Reg: Error in Getting Wrong output using concurrent request

Hi all,
I created a rdf using oracle 10g report for below query
SELECT EMPNO,ENAME,DEPTNO,SAL,MGR FROM EMP
I Registered above created rdf in oracle apps with output format as xml
when i ran the report using concurrent request, i am getting below output.
 *<G_EMP>*
* <EMPLOYEE>*
* <EMPNO>1</EMPNO>*
* <ENAME>ALEX</ENAME>*
* </EMPLOYEE>*
* <EMPLOYEE>*
* <EMPNO>2</EMPNO>*
* <ENAME>RAGHU</ENAME>*
* </EMPLOYEE>*
*<EMPLOYEE>*
* <EMPNO>3</EMPNO>*
* <ENAME>GURU</ENAME>*
* </EMPLOYEE>*
* </G_EMP>*
NOTE:_
I am not getting for rest of column in above query (ie. DEPTNO,SAL,MGR)_
How to resolve this. Its urgent .. Plz

Duplicate thread (please post only once).
Reg: Plz Help me.. Not Getting output
Reg: Plz Help me.. Not Getting output

Similar Messages

How to open Report output in RTF format using concurrent request form.

Hi
I have created a report using BI publisher and RTF format. This report is working fine in PDF format. User can submit report using consurrent request form and can see report preview in PDF format.
Now user wants to submit another request and wants to see report output in RTF format.
User submitted a request, request successfully completed and generated a output RTF file in unix box but when user wants to see report output using concurrent request form (View Output) then window is showing raw data instead of RTF output.
Can any body tell me about solutions?
Thanks
Ravi

Hi Ravi
I did little R&D on it and found following 2 solutions.I am sure that you also find something but for my shake i am putting it here.If you already find the solution then ignore it.
I) 1st Solution
1)Change the profiles 'Viewer: Application for Text' and put value as 'Browser'
2) Change the profiles 'Viewer: Text' and put value as 'Browser'.Either change it system level or concerned user.
3) Log out from Current session and close all internet explorer application.
4) Log in again to check the result
II) 2nd Solution
1) Navigate to: Sys admin --> Install -> Viewer Options to open the Form "Viewer Options".
Do the entry as shown below:
File_Format     Mime Type               Description
RTF          application/rtf Microsoft Word(.rtf)
RTF          application/msword          Microsoft Word(.rtf)
2) Then ensure that the profile option Viewer: Application for Text is set to BLANK at the Site Level and User Level.
3) Then ensure that the profile option Viewer: Text is set to 'browser' at the Site Level.
-- It will pop-up the screen to choose application name from above two values.
Hope this will work it for you. For me i replicated the scenario and both solutions were working for me.
With Best Regards
Darshan Bhavsar

Error in generating HTML output using Central Output Pro Server 5.5

I am getting the following error while generating HTML output using the Output Pro Server. A new printer was created with the Physical Device as "HTML Template Generation - [html]" and added to the Job. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [400](1801) The printer name is invalid. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [3015]Error, unable to open printer. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [3008]Error, unable to get info about device 'PAYMENTADVICEHTM.html' attached to port '<nil>'. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [400](183) Cannot create a file when that file already exists. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [2]Error opening output device/file 'PAYMENTADVICEHTM.html'. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [400](6) The handle is invalid. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [3018]Error ending page on printer. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]Nothing was printed. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [3018]Error ending page on printer.

If I were to guess, I'd guess that your filename is invalid. How about removing all special characters (spaces, brackets, etc.) from the device name. Also, make sure your form was compiled for HTML.
I haven't actually used the HTML driver, but these are general things you should do if you have trouble with any Central driver.
Regards,
Rob McDougall
Indigo Pacific

How to get this output using sql query?

