Refreshing the data of a table based block

Hi,
Is there some function like refresh_block that I can use to reload the data a table block?
Thanks,
--Bassem                                                                                                                                                                                                                                        

All you can do is to re-execute the query

Similar Messages

  • Not able to refresh the data in a table

    Hi In my application i fill data in a table on clikc of a button ..
    Following are the line of code i have user
    RichColumn richcol = (RichColumn)userTableData.getChildren().get(0);                                           (fetch the first column of my table)
    richcol.getChildren().add(reportedByLabel);                                                                   (reportedByLabel is a object of RichInputText)
    AdfFacesContext adfContext1 = AdfFacesContext.getCurrentInstance();
    adfContext1.addPartialTarget(richcol);
    adfContext1.addPartialTarget(userTableData);
    But on submit of that button table data is not refreshed after adding partial trigger on that table as well as that column also .... any idea??
    Edited by: Shubhangi m on Jan 27, 2011 3:50 AM

    Hi,
    The Code that you have shown adds an additional inputText component to the first column of a table.
    Is that your intention?
    If yes, please use the following code snippet to achieve your functionality:
    JSPX Code:
    <af:form id="f1">
    <af:commandButton text="Add Column" id="cb1"
    actionListener="#{EmployeesTableBean.onAddColumn}"/>
    <af:table value="#{bindings.Employees.collectionModel}" var="row"
    rows="#{bindings.Employees.rangeSize}"
    emptyText="#{bindings.Employees.viewable ? 'No data to display.' : 'Access Denied.'}"
    fetchSize="#{bindings.Employees.rangeSize}"
    rowBandingInterval="0"
    selectedRowKeys="#{bindings.Employees.collectionModel.selectedRow}"
    selectionListener="#{bindings.Employees.collectionModel.makeCurrent}"
    rowSelection="single" id="t1"
    binding="#{EmployeesTableBean.table}">
    <af:column sortProperty="EmployeeId" sortable="false"
    headerText="#{bindings.Employees.hints.EmployeeId.label}"
    id="c1">
    <af:outputText value="#{row.EmployeeId}" id="ot2">
    <af:convertNumber groupingUsed="false"
    pattern="#{bindings.Employees.hints.EmployeeId.format}"/>
    </af:outputText>
    </af:column>
    <af:column sortProperty="FirstName" sortable="false"
    headerText="#{bindings.Employees.hints.FirstName.label}"
    id="c2">
    <af:outputText value="#{row.FirstName}" id="ot1"/>
    </af:column>
    <af:column sortProperty="LastName" sortable="false"
    headerText="#{bindings.Employees.hints.LastName.label}"
    id="c3">
    <af:outputText value="#{row.LastName}" id="ot3"/>
    </af:column>
    </af:table>
    </af:form>
    Bean:
    public class EmployeesTableBean {
    private RichTable table;
    public EmployeesTableBean() {
    public void setTable(RichTable table) {
    this.table = table;
    public RichTable getTable() {
    return table;
    public void onAddColumn(ActionEvent actionEvent) {
    RichInputText newRichInputText = new RichInputText();
    newRichInputText.setId("new");
    newRichInputText.setValue("Name:");
    RichColumn richcol = (RichColumn)table.getChildren().get(0);
    richcol.getChildren().add(newRichInputText);
    AdfFacesContext adfContext1 = AdfFacesContext.getCurrentInstance();
    adfContext1.addPartialTarget(table);
    Thanks,
    Navaneeth

  • How to dynamically display the data from a table base on row selection of another table in ADF

    Hi ,
    I have a requirement in ADF. I need to change the data of a table  based on row selection of another Table . Both the table have a Parent Child relationship between them. They have a common attribute say department_id.
                                                                                         For this I created bind variable in view object of employees table and wrote a where clause in the sql query using that bind variable. Then I created method for selection listener of department Table in java bean.
    My method is following
        public void onrowselection(SelectionEvent selectionEvent) {
            RichTable richTable = (RichTable)selectionEvent.getSource();
                            CollectionModel tableModel = (CollectionModel)richTable.getValue();
                            JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding)tableModel.getWrappedData();
                            Object selectedRowData = richTable.getSelectedRowData();
                            JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding)selectedRowData;
                    oracle.jbo.domain.Number newVal = (oracle.jbo.domain.Number) nodeBinding.getAttribute("DepartmentId");
                    Number pallet = newVal.bigDecimalValue();
                    System.out.println("Selected values " + pallet);
            BindingContext bindingctx = BindingContext.getCurrent();
                          BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
                          DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
                  DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("EmployeesView1Iterator");//access the iterator by its ID value in the PageDef file
                          ViewObject vo =dciter.getViewObject();
                          vo.setNamedWhereClauseParam("DepartmentId", pallet);//enter your value
                          vo.executeQuery();
    It is printing the selected value of department id from department table in the log. But it is not able to pass the value to employees view. It is showing the following error in the log
    "Definition DepartmentId of type Variable is not found in EmployeesView1."
    I will be very thankful if someone helps me to solve this errror or is there any other way to achieve the same requirement.
    Thanks
    Nilesh

