Reg. Commit Work Response time
Hi All,
Could you please let me know to which factors the response of the Commit work belong to.
Regards,
Sen
Hi,
Commit work for the database tables.
Regards,
Naresh.
Similar Messages
-
friends,
i have defined a follow-up action for txn qa11/12 and assigned a customized mail-sending fm to it..am on 4.7 and to send the mail to an internal lotus notes id using so_new_document_send_api1, but the problem is without using commit work and submit rsconn01 commands, am failing in doing the same...just want to make sure that my follow-up action will take place after all the database commits and will not cause any problems? ..please guide me on this friends...thanks in advance
regards,
Sathish. Rhi
thanks for your response...but QFOA_MAIL_SENDING_STANDARD is the fm used by a standard follow-up action that sends a mail to user's SAP office...that fm uses so_object_send to send the mail, which finally calls a commit work...just in a general sense, i hope follow up action triggers after all database commits..correct me if am wrong...i've never used perform on commit...any suggestions will be of great help
regards
Sathish. R -
Reg. commit work in a follow-up action
friends
i am using the following approach to solve a requirement which is posted in this thread..How to send a mail after a usage decision is made in QA11?
got a nice reply too
i have defined a follow-up action and assigned a customized mail-sending fm to it..my doubts are, i am on 4.7..am able to send the mail to an internal id, but the problem is without using commit work and submit rsconn01 commands, am failing in doing the same...i have read in a thread that commit work or submit (if the called program uses commit work) will cause data inconsistencies and will trigger locks if it's used in any user-exit or badi...but in my case, when will a follow-up action actually take place? will it happen after all the database commits? if so, then i believe that even i use commit work and submit commands in my z mail sending fm, it wouldn't cause any problems...am just sort of afraid whether this approach is the correct one? or triggering the mail code from the last user exit or badi itself will solve the purpose? i believe not..please guide me on this friends...helpful replies will be appreciated and awarded..thanks in advance
Regards,
Sathish. Rless views and no answers:-(
-
BCS: Performance Issue - Most of the time is spent doing commit work.
Hello,
We are experiencing performance issues with our BI server. This performance issue can been seen during our BCS runs. Our DBA has indicated that he sees a very high percentage of time time is spent doing "commit work".
Curretly, we are running BI7 nw2004s, Basis 700, support pack 14.
Anyone else experience this? As the BCS run is mainly stanard SAP code, I was wondering if there may be some snotes that correct this?
Thank you for any help you could provide us.If it is related to SEM-BCS and new EHP releases, then there are still big problems with the monitor and tasks status management (meaning problems with performance). Is it the case? If yes, then you'd better look for already released notes reg this and formulate your own OSSs if you don't find anything relevant.
-
How to count " How many times the ' commit work ' Statement is executed.
Hi all sap Champions,
One of the client requirement, That is
How to count " How many times the ' commit work ' Statement is executed.
It's urgent.
Please can anybody help me for this.
Thanks
Basuhi,
when report try like this.
declare a variable as
data: counter type i value 0.
COMMIT.
counter = counter + 1.
write:/10 counter 'NO. OF TIMES COMMIT WORKED'. -
Does commit work (commiting the changess to database take same time for ..
Does commit work (commiting the changess to database )take same time for one record and 1000 records
Hi ,
There is some micro seconds differences in updating the recors . If you have huge records ,split the data into parts and insert it .
To avoid errors or warnings ,you can use 'WAIT UPTO 5 SECONDS ' .
Thanks
Jagadeesh.G -
Update was terminated when we do commit work twice in short time
Hi Experts,
i have one Data bas update problem. My requirement is to create contracts in CRM with new item category(suppose ZSFT) than what is determined(ZSRT). i am using CRM_ORDER_MAINTAIN FM to create contracts after that i am calling CRM_ORDER_SAVE to save transaction then COMMIT WORK key word to commit in data base. Since transaction is created with Determined item category(ZSRT) i am calling change transaction bapi BAPI_BUSPROCESSND_CHANGEMULTI to change item category after that BAPI_BUSPROCESSND_SAVE to save transaction and BAPI_TRANSACTION_COMMIT to commit the work. but second commit is not happening instead error message "Update was terminated" recieved from author "XXXX". when i created test program with BAPIs to change already created contracts to change item category it is working fine.
