Referencing a field from a resource table to a task table

Hello,
I have created a a resource field that is called "Internal Cost Rate" and I would like this field to be added to a Task table so that I can then reference it and make a simple calculation. For example in the Task Table I have the "Work Time"
and want to do with a multiplication to a third field so that:
"Sum of internal costs" = "Internal Cost Rate" * "Work Time"
When I try to add or reference the field in my task table, it is not available. The idea is that I want the "Internal Cost Rate" to be with the resource integrated. Any ideas?
Thank you very much in advance!
Ioannis

Hi Ioannis,
I think we have to make a step backward since it is not possible to calculate an assignment cost based on 2 rates. But there might be different ways based on your need such as the fixed cost, cost custom fields, cost per use, cost resources...
Please give us some information about your initial business need so we can figure out a way to help you.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Similar Messages

Extract a value of a fields from an internal table

hello everyone,
i need to extract a value of a fields from an internal table, the fields is in a postion "sy-tabix" that i know, so i need to pick this value without using a loop
thank you.

Like this?
DATA: FIELD1 TYPE C,
FIELD2 TYPE C.
READ TABLE T_TAB INDEX 3.
FIELD1 = T_TAB-FIELD1.
FIELD2 = T_TAB-FIELD2.
Greetings,
Blag.

Displaying fields from a Z Table on CRM UI

Hello Experts
I am trying to display fields from a custom table onto a CRM UI form view.
1. I created a custom GENIL root object & Search object ie. ZCUSTOMER. & ZCUSTSEARCH
2. Tested this in the GENIL BROWSER to ensure that I could enter update values to the table and retrieve it via the search object.
3. Created a custom component ZCUSTOMER
4. Created a view with this component ZCUSTOMER using the wizard -
     Model Name - CUSTINFO
     BOL Entity - ZCUSTOMER
     No links to the custom controller or higher level objects.(as I do not want to tie this to any standard components)
Type of view - Form view
7. Created a Context node for the component controller with the same info as I did for the view.
8. Performed the binding of the view context node with the component controller context node.
9. Configured 1 field CUST_NAME to be displayed on the view.
10. Configured the run time repository to display the view.
Now the issue is..
When the view gets displayed, the field is displayed with the error "CUST_NAME not bound"
What am i missing?
Thanks
RLX

Hi Swati,
Thanks for the feedback. I re-viewed the WD_CREATE_CONTEXT method of the view controller implementation class and I see the following code in there already-
method WD_CREATE_CONTEXT.
create the context
    context = cl_bsp_wd_context=>get_instance(
          iv_controller = me
          iv_type = 'ZL_ZCUSTOMER_BSPWDCOMPONEN_CTXT' ).
    typed_context ?= context.
endmethod.
Does that look right or do I need to modify it?
Thanks once again for the help.
RLX

Extracting Values of a Field from a Database Table in SAP ECC System

Hi,
I downloaded Extracting Values of a Field from a Database Table in SAP ECC System Using MII 12.0
senario from sdn. I'm trying to do that senario in MII 12.05. But I have problem with section 6 in page 7 (you can supply senario from sdn)
"6- Under the loop of Repeater, use action u2018Rowu2019 to append just the string part of the WA which will display only values for field u2018Batchu2019"
I did not find WA elemen in Output element of Repeater_0
How can I create WA element?
Thanks.

