Reg:finding out the function module to manager of organization unit

Hi Experts,
Is there any function module for finding out the Manager to organization unit.

RH_GET_LEADING_POSITION gives you the position of the manager

Similar Messages

Table to find out the function modules used in a particular program

Hi,
Is there any standard table to find out the function modules used in a particular program?
Such as there is a table D010TAB to find out the tables used in a program .

Hello
There is no exist such table.
But try this snippet:
REPORT ZSEARCH.
PARAMETERS: P_NAME LIKE D010SINF-PROG.
DATA: PROGTXT(72) TYPE C OCCURS 0 WITH HEADER LINE.
DATA: TMP(72) TYPE C OCCURS 0 WITH HEADER LINE.
DATA: FUNCT TYPE RS38L_FNAM OCCURS 0 WITH HEADER LINE.
DATA: INCL TYPE RSEUINC OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'RS_GET_ALL_INCLUDES'
     EXPORTING PROGRAM    = P_NAME
     TABLES    INCLUDETAB = INCL.
LOOP AT INCL.
READ REPORT INCL-MASTER INTO TMP.
APPEND LINES OF TMP TO PROGTXT.
REFRESH TMP.
ENDLOOP.
READ REPORT P_NAME INTO TMP.
APPEND LINES OF TMP TO PROGTXT.
LOOP AT PROGTXT.
IF PROGTXT CS 'CALL FUNCTION'.
    SEARCH PROGTXT FOR ''''.
    IF SY-SUBRC = 0.
      DO.
        SHIFT PROGTXT LEFT BY 1 PLACES.
        IF PROGTXT(1) = ''''.
          SHIFT PROGTXT LEFT BY 1 PLACES.
          DO.
            SHIFT PROGTXT RIGHT BY 1 PLACES.
            IF PROGTXT+71(1) = ''''.
              SHIFT PROGTXT RIGHT BY 1 PLACES.
              CONDENSE PROGTXT.
              FUNCT = PROGTXT. COLLECT FUNCT. EXIT.
            ENDIF.
          ENDDO.
          EXIT.
        ENDIF.
      ENDDO.
    ENDIF.
ENDIF.
ENDLOOP.
SORT FUNCT.
LOOP AT FUNCT.
WRITE: FUNCT. NEW-LINE.
ENDLOOP.

How to find out the Functional module related to a T-code

Hi All ,
Please tell how to find out the Functional module related to a T-code.
i want it for the T-code RSZDELETE.

Hi
There is no direct way to see this.
You need to Pick the Program(Se37/38) and tables (SE16/11)and to see where its been used
The FM for RSZDELETE is RSZ_DB_COMP_REORG_AS_POPUP.
Hope it helps

Wants to find out customise function module in SAP

Hi all There,
I want to find out Customize Function Module in SAP,
I am not able to find out though SE03.
Pl provide the detail solution
Regards
Sagar

hi,
Custom function module start with Z or Y.So go to table TFDIR and enter z* and y* on input screen field function module name and then check number on entries by pressing tab number of entries on application toolbar.
So number of custom function module = z(number of entries) + y(Number of entries) .
Thanks
Mohit

List out the function modules..

Hi Friends..
I want to list out all the available function modules and also i want to store all the function modules in internal table for that purpose what can i do..
Thanks
Gowrishankar

Here is the porgram to display the list of functionmodules in the SAP IN alv.
*& Report ZDEMO_ALVGRID                                               *
*& Example of a simple ALV Grid Report                                 *
*& The basic requirement for this demo is to display a number of       *
*& fields from the TFDIR table.                                         *
REPORT zdemo_alvgrid                 .
TABLES:     TFDIR.
type-pools: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_TFDIR .
include structure   TFDIR .
types : END OF t_TFDIR.
DATA: it_TFDIR TYPE STANDARD TABLE OF t_TFDIR INITIAL SIZE 0,
      wa_TFDIR TYPE t_TFDIR.
select-options : s_FUN for TFDIR-FUNCNAME.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
      gd_tab_group type slis_t_sp_group_alv,
      gd_layout    type slis_layout_alv,
      gd_repid     like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
*perform build_layout.
perform display_alv_report.
*&      Form BUILD_FIELDCATALOG
*       Build Fieldcatalog for ALV Report
form build_fieldcatalog.
fieldcatalog-fieldname   = 'FUNCNAME'.
fieldcatalog-seltext_m   = 'Purchase Order'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
* fieldcatalog-do_sum      = 'X'.
* fieldcatalog-no_zero     = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PNAME'.
fieldcatalog-seltext_m   = 'PO Item'.
fieldcatalog-col_pos     = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'INCLUDE'.
fieldcatalog-seltext_m   = 'Status'.
fieldcatalog-col_pos     = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'FREEDATE'.
fieldcatalog-seltext_m   = 'Item change date'.
fieldcatalog-col_pos     = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'APPL'.
fieldcatalog-seltext_m   = 'Material Number'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MAND'.
fieldcatalog-seltext_m   = 'PO quantity'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'FMODE'.
fieldcatalog-seltext_m   = 'Order Unit'.
fieldcatalog-col_pos     = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'HOST'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-do_sum      = 'X'.        "Display column total
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'UTASK'.
fieldcatalog-seltext_m   = 'Price Unit'.
fieldcatalog-col_pos     = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
*       Build layout for ALV grid report
*&      Form DISPLAY_ALV_REPORT
*       Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
*            i_callback_top_of_page   = 'TOP-OF-PAGE' "see FORM
*            i_callback_user_command = 'USER_COMMAND'
*            i_grid_title           = outtext
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
*            it_special_groups       = gd_tabgroup
*            IT_EVENTS                = GT_XEVENTS
            i_save                  = 'X'
*            is_variant              = z_template
       tables
            t_outtab                = it_TFDIR
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
*       Retrieve data form EKPO table and populate itab it_TFDIR
form data_retrieval.
select *
from TFDIR
into table it_TFDIR where FUNCNAME in s_FUN.
endform.                    " DATA_RETRIEVAL
reward points if it is usefull ..
Girish