Any body has any clue.
Thanks in advance
SivaHello Siva, Is your problem solved ? I have the same error and unable to update the partner info on Service confirmation.
Here is what I'm trying to acheive.. I'm working on an interface that creates a docflow and creates service confirmation against existing service order. In the confimation file when I have new ZAPP((partner function ZAPP) I need to delete ZAPP that gets copied over from service order into the confirmation in docflow. Right now, in my first CRM_ORDER_MAINTAIN call I have one entry for new ZAPP and I have It_docflow populated. This creates two ZAPPs on the confirmation. I need to delete ZAPP on the confirmation that is copied over from service order.
Right now I'm reading the confirmation and trying to delete the ZAPP but after my second crm_order_maintain,order save and commit call sequence I'm getting this error update was terminated.
Experts any help on how to get around this issue would be highly appreciated.
Thanks -
Dear Experts,
My requirement is that i need to send the PDF attachment via Outlook Express as Mail. I am using the FM "SO_NEW_DOCUMENT_ATT_SEND_API1" for sending to Outlook Express. Here i need to check "Commit work" flag. Else it will not be sent to the mail. When i do this, i am getting the short dump saying "MESSAGE_TYPE_X" - Pre_commit check.
Is the above issue related to any configuration settings done by Basis. I checked the forum but i could not get suitable post.
Kindly help me in this regard.
Regards,
Ramesh ManoharanHi Ramesh,
Check subrc and RETRN_CODE value for the table RECEIVERS. If subrc is inintial and Return_code is fine.
Then check with your basis team. They might need to do some config change.
I have used used a Z-FM to do this job. Find the code below.
FUNCTION z_send_pdf_2_email .
*"*"Local Interface:
*" IMPORTING
*" VALUE(EMAILID) TYPE INTAD
*" VALUE(SUBJECT) TYPE CHAR200
*" VALUE(ATTACH_NAME) TYPE CHAR200
*" VALUE(PONUM) TYPE EBELN
*" VALUE(PODATE) TYPE BEDAT
*" EXPORTING
*" REFERENCE(RETURN) TYPE SUBRC
*" TABLES
*" I_OTF STRUCTURE ITCOO
TYPES : t_record TYPE solisti1,
t_objpack TYPE sopcklsti1,
t_objtxt TYPE solisti1,
t_reclist TYPE somlreci1.
DATA : l_lines_bin TYPE i,
l_lines_txt TYPE i,
l_len_in TYPE sood-objlen,
l_date TYPE char10,
i_record TYPE TABLE OF t_record,
i_objpack TYPE TABLE OF t_objpack,
i_objtxt TYPE TABLE OF t_objtxt,
i_objbin TYPE TABLE OF t_objtxt,
i_reclist TYPE TABLE OF t_reclist,
i_tline TYPE TABLE OF tline,
w_record TYPE t_record,
w_objpack TYPE t_objpack,
w_objtxt TYPE t_objtxt,
w_objbin TYPE t_objtxt,
w_reclist TYPE t_reclist,
w_tline TYPE tline,
w_doc_chng TYPE sodocchgi1,
w_buffer TYPE string,
w_objhead TYPE soli_tab.
CONSTANTS: c_smart(5) TYPE c VALUE 'SMART',
c_u TYPE c VALUE 'U',
c_raw(3) TYPE c VALUE 'RAW',
c_f TYPE c VALUE 'F',
c_pdf(3) TYPE c VALUE'PDF',
c_x TYPE c VALUE 'X'.
* Convert OTF data to PDF
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = c_pdf
max_linewidth = 132
IMPORTING
bin_filesize = l_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT i_tline INTO w_tline.
TRANSLATE w_tline USING '~'.
CONCATENATE w_buffer w_tline INTO w_buffer.
ENDLOOP.
TRANSLATE w_buffer USING '~'.
DO.
w_record = w_buffer.
APPEND w_record TO i_record.
SHIFT w_buffer LEFT BY 255 PLACES.
