Data from one table shown on different table
Back again...I am working on a budget sheet. I thought I had a good plan for a way to deal with my different budget categories. I have, on one sheet, several small tables that keep a running account of my money in various budget line items (mortgage, utilties, grocery, etc...).
My plan was to take the running total of one table and insert it into a master list of all budget categories. I thought I could do this easily with a simple command of making one cell just equal another cell. But then two problems surfaced.
First, and by far I think the biggest problem, is that I don't know how to tell one cell on one table to grab data from another cell on a different table.
Is there a way?
Second, since the smaller individual tables are running....even though I have a footer that serves as the base, continuing total...every time I add a row to that table, the bottom row will grow by 1. So, I am not sure (in fact I doubt it can be done), is there a way to tell the summary table to always know where the running, final total is on any given table?
I suppose, finally, if there is some other easier way to do this, I would appreciate the collective wisdom of the group.
Oh, I am working in old Numbers '08. Should have said that first. Thanks in advance.
To make a refernce to a cell in a different table is the same as making one from the same table. When it is time to make a cell reference, click on the cell in the other table. If it is on a different sheet, first click on the other table in the sidebar (I assume '08 has a sidebar on the left), then click on the cell. Or you can type it in as sheetname::tablename::celladdr.
If the cell you want to reference is in a footer, a formula like =Sheet 1::Table 1::B2 will do the trick. When you add a new row to the table, the reference will adjust so it keeps pointing at the cell in the footer.
Similar Messages
-
Copying large amount of data from one table to another getting slower
I have a process that copies data from one table (big_tbl) into a very big archive table (vb_archive_tbl - 30 mil recs - partitioned table). If there are less than 1 million records in the big_tbl the copy to the vb_archive_table is fast (-10 min), but more importantly - it's consistant. However, if the number of records is greater than 1 million records in the big_tbl copying the data into the vb_archive_tbl is very slow (+30 min - 4 hours), and very inconsistant. Every few days the time it takes to copy the same amount of data grows signicantly.
Here's an example of the code I'm using, which uses BULK COLLECT and FORALL INSERST to copy the data.
I occasionally change 'LIMIT 5000' to see performance differences.
DECLARE
TYPE t_rec_type IS RECORD (fact_id NUMBER(12,0),
store_id VARCHAR2(10),
product_id VARCHAR2(20));
TYPE CFF_TYPE IS TABLE OF t_rec_type
INDEX BY BINARY_INTEGER;
T_CFF CFF_TYPE;
CURSOR c_cff IS SELECT *
FROM big_tbl;
BEGIN
OPEN c_cff;
LOOP
FETCH c_cff BULK COLLECT INTO T_CFF LIMIT 5000;
FORALL i IN T_CFF.first..T_CFF.last
INSERT INTO vb_archive_tbl
VALUES T_CFF(i);
COMMIT;
EXIT WHEN c_cff%NOTFOUND;
END LOOP;
CLOSE c_cff;
END;
Thanks you very much for any advice
Edited by: reid on Sep 11, 2008 5:23 PMAssuming that there is nothing else in the code that forces you to use PL/SQL for processing, I'll second Tubby's comment that this would be better done in SQL. Depending on the logic and partitioning approach for the archive table, you may be better off doing a direct-path load into a staging table and then doing a partition exchange to load the staging table into the partitioned table. Ideally, you could just move big_tbl into the vb_archive_tbl with a single partition exchange operation.
That said, if there is a need for PL/SQL, have you traced the session to see what is causing the slowness? Is the query plan different? If the number of rows in the table is really a trigger, I would tend to suspect that the number of rows is causing the optimizer to choose a different plan (with your sample code, the plan is obvious, but perhaps you omitted some where clauses to simplify things down) which may be rather poor.
Justin -
MySQL move date from one table to another
I was wondering if there is a MySQL command that will let me move a selected row of data from one table to another. both tables have the same columns and declaration type (one table is actually an archived table on old data)
example
I wasnt to move all data in Table1 where the date is greater than 30 days old to Table 2
-- so the result should be...import all rows to Table 2 where the date is greater than 30 days old..and delete all date from Table 1 that is greater than 30 days.
currently..I'm doing three process
1) get all row that is greater than 30 days
"SELECT * FROM Table1 WHERE TO_DAYS(NOW()) - TO_DAYS(dateField) > 30"
2) insert data into Table2
while (res.hasNext())
TableData data = ..... // .get row
dataList.add(data);
for (int i = 0; i < dataList.size(); i++){
pstm.setString.....
pstm.addBatch()
pstm.executeBatch();
3) delete data from Table1
"DELETE FROM Table 1 WHERE TO_DAYS(NOW()) - TO_DAYS(dateField) > 30"for this app..losing a few rows does not
impact on how we analyze the data.That's what everyone always tells me too. But 99% of the time they come back and want to know why the cannot balance and/or validate the data between two runs taken only minutes from each other.
