Reference table data across different tables

Hi all,
is really impossible to have some table call the content of a cell in another table with Pages 2.0.2?
Thanks in advance,
Filippo

No one has found a way of doing it, and the question has appeared repeatedly in this forum, so yes, it is likely impossible.

Similar Messages

How to display multiple data from different table in one table? please help

Hi
I got sun java studio creator 2(the separate installation not the one in the net beans)....
My question is about displaying data that have been taken from the database.... I know how to display data in a table(just click on the table "bind data" )... but my question is that:
when i want to use a sql statement that taken the data from different table...
how can i display that data in the table(that will be shown in the web) ??? when i click bind data on the table i can only select one table i can't select more than one....
Note:
1) i'm using the rowset for displaying the data in the table, since the sql statement is depending on a condition(i.e. select a from b where c= ? )...
2) i mean by different table is that( i.e. select a from table1,table2 )..
thanks in advance...

Hi,
937440 wrote:
Hi every one, this is my first post in this portal. Welcome to the forum!
Be sure to read the forum FAQ {message:id=9360002}
I want display the details of emp table.. for that I am using this SQL statement.
select * from emp where mgr=nvl(:mgr,mgr);
when I give the input as 7698 it is displaying the corresponding records... and also when I won't give any input then it is displaying all the records except the mgr with null values.
1)I want to display all the records when I won't give any input including nulls
2)I want to display all the records who's mgr is null
Is there any way to incorporate to include all these in a single query..It's a little unclear what you're asking.
The following query always includes rows where mgr is NULL, and when the bind variable :mgr is NULL, it displays all rows:
SELECT *
FROM     emp
WHERE     LNNVL (mgr != :mgr)
;That is, when :mgr = 7698, it displays 6 rows, and when :mgr is NULL it displays 14 rows (assuming you're using the Oracle-supplied scott.emp table).
The following query includes rows where mgr is NULL only when the bind variable :mgr is NULL, in which case it displays all rows:
SELECT     *
FROM     emp
WHERE     :mgr     = mgr
OR      :mgr      IS NULL
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL it displays 14 rows.
The following query includes rows where mgr is NULL only when the bind variab;e :mgr is NULL, in which case it displays only the rows where mgr is NULL. That is, it treats NULL as a value:
SELECT     *
FROM     emp
WHERE     DECODE ( mgr
            , :mgr, 'OK'
            )     = 'OK'
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL, it displays 1 row.

Retriving of data from different tables

retriving of data from different tables depening of the primary key this key field is there in all tables if it is there in one v table it should continue to other tables otherwise it should get exit from that it should display information message or otherwise success message if it is there in all tables .

Im writing the concept, just check it.
SELECT * from kna1 into lt_kna1.
if sy-subrc eq 0.
selest * from lfa1 into lt_lfa1
for all entries in lt_kna1.
endif.

Fetch data from different tables print them is assigned places

Hi Friends,
I have designed one SMART-Form (Receipt).
I need to fetch data from different tables and the data must be print in assigned places. Please help me how to achieve this requirement. Thanks for your help.
Best regards,
Manju.
Edited by: Alvaro Tejada Galindo on Feb 12, 2008 10:20 AM

U're right.
When it creates a smartform it needs to decide when the main data have to be extracted:
- or in driver program
- or in smartforms
The difference can be in the performance, because the program can select the data only once, the smartforms needs to extract them everytime it's called.
I prefer to use a complex structure for the smartform interface as so all data I need are in only one structure, the problem is the complex structure is harder to be managed.
Max

Procedure to check data from different tables

Hi
I am trying to write a procedure to compare data from a table with another.
Table 1
ID Name Dept
1 ABC Y
2 DEF Z
Table 2
ID Dept
1 Y
2 Z
Table 3
Name ID
1 ABC
2 DEF
I would like to compare each record data in Table 1 with data from different tables table2,table3 by matching ID,name.... Please help me with how I could start writing a procedure and also spool data that does not match from the table1 with other tables
thanks
Edited by: 890563 on Apr 30, 2012 10:34 AM

