Recordset tests OK but won't save...

Using DW CS4 I have a MySQL db and have created a couple of connections that work just fine to create and read documents on the db. I now want to select only documents where one of the fields is Null.
I used Server behaviors and selected Add Recordset and Advanced. Created the SQL code below, clicked "Test" and it worked fine.
SELECT *
FROM feedback
WHERE feedback.suggestions2 IS NOT NULL
When I clicked "OK" to save the recordset it failed with an error message "TypeError:this.node has no properties".
I created a new recordset with SQL below
SELECT *
FROM feedback
This tested OK, but failed the same way when I clicked "OK" to save.
I'd really appreciate suggestions on how to start troubleshooting this.
Thanks,
Tony

Hi,
It's a MySQL db containing text in about 15 fields per document, or row. I tried creating a recordset without the WHERE statement and it failed the same way. I have found a work-around which is to copy a recordset from another web page on the site and then rename and modify it to include the WHERE statement. This works OK but it shouldn't be necessary.
The input form can be seen here www.hollisterairshow.com/feedback I'm using DW to set up a Master Detail Page Set, the Master page is here www.hollisterairshow.com/feedback-suggestions-master.php , the Detail page can be accessed by clicking on the feedback number in the left hand column.
Regards,
Tony

Similar Messages

  • Apple configurator - Passcode Restriction saving on one ipad but won't save on the others

    I have read a few different posts about the ipad restrictions passcode not transferring to the rest of my ipads but can’t understand why it saves on one of them ?
    I have 2 cabinets with 10 ipads in each both linked up to an imac using Apple Configurator.
    On iPad One I’ve set up the available restrictions within profile, added apps, changed wallpaper/background etc and the enabled restrictions using a passcode on the actual device and backed up.
    I then apply the backup and profile to the remainder 19 ipads and everything looks fine except enable restrictions is set to off on all of the 19 ipads.
    So I think this can’t be a setting that’s transferable. I then un-tick Automatic Refresh in Preferences and go through all 19 ipads and enable restrictions manually choosing the exact same passcode for all devices.
    I plug them back in and refresh the devices. All 19 loose their passcode except for ipad one ?
    Why does ipad one save this setting yet all other 19 devices cant save theirs ?
    I intend of giving out the 20 ipads for public use but can restrict users from going in to settings, then reset and erase the device back to factory settings.
    This seems like a basic requirement for anyone deploying ipads for public, business or education use.
    Is there a smarter way to do this that I a missing?

    HI nsdjoey,
    Many thanks for your reply.
    Hopefully this will be an update within Apple Configurator soon. The configurator has the potentail to be a great tool but lacks soem really basic features.
    I'll take a look at making an encrypted backup in iTunes, although none of my iPads are showing up as devices within iTunes. Maybe becasue they are in supervise mode ?
    Also just noticed that iPad 20 is not appearing in the Configurator even though its conected and lit up in the sync cab. I've change leads and ports in the cab but getting nothing.
    Thanks for your advice.

  • Asked to send edited and signed document but won't save

    I'm having a problem with a document I've been asked to fill out, I've filled out the document, I've signed the document, and then clicked on 'Done Signing' The prompt to save comes up, but when I go back into the system, I find the file is not there. It prompts to save the document with -signed on the end of the original document. I've tried saving onto the original but no luck. I originally sent the document and was told it came out blank.
    I'm using version 10.1.5.
    Any help would be appreciated.

