Reg:File content conversion for Sender File Adaptor
Hi all,
i would like to know , how the file content conversion is written for the below mentioned XML code. The flat file will have only the table name and the fieldname
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Mt_File xmlns:ns0="http:/file_to_idoc">
<query_table>ztable1</query_table>
<row_count/>
<Fields>
<item>
<fieldname>zempno</fieldname>
</item>
</Fields>
</ns0:Mt_File>
regards
priya
First you create the conversion rules, then you create the XML structure accordingly, not the other way.
online help will help you
Similar Messages
-
File Content Conversion in Sender File
how to convert a fixed length flat file without end seperator sent to XI to a xml form?
Pleasegive me the idea of Sender Adapter configuration details (esp endSeperator)Hi,
For file content convertion if there are fixed lenth then no need to give the feildseperator,just give the fixed lenths for all the feild in FCC.
check below links for FCC
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani.
Reward Points If Helpful -
File Content Conversion in Sender File Adapter
Hi,
I am implementing a scenario, where I need to do Content conversion in My file Adapter.My input file is as follows
BGN00S-A200711281003ET4
REF38381012
DTP007D820071128
N1P5P5MicrosoftFI58-0612397
INSY18030XNAN
REFZZZZ666666666
DTP336D819970331
NM1ILIL1AdamsMarkE34666666666
PERIPIPHP770555-5555
N31470 Georgia Club Drive
N4StathamGA30666
DMGD819571022MM7
HD030HLTAE1D
My data type is as below.
<header>
<BGN>
<A></A>
<B></B>
<C></C>
<D></D>
</BGN>
<REF>
<A1></A1>
<B1></B1>
<C1></C1>
<D1></D1>
</REF>
<DTP>
<A2></A2>
<B2></B2>
<C2></C2>
<D2></D2>
</DTP>
</header>
<Content>
<N1>
<A></A>
<B></B>
<C></C>
<D></D>
</N1>
<REFAR>
<A1></A1>
<B1></B1>
<C1></C1>
<D1></D1>
</REFAR>
<DMP>
<A2></A2>
<B2></B2>
<C2></C2>
<D2></D2>
</DMP>
</Content>
My issue is, How do I set my parameter in Sender Comm channel for content conversion especially at record structure.
I have provided the value as Header,1,Content,*
But its not working.
If I do provide like
BGN_REC,,REF_REC,,DTP_REC,,N1_REC,,INS_REC,,NM1_REC,,PER_REC,,N3_REC,,N4_REC,,DMG_REC,,HD_REC,* then ,I am not getting above XML format. Please suggest or How can I modify my Data type which competes to configure in Channel
Thanks
ManmadhaHi All,
I am sorry for the Jumbled Content. I dont know what happened.
I should get the XML output as below.
header>
<BGN>
<A></A>
<B></B>
<C></C>
<D></D>
</BGN>
<REF>
<A1></A1>
<B1></B1>
<C1></C1>
<D1></D1>
</REF>
<DTP>
<A2></A2>
<B2></B2>
<C2></C2>
<D2></D2>
</DTP>
</header>
<Content>
<N1>
<A></A>
<B></B>
<C></C>
<D></D>
</N1>
<REFAR>
<A1></A1>
<B1></B1>
<C1></C1>
<D1></D1>
</REFAR>
<DMP>
<A2></A2>
<B2></B2>
<C2></C2>
<D2></D2>
</DMP>
</Content> -
File Content Conversion Problem: Sender File Adapter
Hi All,
In Sender File Adapter, how to spilt the single line into different lines using + as a separator. Plz see below my source file.
#SMESS=IV01:672633SAP:676968:::NL51:02:11+
COPS=678713:676968:070416:IV01'3:11IVFR=678713:PDA and'IND 2'9206 AD'Dtn'INIVDA=070416IVNR=6264008195:676968add1
#EMESS=0+
In above txt file there are 3 lines.
1st line starts with #SMESS
2nd line starts with COPS
3rd line starts with #EMESS.
In 2nd line, if u observe there are 3 lines separating by +. My task is, I have to spilt the 2nd line into 3 lines using + separator.
