Reducing the length of my movie
I finally discovered why i couldnt upload it onto yOu tube despite the fact I THOUGHT i had trimmed the length from an hour to about 5 mins(in fact two clips left on the clips viewer).I moved all the others back onto the clips pane ,i clicked *save as* gave it a new title but it took an age to complete and I realised it was saving all the clips i removed except they were not there.When i played back the shortened movie the playhead carried on moving to the right after it had crossed both clips as if the the clips i removed were still there.
Can someone please advise me .Many thanks
iMovie 6 uses nondestructive editing, so even if you trimmed back your movie to a shortened version, iMovie still keeps all the clips used in the movie, saving them in their entirety. If you use only 4 seconds of a 10 minute clip, iMovie keeps the entire 10 minute clip.
If you want to keep just the clips that are actually in the movie, 'share' your shortened iMovie as Quick Time 'Full Quality' and save it to a convenient place such as the desktop.
Once that has been created, open a new iMovie and drag that new quicktime movie clip into it. Your movie will be one long clip.
But now, this iMovie contains only that quicktime clip and no others.
It will be shorter.
Similar Messages
-
How to reduce the length of the info object that's being used?
Hi All,
I have created info objects and used them in a DSO. Now I want to reduce the length of the info objects but i'm unable to do it. When I reduced the length and tried activating the Info object, it's giving me error and the info object is not getting activated. Please guide me how I can reduce the length and activate the Info Object.
Thanks
Hima BinduReducing the length of an infoobject is not that easy
Cleanest way -
Drop all transaction data for that infoobject
Drop all data in the DSO and cubes.
Reduce the length and then activate and transport all the infoobject and there dependence objects. -
Reducing the length of a feild
Hi,
I've matnr as CHAR of 18 length in the LINV table ..... Is there any way I can reduce the length into 10 ...... Thankshi Khan,
do this way then ..
loop at itab.
v_matnr = itab-matnr+0(10)
write : 0 v_matnr.
clear v_matnr.
endloop.
Regards,
Santosh -
How to reduce the length of lines in Smartform windows
Hi,
In smartform Mainwindow or any window, how to draw the vertical lines and horizontal lines and how to reduce the lengths...very urgent please explain.
Thanks and Regards,
suryaHi Surya,
You should use templates for this purpose.
and if you are in table then you can not use templates. Here you should go for the line type.
and in either case there will be pattern tab in the right side bottom.
if double click on the teplate it will get display.
click on the select pattern and select the required format and give the line width
ex 15 TW
I think this will help you -
How to reduce the length of PageHeader
Hi,
I developed few webdynpro application.In each iViw i given the UI element Page Header and number of text element and corresponding input field. So because of this the length between the text and the input field is looking very wide . In my case input field is started from the end point of the Page Header length.I want to reduce the length of the Page Header as well as the length between the text and input field.
So what change we can make in property editor for getting the above requirement? Any useful answer will highly appriciated.
Thanks,
Kundanhi,
Place your UI elements in a transparent container with layout selected as Matrix Layout and stretchedhorizontally property set to false. Elements inside the container which are placed at the begining of a row should have "layoutdata" property selected as MatrixHeadData and rest of the elements in the same row should have "layoutdata" property set as MatrixData.
hope this resolves your problem
regards,
amit bagati -
NEED HELP IN REDUCING THE LENGTH OF QUERY WHICH IS ATTACHED IN A FILE PL_SQ
Hi Everyone,
THANKS FOR POSTING THE REPLIES FOR MY LAST THREAD. THAT REALLY HELPED. I CAME BACK AGAIN BECAUSE I NEED HELP FROM THIS FORUM IN REDUING THE LENGTH OF MY QUERY WHICH I HAD GIVEN BELOW. i DIDN'T HAD THE CHOICE OF ATTACHING A FILE OF MY DATA HERE.ITS VERY HUGE DATA SO I AM NOT ABLE TO PROVIDE ATLEAST SAMPLE DATA BECAUSE THE COLUMNS ARE OVERLAPPING IF I AM PASTING THE DATA HERE. I HOPE IT WILL BE UNDERSTANDABLE. THE QUERY WHICH I WROTE IS TOO LONG AND TAKING HOURS TOGETHER TO RUN AND DISPLAY RESULT. IT WOULD BE A GREAT FAVOUR TO ME IF ANYONE CAN REDUCE THE LINES IN MY QUERY AND MAKE IT RUN FAST....PLEASE I WAS NOT KNOWING THE WAY HOW TO MAKE IT SHORT. IT HAS MANY LOGICS IN IT... :? PLEASE SUGGEST ME IF THERE IS ANY OPTION FOR ATTACHING A FILE SO THAT I CAN SEND MY SAMPLE DATA...
