Refresh memory
Hi,
I want to refresh MEMORY after using FUNCTION 'LIST_FROM_MEMORY'.
Can anybody give me a guidance or a hint.
Best regards.
Hi,
You can do below
call function 'LIST_FROM_MEMORY'
tables
listobject = list_pdata
exceptions
not_found = 1
others = 2
if sy-subrc = 0.
call function 'WRITE_LIST'
tables
listobject = list_pdata
exceptions
empty_list = 1
others = 2
if sy-subrc NE 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
CALL FUNCTION LIST_FREE_MEMORY. "here free meory
endif.
endif.
Thanks!
Edited by: Prasanth on Mar 13, 2009 3:54 PM
Similar Messages
-
BW on HANA refresh - memory uplift needed in the target?
Hi,
We are planning to refresh our production BW on HANA system to a test system using DB copy method. Currently the production backup size is 1.6 TB, current memory usage is 1.1 TB & peak memory usage is 1.7 TB.
In the test system, we have only 1 TB memory. In order to do the HANA copy, do we need to uplift the memory? Or just the file system uplift to match the production HANA appliance would be sufficient?hi,
I have never faced this scenario , But I feel it will work in your case.
You can restrict the automatic loading of table to memory.it will save your memory utilization.
How to free up memory in HANA? Is it possible to unload Table from memory?
4) Set your tables not to automatically load
You can configure tables in HANA not to automatically pre-load on startup using: ALTER TABLE table_name PRELOAD NONE. This is good practice in development systems, because it means you can restart the HANA system faster (as tables won't be preloaded) and HANA uses less memory by default.
BR
AKJ -
How to refresh .properties files.
Hi,
I am using Struts 2.0.
Here is my question:
I have admin. section where I have provided facility to change the caption of label displayed at public side.
Name of labels come from .properties file. Now using Property object I access my resourse file & using setProperty() method I have changed value of respective key.
To get conformation that changes are affected I have openned this file & diplayed it on console. Changes are made successfully but when I see the label of public side, they are unchanged (After refreshing web page).
According to my knowledge, when ever application is loaded first contents of .properties file are loaded in memory, so even if we change the file contents, references present in memory are not changed.
Is there any way by which I can refresh memory content.
Since .properties file is change but its change are not affected on memory.
Possible solution for it is that I shall restart my application. Is that possible by programming.
Any other solutions will be appreciated.Yes,
.properties files is updated perfectly.
One of the thing which I noticed is that when I openned .properties file to check updates and close it, Now I pressed refresh button, Change are found to be made on Browser.
But next time I again made changes but didn't open .properties file & pressed refresh button no changes where made on browser.
So I found that by openning file explicitly change are made in browser,
Keeping this thing in mind I created on File object & displayed entire file on console.
It showed changed file content, but changes are not found on Browser.
So whats exactly happening here? -
Advice for a PC configuration upgrade for Adobe Creative Cloud, please?
Hi everyone,
For the moment I have an old PC (bought in April 2008) and maybe if you eventually help me I could have a more powerful machine. I am asking you five questions at then end of this post, so if someone can reply it would help me and be greatful.
Here is the resume of the configuration of my desktop
--------[ Operating System ]---------------------------------------------------------------------------------------- ----
Operating System Properties:
OS Name Microsoft Windows 8.1 Professional
OS Language English (United Kingdom)
OS Installer Language English (United Kingdom)
OS Kernel Type Multiprocessor Free (64-bit)
OS Version 6.3.9600.16452 (Win8.1 RTM)
OS Service Pack -
OS Root C:\WINDOWS
Components Version:
Common Controls 6.16
Windows Mail 6.3.9600.16384 (winblue_rtm.130821-1623)
Windows Media Player 12.0.9600.16384 (winblue_rtm.130821-1623)
Windows Messenger -
MSN Messenger -
Internet Information Services (IIS) -
.NET Framework 4.0.30319.33440 built by: FX45W81RTMREL
Novell Client -
DirectX DirectX 11.0
OpenGL 6.3.9600.16384 (winblue_rtm.130821-1623)
ASPI -
Operating System Features:
Debug Version No
DBCS Version No
Domain Controller No
Security Present No
Network Present Yes
Remote Session No
Safe Mode No
Slow Processor No
Terminal Services Yes
--------[ Motherboard ]---------------------------------------------------------------------------------------- ---------
Motherboard Properties:
Motherboard ID 06/19/2009-P35-ICH9-6A89OG0PC-00
Motherboard Name Gigabyte GA-EP35-DS4
Front Side Bus Properties:
Bus Type Intel AGTL+
Bus Width 64-bit
Real Clock 333 MHz (QDR)
Effective Clock 1333 MHz
Bandwidth 10667 MB/s
Memory Bus Properties:
Bus Type Dual DDR2 SDRAM
Bus Width 128-bit
DRAM:FSB Ratio 12:10
Real Clock 400 MHz (DDR)
Effective Clock 800 MHz
Bandwidth 12800 MB/s
Chipset Bus Properties:
Bus Type Intel Direct Media Interface
Motherboard Physical Info:
CPU Sockets/Slots 1 LGA775
Expansion Slots 2 PCI, 3 PCI-E x1, 2 PCI-E x16
RAM Slots 4 DDR2 DIMM
Integrated Devices Audio, Gigabit LAN, IEEE-1394
Form Factor ATX
Motherboard Size 240 mm x 300 mm
Motherboard Chipset P35
Extra Features Dynamic Energy Saver, SATA-II, RAID
Motherboard Manufacturer:
Company Name Gigabyte Technology Co., Ltd.
