Records Management Center 'Submit a Record' webpart does not work

So I built a records management center for our HR documents and it has been working great until this morning.
Suddenly the 'Submit a Record' webpart that came default with the page no longer works, it just refreshes the page when used. Any help in fixing the webpart would be appreciated, and failing that if I could get a link or instructions on how to make
a new one that would help too.

Hi MSGX, I'm guessing something may have been changed on the administration end. Check the following link for what to look for and possible fixes (ignore the error messages, I think your problem is similar and you're just not seeing them):
http://sharepoint-mattharmon.blogspot.com/2013/02/issues-submitting-to-records-centre.html
cameron rautmann

Similar Messages

The giant seach bar in the center of the home page does not work, what is this for? also under it is a bar with no title?

there is a search bar in the middle of the home page, I tried using it and it does not work. what is this for?

Battery does not appear to charge
Important: iPod touch cannot be charged with a FireWire-based power source.
Verify that the power source being used is working properly.
If connecting to a computer's USB port, verify it is a high-powered USB 2.0 port. Note: The USB ports on most keyboards don't provide enough power, so if you're connecting iPod touch to a keyboard, make sure it has a high-powered USB 2.0 port.
Verify the computer is turned on and not in sleep or standby mode. If iPod touch is connected to a computer that's not turned on or is in sleep or standby mode, the iPod touch battery may drain.
Try another USB port.
Try charging from a USB charger if available.
If that does not help, try another USB cable if available.
Learn more about charging the battery.
The Home button isn't working
Put the iPod Touch to sleep.
Wait a couple of seconds.
Press the Home button.
iPod Touch should wake up.
If iPod Touch does not wake up, then iPod Touch should be serviced.
Resources for Service
http://support.apple.com/kb/he57
https://selfsolve.apple.com

Connect is not working on Hyper-V Manager on Windows 8.1 ( vmconnect does not work )

Hi all,
I have been running Windows 8.1 and in Hyper-V Manager, i can see 2 VM ( 1 Linux-Ubuntu , 1 Win 7 ) for couple of months.
Few days ago as usual i wanted to connect one of them while they were running but it did not work. I tried actions below already:
- Checked the event logs and they were saying vmconnect is crashing
Faulting application name: VmConnect.exe, version: 6.3.9600.16384, time stamp: 0x5215cae5
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17415, time stamp: 0x54505737
Exception code: 0xe0434352
Fault offset: 0x0000000000008b9c
Faulting process id: 0x6c0
Faulting application start time: 0x01d02e59f75297d7
Faulting application path: C:\WINDOWS\system32\VmConnect.exe
Faulting module path: C:\WINDOWS\system32\KERNELBASE.dll
Report Id: 351cf3fd-9a4d-11e4-beaf-7446a0bad879
Faulting package full name:
Faulting package-relative application ID:
=================================
Application: VmConnect.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.ArgumentException
Stack:
   at Microsoft.Virtualization.Client.Interop.IMsRdpClientNonScriptable3.set_NegotiateSecurityLayer(Boolean)
   at Microsoft.Virtualization.Client.InteractiveSession.RdpViewerControl.SetSecureModeOn()
   at Microsoft.Virtualization.Client.InteractiveSession.RdpViewerControl.CreateRdpClient(Boolean)
   at Microsoft.Virtualization.Client.InteractiveSession.RdpViewerControl..ctor(Microsoft.Virtualization.Client.InteractiveSession.RdpConnectionInfo)
   at Microsoft.Virtualization.Client.InteractiveSession.InteractiveSessionForm..ctor(Microsoft.Virtualization.Client.InteractiveSession.RdpConnectionInfo)
   at Microsoft.Virtualization.Client.InteractiveSession.VmisApplicationContext.TryParseCommandLine(System.String[])
   at Microsoft.Virtualization.Client.InteractiveSession.Program.Main(System.String[])
=================================
- Stop antivirus Avira, remove Hyper-V, restart add Hyper-V again, restart
- reboot, shutdown computer
- add new VM, delete existing one
-add/delete/modify virtual swtich and add/delete/modify virtual switch accordingly the connected VM
- restart Hyper-V Management services from services.msc
I dont know what is going on... When i open Hyper-V Manager i can start/stop VMs and i can see from preview that they are running.