    I am experiencing a similar issue with Adobe reader 11.
    I have a number of users who will be authorizing and signing invoices with a digital signature (not Echosign).
    The intention is then to save the file in the same location on the Network, replacing the original.
    However, since using version 11, it appears that as soon as you add a signature to an invoice, you are prompted to save the file as: {filename}-signed
    Having the '-signed' added to the file, then means we will be left with 2 copies of the invoice on the network drive. And as the other part of the process involves openign the invoices by using a hyperlink, we will have big problems with duplicated files etc...
    I know that the user should be able to delete the '-signed' extension, but errors may occur, where they don't always delete accurately.
    So, is there a way to switch this facility off?
    thanks

  • HTMLResources works when tested local but won't work when the folio is uploaded

    hi there,
    creating a DPS app with on the cover, inside a popup, a button that calls a pdf in the HTMLResources.zip
    Button's function
    HTMLResources/cover/filename.pdf
    filename.pdf sits in the folder 'cover' inside the HTMLResources folder before zipping.
    This works when I test it local, and it has worked online some days ago in a previous release of the folio.
    But since this morning I always get this error:
    "The requested url was not found an this server." (-1100)
    I've checked everything twice and the online Folio Producer tells the HTMLResources.zip is uploaded
    Any ideas what could be wrong ? How to solve this ?
    Thanx in advance,
    Herman Belgy

    -> [[Troubleshooting extensions and themes]]
    Check and tell if its working.
    Not related to your problem but your plugins needs to be updated.
    -> Your Flash plugin is quite older. You need to update it.
    * Adobe Flash Player 11.0.1.152 (3.59 MB)
    * http://get.adobe.com/flashplayer/
    -> Your Java plugin is quite older. You need to update it.
    * Java Version 6 Update 29
    * http://java.com/en/download/index.jsp
    * [[Using the Java plugin with Firefox]]
    -> Update All your Firefox Plugins
    * https://www-dev.allizom.org/en-US/plugincheck/
    * http://www.mozilla.com/en-US/plugincheck/
    '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

  • HELP! My phone takes pictures but won't save them.

    I have an iPhone 4, when I updated to iOS 7, the camera stopped working. Screenshots and taken pictures show up on the bottom left of the camera screen, showing that they were taken, but don't exist in the camera roll when I click on them (or in any other folders). As for video, the blinking red dot appears and goes away instantaneously, then the app crashes.

    Also sync again to transfer any recent purchases to your iTunes library, then restore as you did before (by clicking on the name of your phone on the left side of iTunes, going to the Summary tab to the right and clicking on Restore).  But this time, when you go through the setup assistant at the end of the process select Set up as New iPhone (see image below).  Then take a photo and test whether or not you can see it now.  If not, you'll have to make an appointment at the genius bar at a nearby Apple Store.
    If it's working now, turn on iCloud syncing for calendars, contacts, etc. again (in Settings>iCloud) to recover your iCloud data (if prompted, choose merge), and sync with iTunes to transfer your apps, music, and other iTunes media back to your phone.  You can sync any videos back to your phone by selecting to do so on the Movies tab of your iTuens sync settings., and put your imported photos into a folder and sync that back to your phone by selecting to do so on the Photos tab.

  • My camera will take pictures but won't save them

    I try to take a picture or a screen shot on my iPad but they don't save to my photo library. WHY!?

    "When I try to put the song on my iPod mini it wont let me. I go to the music section of my iPod mini and the songs aare not in bold like in purchased they're a light colored"
    Grey text when you look at the content and lock symbol at the bottom of the screen simply shows that your iPod is set to automatically update. If you want to access your iPod directly, drag songs onto it, play it through your iTunes, connect it to a second computer etc. you just need to change the update method to manual in the iPod preferences. For more detail see this tutorial: Managing content manually on iPod
    One thing to be aware of with manually updating is that the iPod also has to be manually ejected before the "Do Not Disconnect" message will go away. Safely disconnect iPod

  • Instant Alpha is working but won't save

    Instant alpha appears to work but then when I save (as a PNG) it comes up as black background and transparency is gone (checked multiple times & uploaded to multiple places). What am I doing wrong here? It has worked in the past for me.

