Recover table with no export backup

How can I recover a table from the cold backup without resoring all the database?, the dabase running with noarchive mode

I want to retrieve a static data table from my 4 months old database cold backup. Related with I have some question:
1)Is there any other way to restore the table without restoring the whole database?
2)I know the datafile the table belongs to, is there any way to retrive that datafile alone and linking to the existing production database?
3)If I restore the cold backup to different location in the production machine that have already the same database is running, can I start the database(having the same name) with different instant name(Because I don't want to shutdown the running database in any way, and I don't have test machine to load the database for the export of table)?
Expecting your advice...
Thanks

Similar Messages

How to recover contacts with out a backup on iphone

Updated my phone to the newest version 6.0 and lost all my contacts when it was complete. Tried to restore my contacts from back up on itunes but keep getting a message saying there is not enough space on the iphone therefore took off all the music off the phone and had 3gb free but yet the contacts are not restored.. Help please!

Nice. Not!
Wish there was a way to use the built-in spotlight and siri for third-party notes. It would really be time to move on, as the notes app is beautifully simple, yes, but can you really rely on it?

Help on export sybase iq tables with data and import in another database ?

Help on export Sybase iq 16 tables with data and import into another database ?

Hi Nilesh,
If you have table/index create commands (DDLs), you can create them in Developper and import data using one of methods below
Extract/ Load table
Insert location method : require IQ servers to be entered in interfaces file
Backup/Restore : copy entire database content
If you have not the DDLs, you can generate them using IQ cockpit or SCC.
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01773.1604/doc/html/san1288042631955.html
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01840.1604/doc/html/san1281564927196.html
Regards,
Tayeb.

Export backup failing with ORA-1555snapshot too old: rollback segment ERROR

DB version =8.1.7.4
OS=Solaris =5.10.
I know this is outdated. But still we are supporting this version of database.
We are facing ORA-1555 error daily when we are running the export backup of database. Consistent parameter is set to N .
I needed to know why export uses rollback segments during export operation. even though CONSISTENT parameter is N.
Thanks,
Edited by: ahshivap on Dec 12, 2012 5:19 AM

Hi,
Consistent=y just mean the tables are consistent with each other. Oracle still has to guarantee that each individual table is at least consistent with itself. That's your issue.
Regards,
Harry

Completeness of Prerequisites for Recovering Tables for PDBs from RMAN Backups

Could you verify the completeness of following prerequisities on pag. 441 of the "Backup and Recovery User's Guide 12c Release 1 (12.1) E17630-14"
Prerequisites for Recovering Tables and Table Partitions from RMAN Backups
■ The target database must be in read-write mode.
■ The target database must be in ARCHIVELOG mode.
■ You must have RMAN backups of the tables or table partitions as they existed at the point in time to which you want recover these objects.
■ To recover single table partitions, the COMPATIBLE initialization parameter for target database must be set to 11.1.0 or higher.
According to my test Database administrator workshop: How to recover a table in a pluggable database from a backup
those prerequisities are valid for CDBs or non-CBDs, but if you want to recover tables or table partitions in PDBs a different prerequisite is needed.
Indeed if you have a backup of only the pluggable database including the missing table (the third prerequisite above), but you don't have any backup of the container database the command...
recover table ... of pluggable database ... until scn ... auxiliary destination ...
will fail with the following errors:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 02/12/2014 12:22:18
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
So to recover table in PDBs you must have also the RMAN backups of the CDB or in the opposite way it's not sufficient to have only the backups of the pluggable database, because during the creation of the auxiliary database the SYS, SYSAUX and the UNDO tablespace are required.
Regards,
MarcoV

Hi,
Before dropping a DB we had taken an RMAN backup.I hope you were in mount mode.
Will RMAN automatically recognize the FORMAT of the backup piece and restore ?No it won't.
First you have to restore a controlfile in nomount mode with:
restore controlfile from '/u04/backup/rmanbkp /02mo9fnc_1_1';
and do alter database mount.
Than you have to run "catalog start with '/u04/backup/rmanbkp'; " so the instance now knows where to find the pieces.
Now you can run a restore database command.
Than open the database with resetlogs.
Regards,
Tycho

How can i export the data to excel which has 2 tables with same number of columns & column names?