Hi,
How to get this output using sql query?
Sno Name Age ADD Result
1 Anil 23 delhi Pass
2 Shruti 25 bangalor Pass
3 Arun 21 delhi fail
4 Sonu 23 pune Pass
5 Roji 26 hydrabad fail
6 Anil 28 delhi pass
Output
Sno Name Age ADD Result
1 Anil 23 delhi pass
28 delhi pass

Hi Vamshi,
Your query is not pretty clear.
write the select query using Name = 'ANIL' in where condition and display the ouput using Control-break statements.
Regards,
Kannan

Reprints output from concurrent requests

Hi, I copied the above Concurrent Program to a custom one and added 'XML Report Publisher' in the list of incompatible programs, because my custom program (Custom Reprints output from concurrent requests) should run only after XML Report Publisher completes. But the custom program ends in 'Inactive' Phase and 'NO Manager' Status. We tried bouncing the CM, but no luck. Any help is highly appreciated.
P.S: When I add XML Report Publisher to the list of incompatible programs for the seeded program - Reprints output from concurrent requests, everything works fine.
Thanks, Naveen Gagadam.

Hi Hussein, we are on: Oracle Applications : 11.5.10.2, Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi on LINUX.
I am submitting my Custom Reprints output from concurrent requests, XML Report Publisher from FND_REQUEST.SUBMIT_REQUEST. I cannot print the XML report without adding it to the list of incompatible programs because even though I submit the Custom Reprints output from concurrent requests after XML Report Publisher, it starts off before the XML Report Publisher completes and eventually it ends up in a warning. Please see below 1/2 of the log file (Will post the Other half immediately) from $FND_TOP/log. The name of the file is five_0908.mgr, 'five' being the name of the instance
Thanks, Naveen Gagadam.

Getting error while uploading workflow defination using concurrent program

I have created a custom workflow. I am trying the upload in the testing instance using the concurrent program Workflow Definitions Loader in update mode.
I am getting the following error log:
Application Object Library: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FNDWFLOAD module: Workflow Definitions Loader
Current system time is 20-JAN-2010 09:42:06
wferr:
- 1602: Could not save.
- 1400: Could not save to database. MODE=UPLOAD EFFDATE=<null>
- 1406: Workflow definition contains unsupported feature, cannot be uploaded to this database.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
Concurrent request completed
Current system time is 20-JAN-2010 09:42:07
Oracle Workflow Definition Loader 2.6.4.0.
Access level: 100, Mode: UPLOAD
Unsupported type EVENT in attribute XXOWWIRC/EVENT_MESSAGE
Unsupported type EVENT in activity XXOWWIRC/CANDIDATE_REGISTRATION
Unsupported type EVENT in activity XXOWWIRC/CREATE_APPLICATION
Unsupported type EVENT in activity XXOWWIRC/CREATE_IRC_ASG_STATUS
Unsupported type EVENT in attribute IRC_GET_XML_VALUE/EVENT
Unsupported type EVENT in attribute COMPAREEVENTPROPERTY/EVENT
Unsupported type EVENT in attribute GETEVENTPROPERTY/EVENT
Unsupported type EVENT in attribute SETEVENTPROPERTY/EVENT
Unsupported type EXTJAVA in function WFSTD/XMLCOMPAREDATE
Unsupported type EVENT in attribute XMLCOMPAREDATE/EVENT
Unsupported type EXTJAVA in function WFSTD/XMLCOMPARENUMBER
Unsupported type EVENT in attribute XMLCOMPARENUMBER/EVENT
Unsupported type EXTJAVA in function WFSTD/XMLCOMPARETEXT
Unsupported type EVENT in attribute XMLCOMPARETEXT/EVENT
Unsupported type EXTJAVA in function WFSTD/XMLGETTAGVALUE
Unsupported type EVENT in attribute XMLGETTAGVALUE/EVENT
Unsupported type EXTJAVA in function WFSTD/XMLTRANSFORM
Unsupported type EVENT in attribute XMLTRANSFORM/EVENT
Unsupported type EVENT in attribute XMLTRANSFORM/NEWDOCUMENT
Note : The same concurrent program is uploading this work flow without any error in the Development instance.
Access level information is following:
Acess Level : 100
Check box Allow modification of customized object is not checked.
For all the workflow entities access tab information is following:
customization level : 100
Access Level : 100
Protection Level : 100
Option Preserve customization is checked
Option lock at this access level is checked.
Please suggest
Regards
Devender Yadav

Well - it shouldn't, but that doesn't mean that it won't make any difference :)
If only one method doesn't work (and I must admit that I never use the concurrent program if I can avoid it), then the problem lies with the concurrent program. If none of the methods work, then there is a different problem.
If you can deploy to one environment but not to another then I would also look at the differences between environments - patches, init.ora settings, profile options etc. to see where the difference lies.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

One for the Tekkies: How to get this output using REGULAR EXPRESSIONS?