I've seen people puzzle over data for days that they swear they ran the exact same utility for their tests, but they were in fact using live data, and additional data had accrued but since all they had to do was execute the a script without parameters (they didn't put in a stop time), they got two different answers and it always, and I mean always confuses people. Be safe, and put the option in for and end date/time, then when they waste days trying to figure out why the two different observations gave them different numbers, they cannot blame you (because you gave them the option)!
My 2 cents for the day... -
Adding Data From One Table to Another
Now, this doesn't strike me as a particularly complex problem, but I've either strayed outside the domain of Numbers or I'm just not looking at the problem from the right angle. In any case, I'm sure you guys can offer some insight.
What I'm trying to do is, essentially, move data from one table to another. One table is a calendar, a simple two column 'date/task to be completed' affair, the other is a schedule of jogging workouts, i.e, times, distances. Basically, I'm trying to create a formula that copies data from the second table onto the first but only for odd days of the week, excepting Sundays (and assuming Monday as the start of the week). Now, this isn't the hard part, I can do that. The problem comes when I replicate the formula down the calendar. Even on the days when the 'if' statement identifies it as an 'even day', the cell reference to the appropriate workout on the second table is incremented, so when it comes to the next 'odd day', it has skipped a workout.
I can't seem to see any way of getting it to specifically copy the NEXT line in the second table, and not the corresponding line.
This began as a distraction to try and organise my running so I could see at a glance what I had to do that day and track my progress, but now it's turned into an obsession. SURELY there's a solution?
Cheers.Hi Sealatron,
Welcome to Apple Discussions and the Numbers '09 forum.
Several possible ways to move the data occur to me, but the devil's in the details of how the data is currently arranged.
Is it
• a list of three workouts, one for each of Monday, Wednesday and Friday, then the same three repeated the following week?
• an open-ended list that does not repeat?
• something else?
Regards,
Barry -
Moving time-dependant data from one table to another (archiving)
Hello all
I would like to know if there's an easier solution or a "best practice" to move data from one table to another. The context of this issue can be found within "archiving".
More concretely: we have an application that uses several tables to log information to.
These tables are growing like crazy, and we would like to keep only "relevant" data in those tables, so I was thinking about moving data from these tables that have been in there for, say 2 months, to "archiving" tables.
I figured there must be some kind of "best practice" to get this done.
I have already written a procedure that loops the table that has the time indicator and inserts the records from the normal tables into the archive tables (and afterwards delete this data), but it seems to be taking ages to get it done.
Thanks in advance!
Message was edited by:
timschraepenThere is nothing to do with PL/SQL.
You can refer below links:
http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a96524/c12parti.htm
http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10739/partiti.htm#i1006727 -
Insert old missing data from one table to another(databaase trigger)
Hello,
i want to do two things
1)I want to insert old missing data from one table to another through a database trigger but it can't be executed that way i don't know what should i do in case of replacing old data in table_1 into table_2
2)what should i use :NEW. OR :OLD. instead.
3) what should i do if i have records exising between the two dates
i want to surpress the existing records.
the following code is what i have but no effect occured.