select pt.product code,
pt.product status,
pt.store code,
pt.store status,
pr.scheduled date,
pr.actual date,
pl.scheduled date,
pl.actual date,
ps.scheduled date,
ps.actual date,
fo.scheduled date,
fo.actual date,
fb.scheduled date,
fb.actual date,
fod.scheduled date,
fod.actual date,
lo.scheduled date,
lo.actual date,
lom.scheduled date,
lom.actual date,
lod.scheduled date,
lod.actual date,
/*pr*/
case
WHEN pt.store status = 'Cancelled' OR
pt.store status = 'Stopped' THEN
cast('N/A' AS nvarchar2(30))
WHEN pt.store status = 'Completed' OR
pt.store status = 'Active' THEN
NVL2(pr.scheduled date,
cast(pr.scheduled date AS nvarchar2(30)),
'Null')
when pt.store status = 'Planned' THEN
NVL2(pr.scheduled date,
cast(pr.scheduled date AS nvarchar2(30)),
'Null')
end as DER_pr_SHC,
case
when pt.store status = 'Cancelled' OR
pt.store status = 'Stopped' THEN
cast('N/A' AS nvarchar2(30))
WHEN pt.store status = 'Completed' THEN
NVL2(pr.actual date,
cast(pr.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
pr.scheduled date is null THEN
NVL2(pr.actual date,
cast(pr.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
pr.scheduled date < CURRENT_DATE THEN
NVL2(pr.actual date,
cast(pr.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
pr.scheduled date >= CURRENT_DATE THEN
NVL2(pr.actual date,
cast(pr.actual date AS nvarchar2(30)),
'N/A')
when pt.store status = 'Planned' and
pr.scheduled date is null THEN
NVL2(pr.actual date,
cast(pr.actual date AS nvarchar2(30)),
'N/A')
when pt.store status = 'Planned' and
pr.scheduled date < CURRENT_DATE THEN
NVL2(pr.actual date,
cast(pr.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Planned' and
pr.scheduled date >= CURRENT_DATE THEN
NVL2(pr.actual date,
cast(pr.actual date AS nvarchar2(30)),
'N/A')
end as DER_pr_ACT,
/*pl*/
case
WHEN pt.store status = 'Cancelled' OR
pt.store status = 'Stopped' THEN
cast('N/A' AS nvarchar2(30))
WHEN pt.store status = 'Completed' OR
pt.store status = 'Active' THEN
NVL2(pl.scheduled date,
cast(pl.scheduled date AS nvarchar2(30)),
'Null')
when pt.store status = 'Planned' THEN
NVL2(pl.scheduled date,
cast(pl.scheduled date AS nvarchar2(30)),
'Null')
end as DER_pl_SHC,
case
when pt.store status = 'Cancelled' OR
pt.store status = 'Stopped' THEN
cast('N/A' AS nvarchar2(30))
WHEN pt.store status = 'Completed' THEN
NVL2(pl.actual date,
cast(pl.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
pl.scheduled date is null THEN
NVL2(pl.actual date,
cast(pl.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
pl.scheduled date < CURRENT_DATE THEN
NVL2(pl.actual date,
cast(pl.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
pl.scheduled date >= CURRENT_DATE THEN
NVL2(pl.actual date,
cast(pl.actual date AS nvarchar2(30)),
'N/A')
when pt.store status = 'Planned' and
pl.scheduled date is null THEN
NVL2(pl.actual date,
cast(pl.actual date AS nvarchar2(30)),
'N/A')
when pt.store status = 'Planned' and
pl.scheduled date < CURRENT_DATE THEN
NVL2(pl.actual date,
cast(pl.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Planned' and
pl.scheduled date >= CURRENT_DATE THEN
NVL2(pl.actual date,
cast(pl.actual date AS nvarchar2(30)),
'N/A')
end as DER_pl_ACT,
/*ps*/
case
WHEN pt.store status = 'Cancelled' OR
pt.store status = 'Stopped' THEN
cast('N/A' AS nvarchar2(30))
WHEN pt.store status = 'Completed' OR
pt.store status = 'Active' THEN
NVL2(ps.scheduled date,
cast(ps.scheduled date AS nvarchar2(30)),
'Null')
when pt.store status = 'planned' THEN
NVL2(ps.scheduled date,
cast(ps.scheduled date AS nvarchar2(30)),
'Null')
end as DER_ps_SHC,
case
when pt.store status = 'Cancelled' OR