--------[ CPU ]---------------------------------------------------------------------------------------- -----------------
CPU Properties:
CPU Type DualCore Intel Core 2 Duo E8400, 3000 MHz (9 x 333)
CPU Alias Wolfdale
CPU Stepping C0
Instruction Set x86, x86-64, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1
Original Clock 3000 MHz
Min / Max CPU Multiplier 6x / 9x
Engineering Sample No
L1 Code Cache 32 KB per core
L1 Data Cache 32 KB per core
L2 Cache 6 MB (On-Die, ECC, ASC, Full-Speed)
CPU Physical Info:
Package Type 775 Contact FC-LGA8
Package Size 37.5 mm x 37.5 mm
Transistors 410 million
Process Technology 45 nm, CMOS, Cu, High-K + Metal Gate
Die Size 107 mm2
Core Voltage 1.113 - 1.225 V
I/O Voltage 1.113 - 1.225 V
Typical Power 65 W @ 3.00 GHz
Maximum Power 91.9 W @ 3.00 GHz
CPU Manufacturer:
Company Name Intel Corporation
Product Information http://ark.intel.com/search.aspx?q=Intel Core 2 Duo E8400
Multi CPU:
Motherboard ID OEM00000 PROD00000000
CPU #1 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 3000 MHz
CPU #2 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 3000 MHz
CPU Utilization:
CPU #1 / Core #1 0 %
CPU #1 / Core #2 0 %
--------[ Windows Video ]---------------------------------------------------------------------------------------- -------
[ NVIDIA Quadro 2000 ]
Video Adapter Properties:
Device Description NVIDIA Quadro 2000
Adapter String Quadro 2000
BIOS String Version 70.6.41.0.6
Chip Type Quadro 2000
DAC Type Integrated RAMDAC
Driver Date 29/09/2013
Driver Version 9.18.13.2739 - nVIDIA ForceWare 327.39
Driver Provider NVIDIA
Memory Size 1 GB
Installed Drivers:
nvd3dumx 9.18.13.2739
nvwgf2umx 9.18.13.2739
nvwgf2umx 9.18.13.2739
nvd3dum 9.18.13.2739 - nVIDIA ForceWare 327.39
nvwgf2um 9.18.13.2739
nvwgf2um 9.18.13.2739
Video Adapter Manufacturer:
Company Name NVIDIA Corporation
[ NVIDIA Quadro 2000 ]
Video Adapter Properties:
Device Description NVIDIA Quadro 2000
Adapter String Quadro 2000
BIOS String Version 70.6.41.0.6
Chip Type Quadro 2000
DAC Type Integrated RAMDAC
Driver Date 29/09/2013
Driver Version 9.18.13.2739 - nVIDIA ForceWare 327.39
Driver Provider NVIDIA
Memory Size 1 GB
Installed Drivers:
nvd3dumx 9.18.13.2739
nvwgf2umx 9.18.13.2739
nvwgf2umx 9.18.13.2739
nvd3dum 9.18.13.2739 - nVIDIA ForceWare 327.39
nvwgf2um 9.18.13.2739
nvwgf2um 9.18.13.2739
Video Adapter Manufacturer:
Company Name NVIDIA Corporation
Product Information http://www.nvidia.com/page/products.html
--------[ Physical Drives ]---------------------------------------------------------------------------------------- -----
HDDs :
. 2 HDDs 2 x 1 TB SATA-II RAID 0 for video editing, the OS and software
. 1 HDD 2 TB SATA-II for backups
. 1 HDD 2 TB SATA-III for backups off site + Archive
[ Drive #1 - Intel Raid 0 Volume (1863 GB) ]
#1 (Active) NTFS 1 MB 350 MB
#2 NTFS C: 351 MB 1907380 MB
[ Drive #2 - WDC WD20EZRX-00D8PB0 (1863 GB) ]
#1 MS Reserved 0 MB 128 MB
#2 Basic Data G: (Archives) 129 MB 1907600 MB
[ Drive #3 - Hitachi HDS722020ALA330 (1863 GB) ]
#1 NTFS D: (Backup) 1 MB 1907727 MB
--------[ Memory ]---------------------------------------------------------------------------------------- --------------
Physical Memory:
Total 8190 MB
Used 3334 MB
Free 4856 MB
Utilization 41 %
Swap Space:
Total 9470 MB
Used 4131 MB
Free 5340 MB
Utilization 44 %
Virtual Memory:
Total 17661 MB
Used 7465 MB
Free 10196 MB
Utilization 42 %
Paging File:
Paging File C:\pagefile.sys
Current Size 1280 MB
Current / Peak Usage 243 MB / 700 MB
Utilization 19 %
Physical Address Extension (PAE):
Supported by Operating System Yes
Supported by CPU Yes
Active Yes
--------[ SPD ]---------------------------------------------------------------------------------------- -----------------
[ DIMM1: GeIL CL5-5-5 DDR2-800 ]
Memory Module Properties:
Module Name GeIL CL5-5-5 DDR2-800
Serial Number None
Manufacture Date Week 44 / 2009
Module Size 2 GB (2 ranks, 8 banks)
Module Type Unbuffered DIMM
Memory Type DDR2 SDRAM
Memory Speed DDR2-800 (400 MHz)
Module Width 64 bit
Module Voltage SSTL 1.8
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Memory Timings:
@ 400 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 23-51-3-6-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 333 MHz 4-5-5-13 (CL-RCD-RP-RAS) / 20-43-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 266 MHz 3-4-4-10 (CL-RCD-RP-RAS) / 16-34-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)
Memory Module Features:
Analysis Probe Not Present
FET Switch External Disabled
Weak Driver Supported
Memory Module Manufacturer:
Company Name Golden Emperor International Ltd.
Product Information http://www.geil.com.tw/products
[ DIMM2: GeIL CL5-5-5DDR2800 5 ]
Memory Module Properties:
Module Name GeIL CL5-5-5DDR2800 5
Serial Number 00000005h (83886080)
Module Size 2 GB (2 ranks, 8 banks)
Module Type Unbuffered DIMM
Memory Type DDR2 SDRAM
Memory Speed DDR2-800 (400 MHz)
Module Width 64 bit
Module Voltage SSTL 1.8
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Memory Timings:
@ 400 MHz 5-5-5-18 (CL-RCD-RP-RAS) / 23-51-3-6-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 266 MHz 4-4-4-12 (CL-RCD-RP-RAS) / 16-34-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)
@ 200 MHz 3-3-3-9 (CL-RCD-RP-RAS) / 12-26-2-3-2-2 (RC-RFC-RRD-WR-WTR-RTP)
Memory Module Features:
Analysis Probe Not Present
FET Switch External Disabled
Weak Driver Supported
Memory Module Manufacturer:
Company Name Golden Emperor International Ltd.
Product Information http://www.geil.com.tw/products
[ DIMM3: GeIL CL5-5-5 DDR2-800 ]
Memory Module Properties:
Module Name GeIL CL5-5-5 DDR2-800
Serial Number None
Manufacture Date Week 44 / 2009
Module Size 2 GB (2 ranks, 8 banks)
Module Type Unbuffered DIMM
Memory Type DDR2 SDRAM
Memory Speed DDR2-800 (400 MHz)
Module Width 64 bit
Module Voltage SSTL 1.8
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Memory Timings:
@ 400 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 23-51-3-6-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 333 MHz 4-5-5-13 (CL-RCD-RP-RAS) / 20-43-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 266 MHz 3-4-4-10 (CL-RCD-RP-RAS) / 16-34-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)
Memory Module Features:
Analysis Probe Not Present
FET Switch External Disabled
Weak Driver Supported
Memory Module Manufacturer:
Company Name Golden Emperor International Ltd.
Product Information http://www.geil.com.tw/products
[ DIMM4: GeIL CL5-5-5DDR2800 5 ]
Memory Module Properties:
Module Name GeIL CL5-5-5DDR2800 5
Serial Number 00000005h (83886080)
Module Size 2 GB (2 ranks, 8 banks)
Module Type Unbuffered DIMM
Memory Type DDR2 SDRAM
Memory Speed DDR2-800 (400 MHz)
Module Width 64 bit
Module Voltage SSTL 1.8
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Memory Timings:
@ 400 MHz 5-5-5-18 (CL-RCD-RP-RAS) / 23-51-3-6-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 266 MHz 4-4-4-12 (CL-RCD-RP-RAS) / 16-34-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)
@ 200 MHz 3-3-3-9 (CL-RCD-RP-RAS) / 12-26-2-3-2-2 (RC-RFC-RRD-WR-WTR-RTP)
Memory Module Features:
Analysis Probe Not Present
FET Switch External Disabled
Weak Driver Supported
Memory Module Manufacturer:
Company Name Golden Emperor International Ltd.
