Recteaing database in Oracle Application

Dear all
I have two on prod and dev .there is any way to refresh database without recloning again .
like using rman ?>>>>
Best Regrards,
Mohammed

You can use rman hot backups in conjunction with rapid clone, but you cannot just use rman, unless you can guarantee there were no applications changes like patches since the last refresh.
Cloning Oracle Applications Release 11i with Rapid Clone
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230672.1
FAQ: Cloning Oracle Applications Release 11i
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=216664.1
Troubleshooting RapidClone issues with Oracle Applications 11i
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=364565.1

Similar Messages

Install Oracle Application server 10g and Oracle database 10g on same box

Hi Experts!
i need to install Oracle database and oracle application server on the same machine(windows xp).
when i install both of them and reboot the machine either oracle database or oracle application server fails...
i suspect that the problem might be due to two - ORACLE_HOME
let me know how i can resolve this issue.
Note: Oracle DB and OAS OPMN process run as a windows service.
after restart opmn fails
Many thanks in advance
-Raghav

Jacco, in spite of your ace :-) this time I cannot
completely agree with you:
I hope sincerely that this ace thing doesn't "scare" anyone from challengeing me. I can't know everything, even though this ace sign suggests it.
- things like ORACLE_HOME are also set in the system
environment settings. This may lead to conflicts;It does, therefore you should set them with the service (I figured the installer of Oracle would actually do that for you, but I hardly ever work with Windows)
- the database and AS have different versions of the
RSFs. The most recent AS version is using 10.1.0.5
RSFs, where the database uses 10.2.x. This leads to
conflicts.
- Port conflicts are common in the ONS area, however
this should not prevent startup and should not be
very likely at this point since all products use the
same inventory and it should have been checked for
ports that are in use.ons port conflics shouldn't precent startup, but other port conflicts can.
>
With the total of our posts the problem should be
resolved anyway ;)Exactly, as long as the reader has the proper knowledge to understand them ;)
(this feels like a post just to make sure that you know I respect your opinions and advices)

Oracle Application Server Shutdown

I am having a few sites that use Oracle Database and Oracle Application Server.Both are on two dedicated machines.
Database Server Particulars:
OS : Spark Box with Solaris 2.6
Database : Oracle 8.1.5
Application Server :
OS : Spark Box Solaris 2.7
Application Server : Oracle Application Server 4.1.8
The sites that uses these server once in a while in a random fashion becomes unvailable.When we check the status of the database it is fine,but the server with the OAS would be in shuting down.
I am not used to OAS and would like to solve the issue.Is there a way that i can troubleshoot this issue.
Any help would be warmly welcomed.
Thanks and Regards
Michael
DBA

check if ur ORACLE_SID environment variable is set
echo $ORACLE_SID
also check if ur db is up and running..
ps -ef |grep smon
Rgds...R

Oracle Applications 11i Load Balancing does not work with RAC one Node

Hi all,
Could you help me to resolve this issue.
Architecture environment is :
- One APPS tier node
- Two nodes Oracle Database Appliance (Primary node 1 holds INSTANCE_1 et Secondary node is configurured to holds INSTANCE_2), i.e RAC one Node.
- The primary node have instance_name SIGM_1 and the secondary node have instance_name SIGM_2, but in RAC one node, the secondary instance is not alive.
We convert our EBS 11i environment to RAC following note ID Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 11i [ID 823586.1].
When testing Database failover, Oracle Applications 11i load balancing does not work anymore.
The root cause is that, when the primary node of the Rac one node is down, the INSTANCE_NAME_1 is automaically relocating to the surviving node,.
During test failover, we imagine that when the primary node goes down, the secondary node start or relocate database with instance_name SIGM_2, and in that case the Oracle Applications load balancing works.
Currently, when the primary node goes down, the instance_name SIGM_1 is relocated on the secondary node, which cause failure of Oracle Applications Load Balancing.
Thank you for your advice.
Moussa

