Refrying a PDF file - doesn't print completly

Hello,
I have a PDF document of about 1797 pages, I want to do a refry (print as PDF). The pages are all being send to the PDF printer but in the end I only get 24 pages in the PDF document, so the document is not fully printed. Even If I do a print operation starting at page 40 for example sometimes it only prints 13 pages...
So my problem or situation: I want to completly refry the document.
I have checked security and everything is ALLOWED, also printing.
The reason why I want to refry is because there has been done a crop on the file on all the edges and I want to remove these "invisible" margins and experience learned that it's quite impossible to do this in Adobe...you need to do a refry. If you think otherwise please let me know..."Remove hidden information" doesn't help.
Thank you for your help,
Ruben

Steve,
thank you for your responds,
I have tried your recommendation and I was hoping I finaly found the solution for my problem but it didn't help unfortunatly.
To clarify: I need to have the invisible spaces deleted, out of the crop.
When I proceeded your action it didn't keep the desired format.
This is a screenshot of the original format, I want to have the space out of the black rectangle deleted and get the black rectangle as the new, original page format...as doing a refry...
After doing the fixup you suggested this is the result for the same page:
You can see that there has been deleted a lot of white...,the margins are deleted and I didn't keep the original viewing format.
Any suggestions?
Thank you for your help!
kind regards,
Ruben

Similar Messages

  • Orarrp can't print pdf file directly to printer

    oracle remote print utility (orarrp) can't print pdf file directly to printer.
    we expect orarrp utility can handle ".rrpa" file (i.e. pdf file generated on the application server) by directly print the file to the client's printer, i.e. invoke the acrobat reader on the client side, display the the printer selection dialogue, after confirmation print the pdf file, then the acrobat reader close automatically nicely.
    However we are disappointed as the acrobat reader startup and display the pdf file content but does not print and does not close.
    After testing the problem several times, there are some findings:-
    Finding (A):-
    (a) for the success of direct printing of pdf file, a physical path must be provided; we have tried 2 methods:
    1) using drag & drop to copy the pdf file directly to the browser
    2) open pdf file in the browser directly using browser menu-->File-->Open.
    (b) for the failure of direct printing, a virtual path is involved and we have also tried 2 methods:
    1) when web.show_document() is used
    2) enter the url to the URL bar of the browser,
    eg. http://appsvr.com:7777/report/test_printout/APPSVR1094707.rrpa (this is a virtual path/url)
    Finding (B):-
    (a)when the physical path is used, a temporary pdf file is generated in the same directory where the rrpa file exists in the application server,
    e.g. in application server: d:/printout/yyy.pdf is generated for d:/printout/xxx.rrpa when direct print occurs
    (b) however when the virtual path is used, there is no such temp "pdf" file generated and direct print failed.
    May be when virtual path is used, orarrp utility don't know where to generate the temp "pdf" so direct print doesn't occur.
    So, anyone has similar experience or further queries or has solutions, please join.
    Thanks for your attention.