pt.store status = 'Stopped' THEN
cast('N/A' AS nvarchar2(30))
WHEN pt.store status = 'Completed' THEN
NVL2(ps.actual date,
cast(ps.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
ps.scheduled date is null THEN
NVL2(ps.actual date,
cast(ps.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
ps.scheduled date < CURRENT_DATE THEN
NVL2(ps.actual date,
cast(ps.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
ps.scheduled date >= CURRENT_DATE THEN
NVL2(ps.actual date,
cast(ps.actual date AS nvarchar2(30)),
'N/A')
when pt.store status = 'planned' and
ps.scheduled date is null THEN
NVL2(ps.actual date,
cast(ps.actual date AS nvarchar2(30)),
'N/A')
when pt.store status = 'planned' and
ps.scheduled date < CURRENT_DATE THEN
NVL2(ps.actual date,
cast(ps.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'planned' and
ps.scheduled date >= CURRENT_DATE THEN
NVL2(ps.actual date,
cast(ps.actual date AS nvarchar2(30)),
'N/A')
end as DER_ps_ACT,
/*fo*/
case
WHEN pt.store status = 'Cancelled' OR
pt.store status = 'Stopped' THEN
cast('N/A' AS nvarchar2(30))
WHEN pt.store status = 'Completed' OR
pt.store status = 'Active' THEN
NVL2(fo.scheduled date,
cast(fo.scheduled date AS nvarchar2(30)),
'Null')
when pt.store status = 'planned' THEN
NVL2(fo.scheduled date,
cast(fo.scheduled date AS nvarchar2(30)),
'Null')
end as DER_fo_SHC,
case
when pt.store status = 'Cancelled' OR
pt.store status = 'Stopped' THEN
cast('N/A' AS nvarchar2(30))
WHEN pt.store status = 'Completed' THEN
NVL2(fo.actual date,
cast(fo.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
fo.scheduled date is null THEN
NVL2(fo.actual date,
cast(fo.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
fo.scheduled date < CURRENT_DATE THEN
NVL2(fo.actual date,
cast(fo.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
fo.scheduled date >= CURRENT_DATE THEN
NVL2(fo.actual date,
cast(fo.actual date AS nvarchar2(30)),
'N/A')
when pt.store status = 'planned' and
fo.scheduled date is null THEN
NVL2(fo.actual date,
cast(fo.actual date AS nvarchar2(30)),
'N/A')
when pt.store status = 'planned' and
fo.scheduled date < CURRENT_DATE THEN
NVL2(fo.actual date,
cast(fo.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'planned' and
fo.scheduled date >= CURRENT_DATE THEN
NVL2(fo.actual date,
cast(fo.actual date AS nvarchar2(30)),
'N/A')
end as DER_fo_ACT,
/*fb*/
case
WHEN pt.store status = 'Cancelled' OR
pt.store status = 'Stopped' THEN
cast('N/A' AS nvarchar2(30))
WHEN pt.store status = 'Completed' OR
pt.store status = 'Active' THEN
NVL2(fb.scheduled date,
cast(fb.scheduled date AS nvarchar2(30)),
'Null')
when pt.store status = 'planned' THEN
NVL2(fb.scheduled date,
cast(fb.scheduled date AS nvarchar2(30)),
'Null')
end as DER_fb_SHC,
case
when pt.store status = 'Cancelled' OR
pt.store status = 'Stopped' THEN
cast('N/A' AS nvarchar2(30))
WHEN pt.store status = 'Completed' THEN
NVL2(fb.actual date,
cast(fb.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
fb.scheduled date is null THEN
NVL2(fb.actual date,
cast(fb.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
fb.scheduled date < CURRENT_DATE THEN
NVL2(fb.actual date,
cast(fb.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
fb.scheduled date >= CURRENT_DATE THEN
NVL2(fb.actual date,
cast(fb.actual date AS nvarchar2(30)),
'N/A')
when pt.store status = 'planned' and
fb.scheduled date is null THEN
NVL2(fb.actual date,
cast(fb.actual date AS nvarchar2(30)),
'N/A')
when pt.store status = 'planned' and
fb.scheduled date < CURRENT_DATE THEN
NVL2(fb.actual date,