Product Information http://www.geil.com.tw/products
--------[ Windows Audio ]---------------------------------------------------------------------------------------- -------
midi-out.0 0001 001B Microsoft GS Wavetable Synth
mixer.0 0001 FFFF Speakers (5- High Definition Au
mixer.1 0001 FFFF Digital Audio (S/PDIF) (5- High
mixer.2 0001 FFFF W240D DVI (4- High Definition A
mixer.5 0001 FFFF Microphone (5- High Definition
wave-in.0 0001 FFFF Microphone (5- High Definition
wave-in.1 0001 FFFF Digital Audio (S/PDIF) (5- High
wave-in.2 0001 FFFF Line In (5- High Definition Aud
wave-out.0 0001 FFFF Speakers (5- High Definition Au
wave-out.1 0001 FFFF Digital Audio (S/PDIF) (5- High
wave-out.2 0001 FFFF W240D DVI (4- High Definition A
--------[ PCI / PnP Audio ]---------------------------------------------------------------------------------------- -----
nVIDIA HDMI/DP @ nVIDIA GF106 - High Definition Audio Controller PCI
nVIDIA HDMI/DP @ nVIDIA GF106 - High Definition Audio Controller PCI
nVIDIA HDMI/DP @ nVIDIA GF106 - High Definition Audio Controller PCI
nVIDIA HDMI/DP @ nVIDIA GF106 - High Definition Audio Controller PCI
Realtek ALC889A @ Intel 82801IB ICH9 - High Definition Audio Controller [A-2] PCI
--------[ HD Audio ]---------------------------------------------------------------------------------------- ------------
[ Intel 82801IB ICH9 - High Definition Audio Controller [A-2] ]
Device Properties:
Device Description Intel 82801IB ICH9 - High Definition Audio Controller [A-2]
Device Description (Windows) Contrôleur High Definition Audio
Bus Type PCI
Bus / Device / Function 0 / 27 / 0
Device ID 8086-293E
Subsystem ID 1458-A022
Revision 02
Hardware ID PCI\VEN_8086&DEV_293E&SUBSYS_A0221458&REV_02
Device Manufacturer:
Company Name Intel Corporation
Product Information http://www.intel.com/products/chipsets
[ Realtek ALC889A ]
Device Properties:
Device Description Realtek ALC889A
Device Description (Windows) Périphérique High Definition Audio
Device Type Audio
Bus Type HDAUDIO
Device ID 10EC-0885
Subsystem ID 1458-A002
Revision 1001
Hardware ID HDAUDIO\FUNC_01&VEN_10EC&DEV_0885&SUBSYS_1458A002&REV_1001
Device Manufacturer:
Company Name Realtek Semiconductor Corp.
Product Information http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PNid=8&PFid=14&Level=3&Conn= 2
[ nVIDIA GF106 - High Definition Audio Controller ]
Device Properties:
Device Description nVIDIA GF106 - High Definition Audio Controller
Device Description (Windows) Contrôleur High Definition Audio
Bus Type PCI
Bus / Device / Function 1 / 0 / 1
Device ID 10DE-0BE9
Subsystem ID 103C-084A
Revision A1
Hardware ID PCI\VEN_10DE&DEV_0BE9&SUBSYS_084A103C&REV_A1
Device Manufacturer:
Company Name NVIDIA Corporation
[ nVIDIA HDMI/DP ]
Device Properties:
Device Description nVIDIA HDMI/DP
Device Description (Windows) Périphérique High Definition Audio
Device Type Audio
Bus Type HDAUDIO
Device ID 10DE-0011
Subsystem ID 10DE-0101
Revision 1001
Hardware ID HDAUDIO\FUNC_01&VEN_10DE&DEV_0011&SUBSYS_10DE0101&REV_1001
Device Manufacturer:
Company Name NVIDIA Corporation
[ nVIDIA HDMI/DP ]
Device Properties:
Device Description nVIDIA HDMI/DP
Device Description (Windows) Périphérique High Definition Audio
Device Type Audio
Bus Type HDAUDIO
Device ID 10DE-0011
Subsystem ID 10DE-0101
Revision 1001
Hardware ID HDAUDIO\FUNC_01&VEN_10DE&DEV_0011&SUBSYS_10DE0101&REV_1001
Device Manufacturer:
Company Name NVIDIA Corporation
[ nVIDIA HDMI/DP ]
Device Properties:
Device Description nVIDIA HDMI/DP
Device Description (Windows) Périphérique High Definition Audio
Device Type Audio
Bus Type HDAUDIO
Device ID 10DE-0011
Subsystem ID 10DE-0101
Revision 1001
Hardware ID HDAUDIO\FUNC_01&VEN_10DE&DEV_0011&SUBSYS_10DE0101&REV_1001
Device Manufacturer:
Company Name NVIDIA Corporation
[ nVIDIA HDMI/DP ]
Device Properties:
Device Description nVIDIA HDMI/DP
Device Description (Windows) Périphérique High Definition Audio
Device Type Audio
Bus Type HDAUDIO
Device ID 10DE-0011
Subsystem ID 10DE-0101
Revision 1001
Hardware ID HDAUDIO\FUNC_01&VEN_10DE&DEV_0011&SUBSYS_10DE0101&REV_1001
Device Manufacturer:
Company Name NVIDIA Corporation
October 26th, 2012 Microsoft told me with "Microsoft Update Advisor" that I could upgraded my OS from Windows 7 Pro 64 bits to Windows 8 Pro 64 bits and after one year with another "Microsoft Upgrade Advisor" Microsoft told me again to upgrade my OS from Windows 8 Pro 64 bits to Windows 8.1 Pro 64 bits, but Gigabyte does not give the drivers on their website for my motherboard neither for Windows 8 and neither for Windows 8.1 and the system is however liable.
If I believe Gigabyte I need to purchase a new motherboard and probably a new CPU and new RAM.
1) Do you agree with Gigabyte or with Microsoft?
2) If we believe Gigabyte, so can you tell me what king of CPU and motherboard to choose for video editing and video encoding, please?
In the past, I had followed Adobe advices to use a Nvidia Quadro 2000 video card and HDDs in RAID 0 for video editing and video encoding.
Moreover, Microsoft recommends to use a SSD for Windows 8.1.
3) So, do you think I really need a SSD, with which capacity (256 or 512 GB ?) and which brand?
4) A SSD for the OS and software and HDDs in RAID 0 for video editing?
I edit HD (1600 x 1080 pixels) and I plan a budget between 450 and 650 $ for upgrading my PC.
Maybe I can only buy one new motherboard for 200 $, keeping my CPU and my RAM and buy a SSD 480 GB for 333 $ (total 200 + 333 = 533 $).
5) Do you agree with me for buying just only a motherboard and a SSD ?
Thank you in advance if someone can help me.
Otherwise my configuration seems to comply with http://www.adobe.com/products/creativecloud/tech-specs.html I have only a doubt for the sound.
Best regards
PS: the names of actual companies and products mentioned herein may be the trademarks of their respective owners.Hello Isidore,
I can answer questions 3 and 4, as I have that sort of setup.
3.) No, you don't really need an SSD, but I would certainly recommend that you buy one. You'll notice a huge difference in the amount of time it takes to boot. I bought the OCZ Vertex 3 (120GB) a while back, and it's very fast. Whether or not you should get one just depends on whether the speed is worth it to you, but if I were you, I would.
As for the size, that depends on exactly what you'll use it for. See number 4 below.
4.) Yes, that's my setup. The SSD is my primary drive, and my HDD is for everything else. Here's basically how I have everything setup:
When I finish a day of shooting, I copy all my footage into a special folder (I named it "IMPORT" since I use it often) on my SSD. I do this because the clips load much faster in Prelude and Premiere Pro. Then, after I finish and export the project, I move all the original files onto my HDD. I would still do this even I had a larger SSD, because it's always good to keep your primary drives clean.
I also set the render and cache directories to those that I create on my HDD, because for longer projects, my SSD would fill up quickly, so that's why you may want to consider buying a larger SSD (even though 128GB would probably work just fine).
I hope this helped a little!
~Josh -
Advice for a new PC configuration for Adobe Creative Cloud, please?
Dear sir or madam,
For the moment I have an old PC (buy in April 2008) and perhaps if you help me I could have a more powerful machine.