    I would try emailing iTunes store customer service:
    http://www.apple.com/support/itunes/store/browser/
    I would try switching your Payment Method to "none" and then signing out of your account completely (Store menu > Sign Out). Then, sign back in and go to enter your CC info again. You might want to contact your financial institution to see if they've switched your billing address over in their systems yet. If they goofed something, it might explain why iTunes is rejecting your info.
    CG

  • Streaming radio works in Test Movie but won't work in browser

    Hi all,
    I've built a simple radio interface that has only Play, Stop and volume adjuster controls.
    Play button starts an online stream:
    play_btn.onRelease = function () {
         stream= new Sound();
         stream.loadSound("http://radio.xyz.org:9050", true);
         stream.start(0, 50);
    When I test movie inside the Flash Pro, i see that it is fully functional.
    Running the swf on the local with Flash Player works perfect also.
    But after uploading to server, I can hear no sound at all.
    I've set "allowScriptAccess" to "always", but it didn't help: ( http://www.erkanbeyaz.com/radyo )
    Briefly, the local swf works but the remote one doesn't. And I'm sure this is not a path issue.
    I  guess this is a flash (and/or browser) security issue and could be  overcome by setting the appropriate parameters within the Publish  Settings.
    But how?
    Any help would greatly be appreciated.
    Best.

    Hi Atul,
    I have checked my bindings but the only values the method needs, is the releasecode (which is filled) and the object BUS2012 (which is also filled). The method gives back the exception 1006  responsibility_fail. I have checked the FM BAPI_PO_RELEASE and I even have made sure that the containerelement UseExceptions is marked with X (should be done by the program itself).
    What I also see when I generate my testworkflow is the message Indicator "Results Parameter" missing in BOR method RELEASE, but I cannot find out what I need to do to make sure I have this Results Parameter.
    Hope you can help me further!
    Best regards,
    Monique

  • Aperture 3 accepts my serial number, but won't save it between launches

    I have had Aperture 3 running just fine for months, and yesterday I had my logic board replaced under AppleCare for an unrelated problem. Now, when I launch Aperture, it asks me for my name and serial number. When I enter the info, it accepts it just fine, and Aperture finishes launching and all seems well. BUT, when I quit and relaunch it, it prompts me again for the same information. The default values for first name and last name are LegFName and LegLName, which I thought was odd.
    What can I do to get Aperture to remember my serial number and user information between launches?
    I am running the latest of everything, as I always accept updates whenever they are available. Thanks in advance for any advice.

    Okay, one important clarification from my last post. I said that I tried removing the file: /Library/Application Support/ProApps/ProAppsSystemID, but that's not quite right. From the same directory, I removed a file called "Aperture System ID" and that was not helpful, but apparently I had not tried removing the ProAppsSystemID file. I noticed that right after my last post, and when I removed the ProAppsSystemID file and relaunched Aperture, it came right up and worked perfectly. I checked the About... box, and all the correct information was displayed there. So, the problem was the ProAppsSystemID file, and the solution was to throw it out. I'm not sure what that file is for, or how it got there, but apparently Aperture is perfectly happy to run without it, so I'm happy too.

  • Unable to install adobe flash player it downloads but won't save

    unable to install adobe flash player it downloads but does not appear on my desk top when down

    http://get.adobe.com/reader/enterprise/

  • "Proxy server is refusing connections" error message, fixed with Network Settings but won't save my preferences. Have tried everything!

    I always have to go
    Firefox>Option>Network>Settings>Select Auto-Detect Proxy
    Every time I open firefox.
    I read the "Preferences Not Saved" Help but I don't have a User file in my Containing Folder, so I couldn't change that.
    Deleted my prefs.js files, but when it automatically made a new one it was still stuck on "Manual Proxy Settings" which leads to the "Proxy server is refusing connections" error.
    Any new ideas? Please?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *http://kb.mozillazine.org/Preferences_not_saved
    *https://support.mozilla.org/kb/Preferences+are+not+saved

  • Cannot update CC info--says zip code is wrong but won't save!!