    Hi,
    It is really late to give response this post. But still who ever refering to this post for the same issue this solution is useful for achieving same in background:
    Even same can be used in smartforms, for getting spool request in PDF format as well which will decrease the size of file when printing in SAP printer.
    ct_tline is PDF output:
    DATA: lv_pdfsource TYPE xstring.
    FIELD-SYMBOLS:<p> TYPE x. " <p> type any.
    LOOP AT ct_tline INTO cs_tline.
      ASSIGN cs_tline TO <p> CASTING TYPE x.
      CONCATENATE lv_pdfsource <p> INTO lv_pdfsource IN BYTE MODE.
    ENDLOOP.
    * ->Create spool request in PDF format
    CALL FUNCTION 'ADS_CREATE_PDF_SPOOLJOB'
      EXPORTING
        printer  = 'LOCL'            "Printer name supporting PDF device type
    *   DEST     =
        pages    = 1
        pdf_data = lv_pdfsource        "XSTRING internal table
    *   NAME     =
    *   SUFFIX1  =
    *   SUFFIX2  =
    *   COPIES   =
    *   PRIO     =
        IMMEDIATE_PRINT         = 'X'
    *   AUTO_DELETE             =
    *   TITLELINE               =
    *   RECEIVER =
    *   DIVISION =
    *   AUTHORITY               =
    *   LIFETIME = '0'
    * IMPORTING
    *   SPOOLID  =
    * EXCEPTIONS
    *   NO_DATA  = 1
    *   NOT_PDF  = 2
    *   WRONG_DEVTYPE           = 3
    *   OPERATION_FAILED        = 4
    *   CANNOT_WRITE_FILE       = 5
    *   DEVICE_MISSING          = 6
    *   NO_SUCH_DEVICE          = 7
    *   OTHERS   = 8
    IF sy-subrc <> 0.
    * Implement suitable error handling here
    ENDIF.

  • Safari 7.0.6, using Adobe Acrobat 11.0.10, aren't rendering pdf files in the Print Preview screen.  Additionally, only a single, blank page prints for a multi-page pdf document.  Any ideas?

    Safari 7.0.6, using Adobe Acrobat 11.0.10, isn't rendering pdf files in the Print Preview screen.  Additionally, only a single, blank page prints for a multi-page pdf document.  Any ideas?

    Figured it out.  It had nothing to do with the software levels of Safari or Adobe Acrobat.  Here's the fix:
    Open Finder/Applications
    Search "Internet Plug-Ins"
    Move any Adobe plug-ins to the trash
    Quit Safari
    Launch Safari
    Your pdf document should now render in Print Preview and print properly.

  • Saving a Text data to a PDF file without using print option

    Hi,
    I want to save a Text to a PDF file. I want to assign the path of the PDF file as a default one.
    If I use Print options, then it ask for the file path at the run time.
    Is there any method to save to a PDF file without using print option in Labview 8.2.
    Regards,
    Raja

    This question comes up a lot. Did you try searching? It depends on the PDF printer driver that you're using. See here, here, here, ...

  • 3D PDF files in portfolio prints to Adobe PDF printer without content

    3D PDF files in portfolio prints to Adobe PDF printer without content, but if printed from single 3D PDF file everything is fine. I need batch printing (this is the reason I use portfolio) of large amount of 3DPDF files because of the need to have proper preview of these files in browsers. Any ideas or workarounds how to have preview pdf's or jpg's of the single paged 3D PDF files, keeping relevant file names?

    I suspected as much.  I was hopeful it was something like a setting that needed to be changed or a reg hack that needed a bit changed from 0 to 1 to make the printing work as expected.  I only installed the local printer to see if the RDP session
    tunnel was in fact causing the print size to balloon so I will continue to instruct users to use that instead of the local redirected printer.  I am disappointed but not surprised.
    Edit:
    Additionally I have tested the functionality of setting the GPO settings for Easy Print to use the redirected printer's drivers instead of the ones used by easy print, by setting “Computer
    Configuration -> Administrative templates -Windows Components -> Remote Desktop Services > Remote Desktop Session Host -> Printer Redirection”.
    to “Disabled” but
    with no luck.  In fact the printer received the proper Adobe PDF driver, but the job went out into print spool hell and was lost to the ether.  I have concluded that this approach will not bear any fruit.

  • Why I cannot print pdf files on my printer after update to Adobe Reader 10.1.3??

    Recently I update to Adobe Reader 10.1.3 and now I cannot print pdf files on my printer (bizhub C5501), why? Is anyone out
    there know how to solve this issue?

    This may be helpful:
    http://helpx.adobe.com/acrobat/kb/troubleshoot-pdf-printing-acrobat-reader.html

  • All my pdf files can be printed in low quality on my Brother printer but can't print in high quality in the printer menu.