How to get the below output using REGULAR EXPRESSIONS??
SQL> ed
Wrote file afiedt.buf
1* CREATE TABLE cus___addresses (full_address VARCHAR2(200 BYTE))
SQL> /
Table created.
SQL> PROMPT Address Format is: House #/Housename, street, City, Zip Code, COUNTRY
House #/Housename, street, City, Zip Code, COUNTRY
SQL> INSERT INTO cus___addresses VALUES('1, 3rd street, Lansing, MI 49001, USA');
1 row created.
SQL> INSERT INTO cus___addresses VALUES('3B, fifth street, Clinton, OK 74103, USA');
1 row created.
SQL> INSERT INTO cus___addresses VALUES('Rose Villa, Stanton Grove, Murray, TN 37183, USA');
1 row created.
SQL> SELECT * FROM cus___addresses;
FULL_ADDRESS
1, 3rd street, Lansing, MI 49001, USA
3B, fifth street, Clinton, OK 74103, USA
Rose Villa, Stanton Grove, Murray, TN 37183, USA
SQL> The REG EXP query shouLd output the ZIP codes: i.e. 49001, 74103, 37183 in 3 rows.Edited by: user12240205 on Jun 18, 2012 3:19 AM

Hi,
user12240205 wrote:
... Frank, ʃʃp's method, I understand. But your method, although correct, I find it difficult to understand.
Could you explain how you did this?? What does '.*(\d{5})\D*' and '\1' mean???
Your method is better because it uses only ONE reg expression function. ʃʃp's uses 2.In Oracle 10.2 (I believe) and higher, '\d' is equivalent to '[[:digit:]]', and '\D' is equivalent to '[^[:digit:]]'. I find '\d' and '\D' easier to type, but there's nothing wrong with using '[[:digit:]]' and '[^[:digit:]]'.
'.*' means "0 or more of any character".
'\D*' means "0 or more non-digits".
The whole expression, '.*(\d{5})\D*' means:
a. 0 or more characters (any characters)
b. 5 digits
c. 0 or more non-digits.
'\1' is a Backreference . It means the sub-string that matched the pattern after the 1st '(', up to (but not including) its matching ')'. In this case, that means the sub-string that matched '\d{5}', or b. using the explanation immediately above.
So the entire REGEXP_REPLACE call means "When you see a sub-string consisting of a., follwed immediately by b., followed immedately by c., replace that sub-string with b. alone."

Can't view output for concurrent request

I apologize if this is a common error - I tried to research this in the forums but didn't find anything that I haven't already tried. I checked the OPP - it is running with 3 processes - no error in the log that I can see. I checked the profile for the OPP timeout and have increased it....
I have registered the data definition, registered and associated a template - created the concurrent program but when I try to run it completes with a warning and can't view output. The log states:
XDO Data Engine Version No: 5.6.3
Resp: 20420
Org ID : 81
Request ID: 2322744
All Parameters: PO=5026930
Data Template Code: GISDOSXML
Data Template Application Short Name: XXGISD
Debug Flag: N
{PO=5026930}
Calling XDO Data Engine...
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Unable to find an Output Post Processor service to post-process request 2322744.
Check that the Output Post Processor service is running.
------------- 2) PRINT   -------------
Not printing the output of this request because post-processing failed.
--------------------------------------

