Reg:Background jobs are failing with out logs

Hi Team,
When i ran sm65 transaction in production i got the output.
  Test: Database table consistency test
     ==>  Inconsistent step no. for following job(s):
         ACS_SAP_HR                      14525701
         ACS_SAP_HR                      14525702
         ACS_SAP_HR                      14525801
         AUTO_SESSION_MANAGER            22091204
         AUTO_SESSION_MANAGER            22091301
         AUTO_SESSION_MANAGER            22132501
         EU_PUT                          19060603
         EU_REORG                        18180604
         OPEN_ENROLLMENT_SEND_EMAIL      15145305
         OPEN_ENROLLMENT_SEND_EMAIL      18301801
         RPTIME00                        22000822
         RSUVM008                        14330102
         SEND_INET_EMAIL                 08082001
Can you please let me know how to proceed further.
Thanks & Regards,
Deve

check this might help you
http://mailman.mit.edu/pipermail/sap-wug/2005-July/018391.html
Note 581692 - Apparently inconsistent job data - incorrect stepcount
Note 1272015 - Jobs with empty job names or job count
Note 37104 - Error analysis: Background processing system
Edited by: Bhudev on May 22, 2009 6:22 AM

Similar Messages

  • Background Jobs are failing

    Hi Gurus,
    Below are the jobs which are being failed in our solution manager system since two weeks with error " Logon of user 'DDAWES' in cleint 100 failed.  Found that user got locked due to some auditing reasons and i had changed the background jobs  to run with another user however jobs are failing with same errror.
    Jobs List:
    SM:ACCELERATE DOC USAGE
    SM:CSA SESSION REFRESH
    SM:DYNAMIC TABU UPDATE
    SM:EXEC SERVICES
    SM:REFRESH ENTRYSCREEN
    SM:RNOTIFUPDATE01
    SM:SESSIONS RESET
    Unsure about this case why the jobs were failing though we have changed the user.
    Any sugegssions would be much appriciable
    Thanks & Regards,
    Vinod

    Both users are having same authorizations and both are dailog users only. It looks weird when i changed the user in job step for released jobs, it got changed and updated the job step with new use at that moment. However the jobs are faling and when i go through the job logs there I could see that OLd user name in job step.
    Changed the released  jobs many times to run with another user, however the jobs are failing with error " Logon of user DDAWES in client 100 failed when starting a step".
    Please note the jobs were running fine before the user locked out due to auditing. Also please let me know how do i check the E2E changes ? in SDM ? is ther any transaction code that i can check?
    Please suggest...
    Thanks & Regards,
    Vinod
    Edited by: vinod kumar on Jul 6, 2009 5:34 PM

  • GN_GENERATE_CHECK and SM_SERVICE_CONTENT_UPDATE background jobs are failing

    We recently upgraded our Solution Manager to 7 ehp1.  A couple of the background jobs are not able to complete.
    Both jobs have the following entry in the job logs
    Step 001 started (program RAGS_DSWP_SERV_CONTENT_UPDATE, variant , user ID SOLMAN_ADMIN
    No authorization
    I'm not sure where to look for the authorization issue.  Any advice would be appreciated.
    Thanks
    Laurie McGinley

    we are on SM 7.01 (EHP1)  - and we have the same problem:
    Jobs GN_GENERATE_CHECK and GN_WORKLIST_GENERATE
    both jobs end abnormal with joblog:
    Object requested is currently locked by user SOLMAN_BTC
    Job cancelled after system exception ERROR_MESSAGE
    but the job-start is not corresponding to the entries in table SMCONFIGJOBS
    both jobs are startet at 00:01:44 (both !!!) 
    in table SMCONFIGJOBS the entry are
    REPORTNAME         GN_GENERATE_CHECK
    REPVARIANT
    JOBNAME            GN_GENERATE_CHECK
    PRIORITY           50
    PERIOD TYPE        DAY
    PERIOD INTERVAL    1
    START TIME         00:15:00
    ISIMMEDIATE
    INACTIVE
    WORKLOAD           M
    COMM2SAP
    REPORTNAME         GN_WORKLIST_GENERATE
    REPVARIANT
    JOBNAME            GN_WORKLIST_GENERATE
    PRIORITY           50
    PERIOD TYPE        DAY
    PERIOD INTERVAL    1
    START TIME         00:01:00
    ISIMMEDIATE
    INACTIVE
    WORKLOAD           L
    COMM2SAP
    any suggestions why the jobstart is not corresponding to the starttime in table SMCONFIGJOBS
    what job is scheduling these 2 Jobs GN_GENERATE_CHECK and GN_WORKLIST_GENERATE
    which other job maybe responsible for the object lock???