IF w_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
* Attachment
REFRESH: i_reclist,
i_objtxt,
i_objbin,
i_objpack.
CLEAR w_objhead.
i_objbin[] = i_record[].
CONCATENATE podate+6(2) '.' podate+4(2) '.' podate(4) INTO l_date.
* Create Message Body Title and Description
w_objtxt = text-003.
APPEND w_objtxt TO i_objtxt.
CLEAR w_objtxt.
CONCATENATE l_date text-004 ponum text-005 INTO w_objtxt SEPARATED BY space.
APPEND w_objtxt TO i_objtxt.
CLEAR: w_objtxt, l_date.
w_objtxt = text-006.
APPEND w_objtxt TO i_objtxt.
CLEAR w_objtxt.
w_objtxt = space.
APPEND w_objtxt TO i_objtxt.
CLEAR w_objtxt.
w_objtxt = text-007.
APPEND w_objtxt TO i_objtxt.
CLEAR w_objtxt.
w_objtxt = space.
APPEND w_objtxt TO i_objtxt.
CLEAR w_objtxt.
w_objtxt = text-008.
APPEND w_objtxt TO i_objtxt.
CLEAR w_objtxt.
DESCRIBE TABLE i_objtxt LINES l_lines_txt.
READ TABLE i_objtxt INTO w_objtxt INDEX l_lines_txt.
w_doc_chng-obj_name = subject.
w_doc_chng-expiry_dat = sy-datum + 10.
w_doc_chng-obj_descr = subject.
w_doc_chng-sensitivty = c_f.
w_doc_chng-doc_size = l_lines_txt * 255.
*Main Text
CLEAR w_objpack-transf_bin.
w_objpack-head_start = 1.
w_objpack-head_num = 0.
w_objpack-body_start = 1.
w_objpack-body_num = l_lines_txt.
w_objpack-doc_type = c_raw.
APPEND w_objpack TO i_objpack.
CLEAR w_objpack.
* Attachment (pdf-Attachment)
w_objpack-transf_bin = c_x.
w_objpack-head_start = 1.
w_objpack-head_num = 0.
w_objpack-body_start = 1.
DESCRIBE TABLE i_objbin LINES l_lines_bin.
READ TABLE i_objbin INTO w_objbin INDEX l_lines_bin.
w_objpack-doc_size = l_lines_bin * 255 .
w_objpack-body_num = l_lines_bin.
w_objpack-doc_type = c_pdf.
w_objpack-obj_name = c_smart.
w_objpack-obj_descr = attach_name.
APPEND w_objpack TO i_objpack.
CLEAR w_reclist.
w_reclist-receiver = emailid.
w_reclist-rec_type = c_u.
APPEND w_reclist TO i_reclist.
CLEAR:w_reclist.
* Send Mail
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = w_doc_chng
put_in_outbox = c_x
* commit_work = c_x
TABLES
packing_list = i_objpack
object_header = w_objhead
contents_bin = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
READ TABLE i_reclist INTO w_reclist INDEX 1.
IF sy-subrc IS INITIAL.
return = w_reclist-retrn_code.
ENDIF.
*Clear Refresh Data
CLEAR: l_lines_bin,
l_lines_txt,
l_len_in,
i_record,
i_objpack,
i_objtxt,
i_objbin,
i_reclist,
i_tline,
w_record,
w_objpack,
w_objtxt,
w_objbin,
w_reclist,
w_tline,
w_doc_chng,
w_buffer,
w_objhead.
REFRESH:i_record,
i_objpack,
i_objtxt,
i_objbin,
i_reclist,
i_tline.
ENDFUNCTION. -
Reg Increasing the EJB Response Time
We are facing below performance problems in our application,
1. Response time from EJB (Stateless Session Bean) to Client (Swing).
2. Time taken for looping through the Result Set.
For 5000 records, our query is taking 0.2 Secs but looping through the ResultSet is taking around 16 seconds and Response time for transferring 160 kb (object data) from EJB to Client is taking around 30 Secs.
We have achieved some improvement in ResultSet looping time by setting the setFetchSize of ResultSet to 250.
Can anyone suggest?