Hi everyone, again landed up with a problem.
After trying a lot to do it myself, finally decided to post here..
I have created a form in form builder 6i, in which on clicking a button the data gets exported to excel sheet.
It is working fine with a single table. The problem now is that i am unable to do the same with 2 tables.
Because both the tables have same number of columns & column names.
Below are 2 tables with column names:
Table-1 (MONTHLY_PART_1)
Table-2 (MONTHLY_PART_2)
SL_NO
SL_NO
COMP
COMP
DUE_DATE
DUE_DATE
U-1
U-1
U-2
U-2
U-4
U-4
U-20
U-20
U-25
U-25
Since both the tables have same column names, I'm getting the following error :
Error 402 at line 103, column 4
alias required in SELECT list of cursor to avoid duplicate column names.
So How can i export the data to excel which has 2 tables with same number of columns & column names?
Should i paste the code? Should i post this query in 'SQL and PL/SQL' Forum?
Help me with this please.
Thank You.

You'll have to *alias* your columns, not prefix it with the table names:
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
for rData in cData loop
ERROR at line 18:
ORA-06550: line 18, column 3:
PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
ORA-06550: line 18, column 3:
PL/SQL: Statement ignored
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
PL/SQL procedure successfully completed.
cheers

Is it possible to recover my data from iCloud backup without working wifi? I have as many other upgraded my iPhone 4S to iOS 7.0.2 with the result that the Wi-Fi or Bluetooth no longer works. However, i can connect to iTunes via cable but there is wrong v

Is it possible to recover my data from iCloud backup without working wifi? I have as many other upgraded my iPhone 4S to iOS 7.0.2 with the result that the Wi-Fi or Bluetooth no longer works. However, i can connect to iTunes via cable but there is wrong version of backup.

Answer is no.
If you want the iCloud backup you have to have n internet connection, thus WiFi.
The not working WiFi has happened with quite a number of users.
It is not exactly clear what is the cause but there are suggestions to clear it up:
Some people have had success by removing an apostrophe from the iPhone name. If your iPhone is called something like “John’s iPhone” then this might work. Go to Settings > General > About > Name and change it to something with no apostrophe.
Some people have reported success by putting the iPhone into Airplane mode and then going to Settings > General > Reset > Reset Network Settings, but the problem may return.
You could also try going to Settings > Control Center and disable Access on Lock Screen then turn your iPhone off and on again.
Make sure that your router firmware is up to date.
Try backing up your iPhone and then restoring it. Check how to factory reset an iPhone for details.
If nothing is working for you, try contacting Apple or take your iPhone into an Apple Store.
Succes, Lex

Internal table with Import and Export

Hi All,
Hi all
Please let me know the use of <b>Internal table with Import and Export parameters and SET/GET parameters</b>, on what type of cases we can use these? Plese give me the syntax with some examples.
Please give me detailed analysis on the above.
Regards,
Prabhu

