Recording User Events (such as pauses) during Quicktime video watching?

Hi everyone,
There's likely to be some way to do this but I spent 1 hour googling and couldn't find anything useful so I thought I'd give this a shot in case any of you have any hints or advice!
I'm interested in embedding a Quicktime video in a webpage and having a client stream it. I want to be able to detect when the client pauses or stops the video, when the client restarts the video, etc. Essentially I'd love to be able to log data every time the user triggers some event (such as by clicking the pause button). I know one can trigger different events using sprites, but I think those are only for inside the Quicktime video itself, not for catching events on the player (such as hitting the pause or stop button).
If anyone knows how this might be possible to do, I'd love to hear about it. I think the Mac OS X server might have some related capabilities, but it's about $500 which is above my budget limit. (I need this capability for a side project)
Thanks a lot!
powerbook Mac OS X (10.4.4)

Have you installed any applications to your n95-4 (n958GB) phone, and installed it to either phone or mass memory? The problem only starts occuring after installing applications to phone or mass memory.
I am not sure if the issue starts after an application is isntalled on phone memory or mass memory.
I have duplicated this issue and IT IS A KNOWN PROBLEM WITH THE N95-4. I duplicated the issue on 2 NOKIA N95-4's. If you install an application, lets say for example youtube for mobile and Yahoo GO on phone memory; the video recording will start to pause every 3 or 5 seconds. This only happens when mass memory is used.
The pausing will not occur if you switch to phone memory. There is no fix and I hope nokia is aware of this problem and hopefully they are working on a fix. I hope the next firmware update will include the fix.

Similar Messages

Can we pause during a video recording?

I had wonder that if that's possible for any apple device that we could pause during our recording usually like how the samsung devices, is there gonna be an update for Apple for that?

Some FTP clients will allow you to do this with files you are uploading to the internet, and some have ways to copy files to and from your local hard drive, so in theory, I guess it's possible this could be done, assuming you want to start a file copy, stop or suspend it, then re-start it again later.
Try using Forklift.
http://www.binarynights.com/forklift

My desktop with OSX spontaneously pauses during news videos and movies

I have a desktop using OSX and it has been working fine, without any problems on web searches, etc. But recently when I try to watch news videos or clips from sources such as CNN, CSpan, PBS or BBC, etc, the video suddenly pauses. Usually it will restart after 30 seconds to a minute but not always. The same thing has been happening when I watch a tv show or movie on Hulu. Does anyone know what might cause this? It's a fairly recent occurrence.

1. System Preferences > Flash Player > Advanced > Delete All
     Press the "Delete All" button
    Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
   Download it first.
   The next step is important.
   Click Safari in the menubar and select “Quit Safari”.
    Follow the prompts and install it.
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.
3. Safari > Preferences > Privacy
    Press the button “ Remove All Website Data”.

Pause during making video?

Is there a way to pause while videoing then resume so that it's all one video?
thanks

Thanks I may try that one too.
Another problem I had is that I've had this Ipod touch since 2009 and many of the apps said they couldn't work on it. finally tried iFast video and it worked.

Macbook Pro Get's Hot During GamePlay + Video Watching

I'm new to mac's, so sorry if this may sound new to anyone. I recently purchased a new MBP 2011 edition, 13in, 2.7ghz with 8gb of ram.
I downloaded Steam and the game Counter Strike, I noticed that the computer started to get very hot after a few minutes of playing. A friend told me to download the iStat Pro widget so i could see what the temperature of the computer was. The CPU gets up to around 200F, that's the highest temp that i've seen it get to. During gameplay, there is no lag, it's smooth as butter, but the CPU temp hovers around 196F. This is while it's on a cooling pad (with a fan) an propped up a few inches off the table.
I've talked to a Genius at the GeniusBar in the Apple store and he said that it was sort of normal and that MBP's usually run hot, I also read some articles about the new i7 Processor witih folks having similar issues. My only worry is that I'm ruining my brand new MBP and the processors inside. As relating to the title, when watching Vimeo and having a few programs open, the comp is running at about 185F.
Are others having a similar problem to this? If so how are you dealing with it and is it normal? Will these high temps harm the life of the processor? I have to use this thing all through college (starting in a few months) and I would just like to make sure that I'm not doing anything to harm it.
Thanks for any help!