1. Is there any way to increase the Data Transfer time (Response time) from EJB to Client?
2. What is the ideal value for setting the value for ResultSet.setFetchSize() ( No of records we fetch vary from 1 � 3,00,000 records)1. Response time from EJB (Stateless Session Bean) to
Client (Swing). Consider non-EJB options. They might prove efficient in your case.
2. Time taken for looping through the Result Set. Try and design your code as to not require all the records at a time.
For 5000 records, our query is taking 0.2 Secs but
looping through the ResultSet is taking around 16
seconds and Response time for transferring 160 kb
(object data) from EJB to Client is taking around 30
Secs.
We have achieved some improvement in ResultSet
looping time by setting the setFetchSize of ResultSet
to 250. There is a limit to what you can achieve with that.
Can anyone suggest?
1. Is there any way to increase the Data Transfer
time (Response time) from EJB to Client? I suppose you would want to reduce the response time.
2. What is the ideal value for setting the value for
ResultSet.setFetchSize() ( No of records we fetch
vary from 1 � 3,00,000 records)
shrug -
On our R/3 ECC6 production system ,we have one aRFC call by external system,there are 200000 times per day.
and the response time for the RFC call is 35ms ,Some times its response time(commit time) are much longer and up to 2 seconds.
There is very simple code for the RFC as shown below
insert ztable from table lt_internal_table.
commit work
call function 'function_name'
starting new task 'N'.
tables
it_tab = lt_internal_table.
Regards,
ShiChunQingDear Randorlf ,
Now i can determine that statement "commit work" have a high cost some times.
I write a simple report as show below,
One high cost will occurs per several minutes.
report ztest.
do 10 times.
GET RUN TIME FIELD t1.
INSERT ytest_table FROM TABLE lt_tab.
GET RUN TIME FIELD t2.
t1 = t2 - t1.
WRITE:/ 'insert:',t1,sy-uzeit.
COMMIT WORK.
GET RUN TIME FIELD t3.
t2 = t3 - t2.
WRITE: 'commit:',t2,sy-uzeit.
enddo.
Run results:
insert: 879 16:23:02 commit: 1,713 16:23:02
insert: 1,607 16:23:05 commit: 4,434 16:23:05
insert: 1,265 16:23:08 commit: 3,790 16:23:08
insert: 648 16:23:11 commit: 1,195 16:23:11
insert: 659 16:23:14 commit: 390,208 16:23:15
insert: 640 16:23:18 commit: 1,032 16:23:18
Best regards
shichunqing -
Hi everybody,
i have the following Problem:
create a simple composite with one Mediator wiring to one simple BPEL Process.
The BPEL throws his own Business Fault define within the WSDL.
The Mediator propagate this Fault to the inital caller.
Everthing works fine but...
The Response Time for the normal request and response of the BPEL is 300 - 400ms.
If the BPEL throws the Fault, the response Time is over 6 Seconds!!
Has anyone an idea why the Response Time from the BPEL Fault is so much higher?
Thanks a lot
regs StefanHi Neeraj,
the Problem is identified. The long Response Time comes from our internal Company Network.
The Response Times if calling the Service from hosted Environment is OK.
Regards Stefan
Edited by: stisiman on 27.03.2013 14:57 -
CO54: Message is not sent to any destination: Commit Work is getting failed
Hello,
While processing the Messages from XFP to SAP Update is getting terminated due to the use of Commit Work. SAP Note 147467 - Update termination when sending process messages has been referred which is for 4.6C, but we are in ECC6.0.
While processing the message in second iteration Commit Work triggres and Update happens in the data base.
Following Issue is only concerned with Nested HUs
T-Code used CO54
Following are the analysis:
it looks like u201CCreate and Post a Physical Inventory Docu201D is failing in the initial processing because the inventory doc is created when the Transfer Order to the PSA (or the TO from the PSA) is not yet completed (quant is still locked somehow).
CO54, process message category=ZHU_CONS: HU to be consumed is a nested pallet (unpacking/ repacking and TOs to/from) and qty to consume is greater that HU qty in SAP (creation of a physical inventory doc is required).
