Redirect to their corresponding index.jsp files from multiple sub folders

Hi,
I have a doc root in the location /opt/htdocs/defaultapp, where defaultapp is the application with war file(with jsps and java code) in weblogic.
There are multiple sub folders in docroot like /opt/htdocs/defaultapp/ra, /opt/htdocs/defaultapp/info, ...etc.
ra, info has index.jsp files from weblogic but not in docroot. So, If there are 12 sub folders like this, how can I use a single <If> condition to do that.
I can also do in this way
NameTrans fn="restart" from="/ra/" uri="/ra/index.jsp"
NameTrans fn="restart" from="/info/" uri="/info/index.jsp"
If I don't define in the above manner, the browser is giving me the directory listing.
again I have subfolders under /ra, /info but without jsps, so when a user tries to open these folders it should return him an error page
finally, if the user requests
http://192.168.1.1:10000/<any-sub-folder>/ it should open http://192.168.1.1:10000/<any-sub-folder>/index.jsp
if the user requests http://192.168.1.1:10000/<any-sub-folder>/<any-sub-folder2> it should redirect to error page
Thanks,

If /opt/htdocs/defaultapp is a Java web application being served by WebLogic then you shouldn't be configuring Sun Web Server to do the welcome file processing for directories. Instead, you should look at the welcome file configuration in WebLogic and in your web application.

Similar Messages

How to call a .jsp file from Applet

Could any one guide me how to call a .jsp file from a Applet using action Event.
Thanks

http://javaalmanac.com/cgi-bin/search/find.pl?words=URL+post

Running a JSP file from the IDE causes error

When I try to run a JSP file from a list of project files, I'm getting the following error:
- C:\jdev\jdev9.0.3.4\jdev\mywork\ei_SmartWS\JavaEdge.war!\JavaEdge\src\web\WEB-INF\jsp\searchFormContent.jsp
X Error: JSP files must reside in the server root directory or a subdirectory beneath it
Anyone knows why it's doing this?

Or Web app root, of course:
your-web-app ---> JSPs, HTML pages here
WEB-INF ---> web.xml goes here
classes ---> Loose .class files go here.
lib ---> 3rd party JAR files go here.
MOD

Error accessing JSp file from Tomcat4.1.27 at line:-1 in the jsp file: null

Hi...when I tried to access my JSp file from tomcat 4.1.27 web server, I got the following error message. Can anyone help me out?
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: -1 in the jsp file: null
Generated servlet error:
[javac] Compiling 1 source file
C:\Tomcat\work\Standalone\localhost\Tree\jspfiles\tree_jsp.java:8: '.' expected
import java;
^
C:\Tomcat\work\Standalone\localhost\Tree\jspfiles\tree_jsp.java:80: illegal start of expression
private static java.util.Vector jspxincludes;
^
C:\Tomcat\work\Standalone\localhost\Tree\jspfiles\tree_jsp.java:82: illegal start of expression
public java.util.List getIncludes() {
^
C:\Tomcat\work\Standalone\localhost\Tree\jspfiles\tree_jsp.java:280: '}' expected
^
4 errors
     at org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:130)
     at org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:293)
     at org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:353)
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:370)
     at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:473)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:190)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:256)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
     at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2416)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
     at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:171)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
     at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:601)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:392)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:565)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:619)
     at java.lang.Thread.run(Thread.java:534)

You JSP has four compile errors:
C:\Tomcat\work\Standalone\localhost\Tree\jspfiles\tree_jsp.java:8: '.' expected
import java;Invalid import. You need to import a whole package (*) or single class.
import java; is wrong
import java.util.*; is right
import java.util.List; is right
C:\Tomcat\work\Standalone\localhost\Tree\jspfiles\tree_jsp.java:80: illegal start of expression
private static java.util.Vector jspxincludes;
C:\Tomcat\work\Standalone\localhost\Tree\jspfiles\tree_jsp.java:82: illegal start of expression
public java.util.List getIncludes() {Check the lines before these to make sure you didn't leave off a semi-colon, parens (')') or bracket ('}').
C:\Tomcat\work\Standalone\localhost\Tree\jspfiles\tree_jsp.java:280: '}' expectedYou are missing a closing bracket ('}') somewhere.
The message about the "line -1" error is the standard message that is always given when there are compile errors in the JSP.