Hi NyJeff,
Those temperatures sound very normal for the i7 architecture in the littler 13" package. Keep in mind, that there's only one fan in that unit, not two fans like on the 15" & 17" units. Having the cooling pad will definitely help when gaming. The heat sinks and fan are designed to protect the hardware, in addition you'd be amazed how long the hardware will last even when constantly exposed to those sorts of temperatures.

Steps for Recording Portal Events in Database

I want to record user events from our applicaiton to the portal database for reporting purposes. I know there are some configuration chnages to be made in the server for this purpose. Also I need to know from an applicaiton perspective how to code this.
Can someone give some info regarding this.
Thanks

Hi Guys ,
I am new to events & campaigns in portal .
I need help in writing a custom event
and then registering it so that it can be used
to trigger a campaign .
Even a simplest of example will do .
Please help me with this.
regards,
Shilpa

LV 7.0 extremly unstable while working with user events during edit time

hi
i create and register several user events inside an initializing vi and then pass the registered events to the event structure using dynamic events in my top level vi. all works fine untill i do some changes to the registered events, e.g. changing names, datatypes or add/remove some events. when doing so my LV 7.0 chrases after opening the top level vi (exception error, no *.cpp errors). all changes i made are going to nowhere. i understand that after the changes i made the registered events in my init.vi-indicator dosn't match the events in my event structure, but i can't understand that LV chrashes.
here are my questions:
1. is it a known problem to LV 7.0?
2. should i reinstall LV 7.0
(i have LV 6.x and 7.0 on my machine)?
3. is there a fix?
thanks in advance
greetings
chris
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

Hello Chris,
I have been looking into your problem and have come across one possible known bug in LV 6.1 that may be showing itself in 7.0. If modifications are made to the typedef of a registered event the vi will crash. I was hoping that you could post a small piece of your code and instructions on how to reproduce the crash. This way I can see if this is the same bug, a programming error, or an installation error. I can then determine if there is still a bug that needs to be looked into by our research team.
Thanks,
Caroline
National Instruments
Thanks,
Caroline Tipton
Data Management Product Manager
National Instruments

How to Trigger SY-UCOMM User Event in ALV

Hi Folks,
Currently I have a classic ALV report where I need to remove all the standard ALV buttons and replace it with one custom button. Given that, there is a parameter in REUSE_ALV_GRID_DISPLAY that deals with the user command event. But during the debug/execution of the custom button, the value of sy-ucomm(R_UCOMM in my example below), is always blank.
Moreover, I did some relevant search here in SDN also before I paste my F1 here. If you're going to take a look at my code below, it's exactly the same as what the other relevant topic in user event in ALV.
PERFORM pf_status_kanban USING rt_extab.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = w_repid
      i_callback_top_of_page   = 'F_TOPOF_PAGE'
      i_callback_pf_status_set = 'PF_STATUS_KANBAN' "Exclude ALV standard buttons
      i_callback_user_command = 'F_USER_COMMAND'     "Subroutine for SY-UCOMM
*      i_callback_top_of_page   = 'TOP_OF_PAGE'
      is_layout                = t_alv_layout
      it_fieldcat              = t_alv_fcat[]
      it_sort                  = t_alv_sort
      is_variant               = t_gs_variant
      it_events                = t_events            "Events for AT USER-COMMAND
*      IT_EVENT_EXIT            = 'AT USER-COMMAND'
    TABLES
      t_outtab                 = t_output.
FORM F_USER_COMMAND USING    p_r_ucomm   LIKE sy-ucomm
                              rs_selfield TYPE slis_selfield.
CASE r_ucomm.
    WHEN 'DOWNLOAD'.
      PERFORM f_generate_col USING t_output.
    WHEN OTHERS.
ENDCASE.
ENDFORM.                    " F_USER_COMMAND
FORM F_USER_COMMAND USING    p_r_ucomm   LIKE sy-ucomm
                              rs_selfield TYPE slis_selfield.
CASE r_ucomm.
*    WHEN 'EXCEL'.
*      PERFORM f_generate_col USING t_output.
    WHEN 'DOWNLOAD'.
      PERFORM f_generate_col USING t_output.
    WHEN OTHERS.
ENDCASE.
ENDFORM.                    " F_USER_COMMAND
Thanks and regards,
Jaime