also - I found a note on using the XML Republish Report and I tried it with the report I ran and it erred completely. Here is the log for the republish:
Oracle XML Publisher 5.6.3
Updating request description
Waiting for XML request
Retrieving XML request information
Preparing parameters
Process template
--XDOException
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
     at oracle.apps.xdo.oa.cp.JCP4XMLPublisher.runProgram(JCP4XMLPublisher.java:683)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
Caused by: oracle.xdo.parser.v2.XMLParseException: '=' missing in attribute.
     at oracle.xdo.parser.v2.XMLError.flushErrors1(XMLError.java:324)
     at oracle.xdo.parser.v2.NonValidatingParser.parseAttrValue(NonValidatingParser.java:1556)
     at oracle.xdo.parser.v2.NonValidatingParser.parseAttr(NonValidatingParser.java:1461)
     at oracle.xdo.parser.v2.NonValidatingParser.parseAttributes(NonValidatingParser.java:1394)
     at oracle.xdo.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1225)
     at oracle.xdo.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:314)
     at oracle.xdo.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:281)
     at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:266)
     ... 17 more

XML Output from Concurrent Request DBMS_XMLGEN

I am trying to create xml output for a concurrent request, using the DBMS_XMLGEN package to generate my XML?
I have gotten so far as to be able to run my procedure and see the output in TOAD using dbms_output.put_line, but I can't seem to quite get the right link to convert this to Oracle Apps output.
I have a concurrent request setup to output XML.
This calls my procedure to return to the output file.
So far, when I run from APPS, all that shows in the Output file is 'XML document must have a top level element.'
Here is the relevant code...
ctx DBMS_XMLGEN.ctxHandle; -- vars to convert SQL output to xml
xml clob;
xmlc varchar2(4000);
off integer := 1;
len integer := 4000;
i number := 0;
rc_data sys_refcursor;
begin
-- this calls simple open cursor for sql statement, returns rows
rc_data := fa10022_data(P_BOOK_TYPE_CODE
, P_STATE
, v_BEG_DATE_EFFECTIVE
, v_END_DATE_EFFECTIVE
, P_BEG_ASSET_ACCT
, P_END_ASSET_ACCT
, v_depr_per_ctr);
ctx := dbms_xmlgen.newContext(rc_data);
dbms_xmlgen.setRowsetTag(ctx, 'XXFA10022');
dbms_xmlgen.setRowTag(ctx, 'G_DATA');
xml := dbms_xmlgen.getXml(Ctx);
i := dbms_xmlgen.getNumRowsProcessed(ctx);
dbms_xmlgen.closeContext(Ctx);
apps.fnd_file.put_line(apps.fnd_file.output, xml);
I was also following this link...
http://www.appsassociates.com/products/Generation_XML_PLSQL.pdf
any suggestions?
Thanks!!
Janel

That was painful, but it helped!
Most of it is workflow code...POXMLGEN contains the pertinent coding.
I think my problem now lies with some of my data. Depending on what is returned, I sometimes receive a warning with no output. I know there are special characters in the data (ex eacute), but I can't tell if that is what is causing the issue. I do have the statement dbms_xmlgen.setConvertSpecialChars(ctx, TRUE); in my code, so not sure what else to do.
This is what is being returned in OPP log...
Caused by: oracle.xdo.parser.v2.XMLParseException: Start of root element expected.

Getting a Calendar in Concurrent Request for input of parameters

I was wondering if anyone knew of a way to show a calendar for a date parameter when running a report set up as a concurrent request?

Were you able to solve this..?? i am gettin ghte same problem. could you please help me?

Error in Getting PDF Output

Hi,
I am using single RTF for multiple layout. By using Choose syntax i am calling layout based on condition. But its throw an exception when it try to publish pdf output *"There was an error opening this document . This file cannot be opened because it has no pages"*.
My scenario was want to Publish PO report based on PO type. Different layout for PO type.
Standard PO -->
Layout A
Blanket PO -->
Layout B
Created single RTF file , in 1st designed layoutA and in 2nd page of Same RTF file designed Layout B .
Syntax i am using before the loop start was below:-
*<?Choose?><?when:PO_TYPE='standard'?>*
Designed layout A structure
*<?end when?>---------->last statement in Layout A*
In 2nd page of same RTF
*<?otherwise?>*
Designed layout B structure
*<?end otherwise?><?end choose?> ------------> last statement in Layout B*
Please help me..
Thanks in advance
--Bennett

