Records in last 24 hrs
I need to query LIKP to extract all records added in last 24 hrs.
select vbeln from likp
where ...
Check with below code :
data : date like sy-datum.
start-of-selection.
date = sy-datum - 1.
select * from likp into table i_likp
where erdat ge date
and erzet ge sy-uzeit.
Thanks
Seshu
Similar Messages
-
I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or at least maintain the charge over longer periods of time? I have a dc adapter. thanks
You should be able to use the battery if you get a car type charger which recharges mobile devices.
The full size iPads use a 10-12W charger, whereas the mini uses a 5W charger. Many car chargers only supply 5W. But at 5W, the car charger should give you some extra time on your iPad. It would be best to use a 10-12W car charger.
Cheers, Tom -
Dear Community members,
I am unable to synch photo albums from iPad 3 to iTunes on my Windows 7 pc.
In addition to Camera roll and iPod cache default albums, I have 6 other albums made from pix derived from the camera roll. Eg - Family pix in a folder, Office pix in another, Plant pixs in another, House architecture pix in another.......all also exist in the camera roll.
I have trawled the net for the last 8 hrs in vain!
I have ios5 on Ipad 3 and the latest Itunes on Windows PC.
As a precaution, I have used the windows "add pictures from...." to keep a copy in a separate folder in the windows desktop, but again it has all the pics mixed up together and not sorted as per the various albums in the ipad!
How to replicate the albums in the windows PC???
Regards
Sohal NSSync the photos back to the iPad using iTunes. You have to place the photos into a folder from which you sync photos. All photos that you want to sync to the device must be included in the main photos folder and selected to sync each time that you sync.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Photos Tab on the right.
Click on the Sync Photos From heading in order to select it.
Select the photos folder that you want to sync from.
Select all of the albums or photos within the folder that you want to sync.
Click on Apply in the lower right corner of iTunes
You can read more here.
http://support.apple.com/kb/HT4236 -
is it possible to stop the system time out on my imac? i have tried 5 times in the last 24 hrs.it will run for approx.3hrs,and then times out and i have to start
from the beggining againWhat is the url of the file your are downloading?
What web browser are you using?
What type of connection do you have to your isp? phone line, dsl, cable, fios...
Try iCab. It lets you restart a download.
icab.de
Robert -
Starting a few days ago my history only records my last browsing session.In other words it only records today's history.I am doing a research project and need all of my history.I uninstalled Firefox and loaded it again last night.When I checked today,yesterdays history is not there.So my history feature does not work,how do I restore this feature so that all of my history is recorded.I went into the settings and made sure that it is set to record all of my browsing history.The setting is correct.Would it be possible that I have a virus that is preventing this?
I would like to keep Firefox but if this cannot be fixed I will have to install another browser and I would not like to do this as I have been a Firefox user since 2005.Make sure that you do not run Firefox in (permanent) Private Browsing mode and that you keep the history.
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy: Use custom settings for history
*Deselect: [ ] "Always use private browsing mode"
In case you are using "Clear history when Firefox closes":
*do not clear the "Browsing History"
*Tools > Options > Privacy: History: [X] Clear history when Firefox closes > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords. -
Suddenly no sound... Please help. Been trying to fix it for last 3 hrs.
Can someone please help me with this no sounds issue. I've been trying to fix it for the last 3 hrs. until I've reached the point of wanting to hurt it. So I'm really hoping someone has had this problem before and knows what to do.
I've checked all of my settings. Everything to do with the ringtone sound as well as alerts, the sounds it makes when you send or recieve text.. Just non of the sounds at all work. Not even the clicking sound that the keyboard makes.
I've turned it off and back on after a min or two. I'm at my wits end.
I don't know what else to do. It's the iphone 3G.Jim,
Thank you, thank you, thank you. If I could get to you, I'd hug you!! Lol.
Yes, I feel really stupid, but that's okay as long as it works now. I don't know when I did it, but that was it! I had at some point hit that switch and it never occurred to me at all to check that. In fact.. I really forgot it was even there.
If it didn't cost so much, phone would've met wall a hour and a half ago.
Anyway. Many thanks for your help.
My name is Teresa btw and it's very nice to meet you. I'm really thankful that you guys are here. I'm brand new,(obviously)to the iphone. But other than tonight, I really like it. -
Any app that allows me to record the last few minutes of audio continuously?
I need an app that allows me to record the last N minutes of audio continuously until I stop it.