  • All crawl jobs are failing with errors, Query server not responding.

    Hi All,
    I'm facing issue with search service , one of the Query server not responding and all the crawl jobs are throwing errors.
    Errors:
    "The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site )"
    "The object was not found. ( Error from SharePoint site: HttpStatusCode NotFound The request failed with HTTP status 404: Not Found. )"
    Please suggest some resolutions.
    Pavan

    Hi Pavan,
    1. First verify as given in this article - https://support.microsoft.com/en-us/kb/2323206?wa=wsignin1.0
    2. If not 1 resolves issue then try to disable the anonymous access on the default zone web application(in content source)
    3. Also check this article if above two steps does not resolve the issue - http://www.sharepointtechs.com/the-sharepoint-item-being-crawled-returned-an-error-when-requesting-data-from-the-web-service-error-from-sharepoint-site-value-does-not-fall-within-the-expected-range
    4. If none of the above works then install this CU update http://support.microsoft.com/kb/2596505 and
    then re-run you SP Configuration Wizard and restart your SharePoint Server. But before installing this CU on your SharePoint Server ensure your have the latest backup.
    4. If all above does not work then remove
    the anonymous access (if enabled) and restore the site collection to a new new site.
    Please remember to click 'Mark as Answer' if the reply answers your query or 'Upvote' if it helps you.

  • Background Jobs are failing in DEV server after SP upgrade

    Hi Everyone,
    Below jobs are being failed in dev server after SP upgrade with error variant does not exist.
    SWWERRE, SWWDHEX, SWWCOND,  SWWCLEAR,SWFSLSDLEX, NON SAP USER UPLOAD
    System Details:
    SAP Version: ECC 6.0
    Database: SQL 2005
    OS: Windows 2003, SR2, 64 - bit.
    Kernel Patch: 221
    SAP_BASIS:19
    SAP_ABA :19
    SAP_APPL : 16
    SAP_AP :17
    SAP_HR : 51
    SAP_BW : 21
    PI_BASIS 2006_1_700 : patch 009
    ST_PI: ST_PI 2005_1_700 : 006
    FINBASIS : 16
    LOSFE: 16
    Can any one have idea on above mentioned jobs.
    Thanks & Regards,
    Vinod

    > Below jobs are being failed in dev server after SP upgrade with error variant does not exist.
    > SWWERRE, SWWDHEX, SWWCOND,  SWWCLEAR,SWFSLSDLEX,
    Those are workflow related jobs.
    > NON SAP USER UPLOAD
    This is a job name and not the program name.
    Markus

  • Maintanence plan jobs are failing

    Dear All,
    We are facing problems with maintenance plan jobs in SQL server 2012. All jobs are failing with Following error
    Executed as user: Testdbserver\SQLadmuser. Microsoft (R) SQL Server Execute Package Utility  Version 11.0.3431.0 
    for 64-bit  Copyright (C) Microsoft Corporation. All rights reserved.    Started:  2:35:25 PM  
    Could not load package "\Maintenance Plans\Db_Backup" because of error 0x80070005.  
    Description: Access is denied.  Source:   Started:  2:35:25 PM  Finished: 2:35:26 PM  Elapsed:  0.094 seconds.  
    The package could not be loaded.  The step failed.
    Server details are: windows 2008 server with sql server 2012 ENT with core based licence. And SQL server , agent services are running with user 'SQLadmuser' (Nonadmin windows user). SQLadmuser is
    having sysadmin server roleand in windows its nonadmin userid.
    SQL Server maintenance jobs are running under sql server agent service account(by default) but jobs are failing. So After that i have created
    credentials with proxy account and i have run those jobs with proxy account, all jobs are executing well with proxy.
    or If iam changing SQL server, agent service accounts from SQLadmuser  to
    local system the maintenance jobs are working perfect.
    I have cross verified all permissions and assigned SQLadmuser previlizes to the folders,root folders and regisries but still jobs are failing .
    Note: I have observed that some of SQL server related groups are not displaying in local groups and iam unable to find tose groups. one below are reflecting.
    1. Is there any relation with this sql groups to run the jobs?
    2. Why this jobs are not working with sql server agent service account?
    3. Does this create problems to whole SQL server instance in future?
    4. Running jobs with proxy account will be having any impact on server?
    Could you please help me to trouble shoot the maintenance jobs, Also sharing screenshots for reference.
    Thanks in advance,
    Nagesh
    Nagesh