This is something I observed a long time ago for Safari (ie: around version 1). I'm not sure this is Safari, per se, but OpenSSL that is responsible for the behavior. I'm pretty sure Chrome does this and I've seen some Linux browsers do it.
What I have done at the last two companies I've worked for is recommend that our clients do not use SSL SessionID as the way of tracking sticky sessions on web servers, but instead using IP address. This works in nearly all cases and has few downsides. The other solution is to use some sort of session sharing on your web servers to mitigate the issue (which also means that your web servers aren't a point of failure for your users' sessions). (One of the products I supported had no session information stored on the web servers, so we could safely round-robin requests, the other product could be implemented with a Session State Server... but in most cases we just used IP address to load balance with). The other solution is to configure your load balancer to terminate the SSL tunnel. You get some other benefits from this, such as allowing your load balancer to reduce the number of actual connections to the web servers. I've seen many devices setup this way.
One thing to consider through this is that - due to the way internet standards work - this really can't be termed a bug on anyone's part. There is no guarantee in the SSL/TLS standards that a client will return the same SSL Session ID for each request and there is not requirement that subsequent requests will even use the same tunnel. Remember, HTTP is a stateless protocol. Each request is considered a new request by the web server and everything else is just trickery to try and get it to work the way you want. You can be annoyed at Safari's behavior, but it's been this way for over 5 years by my count, so I don't expect it to change.

Oracle application related target not show in grid control 11g (11.1.0)

hi all
i insall grid contrlol on r12(12.1.1) and it work very fine detect all target r12 database plus oracle application server all target...
but my problem is, when i connect it to another system r12(12.1.3) by agent silent installation...it detect oracle r12 database but not detect any target related to oracle application server such as oracle ebusiness suit,http server or any target related to application server...
os linux 5.4.
acutally i want to configure plug in 4.0
i follow metalink doc 1224313.1( i apply all the patch that are mentained in this document..)
plz plz plz help me or refer me any doc any blog or any thig by which i can detect oracle application target in grid control..
grid control 11g(11.1.0)
os - linux 5.4
r12 - 12.1.3
thanks & regards
pritesh ranjan

