Reducing a SWF file size / creating "instance names" for website loading time improvement

Im hoping someone clever can help...
What i have done so far:
1) Created a flipbook using indesign CS5.5 that contains approx 25
images (embedded PNG's), these need to be good quality as this is a
portfolio - I'd also like to keep the 'page curl' effect. This makes the SWF generated cira 25MB.
2) created a Flash website "wrapper" to hold the above flipbook and add
features such as "bookmarks", links to other sites and forward/backward
page navigation buttions.
The issue we have is that because the flipbook SWF is 25MB the site
load time is slow.
What can be done to speed this up without compromising the image
quality?
1) Is there a way to make the indesign SWF smaller?
2) is there a way in indesign to properly give each page an
"instance name" so that they can be controlled from flash and therefore
I can load each pages image as and when needed.
any other ideas?
(If you'd like to visit the website to view the loading issue http://www.lizblackdesigns.co.uk)
Thanks
Liz

these need to be good quality as this is a portfolio
The approach to your portfolio website seems very outdated and will not help you in the near future. Flash is being used less and less with the increase in Mobile Devices being used to access the internet - a large chunk of which include Apple's iDevices which don't support Flash. This alone is a reason not to do it, however there are a few other big issues with the method you have chosen.
There is no "content" on your website for any search engine to find. No text. No meta data. No image alt tags. No titles. Nothing. In other words, your website will not be found by the people you are trying to attract. I would imagine for a portfolio site, you may want to re-think this approach.
The way the Flash file was created is the worst possible way to add Flash to the web as you have only embedded image files - and this is your entire site?! You could have included some text, which would have been viewable by search engines, and used color shapes to increase quality but lower filesize.
The filesize meant it took me over 1 minute to get off your home page. The average internet user will leave your site if you do not keep them interested after 5 seconds. In other words, you should have content of interest viewable within 5 seconds of load time.
If you are set on keeping the Flash setup for your website, re-build using as much text, color shapes and lines as you can (vector work in other words) and do not rasterize/export as image. This will drastically reduce load time and increase quality. You will also want to divide your file into sections and create more than 1 HTML page so that the browser only loads a bit at a time. You might also want to set a maximum size container for the Flash file as on my browser, it looks extremely pixelated and is very large, but unclear.
I would suggest looking into HTML5 if you are keen to create a website that can be viewed by around 98% of the web surfing people and it will also mean you can use an image slider (or similar) to show good quality images of your work. This will aid your site in being found by search engines but will also allow you to update sections of the site without re-publishing the entire Flash file.
Rik

Similar Messages

How to reduce the swf file size of an imported After Effects file

Hi!
I am trying to make a web banner for an internet marketing company, so it has very specific requirements. We had it made in After Effects, and I was able to export it as a FLV file and import to Flash just fine along with the SWF. Now, I need to make the SWF file significantly smaller.
Right now it is 2.5 MB and we can only submit a 40K size SWF. Is it even possible to reduce the size so much and still keep the animation's intregrity?
I am more familiar with Flash than After Effects, but can play around with settings, etc if someone can tell me what to try.
Thank you for your help!

the easiest way to load and play your flv is to use an flvplayback component. you just drag it from the component panel to the stage and, in the properties panel, assign its properties (eg, skin and source).
but that will probably put you just over your 40kb limit and will require the skin.swf to be placed on the server with your banner ad.
to decrease your swf size to negligible, use actionscript to play your flv. this is the barebones code needed. just replace your_video_url.flv:
var nc:NetConnection = new NetConnection();
nc.connect(null);
ns:NetStream = new NetStreamnc);
ns.play("your_video_url.flv");
var video:Video = new Video();
video.attachNetStream(ns);
addChild(video);

How do I reduce a Pages file size so I can create a pdf for e-mailing?

I recently upgraded from Tiger to OS X Leopard. In Tiger, I was able to reduce file size and create a 700 to 800kb file by going to print/color sync/quartz filter/reduce file size/save as pdf. But in Leopard those options can't be accessed from my pages print menu. Any suggestions? Thanks TH

Hi t.h.leeds,
Welcome to Pages discussions.
Another way to reduce the PDF files size is: Print > PDF, Compress PDF. As I create a PDF for e-mailing that's what I do, works well. 99.99% of folks don't print PDF's, they either file in a folder or delete. Viewing on their monitor that Compress PDF appears as it should.
A side note; by using this discussions Search feature in the box that reads "Search Discussions more Options" you could have found the answer to your question. Doing that would be faster than awaiting for an enduser as yourself to respond.
These Discussions are user helping user, not Apple employees answering the question. Questions will be answered when a user such as yourself finds time, desires to, knows the answer along with the time to respond.
Again, welcome to Pages Discussions, have fun here.
Sincerely,
RicD

How to reduce image's file size in Preview?