    Note quite sure why you simply wont create a viewlink for the viewobject the tables are based on..
    The viewlink attribute will be based on the departmentId and it's a simple master detail relationship which automatically uses ppr.
    However, if both tables are on the same page; using your hack about;
    On the underlying viewobject, define a viewcriteria e.g. "listById" and set your bind variable here.
    I would bind table two to a RichTable component:
    RichTable t2;
    public void onrowselection(SelectionEvent selectionEvent) {
            RichTable richTable = (RichTable)selectionEvent.getSource();
                            CollectionModel tableModel = (CollectionModel)richTable.getValue();
                            JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding)tableModel.getWrappedData();
                            Object selectedRowData = richTable.getSelectedRowData();
                            JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding)selectedRowData;
                    oracle.jbo.domain.Number newVal = (oracle.jbo.domain.Number) nodeBinding.getAttribute("DepartmentId");
                    Number pallet = newVal.bigDecimalValue();
                    System.out.println("Selected values " + pallet);
                   refreshTable2(pallet);
            BindingContext bindingctx = BindingContext.getCurrent();
                          BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
                          DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
                  DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("EmployeesView1Iterator");//access the iterator by its ID value in the PageDef file
                          ViewObject vo =dciter.getViewObject();
                          vo.setNamedWhereClauseParam("DepartmentId", pallet);//enter your value
                          vo.executeQuery();
    private void refreshTable2(Number pallet){
    RichTable x=getT2();
    CollectionModel cm=(CollectionModel)x.getValue();
    JUCtrlHierBinding jcb=(JUCtrlHierBinding)cm.getWrappedData();
    BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
    DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
    DCIteratorBinding dciter = bindingsImpl.findIteratorBinding(jcb.getName()+"Iterator");
    ViewObject vo =dciter.getViewObject();
    ViewCriteriaManager vcm=vo.getViewCriteriaManager();
    ViewCriteria vc=vcm.getViewCriteria("listById");
    vo.applyViewCriteria(vc);
    vo.setNamedWhereClauseParam("DepartmentId",pallet);
    vo.executeQuery();
    AdfFacesContext.getCurrentInstance().addPartialTarget(getT2());

  • How to update ADF VO object to refresh the data in ADF Pivot table

    I need to know how to update the View object so that the date in pivot table is refreshed/updated/filtered.
    here are the steps I performed to create ADF pivot table application using VO at design time.
    1) created a collection in a Data Control (ViewObject in an ApplicationModule) that provides the values I wanted to use for row and column labels as well the cell values (Used the SQL query)
    2) Dragged this collection to the page in which wanted to create the pivot table
    3) In the pivot table data binding editor specified the characteristics of the rows (which attribute(s) should be displayed in header), the columns (likewise) and the cells.
    Now, I have a requirement to update/filter the data in pivot table on click of check box and my question is how to I update the View object so that the date in pivot table is refreshed/updated/filtered.
    I have got this solution from one of the contact in which a WHERE clause on an underlying VO is updated based upon input from a Slider control. In essence, the value of the control is sent to a backing bean, and then the backing bean uses this input to call the "filterVO" method on the corresponding AppModule:
    but, I'm getting "operationBinding" object as NULL in following code. Please let me know what's wrong.
    here is the code
    Our slider component will look like
    <af:selectBooleanCheckbox label="Unit" value="#{PivotTableBean.dataValue}"
    autoSubmit="true" />
    The setDataValue() method in the backing bean will get a handle to AM and will execute the "filterVO" method in that, which takes the NumberRange as the input parameter.
    public void setDataValue(boolean value) {
    DataValue = value;
    BindingContainer bindings = getBindings();
    OperationBinding operationBinding = (OperationBinding)bindings.getOperationBinding("filterVO");
    Object result = operationBinding.execute();
    The filterVO method in the AMImpl.java will get the true or false and set the where Clause for the VO query to show values.
    public void filterVO(boolean value) {
    if (value != null) {
    ViewObjectImpl ibVO = getVO1();
    ibVO.setWhereClause("PRODUCT_TOTAL_REVENUE(+) where rownum < 10");
    ibVO.executeQuery();
    }