Hi Prabhakar,
There are three types of memories.
1. ABAP MEMORY
2. SAP MEMORY
3. EXTERNAL MEMORY.
1.we will use EXPORT/ IMPORT TO/ FROM MEMORY-ID when we want to transfer between ABAP memory
2. we will use GET PARAMETER ID/ SET PARAMETER ID to transfer between SAP MEMORY
3. we will use EXPORT/IMPORT TO/FROM SHARED BUFFER to transfer between external memory.
ABAP MEMORY : we can say that two reports in the same session will be in ABAP MEMORY
SAP MEMORY: TWO DIFFERENT SESSIONS WILL BE IN SAP MEMORY.
for ex: IF WE CALL TWO DIFFERENT TRANSACTIONS SE38, SE11
then they both are in SAP MEMORY.
EXTERNAL MEMORY: TWO different logons will be in EXTERNAL MEMORY.
<b>Syntax</b>
To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETER statements.
To fill one, use:
SET PARAMETER ID <pid> FIELD <f>.
This statement saves the contents of field <f> under the ID <pid> in the SAP memory. The code <pid> can be up to 20 characters long. If there was already a value stored under <pid>, this statement overwrites it. If the ID <pid> does not exist, double-click <pid> in the ABAP Editor to create a new parameter object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID <pid> FIELD <f>.
This statement fills the value stored under the ID <pid> into the variable <f>. If the system does not find a value for <pid> in the SAP memory, it sets SY-SUBRC to 4, otherwise to 0.
To fill the initial screen of a program using SPA/GPA parameters, you normally only need the SET PARAMETER statement.
The relevant fields must each be linked to an SPA/GPA parameter.
On a selection screen, you link fields to parameters using the MEMORY ID addition in the PARAMETERS or SELECT-OPTIONS statement. If you specify an SPA/GPA parameter ID when you declare a parameter or selection option, the corresponding input field is linked to that input field.
On a screen, you link fields to parameters in the Screen Painter. When you define the field attributes of an input field, you can enter the name of an SPA/GPA parameter in the Parameter ID field in the screen attributes. The SET parameter and GET parameter checkboxes allow you to specify whether the field should be filled from the corresponding SPA/GPA parameter in the PBO event, and whether the SPA/GPA parameter should be filled with the value from the screen in the PAI event.
When an input field is linked to an SPA/GPA parameter, it is initialized with the current value of the parameter each time the screen is displayed. This is the reason why fields on screens in the R/3 System often already contain values when you call them more than once.
When you call programs, you can use SPA/GPA parameters with no additional programming overhead if, for example, you need to fill obligatory fields on the initial screen of the called program. The system simply transfers the values from the parameters into the input fields of the called program.
However, you can control the contents of the parameters from your program by using the SET PARAMETER statement before the actual program call. This technique is particularly useful if you want to skip the initial screen of the called program and that screen contains obligatory fields.
Reading Data Objects from Memory
To read data objects from ABAP memory into an ABAP program, use the following statement:
Syntax
IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
Saving Data Objects in Memory
To read data objects from an ABAP program into ABAP memory, use the following statement:
Syntax
EXPORT <f1> [FROM <g 1>] <f 2> [FROM <g 2>] ... TO MEMORY ID <key>.
This statement stores the data objects specified in the list as a cluster in memory. If you do not use the option FROM <f i >, the data object <f i > is saved under its own name. If you use the FROM <g i > option, the data objet <g i > is saved under the name <f i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
Check this link.
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
Thanks,
Susmitha.
Reward points for helpful answers.

Exporting a table with Long datatype col. name

Hello,
I need help exporting a table, One of the column is long datatype.
How can I do this without using Export Util?
Is it possible.
(If someone has a solution then PLEASE Email
me)
URGENT.
Thanks.
Pankaj Patel.

Just wanted to find out, if you already solved this problem. I have a similar issue with long column. I am trying to sql dump a table with long column that will be imported into another database(probably using sql*load), but the spooled file puts the data from the long column in separate lines 80 char long and not on a single line. I have set the long to 64000 and linesize to 32000. Wrap is on too.
null

Export/import table with XMLTYPE data_type and fine_grained policy

Hi friends!
I'm trying to export a table with XMLTYPE and faine-grained policy.
Source: HP-UX - Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
Target: Linux 2.6.18-238.el5 - Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
I do it thru exp/imp old utilities as mention in metalink ID 1318012.1.
One of the things that surprised me after exp/imp is that the number of objects increased:
Objects at Source:
exp \"/ as sysdba\" owner=xml log=xml file=xml.dmp
Type
Number of Objects
TYPE
431
TRIGGER
6
TABLE
17
PROCEDURE
2
LOB
120
INDEX
17
FUNCTION
1
On Target:
imp \"/ as sysdba\" file=xml.dmp fromuser=xml touser=xml log=xml.log
Type
Number of Objects
TYPE
431
TABLE
32
PROCEDURE
2
LOB
429
INDEX
478
FUNCTION
1
Why is this happening? Is it normal?
Other problem that I found is triggers are not imported, why!?!?
Thank you very much for your help!
José