Hi all,
A
After few months, problem occurred again and i could not install the windows from the scratch over and over again.
I started searching problem online and eventually i found the FIX.
Looks like Registry Entries are getting screwed up somehow.
My "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProvider" was looking exactly as below:
", schannel.dll"
And i made it as below:
"msapsspc.dll,
schannel.dll, digest.dll, msnsspc.dll, credssp.dll"
The solution for the other person in the link ( cannot share link since site does not allow me to ) as a source was only missing "credssp.dll" whereas i was missing everything except "schannel.dll". Strange...
============================
Adding credssp.dll to the list of SecurityProviders in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders
fixed it for me.
My full registry entry now reads "msapsspc.dll,
schannel.dll, digest.dll, msnsspc.dll, credssp.dll"
============================

Trying to create Managed Server service in Win 2003 does not work

Hello ... I've created an AdminServer service with no problems:
SETLOCAL
set DOMAIN_NAME=ClassicDomain
set USERDOMAIN_HOME=D:\Apps\Middleware\user_projects\domains\ClassicDomain
set SERVER_NAME=AdminServer
set PRODUCTION_MODE=true
set MEM_ARGS=-Xms256m -Xmx512m
call "D:\Apps\Middleware\user_projects\domains\ClassicDomain\bin\setDomainEnv.cmd"
call "D:\Apps\Middleware\wlserver_10.3\server\bin\installSvc.cmd"
ENDLOCAL
I can get the AdminServer to start and get into the Admin Console.
I'm trying to create a service for the WLS_Forms Managed Server and can create the service, which does start ... but it does not start my WLS_Forms Managed Server:
SETLOCAL
set DOMAIN_NAME=ClassicDomain
set USERDOMAIN_HOME=D:\Apps\Middleware\user_projects\domains\ClassicDomain
set SERVER_NAME=WLS_Forms
set PRODUCTION_MODE=true
set
JAVA_OPTIONS=-Dweblogic.Stdout="D:\Apps\Middleware\user_projects\domains\ClassicDomain\stdout.txt" -Dweblogic.Stderr="D:\Apps\Middleware\user_projects\domains\ClassicDomain\stderr.txt"
set ADMIN_URL=http://localhost:7001
set MEM_ARGS=-Xms1024m -Xmx1024m
call "D:\Apps\Middleware\wlserver_10.3\server\bin\installSvc.cmd"
ENDLOCAL
Both services/servers reside on the same box.
Can someone lend a hand and indicate what is failing?
Thanks

That is not typically the case since you could normally also use a start script like:
<DOMAIN_HOME>/bin/startManagedServer(.sh/.cmd) managedServerName
One thing to note is that Node Manager is the mechanism by which the Admin Console is able to start the managed servers. The Admin Server has not mechanism to do this directly, it is indirectly done via Node Manager.
You should ask in the Forms / Reports forum for how that product is typically started with WebLogic in 11g.
Forms

Managing table titles in FrameMaker 12 does not work

I have a mysterious problem in FrameMaker 12. When creating a table I am not able to move the table title. When changing the setting to below or above or whatever and pressing Apply nothing happens. The feature works allright in FrameMaker 11. I have tried with both existing and new documents and the it doesn't matter. I can not do anything with the title position of tables.
Are anybody else expiriencing the same problem ?
regards
Bjørn

I don't think it ever was officially documented as the Help for reformatting tables since FM8 states:
To redefine a table format:
1. Click in a table whose format you want to redefine, and choose Table > Table Designer. If the table you click in has format overrides, these overrides--not the catalog format's definition--appear in the Table Designer.
It does seem odd though that in FM12 with the table selected via the anchor, the Designer does show any overrides applied, yet one cannot apply the override this way. Something has changed and it may be an unintended side-effect of something else. What the overall implication for this is unknown, but the programming team should be made aware of this.