Hi Martin,
Yes, I ensure that the function code in my custom button is exactly the same as the condition for the sy-ucomm.
The call routine for the PF_STATUS_KANBAN is just a test since it seems like Iu2019m chasing a phantom issue here.
Yes, w_repid is set correctly.
DATA:
w_repid LIKE sy-repid.                                              "Report ID.
INITIALIZATION.
w_repid = sy-repid.
It seems like the documentation im reading
Parameter R_UCOMM contains the function code triggered. is not happening as expected...
Thanks.
Jaime
Edited by: Jaime Cabanban on May 7, 2009 10:16 AM

Error while saving record "User:johndoe": Error -14071

I have added my augmented users from the AD server. When I select user and to apply a setting under Preferences I get this on attempting an "Apply", Error while saving record "User:johndoe":Error -14071. I'm authenticating to my LDAP not AD/All Domains.
I have the server bound correctly to the AD server. Bound to AD, then promoted to OD master.
Tried WGM from another Mac, same error.
I recall my AD admin extending the ad schema last year for OS X 10.4.
Thoughts? Thanks.

Thanks David and Mabel, and all for the suggestions. I did go through "Leveraging Active..." prior to posting. I did try your method of canceling the authorization to WGM and viewing Directories. I would select a user from this method and try to apply something from MCX, but still got the -14070 error. Yes, I do have my client bound 1st OD, 2nd AD, with OD first on the search policy for the client.
I though I had solved my issue by authenticating to WGM and LDAP. Then selecting Groups and the Members tab, I define an OD group and select that group. I can then click the "+" towards the right of the window. Then select my AD there which populates. I can add my AD groups or single users to my OD group. Then I'm able to apply MCX settings. But, no "blue" circle next to the group's silhouette. How is my method possibly incorrect?
Also, at some point I unbound my client from AD and it seems the client is ok with getting AD info off my OD server. Example, my AD sharepoint mounts for PHD.
But, I do have a pause of 20 secs. are more when logging into the client as well as accessing applications. Side effect of my method?

User Events Generation - TicTacToe

Hey everybody,
In order to get a better understanding of how the event structures are used, I have been playing around with making a tic tac toe game (ironically, i did not know that was a coding challenge until I just started this thread).
Anyways, the way I'm doing it is by dynamically registering a mouse move event during mouse down on a boolean control (your game 'marker'). Then when the control is moved overtop of an activex container the boolean lights up. Right now, however, it only works for one of the game pieces ('Dot 8').
My question is this, can someone please show me how to create a user event? I want to create an event where when any boolean control's position is within the bounds of the activex containers it will light up. I could do this manually with a whole lot of logic (you'll get the idea if you check out the code) but that is rediculous and wouldn't help my learning exercise at all.
Thanks so much for the help!
Jonathan
(Code is attached)
Attachments:
events.vi ‏107 KB

If you want to look at the code of my interface posted HERE, See attached (LabVIEW 7.1). It uses simple mouse-down events on the array indicator to determine where to place the correct piece.
Enjoy!
(Disclaimer: The code is not fully tested and documented. There could be bugs There is also room for improvements)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
TTT-Trainer3.zip ‏2139 KB