Here is the resume of the configuration of my desktop
--------[ Operating System ]---------------------------------------------------------------------------------------- ----
Operating System Properties:
OS Name Microsoft Windows 8.1 Professional
OS Language Français (France)
OS Installer Language Anglais (Royaume-Uni)
OS Kernel Type Multiprocessor Free (64-bit)
OS Version 6.3.9600.16452 (Win8.1 RTM)
OS Service Pack -
OS Installation Date 21/02/2014
OS Root C:\WINDOWS
Components Version:
Common Controls 6.16
Windows Mail 6.3.9600.16384 (winblue_rtm.130821-1623)
Windows Media Player 12.0.9600.16384 (winblue_rtm.130821-1623)
Windows Messenger -
MSN Messenger -
Internet Information Services (IIS) -
.NET Framework 4.0.30319.33440 built by: FX45W81RTMREL
Novell Client -
DirectX DirectX 11.0
OpenGL 6.3.9600.16384 (winblue_rtm.130821-1623)
ASPI -
Operating System Features:
Debug Version No
DBCS Version No
Domain Controller No
Security Present No
Network Present Yes
Remote Session No
Safe Mode No
Slow Processor No
Terminal Services Yes
--------[ Motherboard ]---------------------------------------------------------------------------------------- ---------
Motherboard Properties:
Motherboard ID 06/19/2009-P35-ICH9-6A89OG0PC-00
Motherboard Name Gigabyte GA-EP35-DS4
Front Side Bus Properties:
Bus Type Intel AGTL+
Bus Width 64-bit
Real Clock 333 MHz (QDR)
Effective Clock 1333 MHz
Bandwidth 10667 MB/s
Memory Bus Properties:
Bus Type Dual DDR2 SDRAM
Bus Width 128-bit
DRAM:FSB Ratio 12:10
Real Clock 400 MHz (DDR)
Effective Clock 800 MHz
Bandwidth 12800 MB/s
Chipset Bus Properties:
Bus Type Intel Direct Media Interface
Motherboard Physical Info:
CPU Sockets/Slots 1 LGA775
Expansion Slots 2 PCI, 3 PCI-E x1, 2 PCI-E x16
RAM Slots 4 DDR2 DIMM
Integrated Devices Audio, Gigabit LAN, IEEE-1394
Form Factor ATX
Motherboard Size 240 mm x 300 mm
Motherboard Chipset P35
Extra Features Dynamic Energy Saver, SATA-II, RAID
Motherboard Manufacturer:
Company Name Gigabyte Technology Co., Ltd.
--------[ CPU ]---------------------------------------------------------------------------------------- -----------------
CPU Properties:
CPU Type DualCore Intel Core 2 Duo E8400, 3000 MHz (9 x 333)
CPU Alias Wolfdale
CPU Stepping C0
Instruction Set x86, x86-64, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1
Original Clock 3000 MHz
Min / Max CPU Multiplier 6x / 9x
Engineering Sample No
L1 Code Cache 32 KB per core
L1 Data Cache 32 KB per core
L2 Cache 6 MB (On-Die, ECC, ASC, Full-Speed)
CPU Physical Info:
Package Type 775 Contact FC-LGA8
Package Size 37.5 mm x 37.5 mm
Transistors 410 million
Process Technology 45 nm, CMOS, Cu, High-K + Metal Gate
Die Size 107 mm2
Core Voltage 1.113 - 1.225 V
I/O Voltage 1.113 - 1.225 V
Typical Power 65 W @ 3.00 GHz
Maximum Power 91.9 W @ 3.00 GHz
CPU Manufacturer:
Company Name Intel Corporation
Product Information http://ark.intel.com/search.aspx?q=Intel Core 2 Duo E8400
Driver Update http://www.aida64.com/driver-updates
Multi CPU:
Motherboard ID OEM00000 PROD00000000
CPU #1 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 3000 MHz
CPU #2 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 3000 MHz
CPU Utilization:
CPU #1 / Core #1 0 %
CPU #1 / Core #2 0 %
--------[ Windows Video ]---------------------------------------------------------------------------------------- -------
[ NVIDIA Quadro 2000 ]
Video Adapter Properties:
Device Description NVIDIA Quadro 2000
Adapter String Quadro 2000
BIOS String Version 70.6.41.0.6
Chip Type Quadro 2000
DAC Type Integrated RAMDAC
Driver Date 29/09/2013
Driver Version 9.18.13.2739 - nVIDIA ForceWare 327.39
Driver Provider NVIDIA
Memory Size 1 GB
Installed Drivers:
nvd3dumx 9.18.13.2739
nvwgf2umx 9.18.13.2739
nvwgf2umx 9.18.13.2739
nvd3dum 9.18.13.2739 - nVIDIA ForceWare 327.39
nvwgf2um 9.18.13.2739
nvwgf2um 9.18.13.2739
Video Adapter Manufacturer:
Company Name NVIDIA Corporation
[ NVIDIA Quadro 2000 ]
Video Adapter Properties:
Device Description NVIDIA Quadro 2000
Adapter String Quadro 2000
BIOS String Version 70.6.41.0.6
Chip Type Quadro 2000
DAC Type Integrated RAMDAC
Driver Date 29/09/2013
Driver Version 9.18.13.2739 - nVIDIA ForceWare 327.39
Driver Provider NVIDIA
Memory Size 1 GB
Installed Drivers:
nvd3dumx 9.18.13.2739
nvwgf2umx 9.18.13.2739
nvwgf2umx 9.18.13.2739
nvd3dum 9.18.13.2739 - nVIDIA ForceWare 327.39
nvwgf2um 9.18.13.2739
nvwgf2um 9.18.13.2739
Video Adapter Manufacturer:
Company Name NVIDIA Corporation
Product Information http://www.nvidia.com/page/products.html
--------[ Physical Drives ]---------------------------------------------------------------------------------------- -----
HDDs :
. 2 HDDs 2 x 1 TB SATA-II RAID 0 for Editing video with Premiere Pro CC
. 1 HDD 2 TB SATA-II for backups
. 1 HDD 2 TB SATA-III for backups off site + Archive
[ Drive #1 - Intel Raid 0 Volume (1863 GB) ]
#1 (Active) NTFS 1 MB 350 MB
#2 NTFS C: 351 MB 1907380 MB
[ Drive #2 - WDC WD20EZRX-00D8PB0 (1863 GB) ]
#1 MS Reserved 0 MB 128 MB
#2 Basic Data G: (Archives) 129 MB 1907600 MB
[ Drive #3 - Hitachi HDS722020ALA330 (1863 GB) ]
#1 NTFS D: (Backup) 1 MB 1907727 MB
--------[ Memory ]---------------------------------------------------------------------------------------- --------------
Physical Memory:
Total 8190 MB
Used 3334 MB
Free 4856 MB
Utilization 41 %
Swap Space:
Total 9470 MB
Used 4131 MB
Free 5340 MB
Utilization 44 %
Virtual Memory:
Total 17661 MB
Used 7465 MB
Free 10196 MB
Utilization 42 %
Paging File:
Paging File C:\pagefile.sys
Current Size 1280 MB
Current / Peak Usage 243 MB / 700 MB
Utilization 19 %
Physical Address Extension (PAE):
Supported by Operating System Yes
Supported by CPU Yes
Active Yes
--------[ SPD ]---------------------------------------------------------------------------------------- -----------------
[ DIMM1: GeIL CL5-5-5 DDR2-800 ]
Memory Module Properties:
Module Name GeIL CL5-5-5 DDR2-800
Serial Number None
Manufacture Date Week 44 / 2009
Module Size 2 GB (2 ranks, 8 banks)
Module Type Unbuffered DIMM
Memory Type DDR2 SDRAM
Memory Speed DDR2-800 (400 MHz)
Module Width 64 bit
Module Voltage SSTL 1.8
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Memory Timings:
@ 400 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 23-51-3-6-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 333 MHz 4-5-5-13 (CL-RCD-RP-RAS) / 20-43-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 266 MHz 3-4-4-10 (CL-RCD-RP-RAS) / 16-34-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)
Memory Module Features:
Analysis Probe Not Present
FET Switch External Disabled
Weak Driver Supported
Memory Module Manufacturer:
Company Name Golden Emperor International Ltd.