    Hi Nagesh,
    For many of the maintenance plans which require access to file system you might have to give access for the SQL Server Agent account directly to those folders. Otherwise your SQL Agent wont have access to the file system. This is why your maintenance plan
    jobs like backups are failing.
    Now the best way of dealing with this issue is what you have done. Using proxy accounts. By using proxy accounts you are not giving any additional privileges to your SQL Agent account. There is no issue for using proxy accounts for SSIS packages or Maintenance
    plans where you need access outside of SQL. Infact proxy accounts are introduced for this purpose, so that Agent account can impersonate the credentials in the proxy and run the job in its security context.
    The reason why the jobs are successfull when you change your SQL Agent account to local system is that Local System account has access to the local file system.
    http://technet.microsoft.com/en-us/library/ms189064(v=sql.105).aspx
    HTH
    Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

  • SM:SELFDIAGNOSIS background job getting failed in Solution manager

    Hi All,
    SM:SELFDIAGNOSIS background job getting failed in Solution manger server :
    Job Log:
    2-22-2012 16:44:02 Job started                                                                                00           516          S
    2-22-2012 16:44:02 Step 001 started (program RDSWP_SELF_DIAGNOSIS, variant &0000000000324, user ID BASISUSER)      00           550          S
    2-22-2012 16:45:07 Internal session terminated with a runtime error (see ST22)                                     00           671          A
    2-22-2012 16:45:07 Job cancelled                                                                                00           518          A
    ST22: Dump:
    Runtime Errors         ITAB_DUPLICATE_KEY
    Date and Time          02-22-2012 16:45:07
    Short text
    A row with the same key already exists.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_DSWP_SD_DIAGNOSE_CONSISTENTCP" had to be
    terminated because it has
    come across a statement that unfortunately cannot be executed.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    An entry was to be entered into the table
    "\CLASS=CL_DSWP_SD_DIAGNOSE_CONSISTENT\METHOD=CHECK_USERS_BP\DATA=LT_USCP"
    (which should have
    had a unique table key (UNIQUE KEY)).
    However, there already existed a line with an identical key.
    The insert-operation could have ocurred as a result of an INSERT- or
    MOVE command, or in conjunction with a SELECT ... INTO.
    The statement "INSERT INITIAL LINE ..." cannot be used to insert several
    initial lines into a table with a unique key.
    How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "ITAB_DUPLICATE_KEY" " "
    "CL_DSWP_SD_DIAGNOSE_CONSISTENTCP" or "CL_DSWP_SD_DIAGNOSE_CONSISTENTCM00M"
    "CHECK_USERS_BP"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    KIndly Suggest to resolve the above issue
    Thanks
    Nekkalapu

    HI,
    Deatils:
    SAP EHP 1 for SAP Solution Manager 7.0
    SAP_ABA                701          0006    SAPKA70106
    SAP_BASIS              701          0006    SAPKB70106
    PI_BASIS               701          0006    SAPK-70106INPIBASI
    ST-PI                  2008_1_700   0002    SAPKITLRD2
    CRMUIF                 500          0004    SAPK-50004INCRMUIF
    SAP_BW                 701          0006    SAPKW70106
    SAP_AP                 700          0019    SAPKNA7019
    BBPCRM                 500          0016    SAPKU50016
    BI_CONT                704          0007    SAPK-70407INBICONT
    CPRXRPM                400          0016    SAPK-40016INCPRXRP
    ST                     400          0024    SAPKITL434
    ST-A/PI                01M_CRM570   0000         -
    ST-ICO                 150_700      0009    SAPK-15079INSTPL
    ST-SER                 701_2010_1   0002    SAPKITLOS2
    Thanks
    Nekkalapu