Process to find out tables & functional module

Hi,
I would like to know the process to find out tables for configured objects not the master data objects and also the process for finding a functional module for particular application like action.
regards Srinath

Hi
There is no direct way to see this.
You need to Pick the Program(Se37/38) and tables (SE16/11)and to see where its been used
The FM for RSZDELETE is RSZ_DB_COMP_REORG_AS_POPUP.
Hope it helps

How to findout the Function module for a particular object

Hello friends,
   Related to my thread, there was one thread in the forum,to find out the function module for a particular object.I tried the solution provided my our experts but couldn't got the results.Thats why i am putting this thread again.
I want to find out the function modules used for the particular object, i.e. Production order.
   solution i tried is, first go to T.C SE37, then in function module field put the object name like Production order and enter, than it will show another screen, there also put object name in function module field and than press enter, it will show all the function modules available for that object.
    So could you guys help me out to find out where i am wrong in the process of finding out the function module for a particular object.
                       Plz don't bother abt the point.Helpful answers will definitely get awarded.
                            Thanking you guys for your valuable support till now and hoping to get in future too.

Dear
When the problem is solved please give points too. Otherwise why people will help others, give time and share their valuable knowledge. This will build up self confidence.
If not solved and closing, then mention the difficulties what u exactly looking for. Simpy closing is not enough because who ever is providing solution will not able to know the real problem.
How to give points I believe u already know that and need not explain.
I had seen many times this problem with others too. Even if the problem is totally resolved they give 2 in stead of 10.
Edited by: BNR on Sep 21, 2008 6:10 PM

How to make use of SE37- Function Module & how to find out the table?

Hi ,
1.Could anyone help me what's this SE37-Function module is all about,How to make use of this?
For Eg,If i want to delete a BOM permanently from the system then I have to use the Function module CM_DB_DEL_FROM_ROOT_BOM.
But after giving the particular name what should i do?
Please help me.
2.How to find out the respective table for a particular field sya for T code-COGI, T code MFBF,where its values are getting populated.,Please help in this issue.
Thanks in adavnce for spending some time
Raj.S

Hi Raj
Function Modules
Function modules are procedures that are defined in special ABAP programs only, so-called function groups, but can be called from all ABAP programs. Function groups act as containers for function modules that logically belong together. You create function groups and function modules in the ABAP Workbench using the Function Builder.
Function modules allow you to encapsulate and reuse global functions in the SAP System. They are managed in a central function library. The SAP System contains several predefined functions modules that can be called from any ABAP program. Function modules also play an important role during updating and in interaction between different SAP systems, or between SAP systems and remote systems through remote communications.
Unlike subroutines, you do not define function modules in the source code of your program. Instead, you use the Function Builder. The actual ABAP interface definition remains hidden from the programmer. You can define the input parameters of a function module as optional. You can also assign default values to them. Function modules also support exception handling. This allows you to catch certain errors while the function module is running. You can test function modules without having to include them in a program using the Function Builder.
The Function Builder also has a release process for function modules. This ensures that incompatible changes cannot be made to any function modules that have already been released. This applies particularly to the interface. Programs that use a released function module will not cease to work if the function module is changed.
Check this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
You can execute function module in SE37ie you can perform the activiites defined in the function module by executing it.
By deleting BOM you mention the FM name in se37 and execute. In some function module it will ask input parameters as developed in the program , you have to give the input parameters and execute.