I am in Preview Version 5.0.3 (504.1). I have a PDF file that is 3.7 meg. in size. That is a big large for what I want to do with it. I would like to reduce its size to something a bit more manageable.   The Preview Help gives these instructions:
To reduce an image’s file size without changing its dimensions:
Choose Tools > Adjust Size.
Select “Resample image.”
Enter a smaller value in the Resolution field.
My problem is that in my open window for this file the "Adjust Size" tool is dimmed. I cannot choose that tool as instructed.
Does anyone know why and how to get Preview to reduce the size of a PDF file?

try File-Save As...
& choose format:pdf    quartz filter:reduce file size
pick another name to check the results - there's no undo

How to reduce illustrator CS4 file size

Hi,
How to reduce illustrator CS4 file size, the file size is alots bigger compare to art work done in indesign?

Hi
Please follow this video tutorial and you will see a small thing can reduce the file size easily. It was really helpfull for me.
How to Reduce AI Vector file size: An Adobe illustrator Tutorial
http://www.youtube.com/watch?v=X5m3TKrXE3g
My AI file size was not going under 1 MB even by deleting extras so what I did is I opened a raster small image of 100 kb with Adobe Illustrator. then deleted the image and saved the file as AI. Then I Copied the whole vector content of original AI file that was bigger then 1 MB with ctrl+c command and pasted it in the new file created with raster image. and saved it. Wow the new file size is only 137 kb now.
Thanks

SWF File Size and Rollover Text Problem

Hi and thanks in advance for any input.
Two problems....
1. SWF File Size
I've made a fairly small (at least in my eyes its small) flash site. However, even tho there really isn't much content, the swf is already 2.4mb and I haven't even finished it. It loads fine on my internet speed, but im worried about general users with slower internet. Is there something i should be doing to get the file size down (hopefully without comprimising quality).
2. Text Buttons (Movie Clips)
The rollover function (Event Listener) for MCs containing text keeps running while the mouse is over the button. I.E. It isnt treating the text box as a button, its treating the text only as a button, so as you roll between one letter and another, the rollover is re-set and re-starts.
The Swf is here.
And the FLA is here. *EDIT* - How can i get this fla to you guys? this doesn't seem to work when i try to download file - it just gives a fla.txt file?
Thanks.
Zack.

Reduce bitmap quality (increase compression).
For each bitmap, select "custom quality" in the symbol properties and set it to no more than 80.
Set the mouseChildren property of the button movieclips to false to avoid mouse events from triggering by child objects (the text inside the movieclip).
services_inner.mouseChildren = false;
projects_inner.mouseChildren = false;
etc..

How to reduce a PDF file size under Adobe Acrobat Reader DC. The size is now 23MB; I need it to be less than 4MB. thanks

how to reduce a PDF file size under Adobe Acrobat Reader DC. The size is now 23MB; I need it to be less than 4MB. thanks

I've found in Pdf's many time when you go to Optimize a PDF and look at the font list there are often up to a 1/2dozen copies of a given font, say Helvetica, then that many Helvetica Bold, or Arial or Ariel Italic
What I do ie remove from list all but one copy of each different font. often dramatically reduces the size. also something lese is Flattening images will in some cases reduce a file size. I have run into a case where it actually made a PDF Larger.

Adobe Flash CS5 generating SWF file size more then fla file?

Hi,
I have developed a video player in adobe flash cs4 and used all vector arts but when I open this fla file in Adobe Flash CS5 and published it, the swf file size more then fla file.
Please see the details below -
Adobe Flash CS4 -
Index.fla file size: 523 KB
Index.swf file size: 55 KB
Adobe Flash CS5 (Same file when open in CS5 and published)
Index.fla file size: 183 KB
Index.swf file size: 215 KB
Please suggest.
Thanks & regards
Sunil Kumar

Not working!
Thanks
Sunil Kumar

How can i reduce the pdf file size? I need to send via email, at the moment its at 10mb

How can i reduce the pdf file size? I need to send via email, at the moment its at 10mb

Reducing PDF file size or Optimizing PDF is the feature that is supported only by Acrobat Pro (desktop app that is not free).
Optimizing PDFs (Acrobat Pro)
Free Adobe Reader products (Reader XI desktop, Reader for iOS, Reader for Android, Reader Touch for Windows 8, etc) do not offer the capability.

