Recovery of VHD file from tape immediately gives null error, ID 1001, and job fails.

I am attempting to recover a VHD from tape. When I finish the recovery wizard and it starts to create the job, I get an immediate popup error with an ID: 1001 and a "More Information" link that goes to a "page not found" on technet.
There is no actual errror message or other info in the dialog box. When I click ok, the dialog and recovery wizard disappear, and no job seems to have been created.
I've seen a couple of other posts about this, but didn't find any solutions. I did run a tape verification against the recovery point in question, and it completed. (I don't see where it says passed/failed, just completed. I assume the
job would have failed if it found a problem?)
I've also tried a couple of other recovery points, on different tapes, but am getting the same results.
Any idea what is going wrong?

Hi,
Can you provide DPM version and update rollup version. Are there any events from MSDPM after the error, if so, can you supply the event details ?
As a workaround, you can restore the VHD by going to Management>Tape Library>Right Click on the Tape>select backup set for the data source containing the VHD and then click on the COPY button. That will restore to
a network location and you can then copy it to the hyper-v server and replace the VHD manually.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

How to recovery the deleted files from hard disk like images,media files

How to recovery the deleted files from hard disk like images, media files by using c#.net

It's important to define deleted and recovery. You can recover file from the recycle bin using the Win API. Here's an
example in C/C++. You need to
pinvoke SHFileOperation.

Import .VHD Files from Virtual Iron or Xen Server

Hi,
I have some .vhd Files from the XEN Based Virtual Iron Server here. I copied them to the OVM Server and try to start but the only thing i got was a "Booting from Harddisk" at the console. Do i have to convert them. Do you know how?
Thank you.
Regards

Okay, seems that one of the .vhd was broken. i did a new export in VI and import in OVM, now it works.

How to copy the backup files from TAPE to Local disc

Hi Gurs,
i want to make as replica trrough PRD offline backup , on new server, while database installing i will take the option systemcopy /backup/restore , so for that how installation master can recognise the tape from tape device, so that now i wanted to copy the backup files from Tape to local disk so that it was already mounted ,i can show the path of backup files.
the OS is Susi 9
Oracle 9i
ECC 5.0
please any one can help me
cheers

What do you use to backup the files to disk? cpio? dd?
Markus

WHAT IF I DELETE THE SYSTEM06.DBF FILE FROM DATABASE /U01/DB/apps_ sid / system06.dbf and how to recover it in apps

WHAT IF I DELETE THE SYSTEM06.DBF FILE FROM DATABASE /U01/DB/apps_<sid>/ system06.dbf and how to recover it in apps

Hi,
First of all you must Open a ticket with oracle Support and explore the options
You can use this note to fix it:
RECOVERING FROM A LOST DATAFILE IN A UNDO TABLESPACE [ID 1013221.6]
If you is Unable to Drop Undo tablespace Since Undo Segment is in Needs Recovery
You can Upload the following trace file while opening the ticket
SQL>Alter session set tracefile_identifier='corrupt';
SQL>Alter system dump undo header "<new of undo segment in recover status>";
Go to udump
ls -lrt *corrupt*
Upload this trace file
Also upload the alert log fileRegards,
Levi Pereira
Edited by: Levi Pereira on Nov 29, 2011 1:58 PM

How to upload words, exel, PDF file from the pc via itune to the iPad, and where will the uploaded file be saved? In the apps?

How to upload words, exel, PDF file from the pc via itune to the iPad, and where will the uploaded file be saved? In the apps?