CREATE OR REPLACE TRIGGER ATTENDANCEE_FOLLOWS
AFTER INSERT ON ACCESSLOG
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
V_COUNT NUMBER(2);
V_TIME_OUT DATE;
V_DATE_IN DATE;
V_DATE_OUT DATE;
V_TIME_IN DATE;
V_ATT_FLAG VARCHAR2(3);
V_EMP_ID NUMBER(11);
CURSOR EMP_FOLLOWS IS
SELECT EMPLOYEEID , LOGDATE , LOGTIME , INOUT
FROM ACCESSLOG
WHERE LOGDATE
BETWEEN TO_DATE('18/12/2008','dd/mm/rrrr')
AND TO_DATE('19/12/2008','dd/mm/rrrr');
BEGIN
FOR EMP IN EMP_FOLLOWS LOOP
SELECT COUNT(*)
INTO V_COUNT
FROM EMP_ATTENDANCEE
WHERE EMP_ID = EMP.EMPLOYEEID
AND DATE_IN = EMP.LOGDATE
AND ATT_FLAG = 'I';
IF V_COUNT = 0 THEN
INSERT INTO EMP_ATTENDANCEE (EMP_ID, DATE_IN ,DATE_OUT
,TIME_IN ,TIME_OUT,ATT_FLAG)
VALUES (TO_NUMBER(TO_CHAR(:NEW.employeeid,99999)),
TO_DATE(:NEW.LOGDATE,'dd/mm/rrrr'), -- DATE_IN
NULL,
TO_DATE(:NEW.LOGTIME,'HH24:MI:SS'), -- TIME_IN
NULL ,'I');
ELSIF V_COUNT > 0 THEN
UPDATE EMP_ATTENDANCEE
SET DATE_OUT = TO_DATE(:NEW.LOGDATE,'dd/mm/rrrr'), -- DATE_OUT,
TIME_OUT = TO_DATE(:NEW.LOGTIME,'HH24:MI:SS'), -- TIME_OUT
ATT_FLAG = 'O'
WHERE EMP_ID = TO_NUMBER(TO_CHAR(:NEW.employeeid,99999))
AND DATE_IN <= (SELECT MAX (DATE_IN )
FROM EMP_ATTENDANCEE
WHERE EMP_ID = TO_NUMBER(TO_CHAR(:NEW.employeeid,99999))
AND DATE_OUT IS NULL
AND TIME_OUT IS NULL )
AND DATE_OUT IS NULL
AND TIME_OUT IS NULL ;
END IF;
END LOOP;
EXCEPTION
WHEN OTHERS THEN RAISE;
END ATTENDANCEE_FOLLOWS ;
Regards,
Abdetu..INSERT INTO SALES_MASTER
( NO
, Name
, PINCODE )
SELECT SALESMANNO
, SALESMANNAME
, PINCODE
FROM SALESMAN_MASTER;Regards,
Christian Balz -
Copying data from one table to another table thru java
Hi
I have to copy data from table emp in Database A to table emp in Database B. My input would be table name and number of rows to be fetched. these rows i need to insert in table B.
The problem over here is I won't be having any info. of table emp i.e the number of columns it has and their type.
So is their any way i can copy the data from one table to other without having the info abt the number of cols and their type.
TIACross post - http://forum.java.sun.com/thread.jspa?threadID=5169293&messageID=9649839#9649839
-
Move data from one table to another table
Hi all,
I had a custom table called sales_data in that table there are columns like JAn,FEB,upto DEC including other columns so in each month there is some data total data is 23000 count but each month has has specific data like JAn-2500,FEB-2000 like that it has total 23000 records
My Requirement is i have to move data from one table to another table that too if i will pass jan only jan data should move like that feb,march,.....
in my table there is no month column i had get it from another table called gl_periods and by using cursor and case function i have written the code
well while when i am inserting data am passing year,month as parameters but 23000 data is moving it should get like that.
Please suggest me.its urgent
Thank YouHi hamid,
Please go through the below procedure.
CREATE OR REPLACE PROCEDURE APPS.copy_sales_to_forecast(p_fiscal_year varchar2,p_month number)
IS
CURSOR C1 IS select period_year,period_num,start_date,end_date from apps.gl_periods
where period_set_name='Accounting'
and period_year=p_fiscal_year
and period_num<=p_month;
type type1 is table of xxc_forecast_data%rowtype;
t1 type1;
BEGIN
FOR CREC IN C1 LOOP
BEGIN
DELETE FROM xxc_forecast2
where fiscal_year = crec.period_year
and attribute1='Copied From Sales to Forecast Table of Month '||crec.period_num;
END;
SELECT
product_category ,
product_sub_category ,