Product Information http://www.geil.com.tw/products
[ DIMM2: GeIL CL5-5-5DDR2800 5 ]
Memory Module Properties:
Module Name GeIL CL5-5-5DDR2800 5
Serial Number 00000005h (83886080)
Module Size 2 GB (2 ranks, 8 banks)
Module Type Unbuffered DIMM
Memory Type DDR2 SDRAM
Memory Speed DDR2-800 (400 MHz)
Module Width 64 bit
Module Voltage SSTL 1.8
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Memory Timings:
@ 400 MHz 5-5-5-18 (CL-RCD-RP-RAS) / 23-51-3-6-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 266 MHz 4-4-4-12 (CL-RCD-RP-RAS) / 16-34-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)
@ 200 MHz 3-3-3-9 (CL-RCD-RP-RAS) / 12-26-2-3-2-2 (RC-RFC-RRD-WR-WTR-RTP)
Memory Module Features:
Analysis Probe Not Present
FET Switch External Disabled
Weak Driver Supported
Memory Module Manufacturer:
Company Name Golden Emperor International Ltd.
Product Information http://www.geil.com.tw/products
[ DIMM3: GeIL CL5-5-5 DDR2-800 ]
Memory Module Properties:
Module Name GeIL CL5-5-5 DDR2-800
Serial Number None
Manufacture Date Week 44 / 2009
Module Size 2 GB (2 ranks, 8 banks)
Module Type Unbuffered DIMM
Memory Type DDR2 SDRAM
Memory Speed DDR2-800 (400 MHz)
Module Width 64 bit
Module Voltage SSTL 1.8
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Memory Timings:
@ 400 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 23-51-3-6-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 333 MHz 4-5-5-13 (CL-RCD-RP-RAS) / 20-43-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 266 MHz 3-4-4-10 (CL-RCD-RP-RAS) / 16-34-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)
Memory Module Features:
Analysis Probe Not Present
FET Switch External Disabled
Weak Driver Supported
Memory Module Manufacturer:
Company Name Golden Emperor International Ltd.
Product Information http://www.geil.com.tw/products
[ DIMM4: GeIL CL5-5-5DDR2800 5 ]
Memory Module Properties:
Module Name GeIL CL5-5-5DDR2800 5
Serial Number 00000005h (83886080)
Module Size 2 GB (2 ranks, 8 banks)
Module Type Unbuffered DIMM
Memory Type DDR2 SDRAM
Memory Speed DDR2-800 (400 MHz)
Module Width 64 bit
Module Voltage SSTL 1.8
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Memory Timings:
@ 400 MHz 5-5-5-18 (CL-RCD-RP-RAS) / 23-51-3-6-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 266 MHz 4-4-4-12 (CL-RCD-RP-RAS) / 16-34-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)
@ 200 MHz 3-3-3-9 (CL-RCD-RP-RAS) / 12-26-2-3-2-2 (RC-RFC-RRD-WR-WTR-RTP)
Memory Module Features:
Analysis Probe Not Present
FET Switch External Disabled
Weak Driver Supported
Memory Module Manufacturer:
Company Name Golden Emperor International Ltd.
Product Information http://www.geil.com.tw/products
Microsoft told me with Microsoft Update Advisor that I could upgraded from Windows 7 Pro 64 bits to Windows 8 Pro 64 bits and after one year with another Microsoft Upgrade Advisor from Windows 8 Pro 64 bits to Windows 8.1 Pro 64 bits. But Gigabyte does not give the drivers on their website for this motherboard that support Windows 8 and Windows 8.1.
I think I should purchase a new motherboard, a new CPU and new RAM. Do you agree? If yes, so can you tell me what king of CPU and motherboard to choose for Creative Cloud, please? I had followed Adobe advices to use a Nvidia Quadro 2000 graphic card and HDDs in RAID 0 for editing video.
Moreover Microsoft recommend to use a SSD for Windows 8.1. So, do I really need a SSD, with which capacity and which brand?
Thank you if someone can help me.
Yours faithfully
The names of actual companies and products mentioned herein may be the trademarks of their respective owners.Hi Isidore,
Please refer the link: http://www.adobe.com/products/creativecloud/tech-specs.html with system requirements to run the CC app's.
Regards,
Romit Sinha -
Booting Problems
Help !! my new K8N does not boot from Hard Disk (sorry for very bad english)
My bios detect
Ide Primary MAster : Maxtor 40 Gb -34098H4 5400 rpm Ultra-ATA/100
Ide Primary Slave : ---
Ide Secondary Master : Seagate 120 gb Barracuda - st3120026a 7200 rpm
Ide Secondary Slave : CD-Rom Sony
1st/2nd/3rd Boot Device :Floppy / CD-ROM / Hard Drive
I Format my first partition in NTFS (maxtor) installing XP then not Boot from my hard disk ...only boot from my bootable Xp CD
When i boot up it says
"Verifying DMI Pool Data ..........
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER"
Finally work!! ...but only work if I turn off Secondary Master & Slave in Bios ==> (NONE)
I change my the IDE HDD cable , jumpers , etc
The memory works good in my old PC (athlon 2.0 hs -MSI k4 ultra)
any suggestion , idea or opinion ? Thanks
CPU AMD Athlon™ 64 Processor 3200+ Newcastle
BIOS Award Phoenix - AwardBIOS v6.00PG
BIOS Award W7030NMS V1.4 082604
MSI K8N Neo Platinum (nVIDIA nForce3-S, AMD Hammer)
Soundblaster Live 5.1
Font Vitsuba Vtx-45-C (450 w)
ATI Radeon 9600 XT 128 mb (RV360) (Asus A9600XT) Internal DAC(400MHz)
Samsung SyncMaster 905DF(X)/955DF(X)/MagicSyncMaster CD195A
Microsoft Windows XP Professional V5.1.2600 (WinXP Retail)
Service Pack 1
DIMM 1
Module Name SMT-OF-AMERICA
Module Size 256 MB (1 rows, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Memory Speed PC2700 (166 MHz)
Module Width 64 bit
Module Voltage SSTL 2.5
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Memory Timings
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
@ 133 MHz 2.0-3-3-6 (CL-RCD-RP-RAS)
DIMM 2
Memory Module Properties
Module Name SpecTek
Module Size 256 MB (1 rows, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Memory Speed PC2700 (166 MHz)
Module Width 64 bit
Module Voltage SSTL 2.5
Error Detection Method None
Refresh Rate Reduced (7.8 us)
Memory Timings
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
@ 100 MHz 2.0-2-2-5 (CL-RCD-RP-RAS)hi Dzal,
1) Change
1st/2nd/3rd Boot Device :Floppy / CD-ROM / Hard Drive
1st/2nd/3rd Boot Device :Floppy / Hard Drive / CD-ROM
2) Bios
Advanced bios:
Hard Disk Boot Order
1st Maxtor 40 Gb -34098H4 5400 rpm Ultra-ATA/100
2nd Seagate 120 gb Barracuda - st3120026a 7200 rpm
if no [Pageup] [Pagedown] until Maxtor 40 Gb -34098H4 5400 rpm Ultra-ATA/100 top
save & exit
good luck -
Can Oracle set up Oracle Apps and open to public?
Some software packages are just too big or time-consuming to set up and play with. Some are not accessible to users without proper license. Oracle Applications have both of these properties. If Oracle can set up a test site anywhere and give non-sysadmin access to the OTN members, we can benefit by getting familiar with new features or some of the settings done by real experts, or refreshing memory if we haven't used it for a while. Ideally, also give UNIX/Linux shell access to us. HP/Compaq has Oracle test drive (www.testdrive.hp.com). But wouldn't it be better if Oracle does it?
First it sets some environment variables in the shell.
Then it removes a log file.
Then it uses an obsolete tool to export some data.
Then it displays the contents of the log file.
Then it changes the present working directory.
Then it lists the files in the directory.
