swat.sourceforge.net).
Using Captivate with automation tools is an ideal way to
create application demos because the automation scripts can be
easily created. stored and edited. Once I created an automation
script, It can be played as many times as I want.
My purpose is to create demos in the following steps:
1) record user actions interacting with the GUI by an
automation tool;
2) edit automation scripts manually to modify something (ie.
time interval between some actions)
3) start captivate recording;
4) use the automation tool to play back automation scripts
and record the screen by Captivate
5) edit the demo with Captivate
6) finish
But it seems that Captivate is incompatible with all of the
automation tools I've tested (not only Captivate, Turbodemo,
TechSmith Camtasia Studio are also incompatible). The automation
playback is freezed while Captivate is recording. If I stop
Captivate recording, the playback continues flawlessly.
I guess it's something related to windows events processing.
As you can figure out, the automation tools need to capture all the
windows events generated by target applications, it looks like
Captivate also captures some windows events of the target
application and it prevents automation tools from receiving those
events, so the automation playback is freezed.
Thanks for you reply and I am looking forward for soon
hearing from you.

Apex mixes applications working with two windows at the same time

Hi all, while developing in Apex I have found the following problem:
Working with two different applications at the same time, the browser goes from one to another indistinctly.
To reproduce the problem:
1. Open the same application builder in two different Firefox windows
2. Open a different application in each window (In my case: application 103 in window1 and application 105 in window2)
3. Go to shared components in both windows (window1 first)
- window1 breadcrumbs show: Home > Application Builder > Application 103 > Shared Components
- window2 breadcrumbs show: Home > Application Builder > Application 105 > Shared Components
4. Click in any shared component in window1 (Templates, Authentication Schemes...)
- window1 breadcrumbs show: Home > Application Builder > Application *105* > Shared Components > Templates (Application 105 instead of 103)
Is it a bug? I have read the known issues [[Here]|http://www.oracle.com/technetwork/developer-tools/apex/downloads/apex402knownissues-189793.html] but it does not appear.
Related Data:
Application Express version 4.0.2.00.07
Firefox 3.6.15
SO: Windows XP
The error is not reproduced with IE7. I have not tested any other browser.
Regards,
Molina

If you tried opening up two pages in the same application each of which modifies the same page items, you would notice the same issue.
This is because, in a session there is only one set of values for page items(or application items) and every parallel call to the same page would update the same bind variables.
Now the development environment or Apex Builder is also an apex application , and when try and open up the pages as you mentioned, they both access the same Application Builder page and sets/resets any existing values for those variables(and maybe cookies too if they are being used) , hence the 'mixing up'.
If that didn't convince you, check the URL of both the pages when you load them, they should show the same page number ( f?p=APP_ID:PAGE_NUMBER syntax). Imagine if the same approach was done with one of your application pages, say an edit form opened from a report with multiple records in multiple tabs like what happened with this case: {message:id=9346663}
So this really isn't a bug in a way, because that is how session states in apex is/was maintained. Ofcourse if they used another kind of development platform for building pages, it may have been avoided, but thats an altogether different point in itself.

Captivate 5.5 for mac crashing when recording a project - with OS X 10.10.1

Hi folks...
I have just upgraded my iMac to Yosemite 10.10.1 and have reinstalled Captivate 5.5. I haven't used it too much in the past but I know that pre Yosemite it was at least working... I am trying to learn how to use it for my job, but I keep opening it up, start to try and record a simple project (Software simulation - application), and is soon as I begin to perform actions, a 'Fatal Error' occurs and it tells me it will try to save my project and is about to close Captivate down...
I cannot get past this happening... Is there an issue with 5.5 and Yosemite ????? Have I not got something installed that I should have...
Any advice would be very helpful...
Thx in advance folks...