Hi!
The new squema was created empty. If I run the following query:
select '10g', TABLE_NAME,COUNT(*)
from DBA_LOBS@DSN_HP
where OWNER='XML'
group by TABLE_NAME
union
select '11g', table_name,count(*)
from DBA_LOBS
where OWNER='XML'
group by TABLE_NAME
order by 2,1
As a result:
Version
Table_name
Total
10g
ACTION_TABLE
1
11g
ACTION_TABLE
1
10g
Document1767_TAB
14
11g
Document1767_TAB
13
10g
Document1852_TAB
14
11g
Document1852_TAB
13
10g
Document1941_TAB
16
11g
Document1941_TAB
15
10g
Document2016_TAB
14
11g
Document2016_TAB
13
10g
Document2087_TAB
13
11g
Document2087_TAB
12
10g
IBT_XML_RECIBIDOS
1
11g
IBT_XML_RECIBIDOS
1
10g
LINEITEM_TABLE
2
11g
LINEITEM_TABLE
2
10g
PURCHASEORDER
7
11g
PURCHASEORDER
7
10g
PurchaseOrder1145_TAB
9
11g
PurchaseOrder1145_TAB
7
10g
RICARDO
13
10g
RICARDO2
1
11g
RICARDO2
1
10g
RITNTFER
1
11g
RITNTFER
1
10g
RITNTFRE_08
13
11g
SYS_NT3+LEU6vbfGLgQ18DLgrURw==
69
11g
SYS_NT3+LEU6vffGLgQ18DLgrURw==
76
11g
SYS_NT3+LEU6vjfGLgQ18DLgrURw==
63
11g
SYS_NT3+LEU6vpfGLgQ18DLgrURw==
1
11g
SYS_NT3+LEU6vqfGLgQ18DLgrURw==
2
11g
SYS_NT3+LEU6vTfGLgQ18DLgrURw==
65
11g
SYS_NT3+LEU6vXfGLgQ18DLgrURw==
66
10g
TESTCLOB
1
11g
TESTCLOB
1
There are many new tables created...I suppose because the differences between versions...
Any ideas?
Thanks a lot!
José

Using expdp to export a mix of tables with data and tables without data

Hi,
I would like to create a .dmp file using expdp, exporting a set of tables with data and another set without data. Is there a way to do this in a single .dmp file? For example, I want all the tables in a schema with data, but for the fact tables in that schema, I only want the fact table objects, not the data. I thought it might be easier to create two separate .dmp files, one for each scenario, but would be nice to have one .dmp file that satisfies my requirement. Any help is appreciated.
Thanks,
-Rodolfo
Edited by: user6902559 on May 11, 2010 12:05 PM

You could do this with where clauses. Let's say you have 10 tables to export, 5 with data and 5 without data. I would do it like this
tab1_w_data
tab2_w_data
tab3_w_data
tab4_w_data
tab5_w_data
tab1_wo_data
tab2_wo_data
tab3_wo_data
tab4_wo_data
tab5_wo_data
I would make one generic query
query="where rownum = 0"
and I would make 5 specific queries
query=tab1_w_data:"where rownum > 0"
query=tab2_w_data:"where rownum > 0"
query=tab3_w_data:"where rownum > 0"
query=tab4_w_data:"where rownum > 0"
query=tab5_w_data:"where rownum > 0"
The first query will be applied to all tables that don't have their own specific query and it will export no rows, the next 5 will apply to each of the corresponding table.
Dean

Exporting Table with CLOB Columns

Hello All,
I am trying to export table with clob columns with no luck. It errors saying EXP-00011TABLE do not exist.
I can query the table and the owner is same as what i am exporting it from.
Please let me know.

An 8.0.6 client definitely changes things. Other posters have already posted links to information on what versions of exp and imp can be used to move data between versions.
I will just add that if you were using a client to do the export then if the client version is less than the target database version you can upgrade the client or better yet if possilbe use the target database export utility to perform the export.
I will not criticize the existance of an 8.0.6 system as we had a parent company dump a brand new 8.0.3 application on us less than two years ago. We have since been allowed to update the database and pro*c modules to 9.2.0.6.
If the target database is really 8.0.3 then I suggest you consider using dbms_metadata to generate the DDL, if needed, and SQLPlus to extact the data into delimited files that you can then reload via sqlldr. This would allow you to move the data with some potential adjustments for any 10g only features in the code.
HTH -- Mark D Powell --

