Reg: Avoid DSM Terminator popup window in the Portal 7.0

Hello All,
Iam using EP 7.0 SP19. I used Lightweight desktop for the user and assigned default home role. I am getting a popup window in the right top corner with the message as below "Closing Session". I checked that using HTTP Watch, its loading the DSM Terminator Component. How to avoid the popup window ?
It will appear while I am clicking the role and also Logoff. Once whole page refresh means, popup will appeared.
Please help me for this.
Regards
Prakash T

Hi,
Did you search already ?
How to avoid DSM pop-up window in portal
Regards,
Koti Reddy

Similar Messages

Error when calling a popup window in the initial screen of an application

Hi,
    I am calling a popup window in the Initial screen to select the variant list.
I am getting an error reference to Null Object reference.
Here is the Error.
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception              CX_SY_REF_IS_INITIAL
Date and Time          15.06.2007 10:00:16
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_WDR_MESSAGE_AREA===========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "SUPPLY_VIEW_DATA" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
"CL_WDR_MESSAGE_AREA===========CP" or "CL_WDR_MESSAGE_AREA===========CM00Q"
"SUPPLY_VIEW_DATA"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"SUPPLY_VIEW_DATA" "(METHOD)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
To prevent the exception, note the following:
Looking for Ur valuable suggestions.
Cheers,
Sam

Hi Sam,
The correct code for creating a popup window will be:
data lo_window_manager type ref to if_wd_window_manager.
data lo_api_component type ref to if_wd_component.
data lo_window         type ref to if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window         = lo_window_manager->create_window(
                     window_name            = 'WINDOW_NAME'
*                    title                  =
*                    close_in_any_case      = abap_true
                     message_display_mode   = if_wd_window=>co_msg_display_mode_selected
*                    close_button           = abap_true
                     button_kind            = if_wd_window=>co_buttons_okcancel
                     message_type           = if_wd_window=>co_msg_type_none
                     default_button         = if_wd_window=>co_button_ok
lo_window->open( ).
Hope this helps.
Regards,
Ram

I am using a Seagate backup plus portable drive on my iMac 7 with OSX 10.9.2. At startup up I always get a popup window stating "The disk you inserted is not readable by this computer. I click ignore and everything seems OK. Is it?

I am using a Seagate backup plus portable drive as my time machine backup on my iMac 7 with OSX 10.9.2 Mavericks. At startup I always get popup window stating "The disk you inserted is not readable by this computer..? I click ignore and everything seems to be OK. Time machine seems to be backuping up to the seagate. I can open time machine and see the history of backups. Why does this message come up at startup of computer????

If you installed the Seagate software, remove it according to the manufacturer's instructions.

Hello, I have creative cloud installed on my Mac Book Pro - OS X 10.9. 5 When trying to download trial version, a popup window shows the message " you have been disconnected" Connect to continue. No way to access to the download programs after entering t

Hello, I have creative cloud installed on my Mac Book Pro - OS X 10.9. 5 When trying to download trial programs, a popup window shows the message " you have been disconnected" Connect to continue. The same message comes after repeated attempt to entering the login and password info. How can I solve this?

Hi Jeff,
Here is the screenshot of the window which comes after any attempt to download a trial version. It is in French, it means you have been disconnected, connect to continue.

Lasr week I downloaded the latest OS update for my iPhone 5S. Now, a popup window states the password is invalid for voicemail. I have never need a password or I don't need one or want one. Have searched is setup to find a way to turnoff. Help!

Last week I downloaded the latest OS update for my iPhone 5S. Now, a popup window states the password is invalid for voicemail. I have never needed a password or I don't need one or want one. Have searched is setup to find a way to turnoff the required password. Phone has been like this since the update to the OS.

ka4txy wrote:
Last week I downloaded the latest OS update for my iPhone 5S. Now, a popup window states the password is invalid for voicemail. I have never needed a password or I don't need one or want one. Have searched is setup to find a way to turnoff the required password. Phone has been like this since the update to the OS.
If you are getting a voicemail password prompt, that usually means you have a voicemail. In order to hear it you will need to enter the passcode, it only needs to be entered once.
To reset your passcode, call your service provider.

Size of the select value window in the portal for a query

Hi,
When I try to restrict the key figures structure in the portal (to select some key figures and hide others), the description of some key figures is truncated. It happens when the description of the key figure has been defined on several lines in the query designer.
Does anyone knows how to increase the size of the lines in the "select filter value" window in the portal?
Thanks,
Gabriel

Major Sparky
Just a supplemental observations
There are certain actions even in the project that remains open that will close the opened, sized, and positioned Project Window.
Also
1. If you go to dual monitor system, typically the program does not remember the dual monitor setup when the project is saved closed and reopened.
2. If you use the project without a dual monitor system and save close project with the Preview Window open, sized, and positioned, when you re-open the project, the Preview Window is gone and would need to be reopened, sized, and positioned again.
ATR

Modal popup window refresh the parent (calling) window/view

I have a modal popup window that is adding detail records. When this window is closed via the Hide method in my controller I would like to refresh the parent (calling) window/view.
What is the best way to do this?
Regards,
Diane