OK, so it appears I have found this out myself now... Captivate 5.5 is not supported in Yosemite. It is only supported till 10.8 Mac OSX... Only Captivate 7 and Captivate 8 is supported on Yosemite

Installing windows application with crystal reports runtime on 64 bit

I have a windows application created on 32 bit windows xp platform using visual studio 2005 with oracle 10g as database and crystal reports XI as reporting tool. The platform on which the application was created has Oracle 10g 32 bit Client, Crystal Reports Developer XI R2 and Crystal Reports XI Server Client. The application has to be installed on 64 bit Windows 7 machine. The application fails with following error
An error has occured while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient or Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist.msi) containing correct version of Crystal Reports runtime (x86, x64, or Itanium) is required. Please go to http://www.businessobjects.com/support for more information.*

We have an Windows Forms apps developed in VB.NET 2005 using Reports Documents from Crystal Reports XI R2 Server. The application is running fine on 32 bit Windows XP machine. We are trying to install the application on 64 bit Win 7 machine. We are getting following error while doing so
An error has occured while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient or Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist.msi) containing correct version of Crystal Reports runtime (x86, x64, or Itanium) is required. Please go to http://www.businessobjects.com/support for more information.*
We have installed "Crystal reports XI R2 SP4 full build" and "SP6 incremental". We have also installed "CrystalReports11_5_NET.MSI from CR XI R2 FP 6.4 .NET Server Install" as well as "CRRedist2005_X64.msi".
We are still getting the same error.

How to create an application with a 'Windows' like interface?

Hi,
I am trying to create an application with an windows like interface where menu selections need to open bound taskflows in a page/window but i can not get it to work. I did the following
- i created a page template with a panelStretchLayout
- added a menuBar with commandMenuItems
- created a start page based on the template
- created bound taskflows with page fragments for all menu items
- placed a dynamic region on the start page which initially shows a taskflow with an empty/blank page fragment
- change the dynamic region taskflow from every menuitem and added partial triggers on the dynamic region for every menu item
When i run the application the first empty page fragment is showed correctly but when i select a menu item the correct new page fragment is showed but it keeps showing a loading data .... hint and seems to freeze. So no data is showed while the underlying datacontrols work while using the bc tester.
Besides this problem i am wondering if i at all am going the right way with this with using a dynamic region? In the final application i will have a total of about 25 menu items over several menus and if they all will be showing in one main dynamic region with partial triggers set to all menu items it may get a bit complex? I saw you can also create a window in a popup which i like even more because it looks like an actual window but this is modal. I would like a bound taskflow to be opened whenever a menu selection is made.
Any pointers or tips or the solution to not showing data?
Kind Regards,
Andre

Hi Sascha,
If have not encountered that problem. Are you sure you have a taskflow entry under the executables tag in the page definition of the page which has the dynamic region on it? I have one like this:
<taskFlow id="dynamicRegion1" taskFlowId="${DynamicRegionBean.dynamicTaskFlowId}" xmlns="http://xmlns.oracle.com/adf/controller/binding"/>
During the selection of its initial value when it is rendering for the first time it should have the session bean already initialized. My bean looks like this:
public class DynamicRegion {
private String taskFlowId = "/WEB-INF/startTF.xml#startTF";
public DynamicRegion() {
public TaskFlowId getDynamicTaskFlowId() {
return TaskFlowId.parse(taskFlowId);
public String feitenTF() {
taskFlowId = "/WEB-INF/feitenTF.xml#feitenTF";
return taskFlowId;
public String themasTF() {
taskFlowId = "/WEB-INF/themasTF.xml#themasTF";
return taskFlowId;
public String feitCategorienTF() {
taskFlowId = "/WEB-INF/feitCategorienTF.xml#feitCategorienTF";
return taskFlowId;
The startTF is the initial taskflow and the other methods are being called from my menu. The dynamic region has the menu items as partial triggers. That is all i did.
Kind Regards,
Andre

Recording Captivate with Captivate

Hi
I need help...
How do I record Captivate with Captivate?
I mean... I have a project that requires that I show possibilities of Captivate recording how Captivate works with Captivate...
Any tips?? Please :s

Hi there
I'd be surprised if you were able to do that. The reason is that you would need the equivalent of using a Camcorder to film a movie segment and at the same time, record the Camcorder filming the segment. In other words, you would need a second Camcorder.
The good news here is that it should be pretty easy to fudge things with a dash of creativity. Just capture some screens of the recording dialog, then record the segment(s) and use a Red Highlight Box to simulate the Red Recording rectangle.
Hopefully this helps... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