Recover database until cancel using backup controlfile Fails with ORA-01547

Hi
First of all, I'm sorry for posting in this community as my issue doesn't have any thing to do with Rman, but I couldn't find any more relative Community to post in
our System is Oracle EBS 11i and the OS on the production is AIX 5.2 / and the DR is 5.3 / DB version is 9i
we have our Oracle ERP scheduled using crontab to take a database COLD backup daily using gtar -cvzf .
yesterday I needed to clone the database only, so I used my usual method witch is
1) on the source SQL> alter database backup controlfile to trace as '<dest>/makecntrlfil.sql'
then you can delete the Commented header and change the first command from
"CREATE CONTROLFILE REUSE DATABASE <SOURCE> NORESETLOGS ..."
TO
CREATE CONTROLFILE SET DATABASE <TARGET> RESETLOGS <NO>ARCHIVELOG
2) de-compress the tgz files
3) on the target edit the $ORACLE_HOME/dbs/init<source>.ora, $ORACLE_HOME/environment file
4)run /ORACLE_HOME/appsutils/clone/bin/adcfgclone.prl
5) delete old controlfiles
6) on the database run the script you created on firs t step to create a new control fole
7)recover database until cancel using backup controlfile
8) alter database open resetlogs
add new temp file system
this way I used to do it
but yesterday when trying to execute recover database it didn't work, and gave this error
ORA-00279: change 6450277404 generated at 02/28/2013 02:47:56 needed for thread
1
ORA-00289: suggestion : /ERPDEV/DBASE/devdb/9.2.0/dbs/arch1_188462.dbf
ORA-00280: change 6450277404 for thread 1 is in sequence #188462
Specify log: {<RET>=suggested | filename | AUTO | CANCEL} >> I gave cancel >> so >>
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/ERPDEV/DBASE/SYS/devdata/system01.dbf'
nothing strange in the original alert log file in the time of taking the backup
So can You please tell me what maybe wrong and why it used to work before and now it's not
take in consideration that we are on archive log mode, but not using Rman or the archived Logs for backup and the sequence it needed ( 188462 ) is too old and already deleted on Production.