I use Adobe Acrobat Pro XI (11.0.08) When performing "Save as" "Reduced file size pdf" Adobe processes for a while then completely stops, and has to close down. Just started doing that today.

I use Adobe Acrobat Pro XI (11.0.08) When performing "Save as" "Reduced file size pdf" Adobe processes for a while then completely stops, and has to close down. Just started doing that today.

I have Windows 8.1, and when I right click on the Windows flag (bottom left), the menu gives me a "Search" option. When I enter "%temp%", it goes to " "my username"/ appdata/temp" which is a list of file 1718 file folders. Many are empty but I did a small sample. Is that the right place to delete? I tried Windows- Disk Clean, but that did not help.

When i open a new document, my "width" and "lenght" add two zeros automatically to file size??? For example basic A4 size in mm is 210 00mm x 297 00mm? And i can´t do nothing about it! Why on earth?

When i open a new document, my "width" and "lenght" add two zeros automatically to file size??? For example basic A4 size in mm is 210 00mm x 297 00mm? And i can´t do nothing about it! Why on earth?
This "error note" must have something to do about it?

elppaelo,
You may try the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Script to "Optimize to file size" (automatically) in "Save for Web"?

Hello, all,
I'm a novice when it comes to scripts in Photoshop, but I'm really coming to the conclusion that this is the only way to automate the actions I need to do, whithout having to do it one-by-one.
Is it possible to write a Script to automatically choose the option (and settings) to "Optimize to file size" in the "Save for Web" dialog?
Is it also possible to save the file in the document's original folder, instead of a single specific folder, using "Save for Web"?
I have a really big number of different files (some .JPEG, some .PNG, some .TIFF) and I need to generate a single "reference.jpg" in each one of those original folders. It's quite easy to use whatever method to separate all those files in some lists and later open them in Photoshop in small subgroups of files.
I only have a restriction of size (60Kb) for those "reference.jpg" files, and I would like to save all of them, in each document original folder, with the best possible quality within that size constraint.
Here's my problem:
I can easily do that with a very simple action, but, that specific way, I have no control whatsoever over the resulting filesize of those "reference.jpg" files generated. Moreover, I also find the "save for web" command create a more "slim" file, allowing for better quality within my size constraint.

c.pfaffenbichler wrote:
"I can’t make that out in the ScriptingListener code, but maybe someone else knows better or has a Script for the task already.
I seem to remember a thread where it was discussed to save a copy, check its size and overwrite it with different settings if it was too big … that should be possible, but may run longer."
Many, many thanks for your reply, c.pfaffenbichler! I spend the whole day (and night) yesterday learning (or rather trying to learn) about javascript, OOP, and how it should be applied in Photoshop's Scripts.
I was able to modify some snippets of code I found on the web to suit my needs (temporarily):
//SaveforWebSP.jsx
//Save a fixed width image with a size constraint in its original folder
var docRef = activeDocument;
var outputFolder = docRef.path;
NamesaveRef = new File( outputFolder + "/reference.jpg" );
var NewfileRef = new File( NamesaveRef )
// quality/size constraints
var w = 300; // new file width
var MaxSz = 61440; // max. 60Kb
var Qlt = 100; // initial quality 100
var x = 1; // decreasing step
// resize the image to the right width
docRef.resizeImage(UnitValue(w,"px"),null,100,ResampleMethod.BICUBICSHARPER);
// Perform the first SaveForWeb Operation
ExpWeb(NewfileRef, Qlt);
// Keep trying to save the file with max. Qlt, but under MaxSz
while (NewfileRef.length > MaxSz)
      Qlt = Qlt - x;
      NewfileRef = new File( NewfileRef );
      NewfileRef.remove();
      ExpWeb(NewfileRef, Qlt); // Perform a new SaveForWeb Operation, with slightly lower Qlt
         if (Qlt <= 50) {
           alert("The file can't be saved with the desired size AND quality.");
           break // break the loop whenever the quality is as low as 50 (this shouldn't need to happen)
var FileSz = NewfileRef.length/1024;
FileSz = Math.round(FileSz);
// close the original file without saving
activeDocument.close(SaveOptions.DONOTSAVECHANGES);
// SaveForWeb Export, with the desired constraints and parameters
function ExpWeb(FileNm, Qlt)
      var options = new ExportOptionsSaveForWeb();
      options.quality = Qlt;   // Start with highest quality (biggest file).
      options.format = SaveDocumentType.JPEG;   // Save Format for the file
      docRef.exportDocument(File(FileNm), ExportType.SAVEFORWEB, options);
This works, but it takes a long time and keep the HD disk "going crazy" during the time it is processing the images.
This is too bad, because the "Optimize to file size" dialog in the "Save for Web" would have been so much faster, efficient and much less "disk-intensive"...