cast(fb.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'planned' and
fb.scheduled date >= CURRENT_DATE THEN
NVL2(fb.actual date,
cast(fb.actual date AS nvarchar2(30)),
'N/A')
end as DER_fb_ACT,
/*fod*/
case
WHEN pt.store status = 'Cancelled' OR
pt.store status = 'Stopped' THEN
cast('N/A' AS nvarchar2(30))
WHEN pt.store status = 'Compldeted' OR
pt.store status = 'Active' THEN
NVL2(fod.scheduled date,
cast(fod.scheduled date AS nvarchar2(30)),
'Null')
when pt.store status = 'pldanned' THEN
NVL2(fod.scheduled date,
cast(fod.scheduled date AS nvarchar2(30)),
'Null')
end as DER_fod_SHC,
case
when pt.store status = 'Cancelled' OR
pt.store status = 'Stopped' THEN
cast('N/A' AS nvarchar2(30))
WHEN pt.store status = 'Completed' THEN
NVL2(fod.actual date,
cast(fod.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
fod.scheduled date is null THEN
NVL2(fod.actual date,
cast(fod.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
fod.scheduled date < CURRENT_DATE THEN
NVL2(fod.actual date,
cast(fod.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
fod.scheduled date >= CURRENT_DATE THEN
NVL2(fod.actual date,
cast(fod.actual date AS nvarchar2(30)),
'N/A')
when pt.store status = 'planned' and
fod.scheduled date is null THEN
NVL2(fod.actual date,
cast(fod.actual date AS nvarchar2(30)),
'N/A')
when pt.store status = 'planned' and
fod.scheduled date < CURRENT_DATE THEN
NVL2(fod.actual date,
cast(fod.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'planned' and
fod.scheduled date >= CURRENT_DATE THEN
NVL2(fod.actual date,
cast(fod.actual date AS nvarchar2(30)),
'N/A')
end as DER_fod_ACT,
/*lo*/
case
WHEN pt.store status = 'Cancelled' OR
pt.store status = 'Stopped' THEN
cast('N/A' AS nvarchar2(30))
WHEN pt.store status = 'Completed' OR
pt.store status = 'Active' THEN
NVL2(lo.scheduled date,
cast(lo.scheduled date AS nvarchar2(30)),
'Null')
when pt.store status = 'planned' THEN
NVL2(lo.scheduled date,
cast(lo.scheduled date AS nvarchar2(30)),
'Null')
end as DER_lo_SHC,
case
when pt.store status = 'Cancelled' OR
pt.store status = 'Stopped' THEN
cast('N/A' AS nvarchar2(30))
WHEN pt.store status = 'Completed' THEN
NVL2(lo.actual date,
cast(lo.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
lo.scheduled date is null THEN
NVL2(lo.actual date,
cast(lo.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
lo.scheduled date < CURRENT_DATE THEN
NVL2(lo.actual date,
cast(lo.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
lo.scheduled date >= CURRENT_DATE THEN
NVL2(lo.actual date,
cast(lo.actual date AS nvarchar2(30)),
'N/A')
when pt.store status = 'planned' and
lo.scheduled date is null THEN
NVL2(lo.actual date,
cast(lo.actual date AS nvarchar2(30)),
'N/A')
when pt.store status = 'planned' and
lo.scheduled date < CURRENT_DATE THEN
NVL2(lo.actual date,
cast(lo.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'planned' and
lo.scheduled date >= CURRENT_DATE THEN
NVL2(lo.actual date,
cast(lo.actual date AS nvarchar2(30)),
'N/A')
end as DER_lo_ACT,
/*lom*/
case
WHEN pt.store status = 'Cancelled' OR
pt.store status = 'Stopped' THEN
cast('N/A' AS nvarchar2(30))
WHEN pt.store status = 'Completed' OR
pt.store status = 'Active' THEN
NVL2(lom.scheduled date,
cast(lom.scheduled date AS nvarchar2(30)),
'Null')
when pt.store status = 'planned' THEN
NVL2(lom.scheduled date,
cast(lom.scheduled date AS nvarchar2(30)),
'Null')
end as DER_lom_SHC,
case
when pt.store status = 'Cancelled' OR
pt.store status = 'Stopped' THEN
cast('N/A' AS nvarchar2(30))
WHEN pt.store status = 'Completed' THEN
NVL2(lom.actual date,
cast(lom.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