I already used the xx.endSeparator as '+' to spilt the line but it is not working....
Could anyone help me how to do this. This is very urgent
Thnx,
Kumar.Hi Shankar,
1) My Expected XML Structure:
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_IV01 xmlns:ns="http://ms.com/dev/ms">
- <Recordset>
- <DT_SMESS>
<D_9901>IV01</D_9901>
<D_9902>672633SAP</D_9902>
<D_9903>676968</D_9903>
<D_9904 />
<D_9905 />
<D_9906>NL51</D_9906>
<D_9907>02</D_9907>
<D_9908>11</D_9908>
</DT_SMESS>
- <DT_COPS_2>
<D_C022>678713</D_C022>
<D_C023>676968</D_C023>
<D_C008>070416</D_C008>
<D_C111>IV01'3</D_C111>
<D_H559>11</D_H559>
</DT_COPS_2>
- <DT_IVFR_2>
<D_C024>678714</D_C024>
<D_D333>PDA and'IND 2'9206 AD'Dtn'IN+</D_D333>
</DT_IVFR_2>
- <DT_IVDA_2>
<D_D365>070416</D_D365>
</DT_IVDA_2>
- <DT_IVNR_2>
<D_D189>6264008195</D_D189>
<D_H364>676968add1</D_H364>
</DT_IVNR_2>
- <DT_EMESS>
<D_D9901_1>0</D_D9901_1>
</DT_EMESS>
</Recordset>
</ns:MT_IV01>
2) I am not getting any error even if I use key Fields or Not becoz in the RecordSet Structure I mentioned DataType, 1 instead of DataType, *.
3) FCC Parameters:
Document Name: MT_IV01
Document Namespace: http://ms.com/dev/ms
Recordset Structure: DT_SMESS,1,DT_COPS_2,1,DT_IVFR_2,1,DT_IVDA_2,1,DT_IVNR_2,1,DT_EMESS,1
Recordset Sequence: Ascending
Key Field-type : String (Case-sensitive)
4) Error:
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'DT_COPS_2':java.lang.Exception: ERROR in configuration: more elements in file csv structure than field names specified! -
File content conversion for receiver file structure(fixed length)
Hi Experts,
I am tryinng reciver file FCC for the following strcuture. it seems I have done some wrong configuration,and failing at conversion level. so experts please help me to get the correct content conversion parameters.
note : ( * Nothing can be altered at repository side * ) and the fields are fixed in length so the file needs to be fixed lentgh format.
Tree--Occ--
TYPE
SBLSALDATA--1..1--
SBLSALDATA
SALDATA----
1..1
Headrec----
1..1
XXX----
1..1
XXX----
1..1
XXX----
1..1
TotalDatarec----
1..Unbounded
YYY----
1..1
YYY----
1..1
YYY----
1..1
YYY----
1..1
LASTREC----
1..1
ZZZ----
1..1
ZZZ----
1..1
Thanks in advance.I have done in the same procedure as in above link. its not working either.
My receiver structure looks like below.
<?xml version="1.0" encoding="UTF-8"?>
<ns1:TaxData xmlns:ns1="urn:XXXXXXXX">
<EmpTaxDat>
<Header>
<A/>
<B/>
<c/>
</Header>
<Detail>
<D/>
<e/>
<f/>
</Detail>
<Trail>
<g/>
<h/>
<i/>
</Trail>
</EmpTaxDat>
</ns1:TaxData>
Edited by: Harish.k on Jan 2, 2010 2:15 PM -
File content conversion for Receiver File
Hi,
I am using SAP PI 7.1
i am facing an error in the receiver file when using FCC.
my file structure is as below:
MT_file 1.....1
Itab_out 0.....1
item 0.....unbounded
STR 0....1
so in the receiver File C.C, i am giving the following FCC parameters:
item.fieldSeparator 'nl'
item.fieldFixedLengths 255
item.fieldNames STR
But i am getting the following error in Receiver CC
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '.fieldFixedLengths' or '*.fieldSeparator' is missing *
pls let me know what could be the problemHello,
Define your FCC parameters as shown below.