    My problem is that all my pdf files can be printed when I choose "low quality printing" in my Brother printer menu but cannot be printed in "high quality". When trying to print in high quality, the documents load in the printer tray and it says 1 document then disappears and 0 document printing is showing. I have some pdf files that I want to print in color in high quality and black and white but I'm unable to do so. It only prints in low quality for both color and black and white.

    Hello,
    1. Please make sure that your Reader is updated to 11.0.09. Go to Help -> Check for Updates.
    2. Also, please check if there is any new update available for your Printer Driver.
    Regards,
    Anoop

  • Send PDF file directly to printer

    Hi,
    I have a requirement. I need to send a PDF file to a printer directly for printing. Printer name will be fetched dynamically based on a parameter of report.
    Please let me know how can we do it.
    Regards,
    Guddan

    HI,
    Try this in your program. It may be useful to you.
    Declare this for printing options**
    DATA : ioptions LIKE itcpo .
    ioptions-tddest   = 'YOUR_PRINTER_NAME'.
    ioptions-tdimmed  = 'X'.
    ioptions-tdnoprev = 'X'.
    CALL FUNCTION 'OPEN_FORM'
        EXPORTING
          application                 = 'TX'
          form                           = 'formname'
          OPTIONS                    = ioptions
          dialog                         = ' X '
    when you run the program directly it goes to the printer.
    Thanks,
    S.Kalaivani.

  • Italic fonts are missing in Table in PDF files when we print it out

    We use Adobe reader10 to open one PDF files, fonts in Table are display correctly on screen, but italic fonts are missing in Table in PDF files when we print it out. Any ideas?
    The PDF display correctly when we use Adobe Reader 9 to open it or print it out.

    George_Guo wrote:
    Why it is OK for Adobe reader9, and not OK for Adobe reader10?
    You could try posting your question on this dedicated Acrobat Print forum: http://acrobatusers.com/forum/printing-prepress

  • Pdf file won't print from adobe footer pop up

    Pdf file won't print form adobe footer pop up

    Attached is screenshot.  The menubar footer that allow you to print from adobe.

  • Adobe reader 11.0.5 - cannot print pdf file to network printer

    I have a 64 bit HP Pavilion a6230n PC running Windows 7, fully updated. I have wireless connection to a home file/printer server. My printer, a Brother HL-5140, is connected via USB to the file/printer server. All my other Windows programs capable of printing can print on the network printer - all except adobe reader. Adobe Reader sees the printer and all printing processes appear to be sending the file to the printer, however, the printer never gets the document. I've tried printing as a document, in which case the document sits in the printer queue until I delete it. If I send it as an image, each queue entry is deleted after adobe thinks it has printed. Again, nothing ever prints on the printer, and again, no other program running on my computer has any problems printing to this printer.
    I would appreciate any help with this problem.
    Addendum - 4 Nov 13:
    I uninstalled adobe reader 11 and installed a much earlier version, and now I can print pdf files. Clearly the printing issue is with the current versions of adobe reader.

    This phenomenon can happen with PDF files that have errors in them.  Adobe Reader or Acrobat may be able to fix these errors, but if you close the application, it will ask to save the corrected file.  If you save it once, that should no longer occur when you open it again.
    This is just one explanation, but it doesn't explain why that happens with every PDF you have.
    Test: does it also happen with a PDF that is not supposed to contain any errors: http://helpx.adobe.com/pdf/adobe_reader_reference.pdf ?

  • Using Adobe 8.1.2 some PDF files won't print

    Since we've upgraded to the latest version of Reader, 8.1.2, some of the files won't print. For example, this morning I got two PDF files in the same email, they both opened in Reader, but only one of them prints--sending to a Canon ImageRunner 5570 printer/copier/fax machine. I'm not getting any error messages on my computer, it just doesn't print?
    If I save a copy of the unprintable PDF to my desktop, then open in Acrobat 6.0 Standard (older version I know), it prints fine to the same printer.
    Does anyone know what's going on here? Best, David.