Here's my process.....
2-windows & 3 views
Window 1 - Selection View and Detail View
Window 2 - Add View (used as a modal popup window called by a button click on the detail view)
Selection View has all the options for obtaining a list of data for the detail view. The detail view has an Add button. Component controller has the hide method and access to the other components that do the update/query methods. On the detail view the user can click Add and a popup modal window shows. User enters data and clicks either the add or cancel button. The Detail view needs to refresh to show the additional data that has been added by the modal window. There are calcuated values in the detail view from a supply function. This function is not running and the values are not changed.
What should be put in the hide method that will cause the detail view to obtain new data and supply the calculated values? If I was using the Add view as part of the same window as the detail/selection views I'd just put in a navigation link between the detail and add views and fire the plug. I like the idea of the popup window so I'd like to get this to work.
I put the wdContext.initialize() in the hide method - which yes - caused the detail view to run - however the context lost all the key values so I received a data not found. I then tried to initialize those nodes that did not contain the key values but the detail view did not display new values.
Thanks for any ideas.....Diane
Edited by: Diane Fuller on Jan 8, 2009 6:48 AM

Get values in a popup window into the livecycle forms

Hi,
Is it possible to get the values in a popup window in a livecycle form or assign the values in a poup window into livecycle form?
Thanks

Hi,
There is a method in the Acrobat SDK called execDialog that can be called from within an XFA Form. You can pass values to and from a dialog using this method. It is a bit involved and therefore I strongly recommend AcroDialog, which is a plugin for Acrobat from Windjack Solutions (http://windjack.com/product/acrodialogs/).
You can use this graphical interface to create dialogs and hten copy the script into your XFA Form.
Hope that helps,
Niall

Move Popup Windows to the Foreground

Some sites (e.g. TV Guides) open popups relating to the page in the main window.
The first time, the popup comes up in the foreground. When I return to the main window and click another link (making the popup update its data) – the popup remains in the background.
Is there a way to force FF to always move it to the foreground?
Thank you.

hello, i've tried it with this setting, but i think the website is not set-up to put the focus on the already open popup again...
you might want to contact the people from ynet and ask them to fix the issue on their side - see https://developer.mozilla.org/en/DOM/window.open (faq How can I bring back the window if it is minimized or behind another window?)

Open a popup window in the maximaize mode

Hi All,
I want to open a pop-up window in maximize mode, so that it fitted to my application window
properly.
Is there any method for maximizing pop-up window available?
Regards,
Praveen

IWDWindow externalWin = wdComponentAPI.getWindowManager().createNonModalExternalWindow("http://www.google.co.in/", "External");
externalWin.setWindowPosition(WDWindowPos.CENTER);
externalWin.setWindowSize(1280,850);
externalWin.show();
the dimension given above opens the external window in the maximum size

Create a popup window in a portal

Hi all,
how to create a popup window when clicked on a role in portal, the iview contains the 4 regions or clients as radio buttons, when i click on radio button, the perticular iview or region should hold and trigger the perticular region or client RFC
i hope u people know this, tell me step by step in doing this
Thanks in advance
Thanks&Regards
charan
Edited by: charan12 on Feb 2, 2011 5:39 AM

Hi charan,
You can set the property "Launch in New window" of the particular iview which needs to be open on click of the radio button as" Display in seperate headerless portal window".
Regards,
Namrata Dixit

Pop-up windows from the portal showing address bar

Hi,
I am not sure where to post this thread, but here goes. My client has the CRM web UI which has been integrated into SAP Portal 7.3. I am not aware of how this is done as I am not familiar with CRM.
The issue being faced is that when a user tries to create a new opportunity etc, the pop-up window opens. But an address bar is seen in the pop-up. This was not appearing when they were on an earlier version of EP.
I am not sure where I should be looking to remove the address bar. Is this something related to the web UI and not the portal?
Thanks & Regards,
Vaishnavi

Hi,
Take a look at the following:
[http://forums.sdn.sap.com/thread.jspa?threadID=1800949]
[Using iView Parameters to Open Applications in Separate Window|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d2aeb9-5f92-2d10-d38d-ded09c94330d?QuickLink=index&overridelayout=true&48747879654994]
[http://forums.sdn.sap.com/thread.jspa?threadID=124909]
Regards,
Alex

Popup when closing the portal application by close browser button

We are using the portal with BSP's and in some cases we have more browser windows open. The user get confused and want to close all windows except for the main one. Put in many occasions he closes the main browser window to and then he has to logon to the postal again and go again to the page he want to be returned.
What we like is to have the functionality available that if the user closes the main-window he soul get a pop-up window if he really wants to close the application.
(you can not solve this problem by building an 'onunload' in the body-tag of the index.htm, this will lead to a pop-up any time the page changes)

Why dont you put the onUnload() function in the header of the portal?
Would that work?

URL Iview in portal window, substituting the Portal window

Hi there,
we are trying to open an ITS Transaction via the Portal (EP 6.0 SP2 Win32). The user though should not see the Portal at all. We want some sort of redirect from the reverse proxy, which also does the portal authentication (NTLM) into the ITS.
Regards,
Bodo

Hello Bodo,
you've marked your question as solved. Can you describe in detail what was the solution?
Regards
Gregor

How to avoid user creation popup window in Employee Master Data Creation in SAP B1 9.0

Hi Experts,
I have to create employee master data.When I am creating Employee Master Data it is asking crete new user,If I was not provied user code.
Is there any standerd setting to avoid this?
Please suggest
Thnaks and Regards
DEV

Hi Dev,
The Pop up you are getting is Standard Behavior in 9.0
System is asking whether you want to assign any User Code to this Employee or not.
If you want to add any User Code to this New Employee Master then Press "OK" else Press "NO" to Add New Employee Master Data.
Hope this helps
Regards::::
Atul CHakraborty

Reg: Avoid DSM Terminator popup window in the Portal 7.0

Similar Messages

Maybe you are looking for