  • Reporting (Project Publish) job is failing with 'The given key was not present in the dictionary'

    I am using Project Server 2010 with SQL Server 2008 R2.
    I have a PWA Instance which was running fine. I have a big number of projects and I do not keep site for all the projects as we do not need project site in our business.
    Everything was running fine but during last few days, some of the jobs like Reporting (Project Publish) and Reporting (Project Delete) job is failing with the same error details for all the projects. I am not able to trace where the data is wrong/corrupt
    and how to resolve it.
    The error detail and ULS Log is given below anod I would appreciate if someone can guide me where the problem is and suggest me any solution.
    QUEUE ERROR DETAIL:
    General Reporting message processor failed:
     ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='4f36afe0-43dc-4143-befc-0452da416e69' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
    PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
     ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='071aeb7b-540e-45fa-b40b-a94a5d2e8e04' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
    PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
     ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='55445e77-51e3-40d8-a62f-e6db0b897444' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
    PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
     ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='3ab5a1ba-0915-45bb-a078-4b4b7c38af51' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
    PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
     ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='b27acd8f-6cde-47d4-bd53-5930e84dc940' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
    PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
     ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='b7250544-2a11-4887-8dcd-378b34b33ae1' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
    PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
     Queue:
     GeneralQueueJobFailed (26000) - ReportingProjectPublish.ReportProjectPublishMessageEx. Details: id='26000' name='GeneralQueueJobFailed' uid='0706d212-f737-43ea-b694-c420488d57bb' JobUID='ca238fcf-d91b-46d6-a9c2-15f2cc35230d' ComputerName='WebSrv1' GroupType='ReportingProjectPublish'
    MessageType='ReportProjectPublishMessageEx' MessageId='1' Stage=''. For more details, check the ULS logs on machine WebSrv1 for entries with JobUID ca238fcf-d91b-46d6-a9c2-15f2cc35230d.
    ULS LOG:
    Timestamp               Process                                
     TID    Area                           Category                     
     EventID Level      Message  Correlation
    01/19/2015 19:05:07.44 Microsoft.Office.Project.Server (0x1D30) 0x23FC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=117.485513497555 ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:07.66 Microsoft.Office.Project.Server (0x1D30) 0x2C94 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=192.534598230475 ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:08.16 Microsoft.Office.Project.Server (0x1D30) 0x1CFC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=448.362263674397 ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:08.36 Microsoft.Office.Project.Server (0x1D30) 0x17E0 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=162.22152253546 ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:09.00 Microsoft.Office.Project.Server (0x1D30) 0x0898 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=557.699412860413 ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:09.36 Microsoft.Office.Project.Server (0x1D30) 0x1F20 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=253.695754010613 ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:09.67 Microsoft.Office.Project.Server (0x1D30) 0x0D68 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=239.76302803952 ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:10.64 Microsoft.Office.Project.Server (0x1D30) 0x3324 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=973.469925841736 ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:11.92 Microsoft.Office.Project.Server (0x1D30) 0x2DB8 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=1275.5063556303 ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:12.96 Microsoft.Office.Project.Server (0x1D30) 0x0A1C SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=1041.55499409959 ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:13.15 Microsoft.Office.Project.Server (0x1D30) 0x0518 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=133.891034879385 ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:13.35 Microsoft.Office.Project.Server (0x1D30) 0x14EC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=207.250205426327 ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:14.69 Microsoft.Office.Project.Server (0x1D30) 0x10B4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_PUBLISH_PROJECT). Execution Time=267.137845971639 ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:14.93 Microsoft.Office.Project.Server (0x1D30) 0x14E0 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_PUBLISH_PROJECT). Execution Time=209.552772167485 ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:16.10 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResultWithOutputParameters -- MSP_SRA_ValidateServerLevelSRA).
    Execution Time=717.808222684698 ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:16.67 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (FillTypedDataSet -- MSP_SRA_GetData). Execution Time=307.24482978413 ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:17.58 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResultWithOutputParameters -- MSP_SRA_ValidateServerLevelSRA).
    Execution Time=123.306566048297 ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:19.12 Microsoft.Office.Project.Server (0x1D30) 0x25F4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResult -- MSP_WEB_SP_QRY_CreateSavedTasksForProject). Execution
    Time=111.699445284922 ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:19.61 Microsoft.Office.Project.Server (0x1D30) 0x2AC8 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResult -- MSP_WEB_SP_QRY_Statusing_BuildTaskHierarchy). Execution
    Time=449.279962592357 ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:19.79 Microsoft.Office.Project.Server (0x1D30) 0x26D0 Project Server Server-side Project Operations 8tci Monitorableser1 PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1,
    PSI: [QUEUE] System.IO.FileNotFoundException: The site