Then, presumably, it emails a copy of the log file somewhere.
In 10gR2 I would suggest throwing it away and using a proper tool to do the job such as RMAN or DataPump.
Additionally find someone to teach you how to navigate and perform basic tasks in Linux. This may help.
http://www.psoug.org/reference/unix_vi.html
as might Arup Nanda's excellent tutorial here:
http://www.oracle.com/technology/pub/articles/advanced-linux-commands/part1.html -
Writing custom program errors to SLOG
I am looking for a way to put errors from custom program ( which would run as job) to system log, which should be visible via SM21. Can any of you help me with a function module with which I can achieve it ?
Hi Indrade,
Is it your first post in SDN ? Welcome!
for your problem try the following procedure:
1. Refresh memory
CALL FUNCTION 'BAL_GLB_MEMORY_REFRESH'
EXPORTING
* I_AUTHORIZATION =
i_refresh_all = 'X'
* I_T_LOGS_TO_BE_REFRESHED =
EXCEPTIONS
not_authorized = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
2. Create a Log
* define some header data of this log
l_s_log-extnumber = pu_ext_number.
l_s_log-aluser = sy-uname.
l_s_log-alprog = sy-repid.
l_s_log-object = pu_object.
l_s_log-subobject = pu_subobject.
* create a log
CALL FUNCTION 'BAL_LOG_CREATE'
EXPORTING
i_s_log = l_s_log
IMPORTING
e_log_handle = pc_log_handle
EXCEPTIONS
log_header_inconsistent = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
3. Add a message to the Log
DATA:
l_s_msg TYPE bal_s_msg,
l_log_handle TYPE balloghndl.
* define data of message for Application Log
l_s_msg-msgty = pu_msgty.
l_s_msg-msgid = pu_msgid.
l_s_msg-msgno = pu_msgno.
l_s_msg-msgv1 = pu_msgv1.
l_s_msg-msgv2 = pu_msgv2.
l_s_msg-msgv3 = pu_msgv3.
l_s_msg-msgv4 = pu_msgv4.
l_s_msg-probclass = pu_probclass.
l_s_msg-context-value = pu_context.
GET TIME STAMP FIELD l_s_msg-time_stmp.
* add this message to log file
* (I_LOG_HANDLE is not specified, we want to add to the default log.
* If it does not exist we do not care =>EXCEPTIONS log_not_found = 0)
CALL FUNCTION 'BAL_LOG_MSG_ADD'
EXPORTING
i_log_handle = l_log_handle
i_s_msg = l_s_msg
EXCEPTIONS
log_not_found = 0
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
4. Save Log
CALL FUNCTION 'BAL_DB_SAVE'
EXPORTING
i_t_log_handle = p_t_log_handle
EXCEPTIONS
log_not_found = 1
save_not_allowed = 2
numbering_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
I hope it will helps.
Please remember to reward points if the answer is useful, and to close the post when your problem is solved
Regards, Manuel -
Hi,
I have installed Vision Demo of Oracle Apps 11.5.5 on Windows 2000 server.
when I try to open the form People/Enter and Maintain the system shows busy and I am not able to perform any operations.
pls help
ThanksCheck your memory. You may need to re-start your server just to refresh memory resources specially with windows os.
-
[VIA] KT3 Ultra2 - - need to "Assign IRQ to VGA" in Bios but how?
G'day people,
I am having a little drama with the instalation of a new video card. The system recoginses a hardware device, and nVidia WDM Video Capture (Universal) bbut after driver install, I get an error This device cannot start (Code 10). The FAQ over at nVidia says that:
The Code 10 error is most often a result of not having the option "Assign IRQ to VGA" enabled in your motherboards system BIOS.
My problem is I cannot find how to enable this option in bios. Any ideas? Just going to reboot and edit this post with the BIOS version.
Okay.....When I enter Bios the info say AMIBIOS vers 3.31a.
Thanks.Thanks for this help people, I am quite new at this. Only been tinkering for about 5 years.
Quote
That's not the right number, I belive what you are looking at is the American Megatrend version, not the actual BIOS string. It's usually at the bottom of the screen.
The only available BIOS versions are 1.X or 5.X depending on the version of mobo you are using. You need to confirm that first.
Okay how about version 5.5 date is 07/10/02.
Quote
In which slot is the sound card?
Is there a modem involved somewhere?
Did you uninstall the previous card's driver properly? Enter SafeMode to find out.
Okay the sound card is in IRQ17 which it shares with an modem. (???)
Yes I made sure I uninstalled the old graphics card driver before I installed the new one.
Also:
Resource Share Device Description
IRQ 16 Shared Realtek RTL8139 Family PCI Fast Ethernet NIC #2
Resource Share Device Description
IRQ 16 Shared NVIDIA GeForce 6600
Could this be my problem???
Quote
What system are you running in your PC ? Did you enabled APIC Function in Advanced Bios Features ? You have said very few about your PC. so better explain with more detail your hardware ( Memory speed, system etc.)
System?? as in operating system? Win XP Pro. that is is my sig. will check on that APIC.
Extra info.
Field Value
Motherboard Properties
Motherboard ID 62-0710-009999-00101111-040201-VIA_K7$1AARK204_A6380VMS V5.5 071002
Motherboard Name MSI KT3 Ultra2 (MS-6380E)
Front Side Bus Properties
Bus Type DEC Alpha EV6
Bus Width 64-bit
Real Clock 133 MHz (DDR)
Effective Clock 267 MHz
Bandwidth 2133 MB/s
Memory Bus Properties
Bus Type DDR SDRAM
Bus Width 64-bit
Real Clock 167 MHz (DDR)
Effective Clock 333 MHz
Bandwidth 2666 MB/s
Chipset Bus Properties
Bus Type VIA V-Link
Bus Width 8-bit
Real Clock 67 MHz (QDR)
Effective Clock 267 MHz
Bandwidth 267 MB/s
Motherboard Physical Info
CPU Sockets/Slots 1
Expansion Slots 5 PCI, 1 AGP, 1 CNR
RAM Slots 3 DIMM
Integrated Devices Audio
Form Factor ATX
Motherboard Size 230 mm x 300 mm
Motherboard Chipset KT333
Extra Features Fuzzy Logic 4
Motherboard Manufacturer
Company Name Micro-Star International
Product Information http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_list.php
BIOS Download http://www.msi.com.tw/program/support/bios/bos/spt_bos_list.php
And memory:
DIMM1
Field Value
Memory Module Properties
Module Name Kingmax MPMB62D-68KX3-MBA
Serial Number None
Module Size 256 MB (2 rows, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Memory Speed PC2700 (166 MHz)
Module Width 64 bit
Module Voltage SSTL 2.5
Error Detection Method None
Refresh Rate Normal (15.625 us), Self-Refresh
Memory Timings
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
@ 133 MHz 2.0-3-3-6 (CL-RCD-RP-RAS)
Memory Module Features
Early RAS# Precharge Not Supported
Auto-Precharge Not Supported
Precharge All Not Supported
Write1/Read Burst Not Supported
Buffered Address/Control Inputs Not Supported
Registered Address/Control Inputs Not Supported
On-Card PLL (Clock) Not Supported
Buffered DQMB Inputs Not Supported
Registered DQMB Inputs Not Supported
Differential Clock Input Supported
Redundant Row Address Not Supported
Memory Module Manufacturer
Company Name Kingmax Inc.