How to get value on jsp file from ActionServlets class

Hi All,
I am facing problem in action servlets class into Struts, I am able to get the value on jsp file from action class with the help of session scope but i want to another method for it , so how i can solve the problem.Plz help me
Thanks......... in advance

I got a way out to access the attribute, i feel it is
<jsp:usebean id="myRack" class="settings.Rack"/>
<c:foreach var="book" item="myRack.books">
</c:foreach>
I am not able to check if this is correct or not because myRack.books is not having any value set by me in the request scope. How do i get instance of Rack class set by another page in the current request? I can get the value if i use scriptlet but i dont want to use scriptlet.
I am continiously trying, if I get an answer, I shall post, else pls somebody guide.

Creating an XML file from multiple sql tables

I have very little xml experience, but need to generate an xml file from multiple table. I know what the output needs to look like, but do not know how to setup the code. Any help would be appreciated.
- <Practice SourceID="EPIC" ExternalPracticeID="PPAWB">
- <Provider ExternalProviderID="TB2" FirstName="THOMAS G" LastName="BREWSTER">
- <Patient ExternalPatientID="99999" OldExternalPatID="" FirstName="test" MiddleName="J" LastName="test" Gender="M" DateOfBirth="2005-08-12" SocSecNumber="000-00-0000" LanguageID="22" AddressOne="test" AddressTwo="" City="test" StateID="20" ZipCode="99999" DayPhone="" EveningPhone="207-999-9999" StatusID="">
<Measure MeasureID="2" MeasureValue="5" MeasureDate="2008-10-24 13:43:00" />
<Measure MeasureID="2" MeasureValue="5" MeasureDate="2008-10-24 14:23:00" />
<Measure MeasureID="3" MeasureValue="1" MeasureDate="2008-10-24 13:43:00" />
<Measure MeasureID="3" MeasureValue="1" MeasureDate="2008-10-24 14:23:00" />
<Measure MeasureID="32" MeasureValue="3" MeasureDate="2008-10-24 13:51:00" />
<Measure MeasureID="33" MeasureValue="1" MeasureDate="2008-10-24 13:43:00" />
<Measure MeasureID="33" MeasureValue="1" MeasureDate="2009-02-09 10:09:00" />
<Measure MeasureID="4" MeasureValue="5" MeasureDate="2008-10-24 13:43:00" />
<Measure MeasureID="4" MeasureValue="5" MeasureDate="2008-10-24 14:23:00" />
<Measure MeasureID="40" MeasureValue="2008-10-24 13:43:00" MeasureDate="2008-10-24 13:43:00" />
<Measure MeasureID="40" MeasureValue="2008-10-24 14:23:00" MeasureDate="2008-10-24 14:23:00" />
<Measure MeasureID="41" MeasureValue="2008-10-24 13:43:00" MeasureDate="2008-10-24 13:43:00" />
<Measure MeasureID="41" MeasureValue="2008-10-24 13:51:00" MeasureDate="2008-10-24 13:51:00" />
</Patient>
</Provider>
</Practice>

You are interested in XMLElement and probably XMLAgg. Since you didn't list a version, I can't provide links to the corresponding documentation. I cringe at all the attributes on the Patient element as that info should really be elements.
To create the Measure node, your overall SQL statement may look something like (not tested)
SELECT XMLElement....
          XMLAgg(SELECT XMLElement
                   FROM measures_table
                  WHERE join condition to parent)
FROM patient,
       provider,
       practice
WHERE join conditionsFor additional help, please include your version (4 digits), some sample data, and what you have tried.

To pick files from multiple directory in FILE ADAPTER

Hi all,
Is their any settings or adapter configuration parameters to be used to pick the files from multiple directory .

Hi,
You can only specify one directory on the communication channel. The advance selection allows the selection of different files within this directory.
Therefore you will need a communication channel for each directory you wish to pull files from.
(Just looked at the blog and see it is possible after all - I'm on the wrong SP)
Kind regards
Colin.
Message was edited by:
Colin Bickell

Does JXTA allow you to download files from multiple source like a P2P?