ya i have installed all the patch that maintain in the plug-in 4.0 doc (1224313.1)
below are the details of the log file and agent of the host server and remote server............
This is the log file details of my remote machine which application server is not detected:-
[orainst1@erpdemo log]$ cat emagent.log
2013-02-21 11:46:56,936 Thread-3043985088 Starting Agent 11.1.0.1.0 from /data/PRODINST/agent111g/agent11g (00701)
2013-02-21 11:47:33,240 Thread-3043985088 EMAgent started successfully (00702)
[orainst1@erpdemo log]$
r::snmhsutl.c:executable nmhs should have root suid enabled
storage_report_metrics.pl: Thu Feb 21 11:48:04 2013: WARN: STORAGE_REPORTS:error::snmhsutl.c:executable nmhs should have root suid enabled
storage_report_metrics.pl: Thu Feb 21 11:48:04 2013: WARN: STORAGE_REPORTS:error::snmhsutl.c:executable nmhs should have root suid enabled
storage_report_metrics.pl: Thu Feb 21 11:48:04 2013: WARN: STORAGE_REPORTS:error::snmhsutl.c:executable nmhs should have root suid enabled
storage_report_metrics.pl: Thu Feb 21 11:48:04 2013: WARN: STORAGE_REPORTS:error::snmhsutl.c:executable nmhs should have root suid enabled
storage_report_metrics.pl: Thu Feb 21 11:48:04 2013: WARN: STORAGE_REPORTS:error::snmhsutl.c:executable nmhs should have root suid enabled
storage_report_metrics.pl: Thu Feb 21 11:48:04 2013: WARN: STORAGE_REPORTS:error::snmhsutl.c:executable nmhs should have root suid enabled
storage_report_metrics.pl: Thu Feb 21 11:48:04 2013: WARN: STORAGE_REPORTS:error::snmhsutl.c:executable nmhs should have root suid enabled
storage_report_metrics.pl: Thu Feb 21 11:48:04 2013: WARN: STORAGE_REPORTS:error::snmhsutl.c:executable nmhs should have root suid enabled
storage_report_metrics.pl: Thu Feb 21 11:48:04 2013: WARN: STORAGE_REPORTS:error::snmhsutl.c:executable nmhs should have root suid enabled
storage_report_metrics.pl: Thu Feb 21 11:48:04 2013: WARN: STORAGE_REPORTS:error::snmhsutl.c:executable nmhs should have root suid enabled
storage_report_metrics.pl: Thu Feb 21 11:48:04 2013: WARN: STORAGE_REPORTS:error::snmhsutl.c:executable nmhs should have root suid enabled
[orainst1@erpdemo log]$
[orainst1@erpdemo log]$ cat emagent.nohup
--- Standalone agent
----- Thu Feb 21 11:46:56 2013::Agent Launched with PID 24198 at time Thu Feb 21 11:46:56 2013 -----
----- Thu Feb 21 11:46:56 2013::Time elapsed between Launch of Watchdog process and execing EMAgent is 0 secs -----
(pid=24198): starting emagent version 11.1.0.1.0
(pid=24198): emagent started successfully
URLTiming: Using SunX509
[orainst1@erpdemo log]$
Emagent.trc
: nmehl_read_sock timed out, rsf = -5, setting read timeout flag2013-02-21 12:01:39,302 Thread-3028446096 WARN ssl.io: fd=32: nmehlssl_read, nzos_Read error = 28862 readTimed Out = 1
2013-02-21 12:01:39,302 Thread-3028446096 WARN http: <nmehl.c>:<nmehl_readline>: nmehlssl_read() timed out
2013-02-21 12:01:39,302 Thread-3028446096 ERROR pingManager: nmepm_pingReposURL: Error in request response. code = 400. text =
2013-02-21 12:02:09,368 Thread-3028446096 WARN ssl: <nmehlssl.c:nmehlssl_readcb>: nmehl_read_sock timed out, rsf = -5, setting read timeout flag
2013-02-21 12:02:09,368 Thread-3028446096 WARN ssl.io: fd=32: nmehlssl_read, nzos_Read error = 28862 readTimed Out = 1
2013-02-21 12:02:09,368 Thread-3028446096 WARN http: <nmehl.c>:<nmehl_readline>: nmehlssl_read() timed out
2013-02-21 12:02:09,368 Thread-3028446096 ERROR pingManager: nmepm_pingReposURL: Error in request response. code = 400. text =
2013-02-21 12:07:35,620 Thread-3032005520 WARN ssl: <nmehlssl.c:nmehlssl_readcb>: nmehl_read_sock timed out, rsf = -5, setting read timeout flag
2013-02-21 12:07:35,620 Thread-3032005520 WARN ssl.io: fd=35: nmehlssl_read, nzos_Read error = 28862 readTimed Out = 1
2013-02-21 12:07:35,620 Thread-3032005520 WARN http: <nmehl.c>:<nmehl_readline>: nmehlssl_read() timed out
2013-02-21 12:07:35,620 Thread-3032005520 ERROR command: nmejcn: error receiving response headers from https://pritesh.txis.com:4900/em/upload
[orainst1@erpdemo log]$
[orainst1@erpdemo log]$ cat emdctl.trc
2013-02-21 11:46:56,495 Thread-3043628736 WARN http: nmehl_connect_internal: connect failed to (erpdemo.txis.com:3872): Connection refused (error = 111)
2013-02-21 11:46:56,495 Thread-3043628736 ERROR main: nmectla_agentctl: Error connecting to https://erpdemo.txis.com:3872/emd/main/. Returning status code 1
[orainst1@erpdemo log]$
[orainst1@erpdemo log]$ cat emagentfetchlet.trc
[orainst1@erpdemo log]$ cat emagentfetchlet.trc
2013-02-21 11:47:37,597 [main] WARN track.OracleInventory collectInventory.937 - ECM: Oracle Home agent11g1 at location /data/PRODINST/agent11g/agent11g specified in inventory /data/PRODINST/oraInventory does not exist.