product_line ,
product_style ,
item_number ,
item_description ,
customer_name ,
customer_number ,
sales_channel ,
null ,
CASE
WHEN crec.period_num=1 THEN sales_amount_month1
ELSE 0
END Transaction_quantity_period1,
CASE
WHEN crec.period_num=1 THEN sales_cost_month1
ELSE 0
END item_cogs_period1,
CASE
WHEN crec.period_num=1 THEN sales_mtl_cost_month1
ELSE 0
END item_material_cogs_period1 ,
CASE
WHEN crec.period_num=1 THEN sales_mtl_ovhd_cost_month1
ELSE 0
END item_mtl_ovhd_cogs_period1,
CASE
WHEN crec.period_num=1 THEN sales_res_cost_month1
ELSE 0
END item_resource_cogs_period1,
CASE
WHEN crec.period_num=1 THEN sales_op_cost_month1
ELSE 0
END item_op_cogs_period1,
CASE
WHEN crec.period_num=1 THEN sales_ovhd_month1
ELSE 0
END item_ovhd_cogs_period1,
CASE
WHEN crec.period_num=1 THEN sales_units_month1
ELSE 0
END extended_amount_us_period1,
CASE
WHEN crec.period_num=2 THEN sales_amount_month2
ELSE 0
END Transaction_quantity_period2,
CASE
WHEN crec.period_num=2 THEN sales_mtl_cost_month2
ELSE 0
END item_material_cogs_period2,
CASE
WHEN crec.period_num=2 THEN sales_mtl_ovhd_cost_month2
ELSE 0
END item_mtl_ovhd_cogs_period2,
CASE
WHEN crec.period_num=2 THEN sales_res_cost_month2
ELSE 0
END item_resource_cogs_period2,
CASE
WHEN crec.period_num=2 THEN sales_op_cost_month2
ELSE 0
END item_op_cogs_period2,
CASE
WHEN crec.period_num=2 THEN sales_ovhd_month2
ELSE 0
END item_ovhd_cogs_period2,
CASE
WHEN crec.period_num=2 THEN sales_units_month2
ELSE 0
END extended_amount_us_period2,
CASE
WHEN crec.period_num=3 THEN sales_amount_month3
ELSE 0
END Transaction_quantity_period3,
CASE
WHEN crec.period_num=3 THEN sales_mtl_cost_month3
ELSE 0
END item_material_cogs_period3,
CASE
WHEN crec.period_num=3 THEN sales_mtl_ovhd_cost_month3
ELSE 0
END item_mtl_ovhd_cogs_period3,
CASE
WHEN crec.period_num=3 THEN sales_res_cost_month3
ELSE 0
END item_resource_cogs_period3,
CASE
WHEN crec.period_num=3 THEN sales_op_cost_month3
ELSE 0
END item_op_cogs_period3,
CASE
WHEN crec.period_num=3 THEN sales_ovhd_month3
ELSE 0
END item_ovhd_cogs_period3,
CASE
WHEN crec.period_num=3 THEN sales_units_month3
ELSE 0
END extended_amount_us_period3,
CASE
WHEN crec.period_num=4 THEN sales_amount_month4
ELSE 0
END Transaction_quantity_period4,
CASE
WHEN crec.period_num=4 THEN sales_mtl_cost_month4
ELSE 0
END item_material_cogs_period4,
CASE
WHEN crec.period_num=4 THEN sales_mtl_ovhd_cost_month4
ELSE 0
END item_mtl_ovhd_cogs_period4,
CASE
WHEN crec.period_num=4 THEN sales_res_cost_month4
ELSE 0
END item_resource_cogs_period4,
CASE
WHEN crec.period_num=4 THEN sales_op_cost_month4
ELSE 0
END item_op_cogs_period4,
CASE
WHEN crec.period_num=4 THEN sales_ovhd_month4
ELSE 0
END item_ovhd_cogs_period4,
CASE
WHEN crec.period_num=4 THEN sales_units_month4
ELSE 0
END extended_amount_us_period4,
CASE
WHEN crec.period_num=5 THEN sales_amount_month5
ELSE 0
END Transaction_quantity_period5,
CASE
WHEN crec.period_num=5 THEN sales_mtl_cost_month5
ELSE 0
END item_material_cogs_period5,
CASE
WHEN crec.period_num=5 THEN sales_mtl_ovhd_cost_month5
ELSE 0
END item_mtl_ovhd_cogs_period5,
CASE
WHEN crec.period_num=5 THEN sales_res_cost_month5
ELSE 0
END item_resource_cogs_period5,
CASE
WHEN crec.period_num=5 THEN sales_op_cost_month5
ELSE 0
END item_op_cogs_period5,
CASE
WHEN crec.period_num=5 THEN sales_ovhd_month5
ELSE 0
END item_ovhd_cogs_period5,
CASE
WHEN crec.period_num=5 THEN sales_units_month5
ELSE 0
END extended_amount_us_period5,
CASE
WHEN crec.period_num=6 THEN sales_amount_month6
ELSE 0
END Transaction_quantity_period6,