Event Handler/Create User Event bug

This is a problem I've run into a few times on my system (Win2k) so I finally went back and reproduced it step by step since it wasn't too hard. It causes LabVIEW to crash and exit without saving.
- Create an Event Handler
- Place 'Register Events', wire output to dynamic event terminal
- Place 'Create User Event', wire output to 'Register Events'/User Event
- Place an Empty String Constant [""], wire to input of 'Create User Event'
- Set empty string property -> Visible Items > Label = True
- Rename label from "Empty String Constant" to other such as "Event"
OR
- Create a cluster constant with something in it
OR
- Place a boolean constant
- Set boolean property -> Visible Items > Label = True
- Name label something su
ch as "Event"
- 'Add Event Case...' to the Event Handler, select Dynamic / : User Event
- Delete the constant wired to 'Create User Event'.
- Place a constant of a different data type and wire it to the input of 'Create User Event'
LabVIEW immediately disappears (all changes are lost) and this error is displayed:
================================
LabVIEW.exe has generated errors and will be closed by
Windows. You wlil need to restart the program.
An error log is being created.
================================
If there is a more appropriate place to post things of this nature that don’t really add to the discussion group, but need to be brought to the attention of NI, please post a URL or submittal method. Thanks...

Thanks for the detailed request. We are aware of this exact issue, and the problem was actually fixed for LabVIEW 7.0 for Mac/Unix. Unfortunately, it did not get fixed for the initial release of LabVIEW 7.0 for Windows, but we have plans to include the fix in the first LabVIEW patch for 7.0.
Also, the Discussion Forum is great for notifications of this kind. For future reference, you also have the options of emailing NI engineers directly, or calling us with suspected bug fixes, if you would like more direct communication.
Thanks again, and have a great day!
Liz Fausak
Applications Engineer
National Instruments
www.ni.com/support

Producer Consumer Subpanels, User events and DAQ

Hello All,
I am working on a Producer Consumer application and have beed looking at subpanels for user navigation. The application needs to be capable of responding to user generated events but also manage data received from attached data acquisition and control hardware. This is a 2 part question.
I need to implement about 15 screens in this application and have started integrating subpanels. I need to be able to navigate from one subpanel vi to another using subvi buttons but dont understand how to build this functionality. Can I build functionlaity so that when I click on a subpanel loaded vi's button it will load the vi referenced by that button and the original dissappears.
I have a 3 loop producer event template consisting of (1)data acquisition producer, (2) user event producer and (3) consumer loop but theres not much detail, are there any reasonable templates out there? I have seen the data- consumer and user-consumer but no mix of all 3.
Advice appreciated
Chris

I use subpanels to host my display vi's and control them dynamically. I would have a loop or vi process that manages your subpanel. You could use user events, queues or notifiers to send messages to this subpanel manager to perform the basic functions such as loading a vi into a subpanel, removing a vi from subpanel (you can remove and stop the vi or keep the vi running in the background or even make it a floating vi.) A subpanel button can create a local event which in turn could trigger a user event or message to the subpanel manager. I have attached my subpanel manager to give you some ideas...
Attachments:
Subpanel Manager.vi ‏39 KB

Front Row pauses during DVD play

I've played at least 5 (3 of which were brand new) different DVD's in Front Row that randomly pause during play. After a few seconds the movie continues to play. I took the computer into the store to have the optical drive replaced, but it keeps happening. I tried just using DVD player and the same thing happens. Since the drive has been replaced, now I get "skipping over damaged area" when it pauses (only in DVD player). These are BRAND NEW dvds, there's no way they can be damaged already. Any ideas, suggestions, anything???

That's interesting. Since it doesn't seem to be a hardware problem, you might use the Accounts System Preferences to create a brand new user. Log out and log in as the new user. Does the DVD Player application give you the same trouble when logged in as the new user? If not, then a preference or setting your original user has must be interfering. Or some kind of preference file corruption. If the new user does have the same trouble, it might be time to run the Disk Utility and make sure your permissions are repaired and the disk is repaired. If that still doesn't help, it may be time to do an "archive and install" of Mac OS X to get a good copy of the DVD Player application back...
-Doug

[HELP] How to records user who use SQLPlus or SQL editor?