2013-02-21 11:47:38,452 [main] WARN track.OracleInventory collectInventory.937 - ECM: Oracle Home agent11g3 at location /data/PRODINST/pritesh_agent/agent11g specified in inventory /data/PRODINST/oraInventory does not exist.
2013-02-21 11:47:38,535 [main] WARN track.OracleInventory mineHomeInventory.2320 - ECM: Oracle Home : Independent Products at N/A is not readable, please check permissions ..
[orainst1@erpdemo log]$
[orainst1@erpdemo log]$ cat emagent.nohup.lr
[orainst1@erpdemo log]$ cat emagent.nohup.lr
--- Standalone agent
[orainst1@erpdemo log]$#######################################
[orainst1@erpdemo log]$ cat emctl.log
[orainst1@erpdemo log]$ cat emctl.log
24156 :: Thu Feb 21 11:46:56 2013::AgentLifeCycle.pm: Processing start agent
24156 :: Thu Feb 21 11:46:56 2013::AgentLifeCycle.pm: EMHOME is /data/PRODINST/agent111g/agent11g
24156 :: Thu Feb 21 11:46:56 2013::AgentLifeCycle.pm: service name is
24156 :: Thu Feb 21 11:46:56 2013::EM_SECURE_HOSTNME: erpdemo.txis.com
24156 :: Thu Feb 21 11:46:56 2013::EM_SECURE_PORT: 3872
24156 :: Thu Feb 21 11:46:56 2013::EM_LISTEN_ON_ALL_NICS: TRUE
24156 :: Thu Feb 21 11:46:56 2013::AgentLifeCycle.pm:status agent returned with retCode=1
24156 :: Thu Feb 21 11:47:34 2013::AgentLifeCycle.pm: Exited loop with retCode=3
25957 :: Thu Feb 21 12:12:33 2013::AgentLifeCycle.pm: Processing status agent
25957 :: Thu Feb 21 12:12:33 2013::AgentStatus.pm:Processing status agent
25957 :: Thu Feb 21 12:12:33 2013::AgentStatus.pm:emdctl status returned 3
[orainst1@erpdemo log]$
[orainst1@erpdemo bin]$ ./emctl status agent
Oracle Enterprise Manager 11g Release 1 Grid Control 11.1.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Agent Version : 11.1.0.1.0
OMS Version : 11.1.0.1.0
Protocol Version : 11.1.0.0.0
Agent Home : /data/PRODINST/agent111g/agent11g
Agent binaries : /data/PRODINST/agent111g/agent11g
Agent Process ID : 24198
Parent Process ID : 24178
Agent URL : https://erpdemo.txis.com:3872/emd/main/
Repository URL : https://pritesh.txis.com:4900/em/upload
Started at : 2013-02-21 11:46:56
Started by user : orainst1
Last Reload : 2013-02-21 11:46:56
Last successful upload : 2013-02-21 17:33:40
Total Megabytes of XML files uploaded so far : 36.47
Number of XML files pending upload : 0
Size of XML files pending upload(MB) : 0.00
Available disk space on upload filesystem : 15.60%
Last successful heartbeat to OMS : 2013-02-21 17:41:09
Agent is Running and Ready
[orainst1@erpdemo bin]$
[orainst1@erpdemo bin]$ ./emctl upload agent
Oracle Enterprise Manager 11g Release 1 Grid Control 11.1.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
EMD upload completed successfully
[orainst1@erpdemo bin]$
SQL> select release_name from apps.fnd_product_groups;
RELEASE_NAME
12.1.3
The below details is from on the machine where the grid control ,weblogic server and oms are installed and have not create any type of problem:-
Oms details on host machine
[oracle@pritesh bin]$ ./emctl status oms -details
Oracle Enterprise Manager 11g Release 1 Grid Control
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Enter Enterprise Manager Root (SYSMAN) Password :
Console Server Host : pritesh.txis.com
HTTP Console Port : 7788
HTTPS Console Port : 7799
HTTP Upload Port : 4889
HTTPS Upload Port : 4900
OMS is not configured with SLB or virtual hostname
Agent Upload is unlocked.
OMS Console is unlocked.
Active CA ID: 1
[oracle@pritesh bin]$
[oracle@pritesh bin]$ ./emctl status agent
Oracle Enterprise Manager 11g Release 1 Grid Control 11.1.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Agent Version : 11.1.0.1.0
OMS Version : 11.1.0.1.0
Protocol Version : 11.1.0.0.0
Agent Home : /home/oracle/Oracle/Middleware/agent11g
Agent binaries : /home/oracle/Oracle/Middleware/agent11g
Agent Process ID : 3795
Parent Process ID : 3775
Agent URL : https://pritesh.txis.com:3872/emd/main/
Repository URL : https://pritesh.txis.com:4900/em/upload
Started at : 2013-02-21 10:00:56
Started by user : oracle
Last Reload : 2013-02-21 10:17:45
Last successful upload : 2013-02-21 16:46:01
Total Megabytes of XML files uploaded so far : 42.29
Number of XML files pending upload : 0
Size of XML files pending upload(MB) : 0.00
Available disk space on upload filesystem : 23.91%
Last successful heartbeat to OMS : 2013-02-21 16:46:53
Agent is Running and Ready
[oracle@pritesh bin]$
[oracle@pritesh bin]$ ./emctl upload agent
Oracle Enterprise Manager 11g Release 1 Grid Control 11.1.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
EMD upload completed successfully
[oracle@pritesh bin]$
SQL> select release_name from apps.fnd_product_groups;
RELEASE_NAME
12.1.1
SQL>
thanks & regards
pritesh rnajan