CASE
WHEN crec.period_num=6 THEN sales_mtl_cost_month6
ELSE 0
END item_material_cogs_period6,
CASE
WHEN crec.period_num=6 THEN sales_mtl_ovhd_cost_month6
ELSE 0
END item_mtl_ovhd_cogs_period6,
CASE
WHEN crec.period_num=6 THEN sales_res_cost_month6
ELSE 0
END item_resource_cogs_period6,
CASE
WHEN crec.period_num=6 THEN sales_op_cost_month6
ELSE 0
END item_op_cogs_period6,
CASE
WHEN crec.period_num=6 THEN sales_ovhd_month6
ELSE 0
END item_ovhd_cogs_period6,
CASE
WHEN crec.period_num=6 THEN sales_units_month6
ELSE 0
END extended_amount_us_period6,
CASE
WHEN crec.period_num=7 THEN sales_amount_month7
ELSE 0
END Transaction_quantity_period7,
CASE
WHEN crec.period_num=7 THEN sales_mtl_cost_month7
ELSE 0
END item_material_cogs_period7,
CASE
WHEN crec.period_num=7 THEN sales_mtl_ovhd_cost_month7
ELSE 0
END item_mtl_ovhd_cogs_period7,
CASE
WHEN crec.period_num=7 THEN sales_res_cost_month7
ELSE 0
END item_resource_cogs_period7,
CASE
WHEN crec.period_num=7 THEN sales_op_cost_month7
ELSE 0
END item_op_cogs_period7,
CASE
WHEN crec.period_num=7 THEN sales_ovhd_month7
ELSE 0
END item_ovhd_cogs_period7,
CASE
WHEN crec.period_num=7 THEN sales_units_month7
ELSE 0
END extended_amount_us_period7,
CASE
WHEN crec.period_num=8 THEN sales_amount_month8
ELSE 0
END Transaction_quantity_period8,
CASE
WHEN crec.period_num=8 THEN sales_mtl_cost_month8
ELSE 0
END item_material_cogs_period8,
CASE
WHEN crec.period_num=8 THEN sales_mtl_ovhd_cost_month8
ELSE 0
END item_mtl_ovhd_cogs_period8,
CASE
WHEN crec.period_num=8 THEN sales_res_cost_month8
ELSE 0
END item_resource_cogs_period7,
CASE
WHEN crec.period_num=8 THEN sales_op_cost_month8
ELSE 0
END item_op_cogs_period8,
CASE
WHEN crec.period_num=8 THEN sales_ovhd_month8
ELSE 0
END item_ovhd_cogs_period8,
CASE
WHEN crec.period_num=8 THEN sales_units_month8
ELSE 0
END extended_amount_us_period8,
CASE
WHEN crec.period_num=9 THEN sales_amount_month9
ELSE 0
END Transaction_quantity_period9,
CASE
WHEN crec.period_num=9 THEN sales_mtl_cost_month9
ELSE 0
END item_material_cogs_period9,
CASE
WHEN crec.period_num=9 THEN sales_mtl_ovhd_cost_month9
ELSE 0
END item_mtl_ovhd_cogs_period9,
CASE
WHEN crec.period_num=9 THEN sales_res_cost_month9
ELSE 0
END item_resource_cogs_period7,
CASE
WHEN crec.period_num=9 THEN sales_op_cost_month9
ELSE 0
END item_op_cogs_period9,
CASE
WHEN crec.period_num=9 THEN sales_ovhd_month9
ELSE 0
END item_ovhd_cogs_period9,
CASE
WHEN crec.period_num=9 THEN sales_units_month9
ELSE 0
END extended_amount_us_period9,
CASE
WHEN crec.period_num=10 THEN sales_amount_month10
ELSE 0
END Transaction_quantity_period10,
CASE
WHEN crec.period_num=10 THEN sales_mtl_cost_month10
ELSE 0
END item_material_cogs_period10,
CASE
WHEN crec.period_num=10 THEN sales_mtl_ovhd_cost_month10
ELSE 0
END item_mtl_ovhd_cogs_period10,
CASE
WHEN crec.period_num=10 THEN sales_res_cost_month10
ELSE 0
END item_resource_cogs_period10,
CASE
WHEN crec.period_num=10 THEN sales_op_cost_month10
ELSE 0
END item_op_cogs_period10,
CASE
WHEN crec.period_num=10 THEN sales_ovhd_month10
ELSE 0
END item_ovhd_cogs_period10,
CASE
WHEN crec.period_num=10 THEN sales_units_month10
ELSE 0
END extended_amount_us_period10,
CASE
WHEN crec.period_num=11 THEN sales_amount_month11
ELSE 0
END Transaction_quantity_period11,
CASE
WHEN crec.period_num=11 THEN sales_mtl_cost_month11
ELSE 0
END item_material_cogs_period11,
CASE
WHEN crec.period_num=11 THEN sales_mtl_ovhd_cost_month11
ELSE 0
END item_mtl_ovhd_cogs_period11,
CASE
WHEN crec.period_num=11 THEN sales_res_cost_month11