    Did you define a filterVO action in your pagedef.xml file?
    You might want to read on how to access service method from a JSF Web Application in the ADF Developer Guide for 10.1.3 chapter 8.5

  • Refreshing the Data Source View in Analysis Services

    I have added columns to the SQL Database table that is used as a dimension in an Analysis Services Cube.  The new columns will be used as additional Property Fields for the dimension.  When I attempted to refresh the Data Source view so that the additional columns are present, I am given the following error:
    System.Data
    Property not accessible because 'Parent Columns and Child Columns don't have type-matching columns'
    I have done nothing to the columns used for the parent of child and the error message provides nothing to gon on. Does anyone have any ideas on this?
    Gary

    Olga,
    Thanks for your response.  I will try and answer your questions
    1) I have not tried removing the columns yet.  I will try that this afternoon but have limited hope.  The two columns I added are simple text columns that will be used as attributes in the dimension.  I have made no change to the parent or child columns.
    2) The table I modified is the source table for a parent-child dimension.
    3) The reference to the "check list" does not take me to any kind of check list.
    4) The parent-child dimensions I am trying to modify have been in use for months and the parent and child columns do have the dame data types.
    5) I have also check the data types between the dimension table and the fact table.  they use the same data types (small int).
    6) I have not made a collection for the parent key, it is a single column. The remainder of your last paragraph is not clear to me. Can you give me an example.
    I am fairly inexperienced with Analysis Services, please talk slow and use small words  :-)
    Thanks again for your help!
    Gary

  • How to delete the data from partition table

    Hi all,
    Am very new to partition concepts in oracle..
    here my question is how to delete the data from partition table.
    is the below query will work ?
    delete from table1 partition (P_2008_1212)
    we have define range partition ...
    or help me how to delete the data from partition table.
    Thanks
    Sree

    874823 wrote:
    delete from table1 partition (P_2008_1212)This approach is wrong - as Andre pointed, this is not how partition tables should be used.
    Oracle supports different structures for data and indexes. A table can be a hash table or index organised table. It can have B+tree index. It can have bitmap indexes. It can be partitioned. Etc.
    How the table implements its structure is a physical design consideration.
    Application code should only deal with the logical data structure. How that data structure is physically implemented has no bearing on application. Does your application need to know what the indexes are and the names of the indexes,in order to use a table? Obviously not. So why then does your application need to know that the table is partitioned?
    When your application code starts referring directly to physical partitions, it needs to know HOW the table is partitioned. It needs to know WHAT partitions to use. It needs to know the names of the partitions. Etc.
    And why? All this means is increased complexity in application code as this code now needs to know and understand the physical data structure. This app code is now more complex, has more moving parts, will have more bugs, and will be more complex to maintain.
    Oracle can take an app SQL and it can determine (based on the predicates of the SQL), which partitions to use and not use for executing that SQL. All done totally transparently. The app does not need to know that the table is even partitioned.
    This is a crucial concept to understand and get right.

  • To Select the data from two table one is transp table and onther is cluster

    Hi All,
    I want to select the data from two tables
    Here i am giving with an example.
    Fileds: kunnr belnr from bseg.  table bseg
    fields: adrnr from kna1     table: kna1.
    Know i want to put these into one internal table based on kunnr and belnr.
    Thanks in advance.
    Ramesh