Recordset Structure Itab_out,item
item.endSeparator 'nl'
item.fieldFixedLengths 255
Itab_out.fieldSeparator 'nl'
Note: You can either use field separator or fixed length both can't be used at same time.
Regards,
Sarvesh -
File Content Conversion for Sender Channel
Hi Experts,
We are using SAP - PI 7.11 system. We have a scenario where we wld be getting 7-8 records and the record structure repeats n no.of times in a flat-file and while converting the Flat -File data into XML data we are facing an issue , explained below with an example :
HEADER : KeyField , f2, f3, f4, f5, f6, f7, f8
RECORD1 : f1, f2, KeyField , f3, f4, f5, f6, f7 , f8
RECORD2 : f1, f2, f3, f4, KeyField, f5, f6, f7, f8
TRAILER : keyField, f1, f2, f3, f4,f5, f6, f7, f8.
Its a fixed length flat - flie. Now the problem is : we have KeyField Value for RECORD1 as '0' and when the f3 of TRAILER is '0' the record is getting formed as RECORD1 instead TRAILER even i get proper keyField value for TRAILER RECORD. Could you please tell me why its happenning so ? And please provide the solution for this. I have used all the parameters like : fieldNames, fieldfixedLengths, keyFieldValue, endSeparator and ignoreRecordsetname and lastFieldOptional and fromConfiguration.
But still i am not able to get the proper XML out of this flat - file. Could you please suggest any solution for this asap.
Thanks & Best Regards,
LakshmanMost of the configuration seems fine,
Just validate your configuration against below configuration, which is working fine for me,
Recordset Structure : HEADER, 1, RECORD1, ,RECORD2,,TRAILER,1
Recordset Sequence : Ascending
Recordsets per message : *
Key Field Name : recid
Key Field type : string
HEADER.fieldFixedLengths *********************
HEADER.endSeparator 'nl'
HEADER.fieldNames ************************
HEADER.keyFieldValue 01
HEADER.keyFieldlnStructure add
HEADER.lastFieldsOptional YES
-santosh. -
Regarding file content conversion in Sender File channel
Hi all,
In one of my requirement, one file contains several details records as given below,
101,india,1001,albert,517193
101,india,1002,hilbert,517193
101,india,1003,robert,517193
102,nepal,1004,kiran,9234334
102,nepal,1008,kiran,9234334
102,nepal,1003,kiran,9234334
103,nepal,1004,kiran,9234334
103,nepal,1008,kiran,9234334
103,nepal,1003,kiran,9234334
i want to send all the records which starts with 101 to one function module and all records which starts with 102 to another function module and all records which start with 103 to some other function module. In my sender channel i am planning to use
101, 102, 103 as key field values to read them into 3 different structures.
like Recordsset structure = detail1,, detail2,,detail3,*.
Details1.keyfieldvalue = 101
Details2.keyfieldvalue = 102
Details3.keyfieldvalue = 103
Will this idea work out??
Thanks,
BaluHi Balu,
Yes u r correct, u can access the records by setting the key field value as u mentioned.
But other way is also by,
access the all records as similar one, so no key field value.
the whole record as a single element.In the mapping u have a string function called StartsWith.
In mapping u can specify if the incoming record starts with 101 then map it to FM1(Fumction Module 1).
If the record starts with 102 map it to FM2......
This will be very simpler i feel...
If i am nt clear pl do post the problem in detail.
Babu -
Key field values for file content conversion at sender communicationchannel
Hi all,
I am working on scenario File to Idoc.In this scenario at the sender side we configure the file content conversion for .CSV file.
In the flat file i am having more than one orders, XI will pick the file and creates a separate Idoc for each sales order at r/3.
We have similar fields "Order Item Number" both header and item.
If we got '00000' on the Header item then it should create a new idoc at the r/3 side other wise it will create line item.
Order item number will be 00000 for header but it will differ from order item to item.
source structure
Order Header
Order type
Sold-to-code
PO number
Order item number
Order date
AdresName1
AdresName2
Street and House number
Postal Code
City
Country Code
Filler
Order Item
Order type
Sold-to-code
PO number
Order item number
Order date
Product code
Order quantity
Item text
Filler
Now I have some questions....
I don't have standard filed values to give the key fileds at source structure.