LSMW with CI on System i and an additional Windows Application Server 4.70

Hi together,
I have a really tricky problem to realize a parallel processing LSMW Workload.
In truth it isn't a problem to the parallel processing. It is a problem, how to declare the paths to the input files.
The LSMW is splittet in four steps:
1. Read data
2. Convert Data
3. Creating Batch Input File (IDOCS)
4. Start Direct Input Program
The first three points are using file in the IFS.
In the 13 points of LSMW there is point " 7 Specify Files" where I can customize paths to the real existing input and output-Files, which are stored at the IFS on System i.
For example:
Legacy Data          On the R/3 server (application server)
    Materialtexte                  /usr/sap/direct/lsmw/material/matsta_text.txt
This works fine.
Now we have added a Windows Applications Server in front of the 2-Tier enviroment to have more performance to the BTC workprocesses. Now we have two servers shown in sm51. One is the central instance (CI) and the other is the application server (AS), which is working together with the CI.
<b>Now the big bug:</b> In the LSMW transaction, you can submit the job to batch (BTC) and can't choose the server (Instance) where the batchjob should run. So, sometimes the batchjob runs on the CI (iSeries) and sometimes the batchjob runs on the application server.
But this is the problem, because the files in the IFS are only stored at IFS on iSeries. And if the Job runs at the application-server, the files is not found, and the job end abnormal.
Now I tried to find a good solution. So I want to declare a patch in LSMW, that the batchjob is running successful at CI and AS.
So I tried:
\iSeriesshareusrsapdirectlsmwmaterialmatsta_text.txt
But this is not really working, because the SAP WP can't find this file with this path.
There is a second possibility: Not to submit the batchjobs by pressing F9 in the transaction LSMW but making an extra job in sm36 for each job. Not very smart !
There is a third possibility: To duplicate the import Files to each Windows Application Server. Then it is possible to submit by pressing F9, whatever server will be used.
So my question is: What is the right way? There must be some poeple in the world who have done a migration with iSeries an Windows Application Server together? Or not?
best regards,
Carsten
Message was edited by: C.Schulz
path corrected:
iSeries\share\usr\sap\direct\lsmw\material\matsta_text.t
        Carsten Schulz

>
\iSeriesshareusrsap/direct/lsmw/material/matsta_text.txt
Windows doesn't understand forward slashes, you need to use backslashes all way:
Try the following on one of the application servers:
Start - execute
notepad \iSeriesshareusrsapdirectlsmwmaterialmatsta_text.txt
If you can open the file, that's the way to go.
You'd need to check in your program, whether the job is been executed on Windows or non-windows and substitute the slashes accordingly.
Markus

CF11 is crashing ( application pool suffered a fatal communication error with the Windows Process Activation Service)

I have a cluster of 2 IIS web servers on Windows Server 2008 R2. They had been running on CF10 for over a year (if not two) with no problems. I upgraded one server to CF11 and now that server is crashing while the CF10 servers is still running fine.
In the Windows event log I'm seeing 4 instances of this error:
"A process serving application pool '******' suffered a fatal communication error with the Windows Process Activation Service. The process id was '4652'. The data field contains the error number."
Then finally:
"Application pool '******' is being automatically disabled due to a series of failures in the process(es) serving that application pool.".
Looking at the application pool in the IIS admin it is stopped. Restarting will resolve but it will eventually crash.
What could be the issue?
-Phil