How can I download adobe flash for my 2006 imac OS 10.4.11? Lost it recently and repeated attempts manage to download but it then does not work.

How can I download adobe flash for an imac intel using 10.4.11? This disappeared recently and although I go to adobe and download successfully, when I try to access video on web it says I need to download adobe. Very frustrating. Can anyone help?

Looking at Adobe's site there is version 10.3 for Intel Macs running OSX 10.4 or 10.5. There is version 11 for Macs running OSX 10.6 or newer. Most web sites don't really need the newest FlashPlayer, but if you are trying to view one that really does intensive video then maybe it does require Flash 11. You aren't very specific as to which exact error message you are seeing.
If a site does require FlashPlayer 11 then you will have to upgrade your operating system.

SUBMIT does not work in background...

Hi guys,
We have a copy program of a standard transaction and once we use this copy program in the main program via SUBMIT... it does not work in background...
Why is this so,,, Please advice...
THanks!

Hi,
When executing some program using the statement like SUBMIT prog_2 WITH parameters and RETURN.
In foreground PROG_2 is executed, and once you click on the BACK button the code written after this SUBMIT statement will be executed.
If you are executing the same in the BACKGROUND mode, no feasibility of clicking on BACK button, hence control will remain in the PROG_2 only after executing its logic.
Please code accordingly.

Recording desktop in Quicktime 10 does not work in SL

OS 10.6.8 and QT 10.0 (131)
I want to record one of my desktop processes with QuickTime (v10.0). However it does not work, I get the following message:
The operation couldn't be completed. (OS Status error -108.)
I do get a file that appears to be the recording but it does not want to open. And I do need to force quit QuickTime almost every time the error appears.
On my other Mac, also with 10.6.8, it works fine. So I am puzzled.
Anybody know what this could be? How to fix? Open to suggestions.
I was also looking for a version of QT10 to reinstall it but can not find one. ( I was hoping this might fix it).

Why not use QuickTime 7.6.6 which is located inside your utility folder?
I was also looking for a version of QT10 to reinstall it but can not find one.
You can custom install directly from your system disc that came with your computer. Follow the onscreen custom install instructions.

I have upgraded firefox 4 to firefox 5 but it does not work with real player record plugin 14.0.3......so I want to revert the upgrade to 4....please give me solution or firefox 4

Question
I have upgraded firefox 4 to firefox 5 but it does not work with real player record plugin 14.0.3......so I want to revert the upgrade to 4....please give me solution or firefox 4

Go to your actual realplayer (program), click the top right button (Realplayer with an downwards arrow) and update your software. Make sure Firefox is closed while you do this.
::Worked for me::

Java does not work at all upon using the update manager to update to firefox 3.6.10 for Ubuntu 9.0.4