I need to create the Idoc at r/3 system for each individual record.
Is it possible to create new idoc with out using the Key filed value?
If it is possible then how can i proceed with fcc?
please give me your valuable suggestions
Best Regards,
satya
Edited by: satyatanuku on Mar 3, 2010 1:41 PM
Edited by: satyatanuku on Mar 3, 2010 1:42 PM
Edited by: satyatanuku on Mar 3, 2010 1:44 PMHi,
Just check the Content Conversion Parameters- Recordset Structure.
If you have filled in this parameter with
Header,1,Item,1
then change it to
Header,1,Item,3
Regards
Chandra -
Content Conversion for Sending Communication Channel using File Protocol
I have a file as follows:
CUSC,CRCA,OBAL,DATE
10197,0111,15250094.05,20071008
10758,0111,8131440.17,20071008
12939,0111,8212006.53,20071008
13129,0111,6953749.77,20071008
13331,0111,8607294.15,20071008
13579,0111,11972774.95,20071008
13676,0111,6636698.47,20071008
What is the content conversion that I can proceed with so that I can go with the mapping. I have to use File Adapter?
Please HelpHi,
Check below links for Content conversion.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani
Reward points if Helpful -
File content conversion in Sender Adapater for multiple occurances
Hi ,
I am mapping from flat file to idoc .
My flat file is a tab demilited
Since the idoc would have structure
like header , lineitem , schedule
in my flat file conversion
i am giving recordset structure
as header,1,lineitem ,,schedule,
since lineitem would be repeated many times
Bt if i give * i need to give a keyfieldname
which would mean that keyfieldname has to appaer in header and schedule .
since in my case my Column values in header , lineitem and schedule are different
how can i do the file conversion in this case
i can doing something like this
header.keyFieldValue ""
schedule.keyFieldValue ""
header.keyFieldInStructure ignore
schedule.keyFieldInStructure ignore
i am not even sure if thats the correct way
Thanks
AmitHi Amit,
Take a look at these...
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
cheers,
Prashanth
P.S Please mark helpful answers -
FCC (File Content conversion)-In sender
Hi All,
Using FCC in sender i need to convert text to xml.Such that my text file format is
Line1
Line2
Line3
All the three lines is having some data..My source data type structure is
DT_Emp
>Emp_Info
>Header
ID----
(0..1)
>Details
Line----
(0..unbounded)
Now i need to get data from text file into only line element..My ID element should be blank..XML should have ID element but it should not be populated from input file.How to get this using FCC..Is there any parameters for this?
Can anyone give some useful ideas
Regards
VenkatHI,
For FCC Check this links.
File content conversion sites
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
phani -
File content conversion on Sender Side
Hi,
I am doing file content conversion on sender side.when i am executing the scenario,i am getting the following error in sxmb_moni:
Invalid at the top level of the document. Error processing resource 'file:///D:/Documents and Settings/...............
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?><!-- Inbound Message --> DOC_HEADER ...
when i right click on the pyaload and select view source
its displaying the whole flat file with the following line at the beginning:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?><!-- Inbound Message -->
i have given all the parameters correctly....
in sxmb_moni.....the error category is Mapping and the error id id EXCEPTION_DURING_EXECUTE
Please help me with this error.
thanks n regards,
anuradhaHi !!
The best way to debug would be to add TRACE statements in your mappigs. In both Graphical and java Mapping.
Trace out the entire output of java mapping and see if this is the input that the next mapping expects.
For trace , http://help.sap.com/saphelp_nw04/helpdata/en/c8/98e7d5c1620642973565ea3dd319d1/content.htm
refr this links also
Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Name expected
unsported character error in message mapping
Re: HTTP to RFC Mapping error:com.sap.aii.utilxi.misc.api.BaseRuntimeException:
Exception com.sap.aii.utilxi.misc.api.BaseRuntimeException
Re: Outbound error
Re: mapping error
error in file to file
have a look at this weblog on how to test your mapping
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Thanks !!! -
File Content Conversion for Unequal Number of Columns
Hi,
Iam following this thread FCC for Unequal Number of Columns.