    I just moved and when I went to buy a song in itunes it said my zip code doesn't match the bank info. So I go into my account and update the info with my new address so it matches my bank info and I press done and go back to buy a song and it gives me the same message. When I go back into my account again, my old address is there. This happens NO MATTER WHAT I DO--I tried adding a new CC, tried switching my payment info to Paypal. Whatever I do, it says it takes it, but if I go to buy a song, it goes back to my old account info. WHAT DO I DO??? I have been trying to buy this one song for 30 minutes!~!

    I would try emailing iTunes store customer service:
    http://www.apple.com/support/itunes/store/browser/
    I would try switching your Payment Method to "none" and then signing out of your account completely (Store menu > Sign Out). Then, sign back in and go to enter your CC info again. You might want to contact your financial institution to see if they've switched your billing address over in their systems yet. If they goofed something, it might explain why iTunes is rejecting your info.
    CG

  • Printer connected, printer works, but won't print from Mac

    I'm helping someone with a printer problem, and I have a mystery on my hands.
    The printer is connected (directly), shows up in the printer list, can print a test page, but won't print any document from this computer (it's fine from my laptop).
    It's a Mid-2011 Mini, 2.3Ghz, running 10.7.5. The printer is an Epson WF-2540.
    This is a USB printer, connected directly to their Mac.
    In "Settings", when you select Print/FAX and print a "Test Page" - Success! This is a process that invokes the Epson Driver directly [and bypasses the MAC print queuing mechanism]
    When "Printing" from within any application (firefox, TextEdit, winders...)   The job starts to queue, but errors before engaging the printer.
    R & R the Epson Drivers,  Clear the Printer "stuff" on the Mac, Reinstall drivers from the Epson website, Mac wants to update the "newest" Epson Drivers (kinda' funny when I think about it...).
    Still errors.
    I attached directly to a USB port on my MacBook Pro.  Download drivers, etc..  Works like a champ!
    We have deleted the printer from System Prefs, rebooted, and added it back.
    We have even gone into Terminal and...
    sudo bash
    cd /etc/cups/ppd
    ls
    found EPSON_WF_2540_Series.ppd
    cp * /var/tmp/
    ls /var/tmp/*.ppd
    rm /etc/cups/ppd/*
    Still doesn't work.
    Anybody have any suggestions?

    Hi, it's not clear... did you Rest the Printing system on the Mac?
    10.5/10.6/10.7/10.8 instructions...
    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
        1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
        2.    Choose System Preferences from the Apple menu.
        3.    Choose Print & Fax from the View menu.
        4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

  • Websites won't save in history

    Hi,  I've owned my new computer for roughly 3 or 4 months now but the other day my computer stopped saving history of wesites visited.  Not all, but most.  If I go to a new site, it will save the initial page but won't save any consequetive pages on that site.  It saves documents opened etc.... 
    My computer is a HP Model p6731a
    I'm using windows 7 SP1 IE9.
    I've already checked in Internet Options and the 'Delete Browsing History on Exit' button is UNchecked.
    Any help would be appreciated.
    Sandy
    This question was solved.
    View Solution.

    Hi Sandy,
    The Internet Explorer reset will only affect the settings in your Internet Explorer 9 browser. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Folder order won't save in Outlook 2013

    In my Outlook 2013 desktop client, I accidentally moved the position of my Inbox toward the bottom of my list of email folders. I have since moved my Inbox back to where I originally had it, but every time Outlook restarts, it goes back to where I accidentally
    moved it... once. Apparently Outlook saved the position of my Inbox the
    one time I moved it, but won't save it the many other times I fix it.
    Can someone tell me how to work around or fix this bug?

    Hi,
    Which type of email account are you using? POP3, IMAP or Exchange?
    We may try to use the "Show all folders A to Z" option to reset the Mailbox folder list to its default order. To do this, right-click on the top level of your mailbox and select "Sort subfolders A to Z" and then restart Outlook
    to see the result.
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

Maybe you are looking for