You will need an app (or apps) on your iPad that is capable of reading the documents, as they will be saved with the app - if you don't have such an app then there is nothing to transfer them to or to read/access them.
One method of transferring them is toconnect your iPad to your computer's iTunes, select it's app tab, and then scroll to the bottom of it - you should the apps That you've got that are capable of file-sharing (if you've got any). Selecting/high-lighting one of them should then allow you to add files to it via the box to the right of it.
An alternative way to get the documents onto your iPad is if the app that you want to transfer them to has a wifi setting, which will then allow you to transfer the documents wirelessly. You can also send the documents to yourself as attachments and then use Mail's 'open in' facility to copy them into your chosen app.
Edit : more info on file sharing from the manual :
File Sharing lets you transfer files between iPad and your computer. You can share files created with a compatible app and saved in a supported format.
Apps that support file sharing appear in the File Sharing Apps list in iTunes. For each app, the Files list shows the documents that are on iPad. See the app’s documentation for how it shares files; not all apps support this feature.
Connect iPad to your computer.
In iTunes, select iPad in the Devices list, then click Apps at the top of the screen.
In the File Sharing section, select an app from the list on the left.
On the right, select the file you want to transfer, then click “Save to” and choose a destination on your computer.
Transfer a file from your computer to iPad:
Connect iPad to your computer.
In iTunes, select iPad in the Devices list, then click Apps at the top of the screen.
In the File Sharing section, click Add.
Select a file, then click Choose (Mac) or OK (PC).
The file is transferred to your device and can be opened using an app that supports that file type. To transfer more than one file, select each additional file.
Delete a file from iPad: Select the file in the Files list, then tap Delete.
Message was edited by: King_Penguin

I have a seagate 1tb hard drive and a 16gb memory stick, how do i transfer avi files from one to another as the click drag and drop wont work, please help?

i have a seagate 1tb hard drive and a 16gb memory stick, how do i transfer avi files from one to another as the click drag and drop wont work, please help?

Greetings,
What happens when you drag it?
Make sure the drive you are moving the files to has enough available space to receive the file:
Click on the movie file and go to File > Get Info and note the "size"
Check the drive to which you are moving the file to make sure it has enough available space: https://idisk.me.com/madisonfile-Public/web/finder-drive-available-space-and-for mat.html
Also note the format of the drive you are copying too. If it is not Mac OS Extended or FAT (not recommended unless you are taking it to a windows computer) then that may be the issue.
Hope that helps.

I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then onl

I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then only delete a small amount at one time?

See
Deleting backups via the Finder on Lion 10.7.x or later:
http://pondini.org/TM/12.html
Hold option (alt) while emptying the Trash.
See also
http://pondini.org/TM/E6.html
Message was edited by: WZZZ

Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?

Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?

emilypdunne wrote:
Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?
Is what you're saying that you only want backups in TM of the state of your Mac from January 2015 to the current date and nothing before then? I'd think the simplest solution would just be to delete in TM all the backups prior to 1/15 and then let TM do its thing. The ultimate source for all things Time Machine is here. On this page, note the comment that "Time Machine will never delete the backup copy of anything that was on the disk being backed-up at the time of any remaining backup" which I understand to mean that if you delete all the backups in the TM file prior to 1/15, any file that wasn't present on your Mac as of 1/15 will no longer be represented in the TM file. Note that the second link also has instructions for how to delete TM files.
If you were trying to accomplish something else, then as Emily Litella (Gilda Radner in SNL) used to say, "never mind."

I can not open raw image files from my Cannon 5d mark iii with cs6 and my cs6 in mac

I can not open raw image files from my Cannon 5d mark iii with cs6 and my cs6 in mac

The Mk III requires an updated version of Camera RAw, so run Help --> Updates and install it.
Mylenium

I opened RAW files from D800 accidentally in CS3 (on old laptop) and are unable to open them now CS6. How to open them?

I opened RAW files from D800 accidentally in CS3 (on old laptop) and are unable to open them now CS6. How to open them?

Sorry, yes this is Microsoft Excel. The Microsoft XP has Excel files denoted as xl, the later versions of Microsoft Excel are denoted as xls files. The later verions of Microsoft Excel open the xl files OK, does Excel for Mac not able to do this?

Do you know if it's possible to generate Word 2003 files from RoboHelp if we're using Office 2007 and RoboHelp 2007?

Do you know if it's possible to generate Word 2003 files from
RoboHelp if we're using Office 2007 and RoboHelp 2007? We are
thinking of upgrading, but have customers that would still require
Word 2003 formats because they won't have 2007 installed.
Thanks!