No suitable driver for mysql in oracle application server portal 10g

Hi all
i want to run my portlet with mysql4.1 database from "oracle application server portal 10g".
i did all configuration in data source and also i kept mysql connector jar file into all oraclehome/jdbc/jlib folder.
Mysql
General
Name :: helloMysql(jndiname)
Description :: helloMysql
Data Source Class :: com.mysql.jdbc.jdbc2.optional.MysqlXADataSource
JDBC URL :: jdbc:mysql://localhost:3306/database?relaxAutoCommit=true
JDBC Driver :: com.mysql.jdbc.driver
Datasource Username and Password
Username------------>(user name)
password-------------->(password)
JNDI Locations
Location== jdbc/helloMysql
jdbc/blogOracle== jdbc/XA/helloMysql
EJB Location == jdbc/XA/helloMysql
Connection Attributes
Connection Retry Interval (seconds)====1
Max Connection Attempts===empty
Cached Connection Inactivity Timeout (seconds)===30
remaing all are empty
when i run the portlet, then i am getting "No suitable driver" in my portal page.
i want check server console or server log for oracle application server portal.
please help ,where to find server log?
Any suggestions or help from your side.
Thanks in advance.
Raju

I think you're trying to connect to a database in a diferent host than the Web Server.
This is possible in applcations, but not in applets, who only can open TCP connections to the same machine who served the page.
To do that, yo should use a Data Gateway to establish the connections (IDSServer, and so on). I think that installing Oracle's Connection Manager in the same machine than the Web, it would run.
null

Embedded License Resource Kit for Oracle Application Server 10g

Hi,
I work for a company and we are an Oracle partner. We would like to deliver our flagship product with Oracle Database and Application Server (10g) embedded.
According to an Oracle press release back in october 2003, Embedded License Resource Kits for Oracle Database and Oracle Application Server are available through the Oracle Partner Network (http://www.oracle.com/corporate/press/2484668.html)
I found a kit for Oracle Database through OPN but was not able to find one for Oracle Application Server 10g.
Does such a kit still exist for Oracle Application Server, and if yes where can I download it?