ELSE 0
END item_resource_cogs_period11,
CASE
WHEN crec.period_num=11 THEN sales_op_cost_month11
ELSE 0
END item_op_cogs_period11,
CASE
WHEN crec.period_num=11 THEN sales_ovhd_month11
ELSE 0
END item_ovhd_cogs_period11,
CASE
WHEN crec.period_num=11 THEN sales_units_month11
ELSE 0
END extended_amount_us_period11,
CASE
WHEN crec.period_num=12 THEN sales_amount_month12
ELSE 0
END Transaction_quantity_period12,
CASE
WHEN crec.period_num=12 THEN sales_mtl_cost_month12
ELSE 0
END item_material_cogs_period12,
CASE
WHEN crec.period_num=12 THEN sales_mtl_ovhd_cost_month12
ELSE 0
END item_mtl_ovhd_cogs_period12,
CASE
WHEN crec.period_num=12 THEN sales_res_cost_month12
ELSE 0
END item_resource_cogs_period12,
CASE
WHEN crec.period_num=12 THEN sales_op_cost_month12
ELSE 0
END item_op_cogs_period12,
CASE
WHEN crec.period_num=12 THEN sales_ovhd_month12
ELSE 0
END item_ovhd_cogs_period12,
CASE
WHEN crec.period_num=12 THEN sales_units_month12
ELSE 0
END extended_amount_us_period12,
CASE
WHEN crec.period_num=2 THEN sales_cost_month2
ELSE 0
END item_cogs_period2,
CASE
WHEN crec.period_num=3 THEN sales_cost_month3
ELSE 0
END item_cogs_period3,
CASE
WHEN crec.period_num=4 THEN sales_cost_month4
ELSE 0
END item_cogs_period4,
CASE
WHEN crec.period_num=5 THEN sales_cost_month5
ELSE 0
END item_cogs_period5,
CASE
WHEN crec.period_num=6 THEN sales_cost_month6
ELSE 0
END item_cogs_period6,
CASE
WHEN crec.period_num=7 THEN sales_cost_month7
ELSE 0
END item_cogs_period7,
CASE
WHEN crec.period_num=8 THEN sales_cost_month8
ELSE 0
END item_cogs_period8,
CASE
WHEN crec.period_num=9 THEN sales_cost_month9
ELSE 0
END item_cogs_period9,
CASE
WHEN crec.period_num=10 THEN sales_cost_month10
ELSE 0
END item_cogs_period10,
CASE
WHEN crec.period_num=11 THEN sales_cost_month11
ELSE 0
END item_cogs_period11,
CASE
WHEN crec.period_num=12 THEN sales_cost_month12
ELSE 0
END item_cogs_period12,
a.fiscal_year ,
a.budget_entity ,
a.organization_code,
a.customer_id ,
a.inventory_item_id ,
NULL,
NULL,
a.created_by ,
a.last_updated_by ,
a.creation_date ,
a.last_update_date ,
'Copied From Sales to Forecast Table of Month '||crec.period_num,
a.attribute2,
a.attribute3 ,
a.attribute4 ,
a.attribute5 ,
a.attribute6 ,
a.attribute7 ,
a.attribute8 ,
a.attribute9 ,
a.attribute10,
a.attribute11,
a.attribute12,
a.attribute13,
a.attribute14,
a.attribute15
bulk collect into t1
FROM xxc_sales_data a
where a.fiscal_year = crec.period_year
having CASE
WHEN crec.period_num=1 THEN sum(sales_amount_month1)
WHEN crec.period_num=2 THEN sum(sales_amount_month2)
WHEN crec.period_num=3 THEN sum(sales_amount_month3)
WHEN crec.period_num=4 THEN sum(sales_amount_month4)
WHEN crec.period_num=5 THEN sum(sales_amount_month5)
WHEN crec.period_num=6 THEN sum(sales_amount_month6)
WHEN crec.period_num=7 THEN sum(sales_amount_month7)
WHEN crec.period_num=8 THEN sum(sales_amount_month8)
WHEN crec.period_num=9 THEN sum(sales_amount_month9)
WHEN crec.period_num=10 THEN sum(sales_amount_month10)
WHEN crec.period_num=11 THEN sum(sales_amount_month11)
WHEN crec.period_num=12 THEN sum(sales_amount_month12)
END !=0;
FORALL i IN t1.first .. t1.last
INSERT INTO xxc_forecast2 VALUES t1(i);
--commit;
END LOOP;
END;
Thank You -
Moving Data from one table to another table
Hi,
I've a requirement to move large volumes (few billions) of data from one table to another empty target table. The target has more number of attributes and may not have same attribute name as the source. Please let me know what's the best method using oracle to move data in this case?
