Reducing the vertical height of selection screen

Hi,
Is there any option by which we can reduce the vertical height of a selection screen.
Regards,
Anupam Yadav

Hi Anupam,
<li>Try this way.
REPORT ztest_notepad.
SELECTION-SCREEN BEGIN OF SCREEN 500.
PARAMETERS name TYPE sy-uname.
SELECTION-SCREEN END OF SCREEN 500.
CALL SELECTION-SCREEN '0500' STARTING AT 1 1 ENDING AT 100 100.
Thanks
Venkat.O

Similar Messages

How to Improve the performance in Variable Selection Screen.

Hi,
In Query Level we have Variable " User entry Defalt Valu". User want select particular value when he press "F4" it's take hours time how to improve the performance in Varaible Selection Screen.
Thanks in Advance.
Regards,
Venkat.

Dear Venkat.
You please try the following steps:
1. Say the InfoObject is 0EMPLOYEE against which you have created the variable, which user is trying to select value against, when they execute the report.
2. Goto RSA1-> InfoObject tab-> Select InfoObject 0EMPLOYEE.
3. Selcet the following options:
Query Execution Filter Val. Selectn - 'Only Posted Value for Navigation'
Filter Value Repr. At Query Exec. - 'Selector Box Without Values'
Please let me know if there is any more issue. Feel free to raise further concern
Thnx,
Sukdev K

How to make the obligate field in selection screen

Hi ,
In my report two radio buttons and two bloc selection screens are there.When we select the first radio button first screen will be editable second screen will be non-editable vice-versa.
but the problem is in each selection screen one mandatory field is required suppose if i give the one field obligatory in first block screen it is not allowing the second readout please help me regarding this how i will make the mandatory field in both screens.
Thanks,
Harinath

Hi...
Dont Declare your field as OBLIGATORY.
Instead perform the validation in AT SELECTION-SCREEN event. But validation should be only when Particular Radiobutton is selected.
And Generate only Error Message (Type E).
Try this code:
AT SELECTION-SCREEN on <yOUR mandatory field>.
 IF PA_UPD = 'X'.
 IF <YOUR MANDATORY FIELD> IS INITIAL.
 Message 'Entry is must in this field' type 'E'.
 ENDIF.
 ENDIF.
AT SELECTION-SCREEN OUTPUT.
IF pa_udp = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC'. "#CCE
screen-active = 1.
ELSEIF screen-group1 = 'DEF'.
screen-input = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF pa_rep = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC'. "#CCE
screen-input = 0.
ELSEIF screen-group1 = 'DEF'.
screen-active = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
Reward if Helpful

How to get two parameters in the same line of selection screen?

hello
i need to get my selection csreen like bellow.
r1 radiobuttion -some space --p1 parameter
i should not get the parameter in the next line of radiobuttion.
how to get two parameters in the same line of selection screen?

hi....
modify the following code
it will work
SELECTION-SCREEN BEGIN OF BLOCK SL1 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(15) TEXT-001
FOR FIELD P1.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS : P1 TYPE C USER-COMMAND R2 RADIOBUTTON GROUP R2 DEFAULT 'X',
P2 TYPE SCARR-CARRNAME,
P3 TYPE CHAR1 RADIOBUTTON GROUP R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK SL1.

How to color the text element in selection screen

hi,
i am going to pass some text element in selection screen output and my requiremnt is text element should be given some colour.
plz guide me.
regards
muthuraman.d

Hi...
Dont Declare your field as OBLIGATORY.
Instead perform the validation in AT SELECTION-SCREEN event. But validation should be only when Particular Radiobutton is selected.
And Generate only Error Message (Type E).
Try this code:
AT SELECTION-SCREEN on <yOUR mandatory field>.
 IF PA_UPD = 'X'.
 IF <YOUR MANDATORY FIELD> IS INITIAL.
 Message 'Entry is must in this field' type 'E'.
 ENDIF.
 ENDIF.
AT SELECTION-SCREEN OUTPUT.
IF pa_udp = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC'. "#CCE
screen-active = 1.
ELSEIF screen-group1 = 'DEF'.
screen-input = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF pa_rep = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC'. "#CCE
screen-input = 0.
ELSEIF screen-group1 = 'DEF'.
screen-active = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
Reward if Helpful

Scanning: The image size is too big. Please reduce the image height, width, resolution, scaling or output type.