So, say I want it to record just the last 5 minutes of audio.
I could potentially have it recording for hours but I don't want an audio file that is mutli hours long - I just want the last 5 minutes.
You might ask, why I would want this ?
Say, you're trying to record something, but you don't know exactly when it'll happen, and when it a happens, it doesn't last long enough for you to turn on the phone and start recording.I saw an app exactly like that in the App store months ago.
It was for lecutres primarly.
When opened it always "records" like to build a buffer though not really saving. When you press record it will start really saving and can go back a ways based on options. So a student can listen to lecture but only press the record button when wanting to save something and have it able to save back x amount of time and forward until told to stop.
Sounds like exactly what you want. I just don't remember what it is called. -
When I try to record a song it only records the last few seconds of the song.
When I try to burn a CD of my song on garage band, it now only records the last part of the song. The program is constantly crashing also since I installed Mavericks.
I mean when I try to burn a CD.
-
After attempting to download the new OS, I received an error message when restarting the phone stating only that an error occurred while installing. After contacting tech support they told me to reset the system which I have attempted to do - for the last 12 hrs all that has happen is the apple insignia and the rotating wheel - any suggestions?
Have you seen this guidance
http://support.apple.com/kb/HT1808 -
Does ODI keeps the record of last run date of interface?
Target:Oracle
Source:MS SQL
ODI:11g
My requirement is I have a source table, Whatever operations performed on that (like insert,update etc) table, I want to load those records into the target table. For that I have created an Interface which runs daily at 6 PM.While loading, I have put one filter which loads only those data which got inserted/updated on current date(GETDATE()).Suppose the case, If my ODI has been down(because of any reason) since 3 days. In this case I have no option to load the records who got changed in that three days. On the fourth day I start the ODI then, how can I get data which got changed in last three days.
Is there any place where ODI keeps the record of last run date or something of interface ?
If I use CDC in that case, once the ODI down then the journalism can not able to keep the changed data info.
How can I load the changed data into the target.?
Thanks,
ShrinivasIf you have a date column in source and target , I guess you might be having a you are using date , you can use a filter and write the expression like this
Source_date > (select max(date_created/update) from schema.target_table)
I have validated this expression and it validated by ODI , I did not try running it , please give it a shot
Suresh -
I have reset all my settings and content of my iphone 3GS but for the last 3 hrs I am stuck at the apple logo and after sometimes its getting off and on by itself but what is coming back is the same apple logo and nothing else is happening. pls advice.
Read https://discussions.apple.com/thread/4875757?start=0&tstart
-
Need to record data for 4 hrs at a rate of every 30s
Hello,
I'm fairly new to LabVIEW and need assistance. I have this VI that manually records torque and temperature by hitting a button. I want to alter it so that when I run the program I can automatically collect data every 30 sec for 4 hrs and then the program stops. Any help would be appreciated. I have attached the VI.Bob_Schor wrote:
One of the most difficult things for people new to LabVIEW to avoid is the temptation to "just start coding" -- as often as not, you end up with a bunch of (often Express) VIs wired together that do something, but rarely what you want it to do.
I recommend starting with thinking about the overall design, asking yourself "What do I want to do?". In your case, it sounds like "Record data (not yet defined) every 30 seconds for 4 hours". Now break this down -- what does "record data" mean? How much data? How many channels? What data rate? What do you want to do with the data?
This might be a "unit" of your code, that is, this "Data Recording Block" might, in some ways, stand alone. One way this could happen would be if you recorded, say, 5 seconds of data, wrote the data to a uniquely-named file, then stopped recording. "Aha!", I (don't) hear you saying, "this should be written as a sub-VI called "Save Some Data" that I put in my main program and call every 30 seconds until 4 hours have gone by".
What is this isn't your model? Maybe you want to start data acquisition, keep it running, and every 30 seconds save some aliquot of the data to a file. Fine, but that's another Design Decision that you should make before starting to code. This kind of model sounds liek it might be a Producer (continuous data acquisition)/Consumer (periodic saving of the data) design, with the Consumer "worrying" about saving, say, 5 second aliquots of data every 30 seconds for 4 hours. This last bit (namely getting the Consumer to "do its thing" properly) might be handled by a State Machine design ("Save to File", "Wait for next Sample Time", "Count Elapsed Time").