Product Information http://www.kingmax.com/product/pro_newp.htm
DIMM 2
Field Value
Memory Module Properties
Serial Number None
Module Size 256 MB (1 rows, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Memory Speed PC2700 (166 MHz)
Module Width 64 bit
Module Voltage SSTL 2.5
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Memory Timings
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
@ 133 MHz 2.0-3-3-6 (CL-RCD-RP-RAS)
Memory Module Features
Early RAS# Precharge Not Supported
Auto-Precharge Not Supported
Precharge All Not Supported
Write1/Read Burst Not Supported
Buffered Address/Control Inputs Not Supported
Registered Address/Control Inputs Not Supported
On-Card PLL (Clock) Not Supported
Buffered DQMB Inputs Not Supported
Registered DQMB Inputs Not Supported
Differential Clock Input Supported
Redundant Row Address Not Supported
AND DIMM 3
( I realize there is a mismatch here but have had no dramas as yet because of it, will try re-installing the hardware wit h this module removed)
Field Value
Memory Module Properties
Module Name Nanya M2U51264DS8HC3G-5T
Serial Number 884B2815h
Manufacture Date Week 48 / 2005
Module Size 512 MB (2 rows, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Memory Speed PC3200 (200 MHz)
Module Width 64 bit
Module Voltage SSTL 2.5
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Memory Timings
@ 200 MHz 3.0-3-3-8 (CL-RCD-RP-RAS)
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
Memory Module Features
Early RAS# Precharge Not Supported
Auto-Precharge Not Supported
Precharge All Not Supported
Write1/Read Burst Not Supported
Buffered Address/Control Inputs Not Supported
Registered Address/Control Inputs Not Supported
On-Card PLL (Clock) Not Supported
Buffered DQMB Inputs Not Supported
Registered DQMB Inputs Not Supported
Differential Clock Input Supported
Redundant Row Address Not Supported
Memory Module Manufacturer
Company Name Nanya Technology Corp.
Product Information http://www.nanya.com/e-htm/abc/abc-03.htm
Thankyou for your help with this folks, really appreciate it and am having some fun learning. -
Hi,
I have been running an Athlon XP-M Barton Core at 2133mhz successfully for about 6+months and tonight it refuses to get past the screen that reads: Press Shift-Tab to try network boot, Try other boot devices......
After i clear the CMOS settings it will run but when i attempt a restart, it hangs up. Short of throwing out the board and using a Mercury KT600 as a replacement, this is my last hope.
MSI KT4A-V
FSB 133mhz
AMD Athlon XP-M 2800 2133mhz stable
1024 PC2700 DDR Ram
XFX 6800GT
Maxtor 200 DiamondMax 8Meg buffer
Cooler Master Aero CPU fan
Atrix 550 watt PSU
Any help please would be appreciatedIn very late reply to your help, it turned out to be a mainboard failure. Now I have the question of how to overclock the processor to 166 FSB. Here is my current config via Everest:
CPU Properties:
CPU Type Mobile AMD Athlon XP 3000+
CPU Alias Barton
CPU Stepping A2
CPUID CPU Name mobile AMD Athlon(tm) XP-M 2800+
CPUID Revision 000006A0h
CPU Speed:
CPU Clock 2159.56 MHz
CPU Multiplier 16.0x
CPU FSB 134.97 MHz
Memory Bus 168.72 MHz
CPU Cache:
L1 Code Cache 64 KB
L1 Data Cache 64 KB
L2 Cache 512 KB (On-Die, Full-Speed)
Motherboard Properties:
Motherboard ID 62-0909-009999-00101111-040201-VIA_K7$KT600300_A7021VMS V3.2 090904
Motherboard Name MSI KT6-V (MS-7021 v2.0) (5 PCI, 1 AGP, 2 DDR DIMM, Audio, LAN)
Chipset Properties:
Motherboard Chipset VIA VT8377 Apollo KT600
Memory Timings 2.5-3-3-7 (CL-RCD-RP-RAS)
Command Rate (CR) 2T
SPD Memory Modules:
DIMM1 1 GB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)
DIMM2 1 GB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)
BIOS Properties:
System BIOS Date 09/09/04
Video BIOS Date 04/29/06
DMI BIOS Version Version 07.00T
--------[ SPD ]---------------------------------------------------------------------------------------------------------
[ DIMM1: 1 GB PC3200 DDR SDRAM ]
Memory Module Properties:
Serial Number None
Module Size 1024 MB (1 rank, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Memory Speed PC3200 (200 MHz)
Module Width 64 bit
Module Voltage SSTL 2.5
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Memory Timings:
@ 200 MHz 3.0-3-3-8 (CL-RCD-RP-RAS)
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
@ 133 MHz 2.0-2-2-6 (CL-RCD-RP-RAS)
Memory Module Features:
Early RAS# Precharge Not Supported
Auto-Precharge Not Supported
Precharge All Not Supported
Write1/Read Burst Not Supported
Buffered Address/Control Inputs Not Supported
Registered Address/Control Inputs Not Supported
On-Card PLL (Clock) Not Supported
Buffered DQMB Inputs Not Supported
Registered DQMB Inputs Not Supported
Differential Clock Input Supported
Redundant Row Address Not Supported
[ DIMM2: 1 GB PC3200 DDR SDRAM ]
Memory Module Properties:
Serial Number None
Module Size 1024 MB (1 rank, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Memory Speed PC3200 (200 MHz)
Module Width 64 bit
Module Voltage SSTL 2.5
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Memory Timings:
@ 200 MHz 3.0-3-3-8 (CL-RCD-RP-RAS)
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
@ 133 MHz 2.0-2-2-6 (CL-RCD-RP-RAS)
Memory Module Features:
Early RAS# Precharge Not Supported
Auto-Precharge Not Supported
Precharge All Not Supported
Write1/Read Burst Not Supported
Buffered Address/Control Inputs Not Supported
Registered Address/Control Inputs Not Supported
On-Card PLL (Clock) Not Supported
Buffered DQMB Inputs Not Supported
Registered DQMB Inputs Not Supported
Differential Clock Input Supported
Redundant Row Address Not Supported
I try knocking down the multiplier to 12 and setting the FSB to 166 but the computer will not start and i have to clear CMOS to start over again. Any help at all would greatly be appreciated. -
Hi, I'm pretty new to optimizing computers. I have used Everest to get the following info on my systems performance. It's a long text, but I'm uncertain as to what is important here...so bear with me. Which values seem too low according to what should be expected(I'm not talking overclocking ... yet)? How can they be altered? A new BIOS version (running x64!)? Any suggestions are welcome. The system is stable.
Lavalys Everest Ultimate Edition used to retrieve:
Motherboard Properties
Motherboard Name MSI 975X Platinum (MS-7246)
Front Side Bus Properties
Bus Type Intel AGTL+
Bus Width 64-bit
Real Clock 267 MHz (QDR)
Effective Clock 1067 MHz
Bandwidth 8533 MB/s
Memory Bus Properties
Bus Type Dual DDR2 SDRAM
Bus Width 128-bit
DRAM:FSB Ratio 10:8
Real Clock 333 MHz (DDR)
Effective Clock 667 MHz
Bandwidth 10667 MB/s
Chipset Bus Properties
Bus Type Intel Direct Media Interface
Motherboard Physical Info
CPU Sockets/Slots 1 LGA775
Expansion Slots 2 PCI, 2 PCI-E x1, 2 PCI-E x16
RAM Slots 4 DDR2 DIMM
Integrated Devices Audio, Gigabit LAN, IEEE-1394
Form Factor ATX
Motherboard Size 240 mm x 300 mm
Motherboard Chipset i975X
Extra Features DigiCell, D.O.T. Express
Memory Module Properties
Module Name Micron Tech. 16HTF12864AY-80ED4
Manufacture Date Week 40 / 2006
Module Size 1024 MB (2 ranks, 4 banks)
Module Type Unbuffered DIMM
Memory Type DDR2 SDRAM
Memory Speed DDR2-800 (400 MHz)
Module Width 64 bit
Module Voltage SSTL 1.8
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Memory Timings
@ 400 MHz 5-5-5-18 (CL-RCD-RP-RAS)
@ 266 MHz 4-4-4-12 (CL-RCD-RP-RAS)
Memory Module Manufacturer
Company Name Micron Technology, Inc.