OS: Ubuntu 9.0.4
Browser: Firefox 3.6.10
upon updating to firefox 3.6.10, java does not work at all.
websites that use java do not work at all anymore, when they worked just fine before the updating thru update manager. e.g. hulu website cannot play any of the shows.
i can give the folder of bookmarked pages i tried.
how to do that on here, i've yet to see if possible.
i can even give saved text from the terminal concerning certain attempts.
when i updated thru update manager, it gave some weird java plugin that wasn't there before "The IcedTea Web Browser Plugin IcedTea6 Java Web Browser Plugin (execution of applets on webpages)".
i uninstalled this as instructed by an answer found in one of the pages i saved, cuz it was conflicting w/another java program the updater said i needed. right now, i don't remember for sure what it was. it perhaps was realplayer flash or Java itself. w/all the hours/days of searching i put in, it's difficult if not downright impossible for me to remember all the specifics of what i tried.
i've searched throughout many webpages (including many searches on mozilla, ubuntu, java, etc) for instruction in fixing the problem.
oh, and incidentally, on the Java site, when i try the verify test of Java, firefox pops up with that yellow bar right below the slew of tabbed website windows, giving the statement "additional plugins are required to display all the media on this page. (w/link to) install missing plugins ." which is what i do, go thru the requesting plugin installation. it comes up with, guess what, the IcedTea Java Plugin. i click on the 'next' in the "Plugin Finder Service" box that pops up, & all it gives me is "No plugins were installed. IcedTea ...Plugin failed. and the link 'find out more about plugins or manually find missing plugins'". the link takes me to some of the very things/plugins that wouldn't install in the first place. the Java test failure is a LOL funny, as what plugin it is saying is required (IcedTea) is a recommended alternate program to display the very test in the first place.
i followed the given instructions on those many searched pages, in every case (barring what i may have just plain missed), but to no avail.
i've even gone to the point of trying to reinstall the previous 3.5.13 firefox version, from mozilla site. even that wouldn't install.
i've tried installing Java for my sys direct from it's site. nada.
now it's time for me to post the problem & perhaps someone will come up with some kind of "dummy" way to fix it.
until then many sites a regularly use are totally useless to me on this fast puter.
the only way i can get to use such sites, are two choices: 1. use a dinosaur laptop, which is slower than molasses & cannot handle to any streaming stuff, or 2. use an available internet access puter at the library. but useage for ea person per day is limited to only one hour a day. and one can end up waiting for an hour or more ( in the busiest periods) to even get to use one.
so, is there anyone at all, who knows any for-sure working fix for this problem?
thanks muchly :^D
p.s. i can't pay anybody any money for such help, as is required in certain sites (e.g. Java website), cuz i don't have any.
i can pay in labor tho, if there is someway to find someone who can physically be at this puter w/me, taking me step-by-step
sorry for the 20-pg essay. i hope it was all clearly understood. if, not, well, clear communication is always what is needed, ask away.

Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 9.0 r999
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

FPM Message Manager message's HyperLink does not work in Table

Hi FPM experts,
I use FPM in my application and I want to use FPM Message Manager with hyperlink pointing to cells with errors in a table with report_bapiret2_message. The hyperlink does work when pointing on stand alone input field, but it does not work when pointing on a input field in a table.
Here is a piece of my code. What's wrong?
data is_message type bapiret2.
is_message-type = 'E'.
is_message-id = 'TEST'.
is_message-number = '1'.
wd_comp_controller->mr_fpm_message_manager->
   report_bapiret2_message( is_bapiret2 = is_message
                                         io_component = wd_comp_controller
                                         io_element = lo_el_table_elements " point on the element in my context
                                         iv_attribute_name = 'VALUE' ). " Name of my attribute in context
Thanks
Davy
Edited by: Davy Veilleux on Jan 4, 2009 4:19 PM

Any answers to this question?
I am facing the same issue. Using FPM Message Manager with the io_element and iv_attribute parameters pointing to an element in an context node having cardinality = "0...n" does not show the hyper link.
Any Help is Appreciated.

Loging into game center with apple ID does not work. What do i need to do?

My apple ID does not work for signing into game center.

Apple TV doesn't come with HDMI cable, so you would have had to buy the cable separately unless the Apple TV was bought used. Did you purchase the device from Apple or an authorized reseller?
Are you sure you're trying the right input?
The other is a smaller one that is for micro USB (which is used for support purposes only)

I want to disable or remove Game center from my iphone. It's always pop up during i play hay day game. So i can not solve this problem. Any way i try to log in game center my several Apple id account but it does' not work. I am still stuck in log in page

I want to disable or remove Game center from my iphone. It's always pop up during i play hay day game. So i can not solve this problem. Any way i try to log in game center my several Apple id account but it does' not work. I am still stuck in log in page

The Game Center app is pre installed and cannot be removed from the device.
Best thing to do is move it to the last available screen.
Hold down the Game Center app until all the apps jiggle then sliide the Game Center app to the right from one screen to the next. This requires a bit of finesse, but it's doable.
Press the Home button one time to stop the apps from jiggling.
For the Apple ID issue, try resetting.
Tap Settings > General > Reset > Reset All Settings
Then try your Apple ID and password for the Game Center app.