Hope below helps you.
CREATE TABLE TABLE1
(    ID          VARCHAR2(10),
     FIRST_NAME VARCHAR2(30),
     LAST_NAME   VARCHAR2(30),
     MIDDLE_NAME VARCHAR2(30)
INSERT INTO TABLE1 VALUES('123456','testfirst','testlast','testmiddle');
INSERT INTO TABLE1 VALUES('123457','testfirst1','testlast1','testmiddle1');
CREATE TABLE TABLE1
(    ID          VARCHAR2(10),
     FIRST_NAME VARCHAR2(30),
     LAST_NAME   VARCHAR2(30),
     MIDDLE_NAME VARCHAR2(30)
INSERT INTO TABLE2 VALUES('123456','testfirst','testlas','testmidd');
INSERT INTO TABLE2 VALUES('123457','testfirst2','testlast1','testmiddle1');
SELECT TABLE1.ID,
        -- Match First Name
     CASE WHEN TABLE1.FIRST_NAME != TABLE2.FIRST_NAME THEN TABLE1.FIRST_NAME ELSE NULL END TABLE1_FIRST_NAME,
     CASE WHEN TABLE1.FIRST_NAME != TABLE2.FIRST_NAME THEN TABLE2.FIRST_NAME ELSE NULL END TABLE2_FIRST_NAME,
        -- Match Middle Name
     CASE WHEN TABLE1.MIDDLE_NAME != TABLE2.MIDDLE_NAME THEN TABLE1.MIDDLE_NAME ELSE NULL END TABLE1_MIDDLE_NAME,
        CASE WHEN TABLE1.MIDDLE_NAME != TABLE2.MIDDLE_NAME THEN TABLE2.MIDDLE_NAME ELSE NULL END TABLE2_MIDDLE_NAME,
        -- Match Last Name
     CASE WHEN TABLE1.LAST_NAME != TABLE2.LAST_NAME THEN TABLE1.LAST_NAME ELSE NULL END TABLE1_LAST_NAME,
        CASE WHEN TABLE1.LAST_NAME != TABLE2.LAST_NAME THEN TABLE2.LAST_NAME ELSE NULL END TABLE2_LAST_NAME
FROM TABLE1, TABLE2
WHERE TABLE1.ID = TABLE2.ID
ID         TABLE1_FIRST_NAME TABLE2_FIRST_NAME TABLE1_MIDDLE_NAME TABLE2_MIDDLE_NAME TABLE1_LAST_NAME   TABLE2_LAST_NAME
123456     NULL               NULL               testmiddle         testmidd           testlast        testlas
123457     testfirst1         testfirst2         NULL               NULL               NULL            NULL
{code}

Create one tables from 2 different tables

Hi,
How I can create one table from 2 different tables. Source tables have data and I want to include it in new table.
I try this:
create table NEW_ONE
select * from OLD_ONE
union
select * from OLD_ONE2;
But it didn't work correctly :/

I don't have any error. This syntax create table NEW_ONE, but this table have columns only from OLD_ONE table :/ There aren't any column from OLD_ONE2 :/ Any suggestions?
I don't forget about "as" in my query, only in this post.
Edited by: tutus on Sep 8, 2008 6:36 AM

How to insert one table data into multiple tables by using procedure?

How to insert one table data into multiple tables by using procedure?