I'm seeing in the CF logs leading up to the crash:
Jun 04, 2014 11:11:31 AM org.apache.coyote.ajp.AjpProcessor getRealPathFromServer
SEVERE: Error in getRealPathFromConn
java.net.SocketException: Connection reset by peer: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(Unknown Source)
at java.net.SocketOutputStream.write(Unknown Source)
at org.apache.coyote.ajp.AjpProcessor.getRealPathFromServer(AjpProcessor.java:402)
at org.apache.coyote.ajp.AbstractAjpProcessor.getRealPath(AbstractAjpProcessor.java:1276)
at org.apache.naming.resources.FileDirContext.doGetRealPath(FileDirContext.java:202)
at org.apache.naming.resources.BaseDirContext.getRealPath(BaseDirContext.java:424)
at org.apache.catalina.core.StandardContext.getRealPath(StandardContext.java:4660)
at org.apache.catalina.core.ApplicationContext.getRealPath(ApplicationContext.java:432)
at org.apache.catalina.core.ApplicationContextFacade.getRealPath(ApplicationContextFacade.ja va:333)
at coldfusion.runtime.ServletContextWrapper.doGetRealPath(ServletContextWrapper.java:184)
at coldfusion.runtime.ServletContextWrapper._doGetRealPath(ServletContextWrapper.java:116)
at coldfusion.runtime.ServletContextWrapper.getRealPath(ServletContextWrapper.java:98)
at coldfusion.filter.FusionContext.getRealPath(FusionContext.java:999)
at coldfusion.filter.FusionContext.getRealPath(FusionContext.java:937)
at coldfusion.runtime.RuntimeServiceImpl.resolveTemplatePath(RuntimeServiceImpl.java:866)
at coldfusion.tagext.lang.IncludeTag.setTemplate(IncludeTag.java:420)
at cfApplication2ecfc1835967654.runPage(C:\Data\http\domain\apps\Application.cfc:3)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:246)
at coldfusion.filter.SilentFilter.invoke(SilentFilter.java:47)
at coldfusion.runtime.TemplateProxyFactory.resolveComponentHelper(TemplateProxyFactory.java: 538)
at coldfusion.runtime.TemplateProxyFactory.resolveName(TemplateProxyFactory.java:248)
at coldfusion.runtime.TemplateProxyFactory.resolveName(TemplateProxyFactory.java:159)
at coldfusion.runtime.TemplateProxyFactory.resolveFile(TemplateProxyFactory.java:120)
at coldfusion.cfc.CFCProxy.<init>(CFCProxy.java:138)
at coldfusion.cfc.CFCProxy.<init>(CFCProxy.java:84)
at coldfusion.runtime.AppEventInvoker.<init>(AppEventInvoker.java:64)
at coldfusion.filter.PathFilter.resolveApplicationScope(PathFilter.java:195)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:124)
at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:94)
at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:58)
at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:62)
at coldfusion.CfmServlet.service(CfmServlet.java:219)
at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)
at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:241)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)
at sun.reflect.GeneratedMethodAccessor118.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.intergral.fusionreactor.j2ee.filterchain.WrappedFilterChain.doFilter(WrappedFilterCha in.java:97)
at com.intergral.fusionreactor.j2ee.filter.FusionReactorRequestHandler.doNext(FusionReactorR equestHandler.java:472)
at com.intergral.fusionreactor.j2ee.filter.FusionReactorRequestHandler.doHttpServletRequest( FusionReactorRequestHandler.java:312)
at com.intergral.fusionreactor.j2ee.filter.FusionReactorRequestHandler.doFusionRequest(Fusio nReactorRequestHandler.java:192)
at com.intergral.fusionreactor.j2ee.filter.FusionReactorRequestHandler.handle(FusionReactorR equestHandler.java:507)
at com.intergral.fusionreactor.j2ee.filter.FusionReactorCoreFilter.doFilter(FusionReactorCor eFilter.java:36)
at sun.reflect.GeneratedMethodAccessor117.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.intergral.fusionreactor.j2ee.filterchain.WrappedFilterChain.doFilter(WrappedFilterCha in.java:79)
at sun.reflect.GeneratedMethodAccessor116.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.intergral.fusionreactor.agent.filter.FusionReactorStaticFilter.doFilter(FusionReactor StaticFilter.java:53)
at com.intergral.fusionreactor.agent.pointcuts.NewFilterChainPointCut$1.invoke(NewFilterChai nPointCut.java:41)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:501)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:422)
at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:198)
at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.jav a:607)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:313)
at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)

Recording Captivate 4 with WPF windows applications

Similar Messages

Maybe you are looking for