HP Officejet Pro L7590 Printer - HP Solution Center does not work

I am not able to get the Solution Center suite to work because the installation has an error. I am using Windows 7 Home Premium. The printer I am installing is the HP Officejet Pro L7590.
If I go to Devices and Printers and add the printer. The driver Windows 7 driver would work, it would detect the printer and the test page and everything would be fine.
However, if I install using the software provided by HP for the L7590 it would result in an error and it would not work.
The failed driver installation is only from installing the full bundle software provided by HP, if by itself through Windows 7 it would be fine.
Because of the failed installation using HP software the HP solution center does not work.
In Devices and Printers, the printer has the yellow exclamation point requiring troubleshooting, I click on troubleshoot and no device drivers were found. In addition, I could not remove the printer. Before installing the HP software, I could successfully install the printer and there would be a green checkmark, and there would be an option to remove the printer. This leads me to believe HP has a faulty software bug that is causing the error.
I am suppose to use the HP add a printer shortcut that populated on my desktop after installing the software, the first time it would show the failure to successfully install the driver, afterwards it would not even detect my printer if it is plugged in. If I remove the usb and reinsert it, the Windows would just show the failed driver. I repeat, it failed after I install the software, it works fine without. The primary reason I want the software is to use the scanning feature.

Hello NickRT, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having software installation issues. i would like to try and assist you.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would reinstalling the HP Officejet Pro Full Feature Software and Driver.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

WRT610N disconnects and does not work with Vista or media center extenders like the DMA2200