Good Day.
I have recently discovered an issue with scanning. I have tried scanning straight from the printer, through image capture, and through preview. All yeilding the same results since they are essentailly kicking off the same scanning applet. I can scan a jpeg formatted file as long as I applet is in the "Hide Details" mode. If I click on the "Show Details" button, which I need to do to scan to PDF, I immediately receive an error stating: The image size is too big. Please reduce the image height, width, resolution, scaling or output type.
I'm currently using an HP C5180 printer.   The most recently installed software was Adobe Digital Editions (I installed this to read an on-line e-book). Not sure if there is any correlation.    Thanks for any help.
Mac details are:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,1
Processor Name:          Intel Core i5
Processor Speed:          2.3 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache (per Core):          256 KB
L3 Cache:          3 MB
Memory:          8 GB
Boot ROM Version:          MBP81.0047.B27
Printer access log:
Source:          /var/log/cups/access_log
Size:          174 bytes
Last Modified:          11/21/12 10:09 PM
Recent Contents:          localhost - - [21/Nov/2012:22:09:16 -0500] "POST / HTTP/1.1" 200 61628 CUPS-Get-PPDs -
localhost - - [21/Nov/2012:22:09:20 -0500] "POST / HTTP/1.1" 200 61628 CUPS-Get-PPDs -
Image Capture Support:
Image Capture Support:
Path:          /Library/Image Capture/Support/Hewlett-Packard/Devices/HPAiOScan.bundle/Contents/Info.plist
Version:          2.3.0
Path:          /Library/Image Capture/Support/Hewlett-Packard/Devices/HPAiOScan.bundle/Contents/Resources/Dev iceInfo.plist
Version:          2.3.0
Photosmart C5100 series:
Status:          Idle
Print Server:          Local
Driver Version:          4.0.0
Default:          Yes
Shared:          No
URI:          dnssd://Photosmart%20C5100%20series%20%5B960B9E%5D._pdl-datastream._tcp.lo cal./?bidi
PPD:          HP Photosmart C5100 series
PPD File Version:          4.0.0
PostScript Version:          (3011.104) 0
CUPS Version:          1.6svn (cups-327)
Scanning support:          Yes
Scanning app (bundleID path):          -
Scanning app version:          -
Scanner UUID:          CC8DD435-CC8D-D435-CC8D-D435CC8DD435
Printer Commands:          ReportLevels
CUPS filters:
Inkjet:
Path:          /Library/Printers/hp/cups/Inkjet.driver/Contents/MacOS/Inkjet
Permissions:          rwxr-xr-x
Version:          4.0.0
commandtohp:
Path:          /Library/Printers/hp/cups/filters/commandtohp.filter/Contents/MacOS/comman dtohp
Permissions:          rwxr-xr-x
Version:          2.1.1
Fax support:          No
Printer utility:          /Library/Printers/hp/Utilities/HP Utility.app
Printer utility version:          5.9.1
PDEs:
PDE.plugin:
Sandbox compliant:          Yes

Hello Sig
The scanner works with a Windows computer, which proves the device is functional at a cursory level. The drivers are now distributed by Apple and this is an Apple computer. There is no scanning software provided by HP. HP's answer is that Mountain Lion takes care of all of this. I anticipate that some setting or driver was somehow tweaked since the scanner had been working with Mountain Lion until a few days ago. The device in question is an Apple product. So, I'm pretty confident that I'm in the right place.
Regards

How to reduce the row height

Hi All,
Is it possible to reduce the row height of a table.Actually the font is small and the row height is more.I dont want to redcuse the width only row height.
Regards,
Amrit

does anyone of u havea ny idea on how to achiieve this.

Reduce the tab height in pixels for FF29

I have read all the threads her eon the forums. I have tried the addons. I have googled, and googled and googled.
Is there a way to reduce the height of the tabs in terms of pixels or not?
I have edited my css file. I have tried the classic theme restorer and other.
I like the overall look of FF29. I just want want the tabs the same height as they were in FF28 in terms of pixel height.
This affects all my computers running both Linux and Windows 7 Pro.

There is a min-height: 31px set that you need to override by specifying a lower value and adding the !important flag.
<pre><nowiki>#tabbrowser-tabs {
height:26px!important;
min-height: 26px !important;
.tab-background-start[selected=true]::after,
.tab-background-start[selected=true]::before,
.tab-background-start,
.tab-background-end,
.tab-background-end[selected=true]::after,
.tab-background-end[selected=true]::before {
min-height: 26px !important;
}</nowiki></pre>
See chrome://browser/skin/browser.css
<pre><nowiki>#tabbrowser-tabs {
min-height: 31px;
.tab-background-start[selected=true]::after,
.tab-background-start[selected=true]::before,
.tab-background-start,
.tab-background-end,
.tab-background-end[selected=true]::after,
.tab-background-end[selected=true]::before {
min-height: 31px;
width: 30px;
}</nowiki></pre>

How to reduce size of image in Selection Screen

Hi all
I am trying to add an image in Selection screen and i want to reduce size of image .
Please help me asap.
Thanks & Regards
Shaveta

Hi Prashat
I tried by reducing the size of container , But scroll bars appears automatically .
The size of Picture remains same .
Please tell me if there is any option to fix the size of container ... so that picture reduces its size automatically .
Thanks & Regards
Shaveta

Passing the values from one selection screen to another report

Hi all,
This is my requirement...
I need to hav a selection screen with various input parameter along with 3 radio buttons...
If i enter the values and select say first radiobutton the corresponding called program needs to be executed .
NOTE :
1)The called program selection screen needs to be skipped
2) the values entered in the calling program needs to be passed to the called program and the output of the called program needs to be displayed.
3)the selection screen is the same for both calling and called program
Can anyone plz help in this regard?
Regards,
Gowri Shankar

Hi...
Use the statement
SUBMIT zps_called_report WITH SELECTION-TABLE seltab.
see the following link....
http://help.sap.com/saphelp_nw04s/helpdata/en/9f/dba51a35c111d1829f0000e829fbfe/frameset.htm
Hope it helps you...
Let me know if u have any more doubt...
Reward points if useful......
Suresh.......