    We've been having the same problems printing to a Canon ImageRunner 4570, 8.1.2 won't print but 6 will. We can print to our other HP printer fine from 8.1.2, so it seems to be specific to the Canon. Tried printing from a shallow folder structure, but that hasn't seemed to have helped. Anyone heard if this is unique to the Canon printers? Thanks - Mike

  • Can't print from PDF files to desktop printer (CS3)

    I installed CS3 about 8 months ago and recently have been having issues printing PDF files to a desktop printer from Acrobat and Reader. All other documents are able to print to this printer (including other CS3 software).
    I get an error that says:
    "Unable to start print job. Is printer available?"
    If I open the same PDF in illustrator or Photoshop it will print, but obviously this is not ideal for multiple page pdfs. The same error happens from PDFs created by me as well as others.
    My first thought was to reinstall Acrobat, but seems this isn't possible without reinstalling the whole suite...
    Any ideas?

    rooster56 wrote:
    I'm using network magic basic w/Linksys router.  My Dell printer shows up as being shared but I don't know how to access it from my laptop.  Even tried to hard wire the printer to the router but network magic doesn't find it in order to add the device.  Thanks for any help.
    Hi rooster56,
    See thi post: http://forums.linksysbycisco.com/linksys/board/message?board.id=Network_Magic&thread.id=18
    Also note, when you plugged the Printer into the Router, you need to install the entire Printer Software package into each operating system that you want to print from. It can't print unless the software for the printer is installed.
    thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
    Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

  • Every time I open a a pdf file attachemnt or any pdf file and press print it wants to save the file

    Every time I try to print a pdf file it goes to save  I can't print adobe pdf files

    I am trying it on Adobe Acrobat Reader 9.2.1. Tried to fix Hex code, and also tried 'edit-preference-trust manager'. I focusing on Adobe registries but still couldn't fix the problem.

  • Damaged .pdf file when exporting / printing

    Post Author: darrens
    CA Forum: Exporting
    Hi,
    I scoured Google, these forums, and Crystal support but haven't found a solution to my issue.
    I have a Crystal report (version XIR2) served from an Enterprise server.  I also have a ASP.NET C# application that calls and runs this report in a DHTML CrystalReportViewer.  The actual report runs just fine.
    Clicking the print button in the report viewer's top toolbar causes the viewer to attempt to export the report to a .pdf, from where you can actually print it.  This is where my problem lies!  When Adobe Reader opens and attempts to open the temporary .pdf file generated from the viewer, I get the message "Adobe Reader could not open 'filename.tmp' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)."  This also happens when trying to export the report directly into PDF format.  Everyone who would run this report, including me, is using Adobe Reader 8.1.
    Exporting to other file formats seems to work just fine.  Excel and Word have no problems.
    Also, interestingly enough, exporting to PDF and trying to print in Internet Explorer 7 works just fine!  These problems seem to only occur in IE6.  Unfortunately, it is not possible for us to use IE7 yet, so we are stuck with IE6.  Additionally, we are stuck using the DHTML viewer, so other viewers, like the ActiveX or Java viewers, are not options for me.
    I had found some articles in Business Object support saying this problem was related to WebSphere, and there were various solutions I found related to that.  However, WebSphere isn't used anywhere in our organization, so this problem must be stemming from elsewhere.
    Anyone have any ideas?  Thanks in advance for taking the time to read / reply to this thread.  If anyone needs more information, feel free to ask!
    Thanks,Darren

    Post Author: fyz
    CA Forum: Exporting
    Hi,
    I think your pdf file is probably damaged. There is a tool called Advanced PDF Repair. I have used it to repair many corrupt PDF files successfully. Its homepage is http://www.datanumen.com/apdfr/  Maybe you can have a try.
    Alan

Maybe you are looking for