Here is a piece of Good Advice -- never put an "Abort LabVIEW" command in your program! Notice you have a Stop button to stop the loop, and can OR wire the output now going to the Abort to the same Stop indicator. Use Abort in the rare instance where failure to instantly kill the program will result in someone's death or injury -- you're not yet ready to code at this level.
Bob Schor
To expand on this idea, I usually write up at least a "casual" requirements document - even if it's just a few paragraphs - and code each "requirement" as a subVI. -
My iPad has been 'upgrading' for the last 12hrs.That is, after I had downloaded the new version of iCloud, and pressed 'Install' without entering my password. It is probably searching for it. How do I go back to the window that will allow me to enter my password. I have tried switching off the device, but each time the 'upgrading' comes on. I have also switched it off and left it on the charger for at least 6 hrs.
My iPad has been 'upgrading' for the last 12hrs.That is, after I had downloaded the new version of iCloud, and pressed 'Install' without entering my password. It is probably searching for it. How do I go back to the window that will allow me to enter my password. I have tried switching off the device, but each time the 'upgrading' comes on. I have also switched it off and left it on the charger for at least 6 hrs.
-
Select Expert Record. Last 6 months and week start date on Monday
Hello,
i am trying to use the select expert record to grab the last 6 months worth of data. I require the week start day to be a monday and end on a sunday.
Can someone please provide some advice the best way to do this
kind regards
davidHello Abhilash,
Once again thanks for your reply.
Yes this is correct, when it goes back 6 months i need it to skip the days prior and begin on a monday as we are reporting on a mon-sunday basis.
I have tried your formula Date field >= dateadd('m',-6,currentdate) and it seems to grab 6 months of data, but the group weeks are not grouping from Monday to Sunday...
kind regards
david
Edited by: davitali on Dec 2, 2011 9:35 AM -
MRBR Query for Records Since Last Run
I have a requirement to pull all the blocked invoices since the last programs run.
The main table in MRBR is RBKP_BLOCKED. I'm needing to pull all of the records in that table since the program last run.
The main tables I know I need are RBKP_BLOCKED, RSEG, EKKO
How is RBKP_BLOCKED filled? How can I know when something was changed so I can pull the correct records?
RSEG holds the blocking types like SPGRS etc, but where do those get set?
Thanks for your help.
<b><REMOVED BY MODERATOR></b>
Message was edited by:
Alvaro Tejada GalindoMost important tables in MRBR are
Table Name Short text
ADRC Addresses (central address admin.)
EKBE History per Purchasing Document
EKBZ History per Purchasing Document: Delivery Costs
EKET Scheduling Agreement Schedule Lines
EKKN Account Assignment in Purchasing Document
JEST Object status
QALS Inspection lot record
QAMB QM: Link Between Inspection Lot and Material Document
RBCO Document Item, Incoming Invoice, Account Assignment
RBKP Document Header: Invoice Receipt
RBKP_BLOCKED Logistics Invoice Verification: Blocked Invoices
RBMA Document Item: Incoming Invoice for Material
RSEG Document Item: Incoming Invoice
Regards
Maybe you are looking for
-
CRM ISA R/3 Edition on AP 7.0 Pricing Routine Number range error
Hi Experts, For our R/3 ISA Secenerio I have developed a Pricing Prepare Routine (PRP). I have uploaded this routine into AP 7.0 ( which runs my IPC 5.0). Now when I try to register my PRP routine I'm not able to do so because of Number range not def
-
Is it possible to set up a bootable external hard drive
Is it possible to set up an external hard drive by copying my system folders, etc from my Ibook to my firewire drive??? If not is there a way to do it w./o the system DVD
-
Wacky Drag and Drop issue with JNLP
I'm sure I'll have to be a bit more descriptive but I'll just throw this out and see if anyone has any suggestions. I've got a swing app which is an administration tool to a rules engine I have built. I distribute the app to users using JNLP 1.2. Her
-
How do i show XML in the browser ?
<%@ page contentType="text/html; charset=iso-8859-1 <table> HTML TAGS ARE HERE </table> out.println("Content-type: text/xml"); string xml=bean.getXMLdata(); out.println(xml); // but this is not coming to the browser !! how do i show XML then ?
-
Level 1 0-149 Level 2 150-499 Level 3 500-999 Level 4 1,000-3,999 Level 5 4,000-7,999 Level 6 8,000-19,999 Level 7 20,000-34,999 Level 8 35,000-49,999 Level 9 50,000-79,999 Level 10 80,000+ I am a level two, so I know what I get upon reaching 150, bu