lom.scheduled date is null THEN
NVL2(lom.actual date,
cast(lom.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
lom.scheduled date < CURRENT_DATE THEN
NVL2(lom.actual date,
cast(lom.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
lom.scheduled date >= CURRENT_DATE THEN
NVL2(lom.actual date,
cast(lom.actual date AS nvarchar2(30)),
'N/A')
when pt.store status = 'planned' and
lom.scheduled date is null THEN
NVL2(lom.actual date,
cast(lom.actual date AS nvarchar2(30)),
'N/A')
when pt.store status = 'planned' and
lom.scheduled date < CURRENT_DATE THEN
NVL2(lom.actual date,
cast(lom.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'planned' and
lom.scheduled date >= CURRENT_DATE THEN
NVL2(lom.actual date,
cast(lom.actual date AS nvarchar2(30)),
'N/A')
end as DER_lom_ACT,
/*lod*/
case
WHEN pt.store status = 'Cancelled' OR
pt.store status = 'Stopped' THEN
cast('N/A' AS nvarchar2(30))
WHEN pt.store status = 'Completed' OR
pt.store status = 'Active' THEN
NVL2(lod.scheduled date,
cast(lod.scheduled date AS nvarchar2(30)),
'Null')
when pt.store status = 'planned' THEN
NVL2(lod.scheduled date,
cast(lod.scheduled date AS nvarchar2(30)),
'Null')
end as DER_lod_SHC,
case
when pt.store status = 'Cancelled' OR
pt.store status = 'Stopped' THEN
cast('N/A' AS nvarchar2(30))
WHEN pt.store status = 'Completed' THEN
NVL2(lod.actual date,
cast(lod.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
lod.scheduled date is null THEN
NVL2(lod.actual date,
cast(lod.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
lod.scheduled date < CURRENT_DATE THEN
NVL2(lod.actual date,
cast(lod.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'Active' and
lod.scheduled date >= CURRENT_DATE THEN
NVL2(lod.actual date,
cast(lod.actual date AS nvarchar2(30)),
'N/A')
when pt.store status = 'planned' and
lod.scheduled date is null THEN
NVL2(lod.actual date,
cast(lod.actual date AS nvarchar2(30)),
'N/A')
when pt.store status = 'planned' and
lod.scheduled date < CURRENT_DATE THEN
NVL2(lod.actual date,
cast(lod.actual date AS nvarchar2(30)),
'Null')
when pt.store status = 'planned' and
lod.scheduled date >= CURRENT_DATE THEN
NVL2(lod.actual date,
cast(lod.actual date AS nvarchar2(30)),
'N/A')
end as DER_lod_ACT
from
product table pt,
event table pr,
event table pl,
event table ps,
event table fo,
event table fb,
event table fod,
event table lo,
event table lom,
event table lod
where
pt.product code = pr.product code
and pt.store code = pr.store code
and pt.product code = pl.product code
and pt.store code = pl.store code
and pt.product code = fo.product code
and pt.store code = fo.store code
and pt.product code = fb.product code
and pt.store code = fb.store code
and pt.product code = fod.product code
and pt.store code = fod.store code
and pt.product code = lo.product code
and pt.store code = lo.store code
and pt.product code = lom.product code
and pt.store code = lom.store code
and pt.product code = lod.product code
and pt.store code = lod.store code
and pr.product code=pl.product code
and pl.store code=ps.store code
and ps.product code=fo.product code
and fo.store code=fb.store code
and fb.product code=fod.product code
and fod.store code=lo.store code
and lo.product code=lom.product code
and lom.store code=lod.store code
and pr.event code=1001
and pl.event code=1002
and ps.event code=1003
and fo.event code=1004
and fb.event code=1005
and fod.event code=1006
and lo.event code=1007
and lom.event code=1008
and lod.event code=1009
order by product code,store code;
THANKS IN ADVANCE FOR SPARING YOUR TIME IN UNDERSTANDING MY PROVLEM....