the output of the sript
Please Do not Forgot to run /usr/bin/runmwm as root Please Do not Forgot to run /usr/bin/runmwm as root Please Do not Forgot to run /usr/bin/runmwm as root Please Do not Forgot to run /usr/bin/runmwm as root ConcMgr will not work ConcMgr will not work ConcMgr will not work #####################################################
172.16.10.10:1.0
access control disabled, clients can connect from any host
You are running adstpall.sh version 115.19
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adapcctl.sh stop script returned:
adapcctl.sh version 115.54
Apache Web Server Listener :httpd ( pid 765998 ) is running.
Stopping Apache Web Server Listener (dedicated HTTP) ...
Apache Web Server Listener (PLSQL) :httpd ( pid 2830390 ) is running.
Stopping Apache Web Server Listener (dedicated PLSQL) ...
adapcctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adalnctl.sh stop script returned:
adalnctl.sh version
Shutting down listener process APPS_ABP.
adalnctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adtcfctl.sh stop script returned:
You are running adtcfctl.sh version 115.14
Shutting down TCF SocketServer for ABP on port -1.
adtcfctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adcmctl.sh stop script returned:
You are running adcmctl.sh version 115.28
Shutting down concurrent managers for ABP ...
Submitted request 7481224 for CONCURRENT FND SHUTDOWN
adcmctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adfrmctl.sh stop script returned:
You are running adfrmctl.sh version 115.37
Stopping forms server for ABP on port 9003.
adfrmctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adrepctl.sh stop script returned:
You are running adrepctl.sh version 115.32
stopping Reports Server for ABP on port 7003.
kill -9 827420
Reports Server for ABP successfully stopped.
adrepctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adfmcctl.sh stop script returned:
You are running adfmcctl.sh version 115.19
Stopping forms load balancing client for ABP.
adfmcctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adfmsctl.sh stop script returned:
You are running adfmsctl.sh version 115.15
Stopping forms metrics server for ABP on port 9203.
adfmsctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/jtffmctl.sh stop script returned:
You are running jtffmctl.sh version 115.16
Shutting down Fulfillment Server for ABP on port 9303 ...
jtffmctl.sh: exiting with status 0
.end std out.
.end err out.
All enabled services on this node are stopped.
Check logfile /ERPABP/APPL/abpcomn/admin/log/ABP_babtain-erp/04010130.log for details
Exiting with status 0
You are running addlnctl.sh version 115.7
Logfile: /ERPABP/DBASE/abpdb/9.2.0/appsutil/log/ABP_babtain-erp/addlnctl.txt
Shutting down listener process ABP ...
addlnctl.sh: exiting with status 0
You are running addbctl.sh version 115.10
Shutting down database ABP ...
SQL*Plus: Release 9.2.0.8.0 - Production on Mon Apr 1 01:36:25 2013
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
Database closed.
Database dismounted.
ORACLE instance shut down.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production With the Partitioning, OLAP and Oracle Data Mining options JServer Release 9.2.0.8.0 - Production
addbctl.sh: exiting with status 0
You are running addbctl.sh version 115.10
Starting the database ABP ...
SQL*Plus: Release 9.2.0.8.0 - Production on Mon Apr 1 01:38:48 2013
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 6829474752 bytes
Fixed Size          742336 bytes
Variable Size          1493172224 bytes
Database Buffers     5324800000 bytes
Redo Buffers          10760192 bytes
Database mounted.
Database opened.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production With the Partitioning, OLAP and Oracle Data Mining options JServer Release 9.2.0.8.0 - Production
addbctl.sh: exiting with status 0
You are running addbctl.sh version 115.10
Shutting down database ABP ...
SQL*Plus: Release 9.2.0.8.0 - Production on Mon Apr 1 01:39:08 2013
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
Database closed.
Database dismounted.
ORACLE instance shut down.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production With the Partitioning, OLAP and Oracle Data Mining options JServer Release 9.2.0.8.0 - Production
addbctl.sh: exiting with status 0
root 2883784 2097278 0 01:39:54 - 0:00 grep abpappl
root 1425530 2097278 1 01:39:54 - 0:00 grep abpora
Taring /ERPABP/DBASE/SYS/abpdata
Mon Apr 1 01:39:54 SAUST 2013
Mon Apr 1 03:00:16 SAUST 2013
Taring /ERPDEV/DBASE/SYS/abpdata
Mon Apr 1 03:00:16 SAUST 2013
Mon Apr 1 03:10:18 SAUST 2013
Taring /ERPABP/DBASE/DATA/abpdata
Mon Apr 1 03:10:18 SAUST 2013
Mon Apr 1 04:51:04 SAUST 2013
Taring /ERPDEV/APPL/DATA/abpdata
Mon Apr 1 04:51:04 SAUST 2013
Mon Apr 1 05:02:58 SAUST 2013
You are running addbctl.sh version 115.10
Starting the database ABP ...
SQL*Plus: Release 9.2.0.8.0 - Production on Mon Apr 1 05:04:46 2013
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 6829474752 bytes
Fixed Size          742336 bytes
Variable Size          1493172224 bytes
Database Buffers     5324800000 bytes
Redo Buffers          10760192 bytes
Database mounted.
Database opened.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production With the Partitioning, OLAP and Oracle Data Mining options JServer Release 9.2.0.8.0 - Production
addbctl.sh: exiting with status 0
You are running addlnctl.sh version 115.7
Logfile: /ERPABP/DBASE/abpdb/9.2.0/appsutil/log/ABP_babtain-erp/addlnctl.txt
Starting listener process ABP ...
addlnctl.sh: exiting with status 0
Please Do not Forgot to run /usr/bin/runmwm as root Please Do not Forgot to run /usr/bin/runmwm as root Please Do not Forgot to run /usr/bin/runmwm as root Please Do not Forgot to run /usr/bin/runmwm as root ConcMgr will not work ConcMgr will not work ConcMgr will not work #####################################################
172.16.10.10:1.0
access control disabled, clients can connect from any host
You are running adstrtal.sh version 115.16
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adapcctl.sh start script returned:
adapcctl.sh version 115.54
Apache Web Server Listener is not running.
Starting Apache Web Server Listener (dedicated HTTP) ...
Apache Web Server Listener (PLSQL) is not running.
Starting Apache Web Server Listener (dedicated PLSQL) ...
adapcctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adalnctl.sh start script returned:
adalnctl.sh version
Checking for FNDFS executable.
Starting listener process APPS_ABP.
adalnctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adtcfctl.sh start script returned:
You are running adtcfctl.sh version 115.14
TCF SocketServer for ABP on port -1 is already started.
adtcfctl.sh: exiting with status 2
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adcmctl.sh start script returned:
You are running adcmctl.sh version 115.28
Starting concurrent manager for ABP ...
Starting ABP_0401@ABP Internal Concurrent Manager Default printer is noprint
adcmctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adfrmctl.sh start script returned:
You are running adfrmctl.sh version 115.37
Starting forms server for ABP on port 9003.
adfrmctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adrepctl.sh start script returned:
You are running adrepctl.sh version 115.32
starting Reports Server for ABP on port 7003.
adrepctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adfmcctl.sh start script returned:
You are running adfmcctl.sh version 115.19
Starting forms load balancing client for ABP.
adfmcctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adfmsctl.sh start script returned:
You are running adfmsctl.sh version 115.15
starting forms metrics server for ABP.
adfmsctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/jtffmctl.sh start script returned:
You are running jtffmctl.sh version 115.16
Validating Fulfillment patch level via /ERPABP/APPL/abpcomn/java Fulfillment patch level validated.
Starting Fulfillment Server for ABP on port 9303 ...
jtffmctl.sh: exiting with status 0
.end std out.
.end err out.
All enabled services for this node are started.
Check logfile /ERPABP/APPL/abpcomn/admin/log/ABP_babtain-erp/04010505.log for details
Exiting with status 0
MWA Telnet Server Release: 1.0.8.4 [December 12th 2002] Mon Apr 1 05:06:01 SAUST 2013
9653.50     /store/abp/data/data_abpdata_010413.tgz
1089.50     /store/abp/data/datadev_abpdata_010413.tgz
0.04     /store/abp/data/mkctrl.sql
13309.38     /store/abp/data/sys_abpdata_010413.tgz
1000.25     /store/abp/data/sysdev_abpdata_010413.tgz
Mon Apr 1 05:06:01 SAUST 2013
#######################################################################################################################