North Bridge Properties
North Bridge Intel Glenwood-DG i975X
Supported FSB Speeds FSB800, FSB1066
Supported Memory Types DDR2-533 SDRAM, DDR2-667 SDRAM
Revision C0
Package Type 1202 Pin FC-BGA
Package Size 3.4 cm x 3.4 cm
Core Voltage 1.5 V
In-Order Queue Depth 12
Memory Controller
Type Dual Channel (128-bit)
Active Mode Dual Channel (128-bit)
Memory Timings
CAS Latency (CL) 5T
RAS To CAS Delay (tRCD) 5T
RAS Precharge (tRP) 5T
RAS Active Time (tRAS) 15T
Row Refresh Cycle Time (tRFC) 35T
Refresh Period (tREF) 7.8 us
Error Correction
ECC Supported, Disabled
ChipKill ECC Not Supported
RAID Not Supported
ECC Scrubbing Not Supported
Memory Slots
DRAM Slot #1 1024 MB (DDR2-800 DDR2 SDRAM)
DRAM Slot #2 1024 MB (DDR2-800 DDR2 SDRAM)
PCI Express Controller
PCI-E x16 port #2 In Use @ x16 (nVIDIA GeForce 7900 GTX Video Adapter)
Chipset Manufacturer
Company Name Intel Corporation
BIOS Properties
BIOS Type Award
Award BIOS Type Phoenix - AwardBIOS v6.00PG
Award BIOS Message 975X Platinum W7246IMS V7.0 071206 11:38:16
System BIOS Date 07/12/06
Video BIOS Date 06/20/06
pharmaGauchoDoyle: Thx for all help
A lot of numbers here from CPUZ:
Processors Information
Processor 1 (ID = 0)
Number of cores 2
Number of threads 2 (max 2)
Name Intel Core 2 E6600
Codename Conroe
Specification Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
Package Socket 775 LGA (platform ID = 0h)
CPUID 6.F.6
Extended CPUID 6.F
Core Stepping B2
Technology 65 nm
Core Speed 2403.0 MHz (9.0 x 267.0 MHz)
Rated Bus speed 1068.0 MHz
Stock frequency 2400 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSE4, EM64T
L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 4096 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 9.0x
max VID 1.213V
Chipset
Northbridge Intel i975X rev. C0
Southbridge Intel 82801GB (ICH7) rev. 01
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 2048 MBytes
Memory Frequency 400.5 MHz (2:3)
CAS# 4.0
RAS# to CAS# 4
RAS# Precharge 4
Cycle Time (tRAS) 12
Bank Cycle Time (tRC) 20
DIMM #1
General
Memory type DDR2
Manufacturer (ID) Micron Technology (2CFFFFFFFFFFFFFF)
Size 1024 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number 16HTF12864AY-80ED4
Serial number D5067481
Manufacturing date Week 40/Year 06
Attributes
Number of banks 2
Data width 64 bits
Correction None
EPP no
Timings table
Frequency (MHz) 266 400
CAS# 4.0 5.0
RAS# to CAS# delay 4 5
RAS# Precharge 4 5
TRAS 12 18
TRC 16 23
I'm getting a kick outta this! -
Learning The Terminal commands in Mac OS X
Hello there,
Just to refresh memory thought I would post some quick links to some free/online guides, tutorials and courses.
Hope some of these will become useful to others.
1.UNIX Tips for Mac OS X
http://www.cs.cmu.edu/~benhdj/Mac/unix.html
2.Mac OS X notes
http://www.cs.ucr.edu/~jbyrne/macosx.htm
3. [FAQ] - UNIX basics for newbies
http://www.macosx.com/forums/showthread.php?s=&threadid=7133
4.An A-Z Index of the Apple OS X command line
http://www.ss64.com/osx/
5.Using the shell (Terminal) in Mac OS X
http://aplawrence.com/MacOSX/macosxshell.html
6.UNIX Tutorial for Beginners
http://www.ee.surrey.ac.uk/Teaching/Unix/
7.Basic Unix Commands
http://www.emba.uvm.edu/CF/basic.html
8.Commonly used Unix commands
http://infohost.nmt.edu/tcc/help/unix/unix_cmd.htmlHere's another.
Rosetta Stone for Unix
http://bhami.com/rosetta.html -
Wrong Verision of Workflow is called
My issues is that the correct versions of the Workflow is active and all event linkgage is active... When the workflow is called the wrong verision for the workflow is executed. I have refresh buffers, swu3 is green.. Can somebody give me some ideas how to correct this issue.
Thanks.
John
[email protected]Hello John,
Goto transaction SWETYPV and check correct version of workflow attached to even linkage. If it is still refering to old version then delete record and create new record with new version of workflow.
You can goto Event Linkage using Worklfow Menu Area SWLD as well.
If still it is not working refresh memory using TC : SWU_OBUF....logout and login again. Most of the time it has problem with memory refersh
This will solve your problem.
Cheers,
Nilesh
Message was edited by: Nilesh Kshirsagar -
K8N Neo Platinum (MS-7030) drives
the lastest drives from my K8N Neo Platinum (MS-7030) (socket 754) are 5.03 ?
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_list.php?part=1&kind=1&CHIP=1&COM=4
ThanksOuuchh!! Hown uninstall my old drives 5.03 ?
After installing 5.10 I will not have problems with my all drives (Ati 9600 xt /soundblaster live ) ?
My problem is the system is very very slow. and my old cpu (athlon 2.0 msi k4 ultra -512 mb) was faster than my new AMD Athlon64 Processor 3200+ Newcastle -Msi K8n Neo Platinum -512 mb)
I suppose the problem is my a memory
DIMM 1
Module Name SMT-OF-AMERICA
Module Size 256 MB (1 rows, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Memory Speed PC2700 (166 MHz)
Module Width 64 bit
Module Voltage SSTL 2.5
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Memory Timings
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
@ 133 MHz 2.0-3-3-6 (CL-RCD-RP-RAS)
DIMM 2
Memory Module Properties
Module Name SpecTek
Module Size 256 MB (1 rows, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Memory Speed PC2700 (166 MHz)
Module Width 64 bit
Module Voltage SSTL 2.5
Error Detection Method None
Refresh Rate Reduced (7.8 us)
Memory Timings
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
@ 100 MHz 2.0-2-2-5 (CL-RCD-RP-RAS)
Sorry for my English
Maybe you are looking for
-
All share options are greyed out
I downloaded a movie into Movie '08 from a USB memory stick. The movie is in MPEG 4 format and I had made the movie on another computer using the Studio program. I can play the movie on the computer, but all the share options are grayed out. I would
-
Can't install snow leopard on partition after upgrading to lion
I rushed out too early to install Lion via Apple Apps store. Now, I realize that Rosetta is gone and so are my options to use older apps. As I was reading on the web and Apple Support, I have tried various things and get a window saying that I can'
-
How to determine the source of Events triggered in a process chain
Hi , We have almost a 100 process chains, and of these approx 20-30 local process chains are triggered by events raised within other process chains. These events are raised via BP_EVENT_RAISE using the ABAP process type. However, our problem is to
-
Recently updated ITUNES, cannot open it now, Please help
I updated Itunes last night. Now it will not open when I click on it. I have uninstalled it and reinstalled with the same results. Any ideas?
-
Boot Camp Killed My Mini (or was it my own stupidity?)
After not reading the fine print and trying to install Windows Media Center through Boot Camp onto my Mac Mini, I had errors and it crashed out (as noted by other posters here). After unsuccesfully trying to recover, and as I'd just recently done a c