    http://epm.company.com/sites/Workspaces2/PROJECT_1 could not be found in the Web application SPWebApplication Name=SharePoint - 80.     at Microsoft.SharePoint.SPSite..ctor(SPFarm farm, Uri requestUri, Boolean contextSite, SPUserToken
    userToken)     at Microsoft.SharePoint.SPSite..ctor(String requestUrl)     at Microsoft.Office.Project.Server.BusinessLayer.Project.OpenProjectWeb(Guid projectUid)     at Microsoft.Office.Project.Server.BusinessLayer.Project.SetPwsProperties(Guid
    projectUid)     at Microsoft.Office.Project.Server.BusinessLayer.Queue.ProcessPublishMessage.ProcessMiscellaneousPublishMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:19.79 Microsoft.Office.Project.Server (0x1D30) 0x26D0 Project Server Server-side Project Operations 8tcj Monitorable PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1,
    PSI: [QUEUE] MiscellaneousPublishMessage failed on project b95c52ba-bc00-4301-aab5-890d0b057c29 ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:27.42 Microsoft.Office.Project.Server (0x1D30) 0x3088 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes:  Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
    PublishType='ProjectPublish'  The given key was not present in the dictionary.  . Standard Information: PSI Entry Point:   Project User: Domain1\User1  Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d  PWA Site URL:
    http://epm.company.com/PWA  SSP Name: SharedServices1_PsiServiceApplication  PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:27.42 Microsoft.Office.Project.Server (0x1D30) 0x3088 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
    Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()    
    at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
    dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
    messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)    
    at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:28.47 Microsoft.Office.Project.Server (0x1D30) 0x31F8 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes:  Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
    PublishType='ProjectPublish'  The given key was not present in the dictionary.  . Standard Information: PSI Entry Point:   Project User: Domain1\User1  Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d  PWA Site URL:
    http://epm.company.com/PWA  SSP Name: SharedServices1_PsiServiceApplication  PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:28.47 Microsoft.Office.Project.Server (0x1D30) 0x31F8 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
    Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()    
    at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
    dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
    messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)    
    at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:29.51 Microsoft.Office.Project.Server (0x1D30) 0x2B00 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes:  Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
    PublishType='ProjectPublish'  The given key was not present in the dictionary.  . Standard Information: PSI Entry Point:   Project User: Domain1\User1  Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d  PWA Site URL:
    http://epm.company.com/PWA  SSP Name: SharedServices1_PsiServiceApplication  PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:29.51 Microsoft.Office.Project.Server (0x1D30) 0x2B00 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
    Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()    
    at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
    dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
    messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)    
    at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:30.56 Microsoft.Office.Project.Server (0x1D30) 0x1D20 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes:  Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
    PublishType='ProjectPublish'  The given key was not present in the dictionary.  . Standard Information: PSI Entry Point:   Project User: Domain1\User1  Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d  PWA Site URL:
    http://epm.company.com/PWA  SSP Name: SharedServices1_PsiServiceApplication  PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:30.56 Microsoft.Office.Project.Server (0x1D30) 0x1D20 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
    Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()    
    at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
    dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
    messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)    
    at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:31.60 Microsoft.Office.Project.Server (0x1D30) 0x2170 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes:  Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
    PublishType='ProjectPublish'  The given key was not present in the dictionary.  . Standard Information: PSI Entry Point:   Project User: Domain1\User1  Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d  PWA Site URL:
    http://epm.company.com/PWA  SSP Name: SharedServices1_PsiServiceApplication  PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:31.60 Microsoft.Office.Project.Server (0x1D30) 0x2170 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
    Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()    
    at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
    dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
    messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)    
    at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:32.66 Microsoft.Office.Project.Server (0x1D30) 0x24DC Project Server Reporting atwj Critical Standard Information:PSI Entry Point:   Project User: Domain1\User1  Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d 
    PWA Site URL: http://epm.company.com/PWA  SSP Name: SharedServices1_PsiServiceApplication  PSError: ReportingProjectChangeMessageFailed (24006) RDS: The request to synchronize change(s) to project Project
    UID='b95c52ba-bc00-4301-aab5-890d0b057c29'. PublishType='ProjectPublish' failed.  Message: 'ReportingProjectChangeMessageFailed'. Message Body: The given key was not present in the dictionary. Error:(null) ae078058-f794-47ca-b1ad-0834f7a07f4d
    01/19/2015 19:05:32.66 Microsoft.Office.Project.Server (0x1D30) 0x24DC Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
    Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()    
    at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
    dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
    messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)    
    at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d