Export a dashboard table with content to pdf

Hey,
I have an dashboard table which I call over an URL in HTML. The content of the html file inserts an SWF file. And now I want to add in this SWF file an export button so the user can export the whole SWF file to an pdf file. Is there an completed solution for this export?
Thanks.
BR,
Christoph

Hi, I mean the table has been time enabled with the procedure DBMS_WM.EnableVersioning and TRUE for the parameter VALID_TIME.
-- Version-enable the table. Specify TRUE for valid time support.
EXECUTE DBMS_WM.EnableVersioning ('employees', 'VIEW_WO_OVERWRITE', FALSE, TRUE);
Following the Workspace Manager Developer's Guide 11g Release 2 (11.2) it could be possible export the table using the Export procedure:
EXECUTE DBMS_WM.Export(table_name => 'employees', staging_table =>'employees_TEMP', workspace => 'LIVE');
but I am getting the error:
ORA-20171: WM error: Export not supported on a table with valid time.
Thanks,
Edited by: ferrando on 24-jul-2010 10:39

Problems with QCM tables in DB export

Hi gurus, I have a problem with an export that I'm performing, the problem is that the R3SETUP is trying to export a QCM table "QCMT066" but this table doesn't exits in the database.
(EXP) ERROR: DbSlExeRead: rc = 107, table "QCMT066"
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
The R3 system is a 4.6C and runs over HP-UX 11 64 bits and Oracle 8.1.7
I read and search SAP notes and inside the SAP forums, but I didn't find anything that could help me.
The transaction SM13 says that --> **** No update records found **** when I execute without client, user and date parameters.
The transaction SE11 says that the table in fact doesn't exits in the database, and if I execute a select sentence (SELECT TABLE_NAME FROM DBA_TABLES WHERE TABLE_NAME LIKE 'QCM%') I can see that there is no table with this name.
In transaction.
The transaction SE14 > Extras> Invalid temp. table show the text " ... List is empty "
So please, Do you know what I could do to solve my problem?.
Thanks and best regards
Edited by: Juan Francisco Estrada Garcia on Sep 3, 2010 11:02 AM

Thank you, that is just what I did.
I found this [tread|r3load export error ORA-00942 for table QCMBTXBLOK; where the people talk about .TKS files, but the version that I'm trying to migrate is too old, and the R3LOAD doesn't use TKS files, so I edited every file(.EXT, .STR, .TOC) that contains references to QCM* tables. I deleted every line related with this kind of tables, and finally everything work and the export ended successfully.
Thanks

Recover table with no export backup

Similar Messages

Maybe you are looking for