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
when iam doing ,iam getting an error
Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'TOTALSET.fieldFixedLengths' or 'TOTALSET.fieldSeparator' is missing Consistency check: no. of arguments in 'TOTALSET.fieldFixedLength' does not match 'TOTALSET.fieldNames' (0 <> 1)
My conversion parameters are
Recordset Structure : TOTALSET,*
TOTALSET.fieldNames : ITEMSET
ignoreRecordsetName : true
TOTALSET.fieldSeparator : 'nl'
My file structure is as below
01,021000021,G4886704,080919,0742,001,,,2
02,G4886704,021000021,1,080918,0742,,2
03,000000135073477,,010,105303839,,,015,489113155,,,045,489039455,,,072,73700
Please help in resoving the error.
Thanks in Advance
SrinivasHi Srivinas,
your file structure is as below
01,021000021,G4886704,080919,0742,001,,,2
02,G4886704,021000021,1,080918,0742,,2
03,000000135073477,,010,105303839,,,015,489113155,,,045,489039455,,,072,73700
So it's easy, you have to use KEYFIELD option, coz you have something like that :
Line 1 : keyfield = 01 following by a limited number of columns (e.g 30 fields for Structure1)
Line 2 : keyfield = 02 following by a limited number of columns (e.g 14 fields for Structure2)
Line 3 : keyfield = 03 following by a limited number of columns (e.g 23 fields for Structure3)
Thanks to the Keyfield, you define a field which is present in each line that you can used to distinguished the different structures of lines. In your case, it seems that the keyfield is the first column (01, 02, 03).
Try to use that:
Recorset = TOTALSET (and don't use option "ignoreRecordsetName : true")
Recordset structure =Structure1,1,Structure2,(star),Structure3,(start) (the difficulty will be to find the good use of "*" and "1", but after some tests you will find the good one).
Note: replace (start) by the character " * "
Key field value = keyfield
Key field type = String (case sensitive)
Structure1.fieldNames = keyfield,field2, field3 etc.. of Structure1
Structure2.fieldNames = keyfield,field2, field3 etc.. of Structure2
Structure3.fieldNames = keyfield,field2, field3 etc.. of Structure3
and then you will have a XML like that:
TOTALSET
Structure1 and all its fieldN
Structure2 and all its fieldN
Structure2 and all its fieldN
Structure3 and all its fieldN
Structure3 and all its fieldN
TOTALSET
Structure1 and all its fieldN because I used Structure1,1
Structure3 and all its fieldN
Regards.
Mickael
Edited by: Mickael Huchet on Apr 20, 2009 5:18 PM
Edited by: Mickael Huchet on Apr 20, 2009 5:19 PM -
Hierarchy on file content conversion for receiver?
Y'all,
I'm stuck in this problem and I haven't find a solution to solved it... so, all your clues and reply's are really appreciate...
The basic problem is a File content conversion for a receiver C.C. that is not working and it's raising some errors in the RWB, I have gone thru some blogs but I still having a lot of doubts...
I want to produce a flat TXT file that will have a line for every node or subnode, it doesn't matter if it's not represented as hierarchical structure like this one... but the records must be produced or written in the same order...
Man_Del_Header as main node with Man_Header, Delete_Detail and Trailer as subnodes...