    Without seeing the history, one possibility might be some corruption in the reporting database. Assuming that you are following best practices for SQL DB management, and this is not a DB neglect problem, then I would try to force a refresh to see if that
    helps. You can do this by executing a custom field backup and then restore. Note: Do not do this during production hours. Let us know if that provides any therapy.
    Gary Chefetz, MCITP, MCP, MVP msProjectExperts
    Project and Project ServerFAQs
    Project Server Help BLOG

  • Background job getting failed every day

    Hi,
    This background job getting failed every day.But this job was running fine initial periord.Please help me out this issue.
    SAP_REORG_UPDATERECORDS
    SAP_WP_CACHE_RELOAD_FULL
    SLCA_LCK_SYNCHOWNERS
    Regards
    Naanas.

    If this is R/3, then none of the above jobs should exist in the system, if scheduled by default with other standard jobs, then these should be removed
    Note 1034532 - Changes for standard jobs
    Note 931436 - SLCA_LCK_SYNCHOWNERS standard job terminates

  • Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

    Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
    im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
    is there a way to put the IMacs into display mode with out logging into my Mac mini first
    or is there a portable monitor that I can use that will not require me to login first

    This
    Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
    says:
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
    How do I exit TDM?
    To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
    Can I use a third-party keyboard or older Apple keyboard to enable TDM?
    Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

  • Jobs are failing due to DBIF_RSQL_SQL_ERROR (SQL30081N)