Dear Gurus,
Is onyone know how to record user who use SQLplus or any SQL editor?
for instance...
user1 using SQLplus on monday august 9.30.21 PM...and I have table which record this for audit user.
Or..
Can I block user who connect to oracle using SQLPlus?
If anyone know how to do this..please inform me...
Thanks and Regards
Erie

You can enable Auditing (AUDIT_TRAIL) and audit at the Session Level to record Logon and Log off of a required user. This can be enabled to be recorded in the audit table or operation system file. You can also audit user statements etc.
For example, to enable auditing connect for user UGONIC
SQL>audit connect by UGONIC;
TO disable it
SQL>noaudit connect by UGONIC;
Check in the SQL Reference for the AUDIT statement and requirements.
If you do not want the user to connect at all via SQL*Plus, you can use PRODUCT_USER_PROFILE to disable a users access to SQL*Plus or at the lower level, disable specified SQL*Plus and SQL commands for the user. You need to run the PUPBLD.SQL script as system user (if not run yet) and add records to it as required.
Example: After running PUPBLD.SQL. This entry stops the user UGONIC from using the drop command at the backend in SQL*Plus.
INSERT into product_user_profile (product,userid,attribute,char_value,date_value)
values('SQL*Plus','UGONIC','DROP','DISABLED',NULL);
Note that if a user is already connected by the profile entry, it is not activated on that session, but on subsequent logons. Again read the requied security documentations for this.
For both auditing, you need to set the required database intialisation parameters and know where to get the audit records (in tables, views or OS file). For instance, when using tables, you maintain and query tables like audit$ to view the logs. When using OS type logging, it is recorded on the path specified in the AUDIT_FILE_DEST init parameter (In Windows, it is logged in the Windows Event and you can view it from the event viewer).

User Event

The Help surrounding User Event seems circuitous to me. I can find out how to name an event, register an event, send a event, and act when an event occurs. What I can't figure out is: what is the actual event in the examples shown? In the Programmatically Fire Events.vi example, I see a cluster of two integers attached to the Create User Event. What "event" is represented by this? A change in one integer, both? How is this a "User" event? What I need is a simple TEXT explanation that builds up a User Event step by step with numbered steps, starting with an explanation of what kinds of events can be used as User Events and building from there through the creation and registration of events to their actual use. This is a fundamental tool for modern instrumentation programming and I don't feel I'm getting the help I need.

I'm looking at Programmatically Fire Events.vi
I see that the Create User Event has some constants attached which apparently "type" the event.
I see the Register User Event which I suppose adds to a database of accessible events.
Inside an event called "Slider", I see a Generate User Event.
I am confused because the Event used in the Event Structure Case 0 is "Slider" Value Change. I can understand an event in that context: the slider moves, values change.
But then inside that event, a refnum connects to the Generate User Event this serves as a "name" but it is only code-readable so at this point, I have no idea what the name of the event within the event is.
Connected to Generate User Event is a bundle of "something" called NewVal and a 0. I suspect this means the User Event is "generated" when position has a new value (presumably the value resulting from the slider value change) and delay is 0.
The event is "generated" but I STILL don't know what that means.
In Event Structure Case 1, triggered by event Repeat switch Value change, a Generate Event with the same refnum "name" as before occurs when some calculated values are reached.
After the loop finishes, the refnum goes out and generates a new User Event with the same "name"
when position is -1 and delay is 0.
I am primarily interested in events as triggers for Cases in Event Structures. I thought User Event meant some kind of user-defined event that I could use for such a trigger. Instead, I see in this example that some other event triggers the Event Structure Case in which the User Event is "generated" and I have NO idea what happens that "event".
So, either the term "event" is used in some wildly differently context or I need more help. I have now seen the same refnum generate an "event" based on three different inputs. How is that not too confusing for a Help example?
How can I tell what help I need? This is the most confusing example I have encountered in my long history as an engineer.
Where does the generated event go? How do I use THAT event?
I just can't tell from what is provided and I can't find a tutorial or a book that describes it.

Recording User Events (such as pauses) during Quicktime video watching?

Similar Messages

Maybe you are looking for