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_DISTRIBUTOR_DELETE xmlns:ns1="http://xxx.com/xi/POSout">
<Man_Del_Header>
<MD_Header>|HM|1|</MD_Header>
<MD_StoreNumber>051</MD_StoreNumber>
<MD_filler1>|2|0000|3|</MD_filler1>
<MD_EffDate>09/17/07</MD_EffDate>
<MD_filler2>|4|005|5|dsdvnd|7|</MD_filler2>
<MD_BatchNumber>500</MD_BatchNumber>
<MD_fiiller3>|8|</MD_fiiller3>
<MD_BatchDescr>DELETE PREV CST BTCH</MD_BatchDescr>
<MD_filler4>|10|D|</MD_filler4>
<MD_linef>1</MD_linef>
<Man_Header>
<Man_Header>|HM|1|</Man_Header>
<Man_StoreNumber>051</Man_StoreNumber>
<Man_filler1>|2|0000|3|</Man_filler1>
<Man_EffDate>09/17/07</Man_EffDate>
<Man_filler2>|4|005|5|dsdvnd|7|</Man_filler2>
<Man_BatchNumber>500</Man_BatchNumber>
<Man_filler3>|8|</Man_filler3>
<Man_BatchDescription>Delete Distributor</Man_BatchDescription>
<Man_filler4>|</Man_filler4>
<Man_linef>Constant</Man_linef>
</Man_Header>
<Delete_Detail>
<Delete_Detail>|D|901|170|</Delete_Detail>
<Delete_DistribNumber>0000005010</Delete_DistribNumber>
<filler9>|</filler9>
<delete_linef>1</delete_linef>
</Delete_Detail>
<Delete_Detail>
<Delete_Detail>|D|901|170|</Delete_Detail>
<Delete_DistribNumber>0000005011</Delete_DistribNumber>
<filler9>|</filler9>
<delete_linef>1</delete_linef>
</Delete_Detail>
<Trailer>
<Trailer>|T|1|</Trailer>
<TotalRecCnt>00005</TotalRecCnt>
<filler1>|2|</filler1>
<NoOfHeaders>00002</NoOfHeaders>
<filler2>|3|</filler2>
<NoOfAdds>00000</NoOfAdds>
<filler3>|4|</filler3>
<NoOfChanges>00000</NoOfChanges>
<filler4>|5|</filler4>
<NoOfDeletes>00002</NoOfDeletes>
<filler5>|13|</filler5>
<NoOfSubstitution>00000</NoOfSubstitution>
<filler6>|</filler6>
<linef>1</linef>
</Trailer>
</Man_Del_Header>
<Man_Del_Header>
<MD_Header>|HM|1|</MD_Header>
<MD_StoreNumber>061</MD_StoreNumber>
<MD_filler1>|2|0000|3|</MD_filler1>
<MD_EffDate>09/17/07</MD_EffDate>
<MD_filler2>|4|005|5|dsdvnd|7|</MD_filler2>
<MD_BatchNumber>500</MD_BatchNumber>
<MD_fiiller3>|8|</MD_fiiller3>
<MD_BatchDescr>DELETE PREV CST BTCH</MD_BatchDescr>
<MD_filler4>|10|D|</MD_filler4>
<MD_linef>1</MD_linef>
<Man_Header>
<Man_Header>|HM|1|</Man_Header>
<Man_StoreNumber>061</Man_StoreNumber>
<Man_filler1>|2|0000|3|</Man_filler1>
<Man_EffDate>09/17/07</Man_EffDate>
<Man_filler2>|4|005|5|dsdvnd|7|</Man_filler2>
<Man_BatchNumber>500</Man_BatchNumber>
<Man_filler3>|8|</Man_filler3>
<Man_BatchDescription>Delete Distributor</Man_BatchDescription>
<Man_filler4>|</Man_filler4>
<Man_linef>Constant</Man_linef>
</Man_Header>
<Delete_Detail>
<Delete_Detail>|D|901|170|</Delete_Detail>
<Delete_DistribNumber>0000005012</Delete_DistribNumber>
<filler9>|</filler9>
<delete_linef>1</delete_linef>
</Delete_Detail>
<Delete_Detail>
<Delete_Detail>|D|901|170|</Delete_Detail>
<Delete_DistribNumber>0000005013</Delete_DistribNumber>
<filler9>|</filler9>
<delete_linef>1</delete_linef>
</Delete_Detail>
<Delete_Detail>
<Delete_Detail>|D|901|170|</Delete_Detail>
<Delete_DistribNumber>0000005014</Delete_DistribNumber>
<filler9>|</filler9>
<delete_linef>1</delete_linef>
</Delete_Detail>
<Trailer>
<Trailer>|T|1|</Trailer>
<TotalRecCnt>00006</TotalRecCnt>
<filler1>|2|</filler1>
<NoOfHeaders>00002</NoOfHeaders>
<filler2>|3|</filler2>
<NoOfAdds>00000</NoOfAdds>
<filler3>|4|</filler3>
<NoOfChanges>00000</NoOfChanges>
<filler4>|5|</filler4>
<NoOfDeletes>00003</NoOfDeletes>
<filler5>|13|</filler5>
<NoOfSubstitution>00000</NoOfSubstitution>
<filler6>|</filler6>
<linef>1</linef>
</Trailer>
</Man_Del_Header>
</ns1:MT_DISTRIBUTOR_DELETE>
|HM|1|051|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|DELETE PREV CST BTCH|10|D|1
|HM|1|051|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|Delete Distributor|Constant
|D|901|170|0000005010|1
|D|901|170|0000005011|1
|T|1|00005|2|00002|3|00000|4|00000|5|00002|13|00000|1
|HM|1|061|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|DELETE PREV CST BTCH|10|D|1
|HM|1|061|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|Delete Distributor|Constant
|D|901|170|0000005012|1
|D|901|170|0000005013|1
|D|901|170|0000005014|1
|T|1|00006|2|00002|3|00000|4|00000|5|00003|13|00000|1
So as you can see, i wanna produce a flat file that will have line or record for each node, it doesn't matter that it has a hierarchy or a deeper level, it should be a simple flat file...