    Hi,
       U cant use joins on cluster table and BSEG is a cluster table so use FOR  ALL ENTRIES for taht
    refer this code
    *&      Form  sub_read_bsak
          text
    -->  p1        text
    <--  p2        text
    FORM sub_read_bsak.
    *--Select data from BSAK Table
      SELECT lifnr
             augdt
             augbl
             gjahr
             belnr
             xblnr
             blart
             dmbtr
             mwskz
             mwsts
             sgtxt
             FROM bsak
             INTO CORRESPONDING FIELDS OF TABLE it_bsak
             WHERE belnr IN s_belnr
             AND   augdt IN s_augdt.
      IF sy-subrc EQ 0.
    *--Sort table by accounting document and vendor number
        SORT it_bsak BY belnr lifnr.
      ENDIF.
    ENDFORM.                    " sub_read_bsak
    *&      Form  sub_read_bseg
          text
    -->  p1        text
    <--  p2        text
    FORM sub_read_bseg.
      IF NOT it_bsak[] IS INITIAL.
    *--Select data from BSEG table
        SELECT belnr
               gjahr
               shkzg
               kostl
               hkont
               ebeln
               ebelp
               FROM bseg
               INTO CORRESPONDING FIELDS OF TABLE it_bseg
               FOR ALL ENTRIES IN it_bsak
               WHERE belnr EQ it_bsak-belnr
               AND   gjahr EQ it_bsak-gjahr
               AND   shkzg EQ 'S'.
        IF sy-subrc EQ 0.
    *--Sort table by accounting document
          SORT it_bseg BY belnr.
        ENDIF.
      ENDIF.
    ENDFORM.                    " sub_read_bseg

  • How can i convert the data from mutiple-table to the other database(MSSQL)?

    Dears,
    How can i convert the data from mutiple-table to the other database such as MS-SQL?
    I have a third party system based on MS-SQL 2000.
    Now we want to make a integration between SAP R/3(Oracle) and SQL server.
    When my user releases the purchase order in R/3, the application we coded will convert the releated data to the temp database on the SQL server.
    But i don't know which tools will help me reach the purpose.  BAPI, LSMW, IDoc... ???
    Would anybody tell me which way is better and how to do?
    Thanks a lot!
    Kevin Wang

    Hello Kevin,
    The question to use which method depend on your detail requirements. If you use BAPI, you need to find which Bapi can provide the data you want. Bapi normally use as a function called by external system. So you need to develop an external program like VB/Java to call this Bapi and move it to SQL. LSMW is use when you want to upload data from an external system to SAP. So it does not serve your requirement. Idoc can be use to export data to an external system. Again like Bapi, you need to find what Idoc can provide the data you want. However, it does not any programming from the external system. If I were you, based on your requirements, I think writing an Abap program that read the data you want and download it to NT/SQL server will be faster and easier.

  • How to fetch data from CDHDR Table based on Order Number

    Hi,
    I need to fetch the data from CDHDR just based on the Order number .I found there is a field called 'OBJECTID' in table 'CDHDR'. But the  last part of OBJECTID contains order number.suppose my order number is 90506210 the objectid field contains '51030000090506210'.510 is login client,don't know what 30 is and last part is order number i.e 000090506210.i have to concatenate all and fetch data .i can do it for one order number but here order number is declared as select-options.how do i ?
    HERE IS THE CODE FOR ONE ORDER NUMBER.HOW CAN DO FOR RANGE OF ORDER NUMBERS.
    PARAMETER : S_OBJECT FOR  /BEV1/RBVBAK-AUFNR  OBLIGATORY.
    DATA : IT_CDHDR TYPE STANDARD TABLE OF CDHDR WITH HEADER LINE,
                 WA_CDHDR LIKE LINE OF IT_CDHDR,
                 S_OBJECT1 LIKE CDHDR-OBJECTID.
    CONCATENATE  sy-mandt  '30'  S_OBJECT INTO S_OBJECT1.
    SELECT * FROM CDHDR INTO TABLE IT_CDHDR WHERE OBJECTID = S_OBJECT1.