    HI SAP,
    Job is failing with the below short dumps:
    1. Runtime Errors DBIF_RSQL_SQL_ERROR
    Exception CX_SY_OPEN_SQL_DB
    Date and Time 04.10.2010 06:31:26
    Database error text........: "SQL30081N A communication error has been                       
          detected. Communication protocol being used: "TCP/IP". Communication API being              
          used: "SOCKETS". Location where the error was detected: "10.62.92.4".                       
          Communication function detecting the error: "recv". Protoco"                                
         Internal call code.........: "[RSQL/OPEN/KONP ]"  
    2. Runtime Errors         DBIF_REPO_SQL_ERROR
    Date and Time          06.10.2010 19:24:12
    Database error text........: "CLI0108E Communication link failure.
      SQLSTATE=40003"
    Triggering SQL statement...: "CX_SY_OPEN_SQL_DB=============CP "
    Internal call code.........: "[REPO/*/43/LOAD/CX_SY_OPEN_SQL_DB=============C  ]"
    Work process traice file has the below error which came today:
    C  *** ERROR in DB6Open[dbdb6.c, 3308] CON = 0 (BEGIN)
    C  &+     DbSlBegReadDB6( SQLExecute ): [IBM][CLI Driver] SQL30081N  A communication error has been detected.  Communication
    C  &+      protocol being used: "TCP/IP".  Communication API being used: "SOCKETS".  Location where the error was detected:
    C  &+     "10.62.92.4".  Communication function detecting the error: "recv".  Protocol specific error code(s): "", "", "0"
    C  *** ERROR in DB6Open[dbdb6.c, 3308] (END)
    B  ***LOG BYM=> severe DB error -30081    ; work process in reconnect status [dbsh#3 @ 1127] [dbsh    1127 ]
    B  ***LOG BY4=> sql error -30081 performing SEL on table KONP       [dbtran#14 @ 7588] [dbtran  7588 ]
    B  ***LOG BY0=> SQL30081N  A communication error has been detected.  Communication protocol being used: "TCP/IP".  Communication API
    B  dbtran ERROR LOG (hdl_dbsl_error): DbSl 'SEL'
    B   RSLT: {dbsl=99, tran=1}
    B   FHDR: {tab='KONP', fcode=53, mode=2, bpb=0, dbcnt=0, crsr=1,
    B          hold=0, keep=1, xfer=0, pkg=0, upto=0, init:b=0,
    B          init:p=(nil), init:#=148, wa:p=0x7000000501bc3e8, wa:#=148}
    C  *** ERROR in getAndBindSQLDA[dbdb6.c, 14585] CON = 0 (BEGIN)
    C  &+     DbSlReadDB6( SQLExtendedBind ): [IBM][CLI Driver] CLI0108E  Communication link failure. SQLSTATE=40003
    C  &+
    C  &+     SELECT "UNAM", "UDAT", "UTIME", "L_DATALG", "Q_DATALG", "SDAT", "STIME", "MINOR_VERS", "MAJOR_VERS" FROM "REPOLOAD
    C  &+     " WHERE "PROGNAME" = ? AND "R3STATE" = ? AND "MACH" = ?   WITH UR
    C  &+       cursor type=NO_HOLD, isolation=UR, cc_release=YES, optlevel=5, degree=1, buffer_lobs=YES, op_type=18, reopt=0
    C  &+       ABAP location info: 'RSBTCRTE', 807
    C  &+
    C  &+     ABAP location info 'ZBW_FILL_KONPA004', 273
    C  &+
    C  *** ERROR in getAndBindSQLDA[dbdb6.c, 14585] (END)
    B  ***LOG BYM=> severe DB error -99999    ; work process in reconnect status [dbsh#3 @ 1127] [dbsh    1127 ]
    B  ***LOG BY4=> sql error -99999 performing SEL on table REPOLOAD   [dbrepo#5 @ 2657] [dbrepo  2657 ]
    B  ***LOG BY0=> CLI0108E  Communication link failure. SQLSTATE=40003 [dbrepo#5 @ 2657] [dbrepo  2657 ]
    B  ***LOG BY0=> CLI0108E  Communication link failure. SQLSTATE=40003 [dbrepo#5 @ 2657] [dbrepo  2657 ]
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_SAVE_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_SAVE_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    C  *** ERROR in DB6EndTransaction[dbdb6.c, 6768] CON = 0 (BEGIN)
    C  &+     DbSlRollbackDB6( SQLEndTran ): [IBM][CLI Driver] CLI0106E  Connection is closed. SQLSTATE=08003
    C  &+
    C  &+     ROLLBACK[FORCED][DONT_KEEP_WITH_HOLD]
    C  &+
    C  &+     ABAP location info 'ZBW_FILL_KONPA004', 273
    C  &+
    C  *** ERROR in DB6EndTransaction[dbdb6.c, 6768] (END)
    B  ***LOG BYM=> severe DB error -99999    ; work process in reconnect status [dbsh#3 @ 1127] [dbsh    1127 ]
    Kindly suggest what can be done to resove this, as this is coming for specificly two jobs.
    Regards,
    Munish

    My first guess would be that there is a network issue between application server and database. If you're running that job on the database server I'd also check db2diag for possible errors.
    Markus

  • Jobs are failing and give dump "TSV_TNEW_BLOCKS_NO_ROLL_MEMORY"