1. The error occurs while clearing the inventory posting for the physical inventory document.
2. The surprising factor is the u201CProcess Messageu201D is not processed correctly for the first time.
3. Indeed it is successfully processed without any error if you do process it second time.
Error Log from C054 T-Code.
02.08.2010 Dynamic List Display 1
Type
Message text
LTxt
Message category: ZHU_CONS --- Process message: 100000000000000621 "Send to All Destinations" Is Active
Message to be sent to destination:
ZHGI ZPP_0285_XFP_GOODSISSUE Individual Processing Is Active
=> Message will be sent to destination (check log for destination)
Message category: ZHU_CONS --- Process message: 100000000000000621 "Send to All Destinations" Is Active
Message destination ZPP_0285_XFP_GOODSISSUE triggered COMMIT WORK
Input parameters OK, passed to source field structure
Step 0: Now checking if scenario with HU
Step 2: Scenario with HU, Now checking if HU nested
Step 3: HU nested, checking if HU in repack area
Step 4: HU not in repack area, moving it to repack area
HU moved to repack area, TO number 0000000873
Step 5: Depacking nested HU...
Nested HU depacked, HU pallet n°: 00176127111000461994
Steps 6-7: Moving back HUs to supply storage type / bin...
HU 00376127111000462001 moved back to original area with TO number 0000000875
Steps 6-7: Moving back HUs to supply storage type / bin...
No need to move back HU 00176127111000461994 (not in table LEIN)
Step 8: Checking if HU fully used and quantity matches HU system quantity
HU not fully used but picked quantity > HU quantity: inventory necessary
Step 9: Inventory needed, creating physical inventory document...
Physical inventory document 0000000126 created
Step 10: Adding weighted quantity on inventory document...
Weighted quantity entered in document 0000000126
Step 11: Posting rectification in inventory document 0000000126...
Physical inventory document 0000000126 rectified
Error: rectification for doc 0000000126 not updated in DB!
=> Destination ZHGI ZPP_0285_XFP_GOODSISSUE can currently not process the message
=> Message is not sent to any destination
The errors in SM13 for this contain the program SAPLZPP_0285_HUINV_ENH (creating/changing the HUM physical inventory doc). WM Function module L_LK01_VERARBEITEN is also involved.
From SM13, it displays the following piece of code in include LL03TF2M (read the LEIN table=Storage Units table):
WHEN CON_LK01_NACH.
IF (LEIN-LGTYP = LK01-NLTYP AND
LEIN-LGPLA = LK01-NLPLA) OR
NOT P_LEDUM IS INITIAL.
ELSE.
Das ist der Fall einer TA-Quittierung wo Von-Hu = Nach-HU ist und sofort die WA-Buchung erfolgt. Dann steht die HU noch auf dem Von-Platz, daher darf hier kein Fehler kommen, sondern es wird ein. Flag gesetzt, daß verhindert daß die LE fortgeschrieben wird.
FLG_NO_LE_UPDATE = CON_X.
MESSAGE A558 WITH P_LENUM.
ENDIF.
Translation in English of the German text via Google:
"This is the case where confirmation of a TO source-HU = destination-HU, and now the WA (Good Issue?)- made book. Then, the HU is still on the From-space may therefore come here not a mistake, but it sets a flag that prevents that the LE is updated."
Thanks and Regards,
Prabhjot Singh
Edited by: Prabhjot Singh on Aug 2, 2010 4:39 PMHope you have carried out following things in Production ( Please refer to SAP help before actually doing it in production).
1. Transport the predefined characteristics from the SAP reference client (000) to your logon client.
2. Adopt Predefined Message Categories - In this step, you copy the process message categories supplied by SAP from internal tables as Customizing settings in your plants. -
As in many families, I am ready to upgrade my iphone 4 to a 5 and pass on my 4 to my partner (who has my old 3), BUT I am resistant to do so because I have been having problems with Safari, (very slow response time) ever since I upgraded to the new OS a month or so back. I have completed all the cleaning tips (cookies, individual app shut downs) and hard boot steps with no change. I can sit my partners Iphone 3 next to my 4 and when using Safari it beats it hands down, almost doubling the time it takes on the 3. My 4 is quicker on all the other apps so I don't believe it is a hardware issue. My tests were done using our home wi fi set up the same on both phones after running all the cleaning tips on both.