REGARDS,
MYTHRI.986300 wrote:
from
product table pt,
event table pr,
event table pl,
event table ps,
event table fo,
event table fb,
event table fod,
event table lo,
event table lom,
event table lodabove is NOT valid SQL syntax -
Is there a way to reduce the length of the Timeline?
In Captivate 6, one of my slides has an audio track that is a minute and thirty seconds long. No elements will go beyond a minute-thirty. But the timeline is twenty minutes and thirty-two seconds long. If I zoom in to fine-tune some layers the scroll bar slider at the bottom gets incredibly small. It's a lot of wasted space. I'm looking for something like After Effects' "Reduce comp to work area" function. Does it exist in Captivate?
If nothing extends beyond a minute thirty, you could shorten the overall timeline by changing the Time setting in the general section of the Properties Inspector for the slide:
-
Video converters (or iTunes?) shortens the length of my movie?
I downloaded Disney Pixar's movie, "Up," & tried to convert it using "Videora" & "Any Video Converter," but everytime it converts, the video is shortened to 36 minutes. It is orignally one hour & 36 minutes. I don't know why it does that because when I play the movie in its original format, it's fine. Is there any way to fix this?
If on win or lin, try using handbrake it's best out there. I don't know what to use if you have OSX ...
-
Looping a short animated gif over the length of a movie ?
Hello,
I hope I have a good question here.
How would you suggest looping a very simple 3 frame .gif animation over the entire length of a 3 minute video ?
I have placed the gif animation on the timeline, and then positioned it as I want it to be, however, simply copy and pasting the video over and over again doesn't work, and adding it again from my bin, places the animation in the middle of my video, which is not where I want it.
Thank you for any suggestions on how to go about this.
Dave.You could try putting the overlay in a separate sequence with position etc as you wish, then make another sequence of several loops of the first sequence, and then use the longer version on the main timeline.
-
I added a personna 6/25/10, wanted to shorten the google navigation & search bars to see it but can't. Have re-installed the google tool bar, have selected the firefox tool bar version as my default and can then change the width but when one box gets shorter the other gets longer still filling the width of the screen. Customize tool bar doesn't give any options to shorten the tool bar width, I'm at a total loss. Would love suggestions if you've successfully fixed this.
== This happened ==
Every time Firefox opened
== 6-25-10The location bar and search bar have a flex property and take all available space.
You can only change the relative size of both with that resizer between the two bars.
You can only do that by adding a lot of Space elements in the View > Toolbars > Customize window.
You can set a fixed width by setting the min-width and max-width to the same value.
Add code to [http://kb.mozillazine.org/UserChrome.css userChrome.css] below the @namespace line.
See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#urlbar-container {max-width:400px!important; min-width:400px!important;}
#search-container {max-width:200px!important; min-width:200px!important;}
</nowiki></pre>
You can chose your own values as long as the min-width and max-width for each bar have the same value. -
How can i reduce the session length ?
Hi,
I am using weblogic 5.10 . The session length is too long , i think it
defaults to (52 bytes).
Is there anyway the length can be reduced to 8 bytes.
There is a property "weblogic.httpd.session.sessionIDLength=8 which is
supposed to reduce the
length. But this does not have any effect.
thanks,
Pat
"Pat" <[email protected]> wrote in message
news:3b310582$[email protected]..
> Hi,
> I am using weblogic 5.10 . The session length is too long , i think it
> defaults to (52 bytes).
> Is there anyway the length can be reduced to 8 bytes.
> There is a property "weblogic.httpd.session.sessionIDLength=8 which is
> supposed to reduce the
> length. But this does not have any effect.