Cemil,
Set up a SAP JCo Interface action block. Use the RFC name RFC_READ_TABLE.
In the link editor map the table to "MARA", set RowCount to something small (20 is good sample size) and create an xml transaction property named FIELDS and copy the following into it:
<?xml version="1.0" encoding="UTF-8"?><FIELDS>
      <item>
        <FIELDNAME>MATNR</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
      <item>
        <FIELDNAME>MTART</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
      <item>
        <FIELDNAME>BSTME</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
      <item>
        <FIELDNAME>XCHPF</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
      <item>
        <FIELDNAME>DATAB</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
    </FIELDS>
Then link the Transaction.FIELDS to SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/TABLES/FIELDS}. You may run into problems with two other fields and optionally they can be removed (set link type to remove xml). I usually remove them initially for testing. The two fields are:
SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/INPUT/NO_DATA}
SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/INPUT/DELIMITER} (or you can set this to something like a semicolon,";" or tilda,"~". I find it easier to caclulate position by length, but that is my own idiosyncrasy.)
Once you get this one working, we can explore how to do filtering on the dataset. Your output should be something like this:
<?xml version="1.0" encoding="utf-8"?>
<RFC_READ_TABLE>
<INPUT>
    <DELIMITER />
    <NO_DATA />
    <QUERY_TABLE>MARA</QUERY_TABLE>
    <ROWCOUNT>20</ROWCOUNT>
    <ROWSKIPS>0</ROWSKIPS>
</INPUT>
<TABLES>
    <DATA>
      <item>
        <WA>000000000000000023ROH 00000000</WA>
      </item>
      <item>
        <WA>000000000000000038HALB 00000000</WA>
      </item>
      <item>
        <WA>000000000000000043HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000058HIBE 00000000</WA>
      </item>
      <item>
        <WA>000000000000000059HIBE 00000000</WA>
      </item>
      <item>
        <WA>000000000000000068FHMI 00000000</WA>
      </item>
      <item>
        <WA>000000000000000078DIEN 00000000</WA>
      </item>
      <item>
        <WA>000000000000000088FERT 00000000</WA>
      </item>
      <item>
        <WA>000000000000000089FERT 00000000</WA>
      </item>
      <item>
        <WA>000000000000000098HALB 00000000</WA>
      </item>
      <item>
        <WA>000000000000000170NLAG 00000000</WA>
      </item>
      <item>
        <WA>000000000000000178NLAG 00000000</WA>
      </item>
      <item>
        <WA>000000000000000188NLAG 00000000</WA>
      </item>
      <item>
        <WA>000000000000000288HALB 00000000</WA>
      </item>
      <item>
        <WA>000000000000000358HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000359HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000521HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000578FERT 00000000</WA>
      </item>
      <item>
        <WA>000000000000000597HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000598VERP 00000000</WA>
      </item>
    </DATA>
    <FIELDS>
      <item>
        <FIELDNAME>MATNR</FIELDNAME>
        <OFFSET>000000</OFFSET>
        <LENGTH>000018</LENGTH>
        <TYPE>C</TYPE>
        <FIELDTEXT>Material Number</FIELDTEXT>
      </item>
      <item>
        <FIELDNAME>MTART</FIELDNAME>
        <OFFSET>000018</OFFSET>
        <LENGTH>000004</LENGTH>
        <TYPE>C</TYPE>
        <FIELDTEXT>Material Type</FIELDTEXT>
      </item>
      <item>
        <FIELDNAME>BSTME</FIELDNAME>
        <OFFSET>000022</OFFSET>
        <LENGTH>000003</LENGTH>
        <TYPE>C</TYPE>
        <FIELDTEXT>Purchase Order Unit of Measure</FIELDTEXT>
      </item>
      <item>
        <FIELDNAME>XCHPF</FIELDNAME>
        <OFFSET>000025</OFFSET>
        <LENGTH>000001</LENGTH>
        <TYPE>C</TYPE>
        <FIELDTEXT>Batch management requirement indicator</FIELDTEXT>
      </item>
      <item>
        <FIELDNAME>DATAB</FIELDNAME>
        <OFFSET>000026</OFFSET>
        <LENGTH>000008</LENGTH>
        <TYPE>D</TYPE>
        <FIELDTEXT>Valid-From Date</FIELDTEXT>
      </item>
    </FIELDS>
    <OPTIONS />
</TABLES>
</RFC_READ_TABLE>
Add a repeater sourced on:
SAP_JCo_Interface_0.Response{/RFC_READ_TABLE/TABLES/DATA/item}
Link your repeater output to a tracer with this:
Repeater_0.Output{/item/WA}
What you will see in each tracer message is a single line of data with all the fields contents concatenated together. You can look up what each field in the string represents by the length of the field as returned in the Response segment of the RFC_READ_TABLE rfc. Then you can parse out the data you are interested in.
Give this a try and let me know how you succeeded.
By the way, I could not find the scenario you referred to. Can you post a link?
Regards,
Mike
Edited by: Michael Appleby on Jan 12, 2009 5:16 PM

How to compare two fields from the same table in the select statement

Hi, friends
I try to compare tow fields from the same table, but no result,
For example, this
data: cptotchek tyep i.
select count(*) into cptotchek
from aufk where erdat = aufk-idat2 .
The result is cptotchek = 0, but there are the records in aufk , where, aufk-erdat = aufk-idat2.
Please, help me, i don't use the loop statement for optimize my program.
Regards

Hi ,
       it will not return any value   when you are using   column of same table
       such as Date Field   , Because while Using Aggregate Function it will not check with self column
.      For that you have to take data in one internal table and then you can work on it .
     And if you are worried about Performance it will not affect , untill you are selecting only required data .
you can try this way .
data: cptotchek type i.
types : begin of w_aufk.
        include structure aufk .
      types : end of w_aufk .
data : it_aufk type standard table of w_aufk with header line .
select * into corresponding fields of table it_aufk
from aufk .
loop at it_aufk .
if it_aufk-erdat = it_aufk-idat2 .
write : / it_aufk-erdat , it_aufk-idat2 .
else .
delete it_aufk .
endif .
endloop.
Regards
Deepak.

