Recording video but it's without sound on iphone 4

when i playback the recorded video there's no sound :S

I also had this problem a couple of weeks ago. I recorded video on my iphone 4s and there was no sound on playback, but when I synced the video to my MBP, the audio was there. I was surprised I couldn't find the answer on the internet. I found some postings where people said to stick a pin in the hole next to the microphone, and they swore that worked. But, that sounded a little dangerous to try on my new iphone4s.
So I finally went to the genius bar and asked them. It turned out that the volume buttons on the side of the iphone are set differently for each of the built-in apps that use it. So while I had the volume set comfortably for cell phone use, it turned out that it was set to zero for video playback within the Camera app.
As a former user interface designer, it's perplexing to me that the volume buttons DO NOT universally apply to all the apps on the iPhone. You'd think the Apple manuals or website would tell users, but I couldn't find this in any of their documentation online. So I hope this helps, and put your pins down right now!

Similar Messages

My iPhone 5 records Videos but without Sound!

My iPhone 5 Records Videos but without any Sound. Restart the phone does Not help! Any Ideals???

GLAD I COULD HELP!
for the key clicks try to go under settings>sounds and see if the "change woth buttons" is pushed to ON. and try to change the volume when your clicking the keyboard
if that doesnt work, then try playing a song to see if your volume is down, or if your speakers are capoot

Using the camera on my iPad 2, I can record videos, but can't get them to play back. I'd appreciate your help with this!

Using the camera on my iPad 2, I can record videos, but can't get them to play back. Can you help me with this? Thank you!

Previous version was a touch to change, this one is a slide to change.

5530 Xpress Music can record video but cannot take...

I got a problem with my nokia 5530 xpress music and i saw on many forum that many people have this problem.
When launching camera i can recorde video without any problem but when switching to photo mode nothing apear, it enter the interface to take the photo but no image appear on the screen.
There are many people discussing about the same problem for the 5530 ? what the problem with this mobile phone.
I try to update the firmware with nokia ovi software updater, doing hard reset, format and factory default, but still same problem.
Nokia please dont tell us to go to the nearest service centre. Because here in mauritius it cost a lot of money.
I take a photo of the issue as you can see it enters image mode, nothing appars. Wheras in video mode i can see and recorde normally. So what the problem with all the Nokia 5530 xpress music on the market ??
I think that nokia fail on this model.
To many people having similar issue...
So nokia do you provide someting for this issue...
Thanks for replying back
Kind Regards Patrick
Attachments:
noki bug.jpg ‏38 KB

Them Phone is not completely lay on the table, please see the video file you will have a better idea of the exact problem ... Some test i did shifting between photo mode and video mode.
Video i put i here because i canot upload it there
http://pages.intnet.mu/djpatrick/cbug.mp4
Video of bug 5530 camera !!!!
Thanks
Attachments:
Photo Mode.jpg ‏50 KB
Video Mode.jpg ‏56 KB

My ipod records video with very, VERY bad sound

Everything else works just fine. I've tried reseting the ipod, but nothing happened.
The exact problem is that I can record the video, but, for example, when I talk, no matter how loud I do it, I can't hear myself on the recording. The sound is "weak".It sounds as if I were talking from a very long distance ....
PLEASE HELP ME, I really love this ipod, it's my favorite nano an everything else work perfectly, thanks .

It's an iPod touch 4g if that helps any

MY I POD PLAYS VIDEOS BUT THERE ISNT ANY SOUND aNY IDEAS ON HOW TO FIX?

HOW DO YOU GET SOUND TO PLAY ON VIDEO CLIPS?

Quicktime, Quicktime Pro and iTunes don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
See:iPod plays video but not audio.
You need a 3rd party converter to convert the file with both audio and video.
Videora is one, and there are others.
http://www.videora.com/en-us/Converter/
Search the iPod video forum for other recommendations, but beware of spammers trying to sell you their own product.
And may we ask you to turn off your caps lock? It's considered shouting.
Incidentally, the iPod video forum is here.
http://discussions.apple.com/forum.jspa?forumID=808

My new ipod nano plays videos but there is no sound, why?