Hi,
I am not found any error in syntax wise in RTF. When i previewing through desktop version only i am facing these exception.. And when i register in oracle EBS getting the same one..
Thanks in advance.
--Bennet

Error in getting xml output from Apps

I have developer 10g. Whatever report (rdf) I create I face exactly the same problem. I register the report (rdf) in Apps and select xml format as the output. But when I run it to get the xml file, I get the following error
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
A semi colon character was expected. Error processing resource 'http://XXXX.XXXX.XXX.XXX:8000/OA_CGI/FNDWRR.exe?temp_id=3547...
<?xml version="1.0" encoding="&Encoding"?>
---------------------------------------^If I use Reports 6i to create exactly the same report (rdf) everything works fine (i.e I get the xml file when I run it).
What is the issue with 10g?

If you have & or any other special characters like < ,>
& lt; < less than
& gt; > greater than
& amp; & ampersand
& apos; ' apostrophe
& quot; " quotation mark
these , have to replaced by the equivalent in the sql queries. to get like & lt; , & gt; ,
because these are pre-defined in XML , so the xml will error out , if you any of these characters in the xml element value.

Error while running the rdf using concurrent program

Hi All,
I am facing the following error when i try to run the concurrent program
REP-0736: There exist uncompiled program unit(s).
REP-1247: Report contains uncompiled PL/SQL.
I am using a package in the program units. when i ues it the database its working fine. but when i use in the rdf.
it is throwing the above error.
Also the rdf is scuccessfully compiled.
Please let me know what should be done now??
Thanks
Jana

close report builder,
re-open
re-connect
open pgm unit procedure
compile each pgm unit individually
then ctrl+shift+k
ctrl+t
try now
CHK THIS LINK...may be while running, the user wont have access to the tables used in packages...
REP-1247 ERROR WHILE RUNNING REPORT
Edited by: Dora on Dec 15, 2009 10:00 AM

ERROR while getting BAPI list using JCo Action

Hi,
We are using MII 14. I have created JCo connection and also configured connection alias.
I am using this two in JCo interface action just to test whether the connection is working fine.
But I am getting "No RFC authorization for function module RFC_GET_FUNCTION_INTERFACE" when i search for BAPI_*.
Can you please guide on , what priviliges user which we will use to connect ERP from MII , should have ?
Thanks

I do not know the specific Role or Permission required. It might be in the help documentation,b ut the security folks should be able to figure it out from the error message. Someone else may know the exact Role or Roles needed.
The ID you are using does not have external access to the RFC pool, but you should also provide which RFCs you are planning to use as some have additional permissions required.
Regards, Mike
SAP Customer Experience Group - CEG

OAF: Getting wrong row using setForwardURL

Hi,
I have a page (CustomerSearchPG) with a search region and a results region. In my results region I want to select one specific row and take it with me to the next page (CustomerCreatePG). When I press the select button I get rerouted to the right page and all the fields are filled out. HOWEVER I find that it is not the row I selected that is displayed, but the first row in the SearchPG.
The following code is in my Controller:
if ("select".equals(pageContext.getParameter(EVENT_PARAM)))
{ // The user has clicked an "select" icon so we want to navigateto the CustomerCreatePG.
pageContext.setForwardURL("OA.jsp?page=/xxcu/oracle/apps/ar/customer/webui/CustomerCreatePG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO, // Do not display breadcrumbs
OAWebBeanConstants.IGNORE_MESSAGES);
Does anyone have an idea why I get the wrong row, and how I can make the right row appear?
Regards Roy
Edited by: JaddaMasa on 18.sep.2009 02:08

No If you are using the destination URL then there is no need to use the other one.
The correct destination URL would be like
OA.jsp?page=/<yourname>/oracle/apps/ak/employee/webui/EmpDetailsPG&employeeNumber={@EmployeeId}
In the CustomerCreatePG controller [Process Request]
You can get the row like
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
// Always call this first.
super.processRequest(pageContext, webBean);
// Get the employeeNumber parameter from the URL
String employeeNumber = pageContext.getParameter("employeeNumber");
Change your code accordinglty.
Thanks
--Anil

Reg: Error in Getting Wrong output using concurrent request

Similar Messages

Maybe you are looking for