Go to MyOracleSupport/Metalink.
Click patches and Updates on the top left bar. Download the patches.
Each patch comes with its readme.txt. Do read it. It shows you how to install the patch. it also gives syntax with example for various scenarios of how to install it, or remove a patch either. In most of the patches, Installing a patch again does not hurt your system.
It's a good practice to keep db inventory clean before attempting to install the patch because otherwise the patch installation will fail.
hope that helps!
AMN

How to connect oracle application server portal to MS access DataBase

Hello,
I am facing one problem here.
Our client is having their database in MS access and they want to implement the oracle application server portal for their organization then how to connect the MS access DB to oracle Application server portal

There is a worked example of how to connect oracle to an Excel spreadsheet, which is easily modifyable to read from an Access Database.
http://asktom.oracle.com/pls/ask/f?p=4950:61:::::P61_ID:4406708207206#18830681837358
I had some concurrency problems - only one person could use the link at any one time, so I used it to load the data into oracle tables.
Tak

Oracle Database XE to Application Express 3.0.1

Hello,
For some reason, I am really lost when it comes to upgrading from Oracle Database XE to Application Express 3.0.1. in a PC Windows 32-bit environment. In the following link: http://www.oracle.com/technology/products/database/application_express/html/3.0.1_and_xe.html
it states to follow step 3.2 of the following link: http://download.oracle.com/docs/cd/B32472_01/doc/install.300/b32468/install.htm#CHDHIJGE.
It tells me to run apexins.sql. I can't find this script. Am I missing something? I need very detailed step-by-step instructions. Any and all help is welcome. I have been fighting with this for two days, and I am not getting anywhere. Thanks in advance!
Sharon

Hi, try with this>
Apex 3.01 Install
gordan
http://gordanmilojevic.blogspot.com/

Unable to connect Oracle Application Database using Discoverer Admin 10g

Hi,
I have installed oracle Admin 10g on my machine and trying to connect oracle application database but every time i am getting error like "Unable to connect to: user@hostname Failed to connect to database Unable to connect to Oracle Application Database. Invalid username/password".
Installed BI Discoverer Admin 10.1.2.1
Discoverer Admin Client 10.1.2.48.18
Database 9i
I have done following steps:
1. Selected radio button for Connect to Application EUL's.
2.Gateway User ID (GWYUID)/Password :APPLSYSPUB/PUB
3.FNDNAME:APPS
I able to connect discoverer plus.
Thanks
Ravi

Hi Ravi
Glad to hear you solved this. It is very gratifying when one solves it alone, don't you think?
Best wishes
Michael

Connection of oracle database in database server from application server

Hi,
I have two servers, one is application server and another one is database server…..
I want to connect oracle 10g database in database server to application server. In application server oracle 10g client is installed……In database server, I have set tnsnames.ora, Listener.ora …while checking in lsnrctl…the particular sid is running fine…
In application server, while I give as sqlplus
After giving username and password its showing error as
ORA-12545: Connect failed because target host or object does not exist
While surfing in net it shows check tnsnames.ora and listener.ora….. I have set the environmental variables here in application server…..
It’s connecting when I give
Sqlplus
Sql>username/password @ hostname: 1521/sid_name
Is it possible to connect with the username and password
I have set the host names in /etc/hosts….
If we are giving the hostname, port number and Sid name this connects without using tnsnames.ora…..
While pinging between two servers the connectivity is there between two servers…..
Could u pls help me out?
Thanks in advance

hi,
as u said i have done that ..s.till the same problem persists...
lsnrctl>services
$ lsnrctl
LSNRCTL for IBM/AIX RISC System/6000: Version 10.2.0.1.0 - Production on 08-FEB-2007 03:56:23
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> services
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "RBTT" has 1 instance(s).
Instance "RBTT", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "RBTTXDB" has 1 instance(s).
Instance "RBTT", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: emea, pid: 197076>
(ADDRESS=(PROTOCOL=tcp)(HOST=emea)(PORT=37484))
Service "RBTT_XPT" has 1 instance(s).
Instance "RBTT", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER

How to connect to Oracle database from webdynprojava application

Hi
How to connect to Oracle database from webdynprojava application. where can we provide the code to connect to database.?
Thank You.

Hi,
You need to create Java Bean model. The bean is a typical java bean with default constructor, getter and setter. You can have additional methods for query etc. The attributes in the class will be your model node and attributes.
However you need to configure the connection and create JNDI using visual administrator before writing the code.
You can also consider writing Session EJB with oracle and using them in WD.
http://help.sap.com/saphelp_nwce10/helpdata/en/45/dcaa4f05535591e10000000a1553f7/frameset.htm
Srini

Export - Import in Oracle Application Database

The export in Oracle Applications Database works fine.
But the import always show some issue and sometimes never completes.
Even if it completes it complete with error , how to ensure an error free export/import ?
How to handle a table movement if the table consists of a LONG column ?