Thanks in Advance,
TomYou should use nologging and parallelism options
Please refer to Tom's answers:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:164612348068
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:6407993912330
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/] -
Appending data from one table to another
Hello
How to append data from one table t1 to another table t2.
t1 and t2 have the same structures .
t2 contains already data so i don't want do delete it and create it as select * from t1.
If there is a mean to add t1 content without altering t2 content.
Thanks in advanceinsert into t2
select * from t1 -
Append data from one table to another.
Hi,
I want to insert/append some or all the data from one table to another table.
For eg: Data from table table1 to be appended to table2 with the same constraints, indexes etc. The columns are same for both the tables.
I am using 10g version 2.
Please specify which method would be good for this process.
Thanks
JafarINSERT INTO TABLE1 SELECT * FROM TABLE2;The above command would insert data into table2 and it also contain the old data.Is that right,
Thanks
Jafar -
Simple way to insert data from one table
Hi,
I need to know a simple way on how to transfer the data from one table to another....
First table xx_inv_tab1 has three columns col1, col2, col3 and where as second table xx_inv_tab2 has five columns col1, col2, col3, col4, col5.
Here col2, col3, col4 are the same columns as in table1 xx_inv_tab1...
Now I want to transfer first table data in to second table .... first column of second table holds a sequence, followed by the first table three columns data and followed with col4 and col5 which will hold NULL values....
In my scenario, I have 70 - 75 columns in my first table which I want to move to second table which three new columns (one is sequence and other two has null values)...
Any ideas if we make it in a simplest way rather saying insert into xx_inv_tab2 (col1, col2, col3 ............................................. col75) values (seq, col1, col2..........................col75, null, null)
Help Appreciated..
ThanksEasy
untested
insert into xx_inv_tab2 t2 (col1,col2,col3,col4)
select yourSequence.nextval, t1.col1, t1.col2, t1.col3
from xx_inv_tab1 t1
;Note that col5 does not need to be used, since you want to fill it with NULL.
USe excel or sql developer to write you a list of column names, if you are to lazy to write all 75 columns by yourself.
What might also work:
untested
insert into xx_inv_tab2 t2
select yourSequence.nextval, t1.*, null
from xx_inv_tab1 t1
;Edited by: Sven W. on Aug 31, 2012 4:41 PM -
How do I make data from one Table flow into a separate Table
How do I make data from one Table flow into a separate Table in iworks numbers?
Great stuff Yvan,
KOENIG Yvan wrote:
Here you may see the way to transfer the contents of a column of Table A in a column of Table B
I used two kinds of formulas.
In the cell A2 of Table B
the formula is :
=Table A :: $B2
It may be :
=Table A :: $B
Apply Fill Down
Copy paste it in cell A1 which is in a header row.
This formula does its duty but it’s not robust enough and will not survive to a Sort.
This is why in B2, I inserted a more robust formula :
=OFFSET(Table A :: $A$1,ROW()-1,2)
You will find details about the functions used in Numbers User Guide delivered with every copy of iWork ‘08
Yvan KOENIG (VALLAURIS, France) samedi 6 août 2011 17:45:22
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !
The first suggestion was the simple answer I needed,
Thank you -
T code to Copy Data from one table to another table
Hi,
I want copy all data of one table to its copy table. Anyone knows transaction code to copy data from one table to another table.
Regards,
Jigar Thakkar.Hi
Create a small program.
Extract data from T1 - database table and put it in one internal table - itab1.
loop the itab1 data .............
insert itab1 into tab2. (tab2 - second database table)
endloop.
try this....
hope it works.... -
Inserting data from one table to another in different format
Hello,
I would like to know what I am doing wrong with the following code when I write a data from one another to another table in a different format. I am now learning PL/SQL and am using this as
a test problem.