Select Distinct Fields from non related table

Hi Experts,
I have to fetch Distinct Fields from table zdcxy along with the fields from the table zvend but there is no primary key forigen key relationship also if I wanted use join condition. I need to move fields from both the table into output file and 1 part I implemented but I am unable to do second part plz any body can help me its argent. below I pasted part of code along with two requirements.
1.Select all data (Location - LIFNR, Descr u2013 ZPLTNAMEC, CJI_CUSTOMER u2013 CJI customer flag) from ZVEND table.
2.Select all distinct DCs and BUs from zdcxy table.
SELECT * FROM ZVENDPLT INTO CORRESPONDING FIELDS OF TABLE IT_VENDPLT.
*select distinct zdc from zdcxy into corresponding fields of table it_map.
*select distinct zbu from zdcxy into corresponding fields of table it_map.
IF SY-SUBRC = 0.
    LOOP AT IT_VEND.
      MOVE : IT_VENDPLT-LIFNR              TO IT_TAB-FIELD1,
              IT_VENDPLT-ZPLTNAMEC          TO IT_TAB-FIELD2,
              IT_VENDPLT-CJI_CUSTOMER       TO IT_TAB-FIELD3,
       CONCATENATE :IiT_TAB-FIELD1   IT_TAB-FIELD2   IT_TAB-FIELD3   IT_TAB-FIELD4
INTO IT_LOAD-RECORD SEPARATED BY SEPARATOR.
      TRANSFER IT_LOAD TO OUT_FILE.
ENDLOOP.
Can any body explain me hw to fetch DC and Bu from the table zdcxy and keep in the same loop of   it_vend.
Second thing is that I need to give information about records into second output file hw to do that means I opened one more file and I am unable to move the record history there plz help me.
Thanks in advance

Plz any body can help me it's argent.
Thanks
Basu

How to join fields from different internal tables and display into one int

hai i have one doubt...
how to join fields from different internal tables and display into one internal table..
if anybody know the ans for this qus tell me......

hii
you can read data as per condition and then can join in one internal table using READ and APPEND statement..refer to following code.
SELECT bwkey                         " Valuation Area
         bukrs                         " Company Code
    FROM t001k
    INTO TABLE i_t001k
   WHERE bukrs IN s_bukrs.
IF sy-subrc EQ 0.
    SELECT bwkey                       " Valuation Area
           werks                       " Plant
      FROM t001w
      INTO TABLE i_t001w
       FOR ALL ENTRIES IN i_t001k
     WHERE bwkey = i_t001k-bwkey
       AND werks IN s_werks.
    IF sy-subrc EQ 0.
      LOOP AT i_output INTO wa_output.
        READ TABLE i_t001w INTO wa_t001w WITH KEY werks = wa_output-werks.
        READ TABLE i_t001k INTO wa_t001k WITH KEY bwkey = wa_t001w-bwkey.
        wa_output-bukrs = wa_t001k-bukrs.
        MODIFY i_output FROM wa_output.
        CLEAR wa_output.
      ENDLOOP.                         " LOOP AT i_output
    ENDIF.                             " IF sy-subrc EQ 0
regards
twinkal

Populating multiple text fields from a database table...

I have a database table with several fields e.g. drawing_no, title, date_entered etc..I have a form that has the same fields. I want to be able to input a value into drawing_no field, and have it retrieve all the other values from the database - if they exist, or return blanks/nulls if it does not exit. I know how to do this for a single field, but not for retrieving multiple fields

Hi ,
You can create a before header page process and fetch all the fields from database, or you can take a look at in-built process Automated Row Fetch.
For e.g. lets say u have field1, field2, field3, field4 and field5 based on col1, col2, col3, col4, col5 from table tab1
Now create a page process of type PL-SQL and give a meaningful name to the process and accept the default as on Load Before header. In the "Enter PL/SQL Page Process" block enter a code similar to this one
DECLARE
BEGIN
IF :drawing_no IS NOT NULL THEN
SELECT col1, col2, col3, col4, col5 INTO :field1, :field2, :field3, :field4, :field5
FROM tab1 WHERE drawing_no = :drawing_no ;
END IF;
EXCEPTION WHEN NO_DATA_FOUND THEN
NULL;
END;The above block will fetch the records into input fields every time u refresh the page.
Hope this helps.
Thanks,
Manish