>
> thanks,
> Pat
>
>
Hmmm, in WLS 6.0 you can set this in the web.xml deployment descriptor for
your web app with IDLength. You are correct, the default is 52 bytes, and
coincidentally enough 8 bytes is the minimum, max is Integer.MAX_VALUE. I
don't know if this will work in 5.1 (not much help huh?)
(weblogic.xml)
<session-descriptor>
<session-param>
<param-name>IDLength</param-name>
<param-value>8</param-value>
</session-param>
</session-descriptor>
-
How can I reduce the shaking of my animations?
I am using the move effect to move my images from one place to another. Then I scroll the window so the focus will stay on them, How I can reduce the shaking that those moves cost?
Here is a link for my application, just press continue after the loading is done.
http://gazman.000space.com
And another thing if know what program I need to learn so I be able to create SWF animations?You can't reduce the size that I know of but you can reduce the number by grouping them. Moving one icon on top of the other will create a folder. Also notice the horizontal scroll dots or swipe feature.
-
Modifying the length of a column list
Hi,
I need to maintain a MOSS 2007 site. It has an existing list with some columns to update. I need to reduce the length of these columns. Can I accomplish this operation with no impact on list data_
Fe, could I have a data truncation respect to these list columns?
Many thanksHi,
I seem to have been clear. I need to reduce the lenght of some list columns, thus to reduce the number of characters. The list is already existing and has some thousands of items.
In order to run a proof, I've modified the length (number of characters) of only one list column and then I've set the original length: the data saved inside the columns hasn't been truncated. So, I've noticed that setting the length of a list
column inside MOSS 2007 doesn't modify the pre-existing value, because doesn't modify the length of the corresponding column in the content database. Changing the lenght of a column affects only the input data operation in the MOSS list.
Bye -
How to remove extraneous noises with out reducing trak length?
I suppose my question is actually two. A recording I made in Logic Pro contains extraneous sounds of breathing through nose at the end of a lyric phrase and also ‘pops’ because I hadn’t used a shield. How do I eliminate these without reducing the length of the track?
Thanksanother option, if you need to edit these sounds out using the sample editor, is to make a cut on the audio region where the noise is. Like if it's at the tail end of a vocal phrase.
Make a cut right before, and right after that word, and then select that newly created audio region, and use the "Convert Regions to new audio files" found under the mini audio menu.
This way, any edit you make to this word, which as you discovered actually eliminates audio, thus shifting the WHOLE region forward, only happens to that edited word, and everything after that word remains in tact, and in it's original record position. -
How can I select adn enlarge the entire document/image on a page, reducing the the surrounding boarder? I can move the different text and image boxes around independently of each other but the outer most boarders of the main template block appear to be fixed. I thought I would be able to enlarge or reduce my document from 'page layout' but this does not seem possible.
Inspector > Document > Document Margins
The word is border. Boarders are the Harry Potters of this world.
Peter
Maybe you are looking for
-
How to get SAPRFC working on XAMPP 1.6.2? Try this.
Hi I have just managed to get SAPRFC working with XAMPP 1.6.2 (released on 29/05/2007). I noticed there was not much information on XAMPP in the PHP Development forum, so thought this might be useful for anyone who may wish to use it. I originally s
-
Formula variable / Replacement path issue
Hi Experts, I have a Field which has different status description. I want to bring the count of only one preferred description. Model Status A1 New A2 Open A3 New B1 Closed B2 Pending B3 New I want to view only the closed cou
-
Everyting was perfect earlier. Used to convert all my videos into iPhone mp4 format using Any Video Converter - then add it to my iPhone 3GS. But last few days, I cant add video files to iTunes. and the iTunes doesnt even specify the reason except fo
-
Will there be an iOS 7 for the Ipod 4
I was wondering if an iOS 7 is going to be out for the Ipod touch 4g I would love to have an exact kind of iOS 7 feel for it
-
Photos not migrating by books from iPhoto
Hi all, I've installed Photos, and gone through the migration process... but none of my projects and books have migrated! :-/ Any suggestions are welcome. Thanks. Regards, Jeppe iPhoto 9.6.1 Photos 1.0 MacOS X 10.10.3 Mac Mini (late 2012)