I have a table called students which has the following columns:
SQL> desc student
Name Null? Type
----------- ----------------STUDENT_ID NUMBER(10)
COURSE VARCHAR2(10)
CREDITS NUMBER(10)
I have created another table called new_student which has the following structure:
SQL> desc new_student
Name Null? Type
----------------------------------------- -------- ------------- STUDENT_ID NUMBER(10)
COURSE VARCHAR2(30)
CREDITS VARCHAR2(10)
The data in the student table is:
SQL> select * from student;
STUDENT_ID COURSE CREDITS
1 Science 4
1 History 3
2 Science 4
2 History 3
2 Math 4
3 Sociology 3
3 Psycology 3
I want to store the STUDENT table data in NEW_STUDENT table as:
STUDENT ID COURSES CREDITS
1 Science/History 4/3
2 Science/History/Math 4/3/4
3 Sociology/Psycology 3/3
This is my code:
DECLARE
-- Get all the student IDs
CURSOR studentlist_cursor IS select distinct student_id from student ORDER BY student_id;
-- Get the information for each student ID
CURSOR courses_cursor(nstudentid number) is select course, credits from student where student_id=nstudentid;
nIndex INTEGER;
pltcourses DBMS_SQL.VARCHAR2_TABLE;
pltcredits DBMS_SQL.NUMBER_TABLE;
newcourses varchar2(50);
newcredits varchar2(10);
BEGIN
FOR student_rec IN studentlist_cursor
LOOP
nIndex:=0;
-- Loop through each student ID from student_rec to get the
--courses and creditsstudent ID
FOR courses_rec in courses_cursor(student_rec.student_id)
LOOP
nIndex:=nIndex+1;
pltcourses(nIndex):=courses_rec.course;
-- Store the course data for each student ID in newcourses
-- while doing so check if it is null or put a '/' between each course
loop
if newcourses is null then
newcourses:=pltcourses(nIndex);
else
newcourses:=newcourses||'/'||pltcourses(nIndex);
end if;
end loop;
pltcredits(nIndex):=courses_rec.credits;
--Store credits data in variable newcredits
--If the newcredits is not null then put a '/' between each credits
loop
if newcredits is null then
newcredits:=pltcredits(nIndex);
else
newcredits:=newcredits||'/'||pltcredits(nIndex);
end if;
end loop;
-- Insert student id, newcourses, newcredits into NEW_STUDENT
INSERT INTO NEW_STUDENT
(student_id ,
course,
credits
) VALUES
(student_rec.student_id,
newcourses,
newcredits
COMMIT;
-- come out of the student id record and go to the next student --id record
END LOOP;
-- come out of the loop
END LOOP;
END;
While doing so I get an error message:
declare
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at line 23.
The error is at the line:
newcourses:=newcourses||'/'||pltcourses(nIndex);
Can anyone help me by pointing out where the mistake is?
Thank you for reading this long mail.
Thank you.
Rama.Hi dude
there is lot of error in ur pl/sql.
and u have created table new_student with columns
student_id number(10),
courses varchar2(30),
credits number(10).
first u need to modify ur table.
student_id number(10),
courses varchar2(30),
credits varchar2(10).
Now i am writing whole pl/sql block for u. it will work fine.
DECLARE
CURSOR studentlist_cursor IS select distinct student_id from student ORDER BY student_id;
CURSOR courses_cursor(nstudentid number) is select course, credits from student
where student_id = nstudentid;
nIndex INTEGER;
pltcourses DBMS_SQL.VARCHAR2_TABLE;
pltcredits DBMS_SQL.NUMBER_TABLE;
newcourses varchar2(50);
newcredits varchar2(10);
BEGIN
FOR student_rec IN studentlist_cursor
LOOP
nIndex:=0;
newcourses := null;
newcredits := null;
FOR courses_rec in courses_cursor(student_rec.student_id)
LOOP
nIndex:=nIndex+1;
pltcourses(nIndex):=courses_rec.course;
if newcourses is null then
newcourses:=pltcourses(nIndex);
else
newcourses:=newcourses||'/'||pltcourses(nIndex);
end if;
pltcredits(nIndex):=courses_rec.credits;
if newcredits is null then
newcredits:=pltcredits(nIndex);
else
newcredits:=newcredits||'/'||pltcredits(nIndex);
end if;
end loop;
INSERT INTO NEW_STUDENT
(student_id,
course) VALUES
(student_rec.student_id,
newcourses);
END LOOP;
END;
and please revert back
Regards
Anil
Maybe you are looking for
-
Need help please I just bought this iPad today and I factory reset it and then I plugged into my laptop and downloaded the latest software I went and purchased a app store card and a iTunes card but when I try to download apps it won't let me if anyo
-
How do I get live data from a subvi while it is running ?
Hi. I'm finishing up my little application, and one of the things I cant figure out to get to work is getting live data from a subvi and displaying it on my main vi's front panel. In my subvi I am sending about 10 commands to the serial port, each ti
-
How to make my screen fullscreen
some how my screen isnt fullscreen and i dont know how to make put it back to how it was before. All my windows and everything are smaller
-
Ok so I'm newish to Premier and starting to get frustrated by how slow it is to edit in this software. Surely there must be an easy way to make a whole sequence of clips run in slow motion at 50% speed. I've copied down the clips to the timeline but
-
Yosemite upgrade dilemna. Need help.