    P838355 wrote:>
    > Hi,
    >  I need to fetch the data from CDHDR just based on the Order number .I found there is a field called 'OBJECTID' in table 'CDHDR'. But the  last part of OBJECTID contains order number.suppose my order number is 90506210 the objectid field contains '51030000090506210'.510 is login client,don't know what 30 is and last part is order number i.e 000090506210.i have to concatenate all and fetch data .i can do it for one order number but here order number is declared as select-options.how do i ?
    >
    > HERE IS THE CODE FOR ONE ORDER NUMBER.HOW CAN DO FOR RANGE OF ORDER NUMBERS.
    >
    >
    > PARAMETER : S_OBJECT FOR  /BEV1/RBVBAK-AUFNR  OBLIGATORY.
    >
    > DATA : IT_CDHDR TYPE STANDARD TABLE OF CDHDR WITH HEADER LINE,
    >              WA_CDHDR LIKE LINE OF IT_CDHDR,
    >              S_OBJECT1 LIKE CDHDR-OBJECTID.
    >
    > CONCATENATE  sy-mandt  '30'  S_OBJECT INTO S_OBJECT1.
    >
    > SELECT * FROM CDHDR INTO TABLE IT_CDHDR WHERE OBJECTID = S_OBJECT1.
    You need to loop through the select option and concatenate with required data then select using 'in' instead of equal or select one by one.
    or
    select sales order numbers from VBAK for the selection into internal table then loop through the internal table and concatenate then select from CDHDR.
    for better performance use objectclass in where clause. the value for sales order for objectclass is VERKBELEG.
    in my system the object id is just an order number there is no other additions to it but in CDPOS the tabkey contains the order number with client and other information also.
    the 30 may be your item number... check it
    go ahead and change sales order and see what you can find in CDHDR
    Good luck
    Edited by: Sampath Kumar on Oct 21, 2009 9:02 AM

  • Problem in refreshing the data in OBIEE answers?

    Hi,
    My report doesn't show the latest data in the database. I tried restarting my BI server and Presentation server also. But it is still showing the old data only. But in Admin tool im able to view the latest data. What could be the reason for this? Wont the refresh button given at the bottom of the report refresh the data?
    Thanks,
    Karthick

    Hi,
    If you want to use the cache and you have a regular load of data into your source for OBIEE, then you just need to ensure that the cache is cleared after your load. There is an ODBC command which will clear it:
    Call SAPurgeAllCache();
    You can put this in a sql file and then call it from a .cmd file:
    nqcmd -d "AnalyticsWeb" -u Administrator -p <password> -s D:\OracleBI\server\Scripts\Common\purge_cache.sql -o D:\OracleBI\server\Scripts\Common\purge_cache.out
    When you run this .cmd file it will clear the cache, this could then be caled from another tool, i.e. an Informatica workflow. All above is based on using a windows machine to connect and run the command.
    If your data is changing all the time and you just don't want caching on then just turn it off in nqsconfig.ini, change:
    ENABLE     =     YES;
    To
    ENABLE     =     No;
    in the cache section.
    Regards,
    Matt

  • Need to refresh the data

    Hi
    I am using Oracle8i Enterprise Edition Release 8.1.7.4.0 - Production
    I need to refresh the data in test box with the production database.
    I dont have the dblink. Please advise me the fastest method to refresh the data in test server.
    Regards,
    Ravi

    What do you mean by "I dont have the dblink" ? That you do not have access to the database ? OR that you do not have access to documentation on how to refresh a database ?
    If you need to refresh a schema alone, you could use Export-Import. If you need to refresh the whole database, I would advice using Backup and Restore -- either using scripted backups or RMAN.
    Note : If the application has setup tables that store database name, node name, port number etc, you will need to update those tables in the refreshed database (else they will still point to the production database !).
    You can access the 8.1.7 documentation from http://tahiti.oracle.com

  • How to delete the data in a table using function

    hi all,
    i need to delete the data in a table using four parameters in a function,
    the parameters are passed through shell script.
    How to write the function
    Thanks

    >
    But the only thing is that such function cannot be used in SQL.
    >
    Perhaps you weren't including the use of autonomous transactions?
    CREATE OR REPLACE FUNCTION remove_emp (employee_id NUMBER) RETURN NUMBER AS
    PRAGMA AUTONOMOUS_TRANSACTION;
    tot_emps NUMBER;
    BEGIN
    SELECT COUNT(*) INTO TOT_EMPS FROM EMP3;
    DELETE FROM emp3
    WHERE empno = employee_id;
    COMMIT;
    tot_emps := tot_emps - 1;
    RETURN TOT_EMPS;
    END;
    SQL> SELECT REMOVE_EMP(7499) FROM DUAL;
    REMOVE_EMP(7499)
                  12
    SQL> SELECT REMOVE_EMP(7521) FROM DUAL;
    REMOVE_EMP(7521)
                  11
    SQL> SELECT REMOVE_EMP(7566) FROM DUAL;
    REMOVE_EMP(7566)
                  10
    SQL>

  • Not able to get the data in COSB Table

    Hi Colleagues,
    I have created a Project and assign the WBS number to a Sales order and also have done all the settings in Result Analysis.
    But still not able to get the data in COSB table.
    Could you please suggest me the steps and process, Might be i have missed something..
    Thanks in Advance
    Regards
    Nitin

    Hi Ken,
    I have below mentioned requirement
    COSB will show value by object number and need to pass the object number to PRPS table to find the corresponding WBS element and then pass the WBS element to VBAP table to find the corresponding SO line item.
    Please let me know as Functional prospect what I have to do to bring this values in COSB table.
    Regards
    Nitin

  • How to refresh the data in published HTML?