I was interested in working on some networked apps using JXTA and I was wondering if JXTA allows you to download a file from multiple users (ala Bittorrent or P2P) or whether it's by a user to user basis?

To keep the sort of malware rather prevalent for Android devices off of your iPhone. Depending on what you need to download, though, you can probably find a third-party app that will do it. Since such apps keep their documents in their own sandbox, it helps protect the iPhone from being infected by malicious "documents".
Regards.

How do I get files from multiple DVDs that are using thesame file names?

How do I get files from multiple DVDs that are using thesame file names? Message says "file already exists in catalog"
Message was edited by: marcr56

marcr56
I am viewing your question from different perspective, that is, the issue that you face when you are ripping VOBs from a second DVD-VIDEO on DVD disc using Premiere Elements,
It is best to give the Premiere Elements version and computer operating system that it is running on. In the absence of that, I will generalize.
Assuming that you are using
Premiere Elements 12
Add Media
"DVD Camera or Computer Drive"
Video Importer
Typically the Video Importer Save In: is C:\Users\Owner\Videos
Each of your DVD discs is going to have the same names for the ripped VOBs (VTS_01_1.VOB and so on depending on the duration of the movie). Consequently, after the ripping of the first DVD's VOBs and their save to Videos, you will end up with that "files already existing..." block for the ripping of the VOBs from the second DVD.
The answer is, for each DVD disc VOB ripping, to plan ahead and create and set for different folders in Videos in the Save In field of the Video Importer.
Please review and then let us know if that works for you. Please do not hesitate to ask if you need clarification on anything that I have written.
Thank you.
ATR.

'No Upload Authorization' While Uploading a Text File from Multiple Select

Hi all,
   The User is trying to upload a text file from Multiple Selection screen of a Query in BEx and it gives the error message of 'No Upload Authorization' (Error DB886).
   In 'Logon data' tab of Tcode SU01, it has 'User' for 'User Group for Authorization check' for this User.
   I could upload a text file from Multiple Selection screen with my User Id.
   An idea about this error, PLEASE ?
Thanks,
Venkat.

Hi Ron,
   This User does not have the access to Tcode ST01.
   The user executed Tcode SU53 immediately following the authorization failure to see the authorization objects. The 'Authorization obj' is blank and under the Description it has 'The last Authorization check was successful' with green tick mark.
Any further suggestions, PLEASE.
Thanks.

How to create a pdf file from multiple images ?

Dear All,
I want to create a SINGLE page pdf file from two or more page size images that are combined to make a single page pdf. Again, this question is on pdfs that are made out of several, atleast two color images and a black-and-white mask for one of them.
I have such pdf files from an unknown source (the producer is edited out) whereby there are three tiff images, obtained using the well known pdfimages extractor.
When I want to make a pdf out of tiff or png or other image formats, I right click and tell Adobe Acrobat to make a pdf.
However, I dont know how I can give a command to select say, three tif images and specify which is the mask for which and then join them in a way that I get the pdf from the composite of the two color images and a mask for one of them.
Please help me out.
I am a little familiar with the pdf structure skeleton and when necessary, fixed xref tables in one of my favorite editors. A few years ago, I also wrote a bunch of javascripts to make some annotations and needed some automation and used some itext type libraries. However, I need your help in this problem as I am now rusty and forgot some of what I studied to solve my earlier problems. This is a new problem for me. Gentle hints from you would be very nice to help me in this problem. Please specify if necessary what manual and pages to read. in the pdfspec.
Best Regards
Disabled Veteran [physically handicapped]