My new iPod nano that plays videos has no sound going along with them. It's not a problem with the iPod, (I don't think) because the sound won't play on iTunes either, yet my music in playing just fine both on my ipod nano and in itunes. I dragged and dropped the video into itunes then I converted the video then used the convert selection for ipod. Why is there no sound? Is there something I am doing wrong? My 30gb ipod did worked just fine when I did it that way but my new ipod nano won't. Is there something else I have to do before I can watch and listen to videos?
Any help would be greatly appreciated.
Thanks!
Becca

QuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, iTunes & the iPod (both of which use QuickTime) only show the video and no sound.
iPod plays video but not audio of some exported files
http://docs.info.apple.com/article.html?artnum=302588
One way to work around this is to use MPEG Streamclip to convert the files to fix this issue...
http://www.squared5.com/
Frequently asked questions about viewing and syncing video with iTunes and iPod
http://docs.info.apple.com/article.html?artnum=302758
GUIDES TO: Converting Video for iPod - Mac & Window
http://forums.ilounge.com/showthread.php?s=&threadid=123067
Patrick

Record videos with N95 in concerts = Sound distort...

If i record video in a concert of music with mi N95, the sound recorded is distorted, I think it is problem of low. Is it possible to resolve this for firmware?

Nothing ou can do about it!
It's an inbuilt chip that the Record industry insists are put into mobiles and recording devices to ensure you can't bootleg their concerts and so you have to buy their overpriced merchandice. Also it send a message to the local copyright lawers, so expect a nice lettter in the post in a few days...........
JOKE!!!!!

I CAN DOWNLOAD VIDEO BUT IT HAS NO SOUND

I CAN DOWNLOAD VIDEOS BUT WHEN I WATCH THEM THEY HAVE NO SOUND AT ALL,WHAT IS WRONG?

Try using MPEG Streamclip to convert the videos; more information on this issue is available in this article.
(29960)

Built in mic and isight records video but no audio- what happened?

Hello everyone,
My iMac won't record audio for iMovie. I have done this before; but now tried adjusting settings etc but still nothing. Sound comes out (Garageband, itunes, alerts etc), and sound goes in (Garageband; no problem) but it won't work for iMovie. Any suggestions? Thanks!

Hi
I would go to the Apple menu (top left corner)
Then down to System preferences
Here select Sound
See if Sound in is set to Line or internal mic.
Yours Bengt W

I don't get sound when I record video, but I do on download video recorder apps

So I tried to record a video yesterday for Vine app, and there was no sound, and I thought that's weird, so I tried it on the normal video recorder app, and no sound. I downloaded a video recorder app, and the sound works on that... so what's wrong with my phone? How do I fix that?

Hello there, Mark.
The following Knowledge Base article offers up some great recommendations for troubleshooting issues with apps downloaded from the App Store:
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
In your case you may also want to close all apps that are running during the "Restart the App" step.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Record video from camcorder and separate sound source direct to mac?

Hi. I want to make a video of myself playing piano (or whatever) with high quality sound. I bought a nice Panasonic mini-dv camcorder with a mic input, firewire, and USB for the job. Unfortunately the sound is ruined by the camcorder's compression kicking in and spoiling the quiet parts. Apparently the compression can't be turned off.
What would be ideal would be to record straight to the Mac with the video coming from the camcorder and the sound coming from my high quality mics. I could send the sound either as analog or already converted via firewire or lightpipe.
Help?