    Hi All,
    I have created a Process Engineering diagram, whcih represents flow of material from Equipment to another equipment.
    I have binded the diagram to data from the data base and saved/published as HTML to view it in browser. So far it is fine.
    But the next step is: What happens when the data changes in the data base? The generated HTML became just a static diagram which is of not much use. If i want to refresh the data, then I need to publish again !!
    Is there a way to make service calls from HTML and update the data dynamically in HTML display?
    Note: I am using VISIO 2013 Professional edition
    Venkat

    Hi,
    If we had saved/published Visiso drawing as HTML file, we could not refresh the data source to control the HTML data directly. We need to re-publish, I think you do not want to do it.
    Thus, I recommend you use JavaScript or coding to invoke and refresh the background database when you modified it.
    The following artile may also help you:
    http://www.mathworks.com/help/matlab/ref/refreshdata.html
    If you have any question related to Programming/Code, post in HTML forums for further assistance.
    Regards,
    George Zhao
    TechNet Community Support

  • Problem in refreshing the data in Xcelsius

    Hi,
    I have added a refresh button in my dashboard  to refresh the data from the BOE , but ones i click that button it ask for user authentication and ones i enter that and click ok nothing happens , the data is not getting refreshed.
    In second case i made my data connection as refresh on load  so as soon i launch my dashboard it ask for user authentication and after entering that details nothing happens and i am not able to see the data and even if i enter wrong details in the pop up window it does not gives any error message for wrong credentials.
    Earlier i was getting the error like #2032 , #2017 so i maintained the crossdomail.xml file in web server it was resolved.
    But i am not able to refresh the data nor i am getting any error message kindly suggest !!
    Regards,
    Mishra,Vibhav

    Dear Ingo,
    Thanks for replying.
    Step 1 : I have used a excel sheet using the live office connection and using the existing CR report from the BOE.
    Step 2 : Then i have published that excel sheet in BOE
    Step 3 : I have imported that spreadsheet in the Xcelsius and created a dashboard on top of that.
    Step 4 : I have added a refresh button on the dashboard which is used to refresh the live office connection and the session URL   that i have maintained is  http://XXXC043A:8080/dswsbobje/services/session . i am not using the refresh on load option.
    Step 4 : When i preview the dashboard with the preview button  available in the Xcelsius i can see the dashboard with the existing data but ones i click the Connection refresh button a user authentication window pop up which ask for the system name user id and pwd and Authentication type . I used the Enterprise authentication for that but ones i submit the credential nothing happens even if i enter the wrong information no error  message is prompted.
    Thanks in advance .
    Regards,
    Mishra,Vibhav

Maybe you are looking for

  • How to merge 2 pdf forms into one print file ?

    I have been using Adobe forms for a year or so.  Now I have the need to merge together 2 PDF print files into 1 within the same ABAP program before writing the file to my server.  To be more exect, I am talking the output coming from structure FPFORM

  • Make single option as read only in Radio group

    Hi How to make a option readonly with respect to condition in radio group in oracle apex 4.0. Example option1 option2 option3 option4 I want to make the option4 read only based on the condition.So Where the codition needs to be added. Regards Balaji

  • When I open a page from an email document it opens in Internet Explorer - how can I stop this?

    Hi, I use Firefox as my default browser but when I opened a link from an official emailed adobe document it opened in Internet Explorer - I want to force all browser links to open only in Firefox - I have checked the advanced options and Firefox is s

  • Drag and drop file into Outlook from AIR application

    I am hoping to see if this would be possible with the Adobe AIR API. We currently have a desktop AIR application that clients install in order to facilitate certain operations triggered via a web application (such as opening files directly from the w

  • Best buy PC app fails to install.

    The install goes until almost the end, then ClickOnce fails, then the app doesnt load.  I've done the /AppData/apps delete fix attempt.  I've checked the event logs and later found a detailed stack trace of the issue: PLATFORM VERSION INFO Windows :