Hi NewtoRobohelp
Unfortunately I don't have Office 2007 in front of me to test
with. But I'm thinking that as long as Office 2007 still produces
the same formats as 2003, you could do it this way.
From RoboHelp 7 and using Office 2007, generate Printed
ouptut. Open said printed output in Office 2007 and perform a Save
As. Save the document as a RTF (Rich Text Format) document.
RTF is more universal. So I'm thinking this may be a possible
way around it. There is also the possibility that Word 2007 offers
up an ability when saving a file to save in an older format.
Cheers... Rick

The error message I get on my PC is "The ITunes library file cannot be saved" An unknown error occurred (-50)and my music library has disappeared. I recently tried to copy a CD to my library - it appeared to copy ok but then did not appear in my music li

The error message I get on my PC is "The ITunes library file cannot be saved" An unknown error occurred (-50)and my music library has disappeared. I recently tried to copy a CD to my library - it appeared to copy ok but then did not appear in my music library. The library does not show up even when my iPad is connected to my PC. My entire library is now held on my iPad and I wish to have it in iTunes so I can sync my iPhone to it as well. Help?

Don't know what changed today but it downloaded and installed on the shuffle. So far so good.

My elements will quit when I tried applying the comic sketch filter on any photo, it gives the error 615, 625, and sometimes some other errors. What can I do?

my elements will quit when I tried applying the comic sketch filter on any photo, it gives the error 615, 625, and sometimes some other errors. What can I do?

Is there a way to reinstall the comic sketch filter? Other filters appear to be ok

Recover a VHD file from a formatted volume

Apologies if this is not the right forum.
So I was preparing a new server to host virtual machines. This is a Dell PE r710, Dual quad-core Xeon processors, 48 GB RAM, 2x 72 GB SAS drives. The server has Hyper-V Server 2008 R2 installed. iSCSI volumes hosted in a Dell EqualLogic SAN will host the
actual virtual machines. We have 5 of these with similar setups, 3 of which are setup in a cluster. We have 2 set aside for additional projects. These will not be clustered as they will be hosting Lync virtual machines. Anyway we have 1 server setup and working
with 2 VM's. The 2nd server will initially host 2 additional VM's. My goal was to format the iSCSI volume on the 2nd server and prepare it to host VMs. Except I accidentally logged into the 1st server (it's one of those days - I was interrupted as I was typing
in the server name into Remote Desktop and it auto-populated the first server instead of the 2nd) and begin formatting the volume. Needless to say Lync stopped working and the VMs crashed. I immediately recognized my mistake and stopped
the format but obviously it was too late.
I was hoping I could recover the data on that volume. We have a trial of this software called GetDataBack NTFS edition. It can recognize the volume ok and it can scan it and see files. Unfortunately it does not see actual VHD files. Instead what
happens is that it sees the VHD files as separate volumes/partitions/etc and recovers the data within the VHD files. Not sure if it should do that, waiting on a response from Runtime. Kind of cool in a way if we ever needed to recover data within a VHD file.
Anyway, does anyone know of software that can recover data from a volume but not scan the contents of the vhd file and include that data in the recovery? By this I mean I want to recover the actual VHD files, not the data within. Perhaps Virtual
Machine Manager can do something? We do have it installed and manage our VM's with it. It would save us the trouble of re-deploying Lync. Apparently there's a lot of ADSI edits needed to undo the changes Lync did to AD/ Even migrating users back requires some
ADSI edits. Trying to find those online someplace just in case.
We did not have backups yet of these 2 VMS as we just recently got them setup and have moved a few users over (some of us from IT). We still had some configuration/tweaking/adjustments to make before migrating the remainder of our OCS users. I know, I know,
backup backup backup. The SAN we have can even do snapshots of iSCSI volumes but we didn't even think of enabling it yet.
Regardless in what happens with the VM's, I enabled Windows Server Backup and will immediately setup nightly backups once the VM's are operational again. I will also have our SAN admin enable snapshots, and just for laughs I will also enable snapshots on
the individual VM's. We're also currently testing out Data Protection Manager. Kind of wish we already had it implemented....sigh...
Thanks,
Banging my head against a board with a nail in it...

Hi,
There are lots of data recovery tools you can use to recovery the data. You can also try to call some professional data recovery company to check whether
they can recover the data for you. Thanks for your understanding.
Best Regards,
Vincent Hu

Recovery of VHD file from tape immediately gives null error, ID 1001, and job fails.

Similar Messages

Maybe you are looking for