I'm running two serious condenser mics into a "board", panning one left and one right and sending them out stereo into the camcorder. Even with external mics the audio compression still kicks in and tries to bring up the quiet parts, which not only destroys the dynamics of the music, it brings the noise floor way up so that it's quite audible.
My camcorder is a Panasonic PV GS65, which in 2005 was the cheapest 3CCD camera they made. The video is quite good but very few cheaper camcorders have mic inputs, let alone manual record levels.
I've never tried making movies before but after messing with Windows Movie Maker for a few minutes I've discovered that all I have to do is plug my camcorder into a firewire port and I'm ready to go.
It turns out that whether I use Mac or PC for video, I won't need the mic input in the camcorder after all. I'll record the audio into Logic Pro 8 as I shoot the video and one way or the other I should be able to sync them up pretty close.
My question still remains however: Is it possible to record the sound straight onto the video file from a separate source while shooting the video? Or is it only possible to record the one firewire source from the camera?

Export Video but no option for sound

I would be grateful if anyone could offer any suggestions on how to fix an audio issue with exporting video from Photoshop.
I am choosing the quicktime format however the option for sound is alwas greyed out. from the animation panel I have the audio enabled and I can hear it when I play back from within Photoshop.
I am using Photoshop CS4 extended on PC Windows 7
Any help or suggestions would be appreciated.
I understand the following -
For audio I need to choose Quicktime format
Photoshop is primarily image editing software (with video capabilities)

Here is a past post, hope this helps.
1. Bill Hunt,
Jun 26, 2011 9:12 AM in reply to J4e8a16n
Report
JP,
I do not have my CS5 Extended handy, so will go from the Premiere Pro (Adobe's video editor) side of the street. Bear with me on this, as PS-Extended might do things a bit differently.
When one is Exporting an AV file, there are two things that must be set:
Exporting both Audio & Video (in PrPro, these are done via checkboxes in the Export>General dialog screen)
Then, one must set Multiplexing * on the Export>Multiplexing dialog screen, to anything but "None." The choice is usually "DVD."
It's the Multiplexing Tab, that many miss. If set to None, then there will be two separate Export files - one for the Video stream, and one for the Audio stream.
Hope that gets you close, and sorry that I cannot open things up, and give you the exact screens and tabs in PS-Extended.
Hunt
* Multiplexing is the combining of both the Audio & Video streams into a single, discrete file. Multiplexing is usually OFF by default, though in PrPro, it's a "sticky," in that it retains the last setting, so if the user wishes to make a change, they must do so manually, and that setting will then stick, until changed again. The Export of separate files for Audio & Video is most often used, when one is doing the Export to go to a DVD, or BD authoring program, like Adobe Encore. It works best with elemental streams, rather than muxed files, and especially with MPEG Audio.

80 gb ipod will play my videos but there is no sound

i read the answer to why it doesnt have sound and the solution to the answer and someone said that i have to use a different converter so i chose one from the ones that this one guy listed on this forum but after that how do i transfer the video from the new converter program to the ipod? im using mpeg streamclip do i have to export to quicktime or do i have to convert to mpeg? I'm so lost and confused and frustated please help.
Windows XP

Im also having the same problem and would like a solution.

Recorded video has saturation clicks in sound track

Using my iPhone 4S running latest iOS6. Using the inbuilt camera app in video mode. I recorded a performance art event and all the audio on the video track has clicking sounds throughout which are so loud they have ruined the recording. Looking at the audio waveforms they all appear to be saturated where the clicks happen. There is no way to adjust the gain control using the camera app. Is there any solution or am I going to be unable to record any video in situations where the ambient sound is loud?
My phone is in a LifeProof case, if this makes a difference to the audio saturation.
Should I purchase a separate mini jack microphone?
Any third party video recorder app with gain control you know of?
Thanks,
Steve

Well, for what it's worth, I've not had too much success with it myself (otherwise I'd have made some suggestion).
If I have some minor clicks I tend to surgically remove them in editor. It can take ages, so I'd love to know an easier way too!
Quad 2.5 G5. 8 gigs. 250 & 500 gig Internal Drives. G-Tech G-Raid 1 TB Mac OS X (10.4.6) FCP 5.0.4 (FC Studio). Photoshop CS2. Sony HVR-Z1E and HVR-M10E

Recording video but it's without sound on iphone 4

Similar Messages

Maybe you are looking for