Below is the simple procedure. Try the below
CREATE OR REPLACE PROCEDURE test_proc
AS
BEGIN
INSERT ALL
INTO emp_test1
INTO emp_test2
SELECT * FROM emp;
END;
If you want more examples you can refer below link
multi-table inserts in oracle 9i
Message was edited by: 000000

How to insert a table data into temporary table

Hi
Can anyone help me to insert a table data into temporary table.
Thanks
Navin

If you could provide a (simplified) example of the data you have and the output you're attempting to get, that would probably be quite helpful. I'm not sure that I understand exactly what you're trying to do here...
1) It sounds like you know the structure of the result set you're trying to generate. So it would be possible to create a temporary table once (at the same time that you create all your other tables) and write procedural PL/SQL code that would step through the data, write data to the temp table, select the data out of the temp table, and return a REF CURSOR. That would tend not to be the way that an Oracle developer would do things (there are exceptions, of course), but it would work.
2) I don't see any inherent problems in using sub-selects and inline views to do whatever aggregation you're trying to do on the secondary tables, which would allow you to get the output in a single query. For example, given an ORDERS table and an ORDER_DETAILS table,
SELECT o.customer_id, o.invoice_number, SUM( od.line_item_cost ) total_cost
FROM orders o,
order_details od
WHERE o.order_id = od.order_id
GROUP BY o.customer_id, o.invoice_number3) If you do need to use procedural logic, I would tend to look into the use of pipelined table functions or to read the data into an in-memory collection and to manipulate and return that collection.
Justin

How can we delete SID table data and Text table data

Hi,
How can we delete SID table data and Text table data of any
InfoObject.

Hi,
Go to transaction SE14, give the technical name if the table:
/BIC/T<InfoObject Name> for Text Table
/BIC/S<InfoObject Name> for SID Table
Select "Table" in the given 4 options below & hit Edit button.
in the next screen select "Direct"
& also select "detele data" radio button.
& hit "Activate & adjust database".
this will delete the complete data from the tables.
Note: before deleting the SID's make sure of the consequences & after effects.
Also the SID gets generated the next time you load master data/transaction data only for those records which were loaded..
Regards,
Iliyas

Data from one table shown on different table

Back again...I am working on a budget sheet. I thought I had a good plan for a way to deal with my different budget categories. I have, on one sheet, several small tables that keep a running account of my money in various budget line items (mortgage, utilties, grocery, etc...).
My plan was to take the running total of one table and insert it into a master list of all budget categories. I thought I could do this easily with a simple command of making one cell just equal another cell. But then two problems surfaced.
First, and by far I think the biggest problem, is that I don't know how to tell one cell on one table to grab data from another cell on a different table.
Is there a way?
Second, since the smaller individual tables are running....even though I have a footer that serves as the base, continuing total...every time I add a row to that table, the bottom row will grow by 1. So, I am not sure (in fact I doubt it can be done), is there a way to tell the summary table to always know where the running, final total is on any given table?
I suppose, finally, if there is some other easier way to do this, I would appreciate the collective wisdom of the group.
Oh, I am working in old Numbers '08. Should have said that first. Thanks in advance.

To make a refernce to a cell in a different table is the same as making one from the same table. When it is time to make a cell reference, click on the cell in the other table. If it is on a different sheet, first click on the other table in the sidebar (I assume '08 has a sidebar on the left), then click on the cell. Or you can type it in as sheetname::tablename::celladdr.
If the cell you want to reference is in a footer, a formula like =Sheet 1::Table 1::B2 will do the trick. When you add a new row to the table, the reference will adjust so it keeps pointing at the cell in the footer.

Report using Data from different tables

Hello,
I am trying to convert a Cobol batch program to Oracle 6i tabular report.
The data is fetched from many different tables and there are lots of processing(i.e, based on the value of a column from one table need additional processing from different tables) required to generate the desired columns in the final report.
I would like to know what is the best strategy to follow in Oracle Reports 6i. I heard that CREATE GLOBAL TEMPORARY TABLE is an option. ( or REF CURSOR ?) I do not know much about its usage. Can somebody guide me about this or any other better way to achieve the result.
Thank you in advance
Priya