The errors are cannot import this tables..
Also mostly are of Long tables..Any IMP-XXXXX or ORA-XXXXX messages?
Can you explain how long objects are exported and imported ?What type of objects?
What is the database version?
Are you doing a full database import?
Also sometimes import hangs for 2/3 days?Does it hang when importing a specific object?
Did you follow the steps outlined in the following notes when you did the Export/Import?
Note: 362205.1 - 10g Release 2 Export/Import Process for Oracle Applications Release 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=362205.1
Note: 230627.1 - 9i Export/Import Process for Oracle Applications Release 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230627.1

Auditing in oracle 10g database and oracle 10g application server

Dear friends,
We have oracle 10g application server and oracle 10g database server in place.My criteria is to audit users connected using oracle application user credentials to the database.
Can you please tell me how can i do it.
Thanks & regards,

Its the database connection you want to track. The session audit will show where it came from.
Auditing is turned using this command:
alter system set audit_trail = DB scope=spfile;
Note: The use of spfile will require a DB bounce before audit starts
To audit Sessions:
audit create session;
Query by Audit Type:
SELECT A.USERNAME,
OS_USERNAME,
A.TIMESTAMP,
A.RETURNCODE,
TERMINAL,
USERHOST
FROM DBA_AUDIT_SESSION A
WHERE USERHOST = <replace with iAS servername> ;
By User
SELECT USERNAME,OBJ_NAME,ACTION_NAME , TIMESTAMP
FROM DBA_AUDIT_TRAIL WHERE USERNAME = 'SCOTT';
Check for users sharing database accounts
select count(distinct(terminal)),username
from dba_audit_session
having count(distinct(terminal))>1
group by username;
Attempts to access the database at unusual hours
SELECT username, terminal, action_name, returncode,
TO_CHAR (TIMESTAMP, 'DD-MON-YYYY HH24:MI:SS'),
TO_CHAR (logoff_time, 'DD-MON-YYYY HH24:MI:SS')
FROM dba_audit_session
WHERE TO_DATE (TO_CHAR (TIMESTAMP, 'HH24:MI:SS'), 'HH24:MI:SS') <
TO_DATE ('08:00:00', 'HH24:MI:SS')
OR TO_DATE (TO_CHAR (TIMESTAMP, 'HH24:MI:SS'), 'HH24:MI:SS') >
TO_DATE ('19:30:00', 'HH24:MI:SS');
Attempts to access the database with non-existent users
SELECT username, terminal, TO_CHAR (TIMESTAMP, 'DD-MON-YYYY HH24:MI:SS')
FROM dba_audit_session
WHERE returncode <> 0
AND NOT EXISTS (SELECT 'x'
FROM dba_users
WHERE dba_users.username = dba_audit_session.username);
Other audits you might consider:
audit grant any object privilege;
audit alter user;
audit create user;
audit drop user;
audit drop tablespace;
audit grant any role;
audit grant any privilege;
audit alter system;
audit alter session;
audit delete on AUD$ by access;
audit insert on AUD$ by access;
audit update on AUD$ by access;
audit delete table;
audit create tablespace;
audit alter database;
audit create role;
audit create table;
audit alter any procedure;
audit create view;
audit drop any procedure;
audit drop profile;
audit alter profile;
audit alter any table;
audit create public database link;
Best Regards
mseberg

Installing Oracle Application Server 10.2 for Oracle Database Lite

Can anybody please tell me how to install oracle application server 10.2 for oracle database lite (i use oracle database lite for my final project). I use wi-fi connection to synchronize between pda and my laptop as server. Should i install oracle internet directory before installing oracle application server? I have difficulties in installing application server, what are the options should i take in every page of installation? Thanks before.

Install with the base, do not select any other options. Only choose webcache if you require the use of a software load balancer.

Recteaing database in Oracle Application

Similar Messages

Maybe you are looking for