Hello Again.
On Fri, May 11, 2012 at 12:20 PM, lrosenth <[email protected]> wrote:
>
> Re: How to create a pdf file from multiple images ?
>
> created by lrosenth in PDF Language and Specifications - View the full
> discussion
> ________________________________
>
> No clue who Irving is…
>
I was hoping to have your first name so its easy for me to address you.
> I have no clue what OS platform, programming language, etc. you use so
> can’t really narrow things down.
I would gladly mention that I am working on windows platform, preferably XP.
I can also work on linux for free products that come with it.
> Also, as this is an Adobe forum, we only
> recommend Adobe products – so there may be other options that even my list
> wouldn’t include.
But adding other products, for the help of an adobe products user,
even if it outside adobe, shall add greater prestige to your company
and give impression of user-centeredness.
> If you read ISO 32000-1:2008 (aka the PDF standard), you will find the
> information about Images and Image Masks well described. I didn’t think I
> needed to repeat any of that information.
Well, just add the few pdf stanzas since you are proficient on it and
I am presently a little rusty as I mentioned. Just asking a little
extra yard, not even to go an extra mile.
> And, if you read that same document, you will see that there is NO SUCH
> THING as a “text only PDF”. All PDF documents are structured binary files.
Well, ascii format or uncompressed format that is human readable. I
know its a binary file, but human readable ascii version of it.
I hope you can give me some stanza and various other approaches
possible so I can select or combine things for myself. I see only a
miniscule number of posts claiming to have written masks in this forum
and then with no details.
Regards
Roger
Message was edited by: dying veteran
because the adobe posting system went crazy and truncated all except the first line ... dunno why

How to pickup files from multiple directories

Hi all,
How to pickup files from multiple directories and send it to two different folders at target
Ex:
files\xi\us\US.txt
files\xi\uk\UK.txt
i need to pick up the above mentioned two files and send it to the following paths
app1\files\us\download\US.txt
app1\files\uk\download\UK.txt
US.txt has to goto US folder and UK.txt has to goto UK folder only
Regards

Hi,
To pick form multiple folders, select Advanced Mode for file selection in file adapter..
there u can specify directory name/file names
Refer
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
To put those files at multiple folders write a command line arguments for this.. go through this weblog...
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
XI/PI: Command line sample functions
/people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
Hope this will help you....
Regds,
Pinangshuk.

Retrive files from multiple source directories

Hi,
I need to retrive diffirent formet files from multiple directories and based on file name I need to send it to destination folders. Can anybody suggest me How can I impliment this interface.
Thanks & Regards
VenkatK

Venkat,
I hope since you are taking different format files, you are not doing any mapping. You are moving from one location to another location, because if you different formats then you can do in one mapping your requirement.
If it is correct then as shabharish mentioned you can pick the files using multiple file sender adapters. With this you can pick the files, but to send to different directories enable ASMA in sender file commkunication channel. Then in receiver communication check the extension for each format and then give the directory name so that it routes to the destination you mentioned.
Regards,
---Satish

Picking files from multiple folders based on name send to destination folde

Hi,
I want to pick multiple files from multiple folders with one root folder. Based on file name I want to send it to diffirent folders. No need to go for message mapping. Can anyone suggest me.
Thanks & Regards,
Prasad Kotla.

Hi Prasad,
to pick the files from multiple source directory, can use "Advance Selection for Source File" in Sender CC.
If you wand to develop a Scenario without Message mapping, develop a scenario as "Sender as Virtual receiver"
This option is available in Sender agreement, just give the dummy name for Msg Interface and Namespace, Name defined should be same in Rec Agreement.
Develop only: Sende CC, Receiver CC, SA, RA
No need to develop ID and RD as no mapping is involved.
If u want to send the files to different folders of receiver side, just develop the adapter module which changes the directory based on the sender filename.
If the sender and receiver directory is same than check the "adapter specific Msg Attribute" and "directory" checkbox in both the sender and receiver CC. in this case no need to develop Custom module for changing the directory. files will be automatically placed in the path they were picked from sendor directory
appreciate if useful
regards,
chandra shekhar

FILES FROM MULTIPLE DIRECTORIES

Hi Experts,
                I got a doubt here plz clarify it
    1.How can we pick files from multiple directories ? and all the files will have different names?
                Plz clarify this, good explanations willbe rewarded .
                                                                                Regards,
                                                                                Vinod.

Hi Vinod Reddy,
One way that i know to solve this prob is by using the 'File Name Masking'.
This can be done with the sender channel, where you have to specify the
source directory as <NOTHING>
source file as <NOTHING>
This gives you an advanced selection option, where you need to give the Source Directories along with the File name masks (the source files).
Hope this may solve your problem.
regards
vinod v
reward me if its helpful.

Redirect to their corresponding index.jsp files from multiple sub folders

Similar Messages

Maybe you are looking for