Hello,
There are many, many options available to you, each of which has advantages and disadvantages. This is why it is difficult to answer "what is best?" without alot more details about your specific circumstances.
In general, you're going to be writing PL/SQL to do any conditional logic that cannot be expressed as pure SQL. It can executed in the database, or it can executed within Reports itself. And most reports developers do some of both.
As a general rule, you want to send only the data you need from the database to the report. This means you want to do as much filtering and aggregating of the data as is readily possible within the database. If this cannot be expressed as plain SQL queries, then you'll want to create a stored procedures to help do this work.
Generally, the PL/SQL you create for executing within the report should be focused on control of the formatting, such as controlling whether a field is visible, or controlling display attributes for conditional formatting.
But these are not hard and fast rules. In some cases, it is difficult to get all the stored procedures you might like installed into the database. Perhaps the dba is reluctant to let you install that many stored procedures. Perhaps there are restrictions when and how often updates can be made to stored procedures in a production database, which makes it difficult to incrementally adjust your reports based on user feedback. Or perhaps there are restrictions for how long queries are allowed to run.
So, Reports offers lots of options and features to let you do data manipulation operations from within the report data model.
In any case, Oracle does offer temporary table capabilities. You can populate a temp table by running stored procedures that do queries, calculations and aggregations. And you can define and initiate a dynamic query statement within the database and pass a handle to this query off to the report to execute (ref cursor).
From the reports side, you can have as many queries as you want in the data model, arranged in any hierarchy via links. You can parameterize and change the queries dynamically using bind variables and lexicals. And you can add calculations, aggregations, and filters.
Again, most people do data manipulation both in the database and in Reports, using the database for what it excels at, and Reports for what it excels at.
Hope this helps.
Regards,
The Oracle Reports Team --skw

Retrieving data from different tables in the same time crash

Hi
this is probably the wrong way to do it, but this is how I did:
- I wanted a screen with 3 datagrids components retrieving data from 3 different tables.
- I could make it work while enabling 1 or 2 of them. When the 3 are enabled, I get this error:
btw its a huge msg, I will trim it:
ArgumentError: Can't find ManagedQuery or ManagedOperation named: getItems_paged at mx.data::RPCDataServiceAdapter/executeQuery()[C:\depot\DataServices\branches\lcds_modeler 101\frameworks\projects\data\src\mx\data\RPCDataServiceAdapter.as:325] at mx.data::RPCDataServiceAdapter/processDataMessage()[C:\depot\DataServices\branches\lcds_m odeler101\frameworks\projects\data\src\mx\data\RPCDataServiceAdapter.as:920] at RPCDataServiceRequest/invoke()[C:\depot\DataServices\branches\lcds_modeler101\frameworks\ projects\data\src\mx\data\RPCDataServiceAdapter.as:1668] at mx.data::DataStore/http://www.adobe.com/2006/flex/mx/internal::invoke()[C:\depot\DataServices\branches\lcds_m odeler101\frameworks\projects\data\src\mx\data\DataStore.as:3343] ... it continues forever.
the getItems_paged is a auto generated function inside the php class flex generates to handle the tables.
Each of the datagrid is a custom component. I made so to avoid keeping a bunch of code lines in the main 'page'.
Any suggestion to make it work smoothly?
Thanks in advance,
btp~

Hi
this is probably the wrong way to do it, but this is how I did:
- I wanted a screen with 3 datagrids components retrieving data from 3 different tables.
- I could make it work while enabling 1 or 2 of them. When the 3 are enabled, I get this error:
btw its a huge msg, I will trim it:
ArgumentError: Can't find ManagedQuery or ManagedOperation named: getItems_paged at mx.data::RPCDataServiceAdapter/executeQuery()[C:\depot\DataServices\branches\lcds_modeler 101\frameworks\projects\data\src\mx\data\RPCDataServiceAdapter.as:325] at mx.data::RPCDataServiceAdapter/processDataMessage()[C:\depot\DataServices\branches\lcds_m odeler101\frameworks\projects\data\src\mx\data\RPCDataServiceAdapter.as:920] at RPCDataServiceRequest/invoke()[C:\depot\DataServices\branches\lcds_modeler101\frameworks\ projects\data\src\mx\data\RPCDataServiceAdapter.as:1668] at mx.data::DataStore/http://www.adobe.com/2006/flex/mx/internal::invoke()[C:\depot\DataServices\branches\lcds_m odeler101\frameworks\projects\data\src\mx\data\DataStore.as:3343] ... it continues forever.
the getItems_paged is a auto generated function inside the php class flex generates to handle the tables.
Each of the datagrid is a custom component. I made so to avoid keeping a bunch of code lines in the main 'page'.
Any suggestion to make it work smoothly?
Thanks in advance,
btp~