Question about file size when using "Export for Web"

Hi!
I created a .mov file and worked to get a great balance between file size and quality so that I could deliver it via the web and make it easier for end users to see the video on a slower connection.
My question: When I use "Export for Web," my .mov file is converted into a very large .m4v file--more than double the size of the original file. I know that this export option is to optimize the file for a wide variety of users/internet speeds. Am I correct in guessing that the end size is not an issue? I would post the .mov file instead, but I really like the option of embedding into a html page along with the "click to play" option.
Bottom line--is it better to post the smaller .mov file that i originally started with or to go ahead and link to the bigger .m4v file that was created with the "Export for Web" option?

"Export for Web" is a feature of QuickTime Pro and it makes 4 files and the html page code for easy copy/paste Web page editing.
The very first file is called a "reference movie" and it links to the other 3 files (56kbps, 900kbps and 1.5Mbps). It, and the page code, "read" the connection speed of the viewing hardware and "serve up" the correct file based on that connection speed.
In nearly all cases the "Desktop" version would still be smaller in file size than the original source. The times the file would "increase" in file size would be when an already compressed was used as the source file. You can find out more about your source file by opening it in QuickTime Player and viewing the Movie Inspector window information.
There are dozens of other html "tricks" that could be used if your source file is already compressed but you want a different display size:
Page code to show "aspect" or scale="tofit". This code allows values "outside" of those found in the actual QuickTime file be used for the Web page display. A 320X240 QuickTime .mov file looks pretty good at double size (640X480) but the file size would still be that of the source file.
"Poster Movie" is another html trick that loads the Web based file directly in the QuickTime Player application (bypassing Web page layout restrictions). These files are also known as "Presentation Movies".
Another method is the QuickTime Media Link file (.qtl). These are simple text based files that are used as a "direct link". These use simple XML (Extensible Markup Language) and are easily created in any text editing application. The simple syntax has amazing control over a simple QuickTime .mov file. You can launch (and quit) the QuickTime Player, display at other dimensions and even embed "links" inside the display.
Some of my files as examples:
http://homepage.mac.com/kkirkster/Lemon_Trees/ a "Poster Movie" style.
http://homepage.mac.com/kkirkster/.Public/RedneckTexasChristmas.qtl
A QuickTime Media Link file. A tiny file should download to the viewing machine, launch QuickTime Player, present the movie and it even includes a "link" to my Web page.
Edit: It appears you must now double click the .qtl download to launch QuickTime.

Creating alias name for Context

I have a servlet instance name Sample I can access like this
http://localhost:8080/Sample
I am going to change the instance name programmatic ally. For example the same instance has to access like this also
http://localhost:8080/Sample1
http://localhost:8080/Sample2 etc...
this something like one instance with multiple names
what are the steps to do in tomcat side ?? Explain me more clear
One more question , Inside the tomcat webapps i have a folder & place a WAR in it. while restarting the WAR has to expanded right?
this is not done, I know why b'coz is in conf folder, server.xml will have appBase 'webapps' unpackWARs = true. How to change the appBase in server.xml through code.
Thanks in advance,
Saratha

I guess you could do that. With 11g Rac you would be able to use SCAN which is a single dns name to access your cluster. But even in 10g you could create additional names for your vips if you like those names better.
Bjoern

Aperture 3.1.2 When exporting files to Finder is creating a folder for each file, that means export 200 files is creating 200 folders for each files. Does anyone knows how to fix this. Thanks

Aperture 3.1.2 When exporting files to Finder is creating a folder for each file, that means export 200 files is creating 200 folders for each files. Does anyone knows how to fix this. Thanks

No. This is NOT true. I've been battling with this for a couple hours.
I choose Export>Versions
choose
Subfolder Format: Project Name
no custom subfolder
Name Format: Current Version Name.
Aperture creates project folders for each image and names them Projects1, Projects2, Projects3 etc.
To be sure, I have no project named Projects
x
This particular Aperture library has 16 projects. you can see in the screen grab it's created more than 30 folders
If I uncheck the Subfolder, that is say NONE, I just get images and images and images, not in their project folders (of course, because I've said NONE, so why would it put them in project folders?)
I just want to export the entire library and have the versions placed in folders named by the projects from which they came.... ez enough, no?

Reducing a SWF file size / creating "instance names" for website loading time improvement

Similar Messages

Maybe you are looking for