    Hi ,
    Jobs are failing and giving dump "TSV_TNEW_BLOCKS_NO_ROLL_MEMORY " and TSV_TNEW_PAGE_ALLOC_FAILED.
    Here are the logs:
    ===================================================================
    15.04.2009 07:11:35 Job started                                                                                00           516          S
    15.04.2009 07:11:35 Step 001 started (program ZAPO_REALIGNMENT_MPOS_PA, variant AP_AP_REALG_S1, user ID aaa_bbb_apo)      00           550          S
    15.04.2009 07:12:52 ABAP/4 processor: TSV_TNEW_BLOCKS_NO_ROLL_MEMORY                                                      00           671          A
    15.04.2009 07:12:52 Job cancelled                                                                                00           518          A
    ===================================================================
    Job log overview for job:    BIREQU_4DHSSKZ38YF3KALR4ZBRCDNQT / 00382400
    Date       Time     Message text                                                                     Message class Message no. Message type
    15.04.2009 00:38:24 Job started                                                                           00           516          S
    15.04.2009 00:38:24 Step 001 started (program SBIE0001, variant &0000000024435, user ID aaa_bbb_APO)      00           550          S
    15.04.2009 00:38:24 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)              R3           413          S
    15.04.2009 00:38:24 DATASOURCE = 9AZAP_AM                                                                 R3           299          S
    15.04.2009 00:38:24 *************************************************************************             R8           048          S
    15.04.2009 00:38:24 *          Current Values for Selected Profile Parameters               *             R8           049          S
    15.04.2009 00:38:24 *************************************************************************             R8           048          S
    15.04.2009 00:38:24 * abap/heap_area_nondia......... 2000683008                              *            R8           050          S
    15.04.2009 00:38:24 * abap/heap_area_total.......... 2000683008                              *            R8           050          S
    15.04.2009 00:38:24 * abap/heaplimit................ 100894464                               *            R8           050          S
    15.04.2009 00:38:24 * zcsa/installed_languages...... ED                                      *            R8           050          S
    15.04.2009 00:38:24 * zcsa/system_language.......... E                                       *            R8           050          S
    15.04.2009 00:38:24 * ztta/max_memreq_MB............ 256                                     *            R8           050          S
    15.04.2009 00:38:24 * ztta/roll_area................ 100000000                               *            R8           050          S
    15.04.2009 00:38:24 * ztta/roll_extension........... 8000683008                              *            R8           050          S
    15.04.2009 00:38:24 *************************************************************************             R8           048          S
    15.04.2009 00:38:54 ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED                                          00           671          A
    15.04.2009 00:38:54 Job cancelled                                                                         00           518          A
    =================================================================
    Please suggest

    Hi,
    Here are the details as follows:
    ORACLE
    10.2.0.2.0
    =====
    HP-UX
    9000/800
    ====
    Kernel release    700
    Compilation       HP-UX B.11
    Sup.Pkg lvl.      108
    ABAP Load         1563
    CUA load          29
    =============
    SCM 5.00
    SAP_BASIS     700     0011     SAPKB70011
    SAP_ABA     700     0011     SAPKA70011
    ST-PI     2005_1_700     0003     SAPKITLQI3
    PI_BASIS     2005_1_700     0011     SAPKIPYJ7B
    SAP_BW     700     0012     SAPKW70012
    LCAPPS     2005_700     0004     SAPKIBHD04
    SAP_AP     700     0008     SAPKNA7008
    EA-IPPE     400     0007     SAPKGPID07
    SCM     500     0008     SAPKY50008
    SCM_BASIS     500     0008     SAPK-50008INSCMBASIS
    QIE     200     0004     SAPK-20004INQIE
    BI_CONT     703     0005     SAPKIBIIP5
    ST-A/PI     01I_SCM500     0000          -
    VIRSANH     530_700     0005     SAPK-53305INVIRSANH
    ========================
    Thanks,
    VK

  • How do i back up my ipod touch with out logging in to it

    how do i back up my ipod touch with out logging on to it

    Just what do you mean?

  • Background jobs are scheduled in future date

    Hi
    A system which is used by a customer test system was installed and scheduled the jobs in 2010( in future date).
    Now we have changed the date to current date. But still all the background jobs are in future date.
    There are around 500 jobs are scheduled. And it not possible to reschedule one by one.
    Is there any way workaround to change it back to current date format.
    Best Regards,
    Jai

    Dear Jai,
    The jobs scheduler should have this dates changed to current.  If its a third party system which are running these batches, then be careful to convey the same message to the 3rd party.
    If its in SAP, then the schedule change date should execute your jobs. At the same time, ensure that the transports between the test systems match to the destination.
    Do let me know for any clarification.
    Thanks
    Madhu

  • Some jobs are failing due to listener.

    Hi all,
    Only some jobs are failing ,and remaining jobs succeeded.I checked the listener, it was up only.(10.2.0.2 on linux)
    the reason for failing jobs showed is
    ORA-12541: TNS:no listener
    Can you please tell what is the reason for this
    Thanks in advance,
    Prashant

    Some of the failing jobs could be referencing a db link and you need to verify the tns alias being used in the database links
    Use tnsping <tnsalias> to verify the connect string

Maybe you are looking for