Insert data from a table into 5 different tables

My application has a data block than display information from another table. From this data block, the user has the option to select the records for upload. The information in the data block is used to insert data into 5 different tables. So if any exception occurs while inserting, the whole process should be rollback, but before this happen a record is inserting in a failed table indicated the reason of the failed.
For this process I use the following commands:
1.     sp_name := Get_Application_Property(SAVEPOINT_NAME);
2.     INSERT DDL
3.     INSERT DDL
4.     INSERT DDL
5.     INSERT DDL
6.     INSERT DDL
7.     If Other Exception then ISSUE_ROLLBACK(sp_name) Otherwise FORMS_DDL ('commit')
The problem the previous insert(s) rollback
Thanks,

Hi,
If you are using FORMS_DDL built-in to insert the data, then after each FORMS_DDL statement, you have to check the values of FORM_SUCCESS or FORM_FAILURE built-ins.
FORMS_DDL('<insert_statement_1>');
IF FORM_FAILURE THEN
<the statement fails. so have to be rollbacked>
END IF;
FORMS_DDL('<insert_statement_2>');
IF FORM_FAILURE THEN
<the statement fails. so have to be rollbacked>
END IF;Hope this helps.
Regards,
Manu.
If my response or the response of another was helpful or Correct, please mark it accordingly

How do I reference cells from a different table/ sheet in the same document

Say I have a Sheet that contains two Tables: [A] and . Is it possible to cross-reference the content of a cell in Table [A] from Table and use it to create a function in Table ?
Eg: =SUM[TableA(K20)]+[TableB(F20:F50)]
Could I similarly cross-reference the content of cells in Tables in different Sheets?
Thanks,
Seb

Seb,
Yes, you can. With the cursor in the location where you want to place the external reference, navigate to your Sheet and Table of choice and click the cell that you wish to reference. The external reference will appear in the formula.
Note however that we are talking about different sheets in the same Numbers file. We can't reference sheets or tables in other files.
Jerry
Message was edited by: Jerrold Green1

Export & Import internal table data across the programs

Hi All,
I have two different reports,let say ZPRO1 & ZPRO2. I want to export internal table data of ZPRO1 to ZPRO2 and then I want to do some calculations in ZPRO2 with the imported internal table data(ZPRO1).
If I use 'SUBMIT' or CALL TRANSACTION syntax ZPRO1 is displaying..but I want to use only internal table data of ZPRO1.
Pls advise.
Pranitha.

Hi,
Please follow the simple code and try to solve your issue.
Code in program1
types: begin of ty_itab,
       matnr type matnr,
       end of ty_itab.
data: it_itab type table of ty_itab,
      wa_itab type ty_itab,
      it_itab1 type table of ty_itab.
select matnr from mara into table it_itab.
export it_itab to shared buffer indx(st) id 'ABC'.
Code in program2
types: begin of ty_itab,
       matnr type matnr,
       end of ty_itab.
data: it_itab type table of ty_itab,
      wa_itab type ty_itab.
import it_itab from shared buffer indx(st) id 'ABC'.
loop at it_itab into wa_itab.
write:/ wa_itab-matnr.
endloop.
Please delete shared buffer indx(st) id 'ABC', once we don't need the internal table data.
Regards
Dande

Reference table data across different tables

Similar Messages

Maybe you are looking for