Can't get table field from two different tables if named same

select c.notes, o.notes
from cusomters c, orders o
:does not work in getting the RS.
:if i change database to:
select c.customer_notes, o.order_notes
from cusomters c, orders o
:then it works.
:i make PURE DYNAMIC META SQL database
applicaitons, and i need for abstract SQL tables.
i have the same problem in getting
the max values:
select
max(height),
max(weight),
max(age)
from person_stats
group by geographical_area

When you select from 2 different tables you need to join them on some condition, otherwise it has no idea how to associate the 2 tables together.
try select c.notes, o.notes from cusomters c, orders o where c.customer_id = o.customer.id or whatever the join fields are.
For the group by I believe you have to include the field that you group by:
select geopraphical_area, max(height), max(weight), max(age) from person_stats group by geographical_area
give them a try
Jamie

How to summary a field from 2 separate tables but having the same fields

Post Author: thuyvd78
CA Forum: General
Hi, I am getting trouble with creating the summary from 2 separate tables. These tables dont have any link together but they have the same fields, such as: part id, qty, etc. I need to create a report that displays whole the information from these tables and also the summary of total qty field of these tablesAny idea to organize this report? Thank you very much! Thuy

Post Author: thuyvd78
CA Forum: General
Thank you for your help v361.where can I can get the link to download samples for subreport from official website?And can I use FULL INNER query to join these tables. I think this way is much clearer than using subreport but not sure it will work? Thanks Thuy

How to find min and max of a field from sorted internal table

Hi,
I have sorted Internal Table by field f1.
How do I find max and min value of f1.
For min value of f1 I am using,
READ TABLE IT1 INDEX 1.
IT1-F1 = MIN.
Is this correct? And how do I find the max value of f1 from this table.
Thanks,
CD

Yes, that is right, and you can get the max like this.
data: lv_lines type i.
* get min
READ TABLE IT1 INDEX 1.
MIN = IT1-F1.
* get max
lv_lines = lines( it1 ).
read table it1 index lv_lines.
MAX = IT1-F1.
Regards,
Rich Heilman

Match fields from the same table

Hi,
I have a table:
ID|TEXT1 |TEXT2
----------|------|---------------
1|1 |1
2|1 |0
3|1 |1
4|1 |0
5|1 |0
I want to match fields with the same text1 value bu without duplicates
I tried this:
select t1.id, t2.id from dane_testowe t1 left join dane_testowe t2 on t1.text1 = t2.text1 where t1.id <> t2.id;
but I got 20 rows (should be 10)
ID| ID
----------|----------
5| 1
4| 1
3| 1
2| 1
5| 2
4| 2
3| 2
1| 2
5| 3
4| 3
2| 3
1| 3
5| 4
3| 4
2| 4
1| 4
4| 5
3| 5
2| 5
1| 5
I'm new at pl/sql (sql), so could You explain me where is mistake?
Thanks in advance

I want to get only one combination like this
ID| ID
----------|----------
5| 1
4| 1
3| 1
2| 1
5| 2
4| 2
3| 2
5| 3
4| 3
For ex I don't want 2| 1 and 1| 2

How to add a field from BSAK/BSIK table in FI_AP_4 Data source

Hi Experts.
I need to add a field in FI_AP_4 data source.
Can you provide me steps in detail to do so, any sample for ABAP code too. field name is XZAHL and it is in multiple tables.
Thanks
mihameed

hi Amams
check this link
Adding Fields to Sales order
i think it may give u some idea
Regards,
Naveen

Delete a content of field from a database table

Hi All,
i want to delete a content of field mtart from mara where matnr = 0000001.
plz help me out ASAP plz also provide a piece of code for doing so....
Thanks and Regards.
Ashu Singh.

Hi,
You Can Do Like This,
Parameters p_matnr type mara-matnr.
Delete from mara where matnr eq p_matnr.
Try This

Transfering multiple fields from help in table control

Hi everyone.
I have a table control in a dynpro.
The table control has many fields: x, y, z ...
I have a module in PROCESS ON VALUE REQUEST for a field "x".
The module calls a function to search values for field "x" and for field "y".
How can I transfer the value of field "y" to the screen?
I know that I can use the function DYNP_VALUES_UPDATE but it updates the field "y" in the wrong position of the table.
Thanks so much for your help.

Hi Sara
It seems you are a new member; welcome to SDN forums. According to SDN customs, you can assign points to posts to thank people. You can do this by clicking the yellow star icon at header of each post. You can assign;
- one 10 points (solved)
- two 6 points (very helpful answer)
- many 2 points (helpful answer)
Kind regards...
*--Serdar

Referencing a field from a resource table to a task table

Similar Messages

Maybe you are looking for