I actually broke down and called the support line and the first level support told me if I upgraded to the 5 I would likely carry the problem to the new phone. She said she suspected malware or a virus and that for $300 she could forward me to second level support that could scan my phone and see what the problem is on my 4 and support any issues on a new iphone 5 OR for a one time lower fee $79, just help me fix my 4.
Thinking through her options, I chose none of the above. Seems like I should be able to either 1) isolate the issue myself with the help of this forum or 2) upgrade to the iphone 5 and if the problem follows to the new one, get the support via the new device warranty. If the support person is correct and the problem is in the software and would follow the device, then in theroy I could wipe and restore my old 4 with the back up/data of my partners 3 and the problem on the 4 should be resolved.
I really don't want to carry the problem to a new phone if I can fix the issue first. I have airwatch software to push my work email to my phone and that is usually a pain to do when I upgrade anyhow. I don't need to pay for a new phone that has the same problem as my old one. I will get grief from my partner for passing on an issue that will come up with the daily use of the old iphone 4 that I will be responsible to fix anyhow. I have invested too much time already to generate problems on both our phones. Thanks in advance for any tips or guideance about a streamlined way forward.Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?
FYI, there are no viruses that affect iOS unless the device has been hacked or jailbroken, in which case they cannot be discussed here. -
Response time for Error Messages - Please Help
Hi
I have a PRO C application talking to an Oracle database.
The Response time for successful query is within desirable limits.
But when there is a error condition (eg SQLError -3113,or connection refused) it takes more than 9 minutes for the database to respond with the error code.
This condition is observed with only one database while the others are working fine.
What is the reason for this? Can’t it be reduced?
Regards
Davidever been faced with the same problem ?
Why deleting ? It that only one way to fix this problem ?
What are the others doing in such cases. Or am I the only one person
where has this special problem on the world. Becides I dont believe
in solving the problem through removing mentioned directory and
reinstalling. Nevertheless I will try it. I let you know about the result.
bye
sas -
How to increase built-in cisco vpn peer response timer?
Hi,
I use OS x in-built cisco vpn client to connect to work VPN.
The VPN server, or perhaps the radius server, takes a long time to return a response. OS X always try for 10 seconds, then drop the conneciton when no response from the remote peer. When I use cisco vpn client on a windows machine, the vpn client has a setting to allow for 90 seconds remote peer response time. It works fine using cisco vpn client.
I prefer to use os x as my primary working environment, so I need to fix this problme. My question is how to increase the phase 1 & 2 timer for vpn under 10.6.7. I have tried to change racoon.conf phase 1 & phase 2 timer, but it made no difference. OS X only try for 10 seconds.
Any ideas? (besides asking work people to fix the server or radius problem)
Thanks
jmsherry123i have the same problem ... certificate is imported in keychain, but cant select it when setup vpn connection
Maybe you are looking for
-
Why do we need jsp:useBean???
Hi All, I am going over both the J2EE tutorial and JSP1.2 spec. As far as I read, it seems to me that "jsp:useBean" is a way of creating a bean object. <jsp:useBean id="local" scope="application" class="Mylocales"> If I put the class file in the impo
-
I'm new to Photoshop Elements and just getting started. While in the organizer I have one group of photos up to learn with and now it says Edit in Progress with a padlock icon. How can I remove this so that the photos will be restored to normal?
-
Updated iPad 2 to ios7 - Now all my music has disappeared..
I'm sure other people have had this problem but I don't seem to be able to find an answer so I'm gonna annoy everyone by probably asking this again. Updated iPad 2 to ios7 weeks ago (whenever it came out), didn't seem to be any problems, listened to
-
How to close one booked sales order when its lines are all closed?
There's one so and its status is booked. But its lines' status is all closed. The so's status should be closed. And How can I do it?
-
Query regarding JMS MQ drivers in XI
Hi All, Is it possible to run JMS adapter with MQ version 6.0 in an environment where the JMS drivers available is of MQ 7.0 . Regards, Yogesh