Function Module to find out the release value in contract

Dear All,
I have to upload the contract with new accoutn assignment without changing the existing contract. For that i have to download all the existing contract data with value.
In that case i have some issues regarding the value.
For example : In the system old contract is created with value 1000 and the released value as 500.
In that case i have to uload the new contract with all the details of existing contract with value of 500 (1000-500=500).
How can i get the value (500) and from which table.Is there any functional module to find out the release value in contract.
Thanks and regads,
PM
Edited by: PM on Jan 21, 2010 8:40 AM
Edited by: PM on Jan 22, 2010 9:48 AM

Hi
You need to link the table VBFA and VBAK.
For a contract you can check all the subsequent document (which you can filter whether you want to see Order / delivery / Billing) in VBFA and then from there pick the subsequent document no. and then from VBAK you can pick the Net value of these subsequent documents, and so you will have both the values (value of Contract and value in subsequent document) and you can determine the balance value.
Regards
Amitesh Anand

How to find out the Area Menu for a Report/ Table/Function Module

Hi,
Is there any procedure to find out the <b>"AREA MEANU"</b> for a Report/Table/Function Module...
Or is there any Transaction code / Report is available to find out all the report for a particular "AREA MENU".
Thank you for your quick response...
Regards,
Thiru
<b></b>

Hi,
Check these below threads:
user log in & log out time SAO
How to find user log-out time ?
Regards,
Nitin

How to find out the inbound function module in the extended idoc

Hi,
how to find out the inbound function module in the extended idocs
Thanks .

through we41/we42 you can find the inbound function module.......
or
thorough we19(idoc test tool) ....
give the input as message type or basic idoc..
press exec...
then you can find th button on application tool bar as inbound funtion module....
from here also you can find..........
<REMOVED BY MODERATOR>
Khasimsa
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 1:34 PM

Function module to find out the changed values from tables

What is the standard function module to find out the changed values (the old & new values) from tables in SAP ?

Hi Harish,
Please elaborate your requirement...
Please have a look on CDHDR AND CDPOS tables... it contains changed data... but all chages are not being tracked using it..
Try Below FMs as well..
For Header Level...
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
    EXPORTING
      date_of_change    = cdhdr-udate
      objectclass       = cdhdr-objectclas
      objectid          = cdhdr-objectid
      time_of_change    = cdhdr-utime
      username          = cdhdr-username
    TABLES
      i_cdhdr           = icdhdr
    EXCEPTIONS
      no_position_found = 1
      OTHERS            = 2.
For Item Level
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
      EXPORTING
        changenumber      = icdhdr-changenr
      IMPORTING
        header            = cdhdr
      TABLES
        editpos           = icdshw
      EXCEPTIONS
        no_position_found = 1
        OTHERS            = 2.
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya

How can I find out the web interface a module function is executed from?

Hello all,
I was wondering if anybody knows how would be possible de determine the web interface a function is being launched from, within the function.
I've got this function that is used for a exit variable that updates the variable value depending on another variable in a web interface. The thing is that this very same function and variable will be used in many web interfaces and the "source" variable will be different for each mask.
So, for example, mask 1 will have variable 1 as a selector variable and variable X will be updated by it. Then I also have variable 2 in mask 2 as a selector variable and variable X will be updated by it as well.
I want to develop a code, within the function module, that depending on the web interface that is calling it, it will use a source the correct variable and for this I need to know which web interface is calling the function.
I hope to have been able to explain myself clearly. It's a purely technical question.
Thanks in advance.
Best regards.

Hi Francesco,
Are you talking about that ??? )) It will explain you about to get the name of the web page when you are executing an abap function for determining the values of variables...
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20make%20a%20variable%20even%20more%20flexible%20in%20bw-bps.pdf">How to make a variable even more flexible in BW-BPS?</a>
This is weird: I wrote that document a few weeks ago, it is theorically published on SDN but this is not possible to find it by using the research tool... Maybe because it applies only to BPS in 3.5. I did not have enough time to migrate that solution to BI-IP 7.0.
Regards
Laurent

How to Find out the all tables in module wise ?

Dear Friends,
1.How to Find out the all tables in module wise ?
what are the total number of table in SAP ?
2. how to find out all existing functions in SAP ?
Thanks and regards,
Subasha Chandra Sahoo.

Hi,
You will get the module wise list from:
http://www.sourceveda.com/SAPReference.htm
http://www.sourceveda.com/
Regards...

Find Triggered report name in the function module.

Hi All,
A function module is being called by many Reports say (100). Now the question is, I need to find out the Triggered report name in the function module where I can do required logic change based on the report. I cannot include an import parameter in the function module to capture the Report name, for this solution I need to change 100 reports. Is there any better way to find the Triggered report name in the Function Module?
thanks in advance.
ravi

Try system parameter SY-CPROG.

Reg:finding out the function module to manager of organization unit

Similar Messages

Maybe you are looking for