How to change the text in default selection screen

Hi,
I have created the default selection screen(using PNP Logical database) ,In that I wants to display 'Data Selection Period' instead of 'Period'.
Please send me the related code.
Thanks in advace
mohan

HR Logical Database is PNP
Main Functions of the logical database PNP:
Standard Selection screen
Data Retrieval
Authorization check
To use logical database PNP in your program, specify in your program attributes.
Standard Selection Screen
Date selection
Date selection delimits the time period for which data is evaluated. GET PERNR retrieves all records of the relevant infotypes from the database. When you enter a date selection period, the PROVIDE loop retrieves the infotype records whose validity period overlaps with at least one day of this period.
Person selection
Person selection is the 'true' selection of choosing a group of employees for whom the report is to run.
Sorting Data·
The standard sort sequence lists personnel numbers in ascending order.
· SORT function allows you to sort the report data otherwise. All the sorting fields are from infotype 0001.
Report Class
· You can suppress input fields which are not used on the selection screen by assigning a report class to your program.
· If SAP standard delivered report classes do not satisfy your requirements, you can create your own report class through the IMG.
regards
vinod

How to change the description of a selection screen

Hi , I created a selection screen with the description as 'Test' , now the program has grown real big . I want to change the desccription to something else as it shows at the top of the selection screen. Can this be done with out copying the program to a new progarm with a new description. I mean , is there a way to change the current description .
Thank you .

Hi
in SE38 Enter the program name.
Select the Radio button Attributes.
Change the Title of the Program.
This title will appear in the selection screen as well as the list by default.
We can also set this TITLE dynamically using the command.
SET TITLE-BAR 'T1'. "double click on T1 and create (Activate) it.
reward if Helpful.

How to maximise the length of the Parameter text on Selection screen

Hello,
I am putting the text in the selection screen for a Parameter.
Its text is long and it is not letting me to put the whole text in Text Symbol.
In the report
When I click on GOto--> Text Elements --> Selection Texts
I am sure there is a way we can maximise this...
ANy suggestions will be apprecaiated.
Regards,
Kittu

Hello,
Thank you for all your response!
Here is my code :
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME.
PARAMETERS : BOTH RADIOBUTTON GROUP RG1,
EXICLASS RADIOBUTTON GROUP RG1.
SELECTION-SCREEN END OF BLOCK B2.
Here for Both, I need to add the selction text as 'BOTH Existing and Non-existing Classifications'
This is a parameter, can any body explain me how to do it with the Parameters.
Any suggestions will be appreciated.......
Regards,
Kittu

Dynamic Data selection for the Filed entered in Selection Screen.

Hi All,
My requirement is as follows.
1 select options in Selection Screen for MATNR (SO_MATNR)
1 parameter field in Selection Screen for entering a MARC field name. (P_FIELD)
Now the Program has to display the values of this Field (Entered by the user as P_FIELD) from MARC table, where MATNR is in SO_MATNR.
I understand that this would require a dynamic select statemant but could not figure out the correct way.
Please help me with the code for this requirement
Regards,
Sunil

Not sure If I understand correct, but here's an example on what I think you are looking for. I don't have an ECC system here (we're on CRM), but you should adept it to your tables and fieldname.
TABLES: but000.
DATA: lt_feld TYPE TABLE OF name_feld,
lw_feld LIKE LINE OF lt_feld.
SELECT-OPTIONS: so_part FOR but000-partner.
PARAMETERS: field TYPE name_feld DEFAULT 'MC_NAME1'.
SELECT (field) FROM but000
INTO TABLE lt_feld
WHERE partner IN so_part.
LOOP AT lt_feld INTO lw_feld.
WRITE:/1 lw_feld.
ENDLOOP.

F.01 (RFBILA00) not taking the period specified on selection screen for com

Hi Experts,
Whenever we execute this report, it always takes the output from the start of the year. It does not take into account the u201Cfromu201D and u201CTou201D period which we specify on the selection screen.
How to modify this report? Not able to find any relevant OSS note for it.
Cheers,
Nand

Hi,
In this report, go to tab u201CSpecial Evaluationu201D and give the u201CBalance Sheet Typeu201D as 2 Flow of funds analysis
The system by default takes the type as 1 Standard financial statement, which means that an accumulated balance sheet is created, that is, the balance is calculated from the balance carried forward plus the periods 01 to the upper limit of the reporting and comparison periods you have specified.
u201CBalance Sheet Typeu201D as 2 Flow of funds analysis means that a flow of funds analysis is created, that is, the balance is calculated from the reporting and comparison periods you specified.
Regards,
Gaurav

Reducing the vertical height of selection screen

Similar Messages

Maybe you are looking for