The thing is that i have been trying to setup the receiver comm. channel and it's raising some errors like Could not process due to error:
<i>java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value 'XXXX')', probably configuration error in file adapter (XML parser error)'</i>
I have checked this blog:
/people/karthiknarayan.kesavan2/blog/2007/08/22/file-content-conversion-for-multi-hierarchical-structure
Unfortunately i don't know if there's another way to achieve this...Jerry,
it easy if you go with multi mapping concept and without BPM if you are above >XI3.0 SP14.and use Append mode in the receiver file adapter.
just create the target structure like root under that Man_Del_Header,Man_Header,Detail,Trailer at the same level but got be careful with occurences.
<b>Source:</b>
I think from your structure you have
Man_Del_Header (1-unb)
Man_Header (1-1)
detail (0-unb ) may be (1-unb)
trailer (1-1)
create <b>target DT</b> like:
ROOT
..Man_Del_Header (1-1)
..Man_Header (1-1)
..detail (0-unb ) may be (1-unb)
..trailer (1-1)
all are at same level under ROOT.
create MT,MI,MM,IM.
in MM just map correspoding fields and if you have any unbounded onces map the nodes too. and map Man_Del_Header in the source to MT_XYZ (important)
and in the MM go to MESSAGES tab and change the occurences of the target Message to 0-unbounded same way in the interface mapping 0-unbounded.
here it create anothe extra node in the mapping something like Message1,this is ok.
and in ID just create all other objects like as usual except creating Interface determination ,in that select the extended radio button.
in reciever File CC use FCC ,would be very simple in the recordsetstrcture give
your four nodes Man_Del_Header,Man_Header,Detail,Trailer.
and use either fixed or field seperator.use append mode in recv File CC otherwise it will generate files as many occurences your source "Man_Del_Header" has ,cos we are mapping it to the MT--xyz .
thats it you are ready to go...
if any error post back here again.
you can make use of this thread
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible (here there are two target DT ,but you just create one DT,remaining are similar)
good luck.
Babu
Maybe you are looking for
-
Anyone have an idea how to fix the sound coming from the MAc to my TV?
-
Unable to manage Distribution list membership since moving from Exchange 2003 to Exchange 2010
Hi, We have recently started migrating from Exchange 2003 to Exchange 2010. One of our customers used to be able to manage a security group through the outlook address book. This is a mail enabled security group where the customer is on the "Manage
-
Which MacBook Pro for recording?
I'm looking to buy a MacBook of some kind, but I'm unsure of which one to get. Right now I think I'm going with the pro. So if I want to record on Logic 8 with an average amount of plug-ins and tracks, should I go with 2.4GHz or 2.5GHz? I was assumin
-
Calling an EJB application in webdynpro
Dear SDN's, I am trying to call an EJB application from a webdynpro application and is succeded in storing values to database via Java Bean Model. I want to retrieve all records from table via EJB and all the records should be displayed in Webdynpro
-
Does iCloud work with Windows 8? If not, when is it anticipated that it will? I want to sinc Microsoft Outlook between my computer and SmartPhone.