Linksys and all other router manufacturers advertise the greatness of the wireless 5ghz band (especially with 802.11n), but I’m beginning to have my doubts. It is true that the 5Ghz band is hardly being used so you'll have virtually no one to compete with. However, the 5Ghz distance in no way compares to 2.4Ghz, and as a matter of fact, I find it to be quite terrible. At approximately 20 feet away, both my Linksys DMA2200 and HP notebook barely get 1 bar using the 5Ghz N band with my WRT610N router. In comparison, while using my 2.4Ghz WRT54g router, I get 5 full bars at that range, and at least 2 bars from anywhere else in my house.
I have all Linksys equipment in my house as I have been impressed with all of their 2.4Ghz in the past. However, I’ve recently upgraded everything to dual-band N equipment and found numerous flaws in each of the new devices, plus none of them really even play well together. My setup is: Linksys 610n router, DMA2200 media center extender, and a WUSB600N Dual-Band Wireless-N USB Network Adapter for my laptop – all of which are currently using the most up-to-date firmware. Other devices include a WRE54G extender and Nintendo Wii.
Problem #1) The LELA software with the new N devices doesn't even recognize that my DMA2200 is a media center extender. Using LELA, I should be able to select my media extender and allocate more bandwidth for streaming media. However, since my extender only shows up as an “unknown network device” those options are greyed out. I tried to manually change the device to a media center, but still no go. I suppose you can manually allocate bandwidth in the router setup somewhere, but considering these are all Linksys products, it’s absolutely ridiculous that an option specifically incorporated in the LELA software for a Linksys Media Extender does not work!!!
Problem #2) If you are only using one system with the router, the router might actually work as intended. For most of us though there are going to be at least 2 or more systems connected to the router (wired, wireless, or a combination of the two) such as a PS3, Wii, laptop, PC, media extender, Xbox, etc. If that’s the case, you’re probably screwed because you WILL experience frequent dropouts… ESPECIALLY if just one those clients is a VISTA machine. Check the Linksys forums and you will find that this seems to be a problem with all of the new Linksys routers (610N, 310N, and 110).
Here is a Microsoft article that explains the issue
http://support.microsoft.com/kb/928233/en-us
Problem #3) Because of problem #2 I will never be able to get rid of the dropouts since my network is using one of Linksys’s media center extenders. The DMA2200 is essentially a VISTA PC to some extent and accepts DHCP requests the same as a VISTA PC. Since it is not really a PC though, there is no registry modification that can be done to alleviate the VISTA problem (not that the registry mod really works anyways). So as long as I try to use my DMA2200 wirelessly with my WRT610N router, the frequent dropouts will occur and there’s nothing I can do about it. This is REALLY TERRIBLE since the DMA2200 is specifically designed to be used with the WRT610N router in order to take advantage of the 5Ghz band and wireless N transfer rates. You absolutely need 5Ghz wireless N to efficiently stream HDTV WIRELESSLY, but if you lose your connection every 10 minutes, it is impossible to watch any type of streaming media.
Problem #4) As mentioned already, when the “N” 5Ghz range is working on the WRT510N router, the distance sucks compared to standard 2.4Ghz G, N or mixed mode networks. You can try to make it better by strictly using N products, disabling the 2.4ghz band all-to-gether, and using the wider 40mhz frequency, but it doesn’t really help. The higher 5Ghz band is a more concentrated signal and therefore simply does not reach as far as the lower 2.4ghz band. I wonder why all of these new products state that the 5Ghz range will increase your distance, when in fact it actually makes it worse?
So… basically, this router does nothing that it claims too and is basically rendered useless on any network with a VISTA machine. This has not been addressed by any Linksys firmware updates or VISTA software updates so there is no reason to even consider using this router if you you’re using VISTA or some type of VISTA Media Center Extender such as the Linksys DMA2200.
Although, I’ve always sworn by Linksys in the past, the amount of wasted time, frustration, and horrible support has really changed my view about them. I’ve reverted back to my old trustworthy WRT54g router and had to run cable through my house so that I wouldn’t have to box my DMA2200 extender up and let it collect dust in the attic. It’s really disappointing that I spent all this money to buy this equipment specifically because they’re supposed to work together, but in fact they don’t. Plus what’s the point of having top notch wireless equipment if you have to run cables in order for them to work?
Message Edited by bobbodavis on 11-15-2008 07:37 PM

I have fixed all the IP adresses to avoid the DHCP problem but I still have problems.
I have sereval scenarioes:
1. MC < 1Gb wire > WRT610N < 5.0n WIFI > MX
I can see HDTV on this one but it disconnects
2. MC < 1Gb wire > WRT610N < 2.4b/g WIFI > MX
No HDTV and disconnections
3. MC < 2.4b/g WIFI > WRT610N < 2.4b/g WIFI > MX
No HDTV but no disconnections - but very slow and streaming like youtube
4. MC < 100Mb wire > WRT610N < 2.4b/g WIFI > MX
No HDTV but nice picture - testing for disconnections right now - 30+ min.
Result:
This test was very good. Stabil streaming, no disconnects for an hour. Won't support HDTV but the rest seem to work fine.
5. MC < 100Mb wire > WRT610N < 5.0n WIFI > MX
Not tested yet - looking forward to this - might bring me HDTV.
Result:
This gives HDTV but there is a problem with stability on the streaming but very difficult to see on the picture. Testing for disconnects - now tested for 30 min. - no disconnects.
This looks really promissing.
I am pretty sure that the WRT610N have a problem in the switching part of the router specially when it has to switch from 1G to WIFI. I bought the WRT610N to get HDTV on WIFI and Cisco markets the DMA and WRT610N as a perfect match. But it definately have problems - i still do not understand their silence about this.
I will come back with the last results when I have them
/John
Message Edited by Infraxpert on 01-05-2009 04:38 PM
Message Edited by Infraxpert on 01-05-2009 05:35 PM

Records Management Center 'Submit a Record' webpart does not work

Similar Messages

Maybe you are looking for