Reg: how to assign Tcodes to customised report
Hi Gurus
how to assign T-Codes to customised report
amk
Here's some SAP help for it:
http://help.sap.com/saphelp_nw70/helpdata/en/43/0f4c879f2d6f41e10000000a422035/content.htm
Jonathan
Similar Messages
-
How to assigne transaction Variant to Report
Dear Hcm Gurus:
i have to develop a report by using infoset query and also assigned transaction via se93
Report is alv-based.
so when i access report through t-code "ZHR_STAFF" and save variant /default then this variant not
outcome with desired result when i again access said mentioned t-code so kindly guide me when i access
t-code then default variant is automatically displayed.
barketHi:
Please, go to tcode SE93 and modify your transaction code adding your variant name in the field Start with variant (RSSTCD-REPO_VARI).
This way while calling tcode ZHR_STAFF the program will be automatically initialized with the specific recorded value for the specified variant.
Hope it helps,
Regards. -
HOW TO ASSIGN F4_VALUE_HELP FOR A REPORT OUTPUT FIELD???
Hi Gurus,
Can you please help me out in assigning F4_VALUE_HELP for a report output field where it is taking value as the input parameter....... If possible please help me out with some sample code ....
Regards,
Santosh
IntelligroupI don't think that you are get the F4 functionality by pressing F4, but maybe if you use a hotspot you could achieve it. Check this sample. When you click on a company code in the list, it fires the F4 help defined by the program.
report zrich_0001 .
tables: t001.
data: begin of it001 occurs 0,
bukrs type t001-bukrs,
butxt type t001-butxt,
ort01 type t001-ort01,
land1 type t001-land1,
end of it001.
start-of-selection.
select bukrs butxt ort01 land1 into table it001 from t001.
loop at it001.
format hotspot on.
write:/ it001-bukrs.
hide it001-bukrs.
format hotspot off.
write: it001-butxt.
endloop.
at line-selection.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'BUKRS'
dynprofield = 'BUKRS'
dynpprog = sy-cprog
dynpnr = sy-dynnr
value_org = 'S'
tables
value_tab = it001.
Regards,
Rich Heilman -
How to assign transaction code to report group.
hi experts,
i used report painter to create some reports and assign these reports to a report group, i want to assign a transaction code to the report group, how can i do that? hunger for your adivces, thanks a lot!!Hi Liu,
when you change an area menu, you can add transactions that launch ABAP/4 reports, Query lists or report writer's. You can use it for your purpose:
1. Enter transaction SE43 and change a Z* area menu (no matter which one, you will not change it in the end)
2. Click on "Add entry as subnode" or "Add entry at the same level" (no matter which one of them)
3. When SAP shows the popup "Add new entries", click on "Add report"
4. On the next popup, click on radio-button "Report Writer". Then you will be asked foe the code of the report group.
5. Then save, and... that's it! SAP will automatically create a transaction for the report group
6. Now you can cancel the changing of the area menu
I hope this helps. Best regards,
Alvaro -
How to assign Transaction code for report program?
All,
I have developed a custom report. I want to associate it to a transaction code. How to do it?Hi,
Please follow the steps for creating a transaction for report..
GOTO SE93
Give the transaction code.
Press create button..
Enter the short description..
Choose the radio button which says "Program and selection screen(report transaction)".
Press Enter..
Give the program name..
Remove the Selection screen "1000" if you want.
Save the transaction code..
Regards -
How to create TCode to a report program...?
<b>Hi all
How to create a transaction code to a report program,,
can any one give me in step-by-step procedure..
points will b rewarded for the exact answer....
Thanks,</b>
regards,
prashanthHi Prashanth,
Following are the steps for crating t-code for a report program:
1. Goto transaction SE93 and press create.
2. Give the transaction code to be created
3. Enter short text
4. Select the type of transaction to be created (based on ur requirements).
5. Enter screen number (1st screen to be displayed)
6. In GUI support, check all the checkbox
7. Save and activate.
You can also do this procedure by going to SE80, right click on program name->create transaction.
THanks
Vijay
PLZ Reward points if helpful -
How to assign apex_user in tabular report
Hi,
I have created a tabular report. Under report attributes / Tabular Form Element I have set the Default Type to (PL/SQL Expression of Function) and under Default (:apex_user). It looks like using :apex_user does not give me the username but if I instead of :apex_user say use sysdate it does give me the date.
thanks so very much
-ahmadiiSorry, it should be :app_user not :apex_user.
thanks. -
DUMP ERROR FOR REPORT TO ASSIGN TCODE TO ABAP QUERY
hi friends ..
i did this smallreport by difernet type but its the
error says dump_--report not found or status errror says
maximum session reached ..i think there something wrong in my submit stmt .pls let me know ...
also assign tcode to the report.
DATA:QUERYREPORT LIKE AQADEF-PGNAME,
QUERY LIKE AQADEF-QUNAME,
USERGROUP LIKE AQADEF-BGNAME,
WORKSPACE LIKE AQADEF-WSID.
query = 'zskview'.
usergroup = 'zskgrp'.
workspace = ''.
get name of queryreport
CALL FUNCTION 'RSAQ_REPORT_NAME'
EXPORTING
WORKSPACE = workspace
USERGROUP = usergroup
QUERY = query
IMPORTING
REPORTNAME = QUERYREPORT
EXCEPTIONS
OTHERS = 0.
SUBMIT (QUERYREPORT)
VIA SELECTION-SCREEN
USING SELECTION-SETS OF PROGRAM QUERYREPORT
AND RETURN.HI farukh,
1. The program u have written
is for running DYNAMIC query,
(given the query name)
2. In debugging,
chck the value of the variable
queryreport
after the FM is executed.
3. It will contain the program name (of the corersponding query)
in the following format (eg)
AQFKzskgrp======ZAMQ01========
4. Open another se38,
and CHECK whether this program exists or not!
5. If it does not,
a)either the QUERY NAME is not correct,
b) either the user group is not correct,
c) either the query is deleted / not generated .
regards,
amit m. -
How get report of all user assigned tcode & object activety wise
Dear All,
We need to get report of user assign tcode & assign tcode wise activety.
Regards
jitendra SinghHi Colleen,
but we are checked all below table related to authorization & user
1. USR02 --> User Name
2. AGR_USERS --> User Name & Role Name
3. AGR_TCODES --> Role Name & Transaction Code
4. AGR_PROF --> Role Name & Profile Name
TSTCA
Also,
5. AGR_DEFINE --> For more detail role information
USR01 contains the runtime data of the user master records
USR02 is the table containing logon information such as the password
USR03 includes the users' address information
USR04 contains users' authorizations
USR05 is the users' parameter ID table
USR09 contains user menus
USR10 is the table for user authorization profiles
USR11 contains the descriptive texts for profiles
USR12 is the user master authorization values table
USR13 contains the descriptive short texts for authorizations
USR14 contains the logon language versions per user
USR30 includes additional information for user menus
USH02, USH04, USH10 and USH12 contains Users and profile and
authorization change history data.
Tables related with authorizations objects and authorization fields are as follows:
TOBJ is the authorization objects table containing the authorization
fields for each.
TACT contains the list of standard activities authorization fields
in the system.
TACTZ is the table which defines the relationship between the
authorization objects and the activities in those objects containing
the Activity authorization field.
TSTC is the transaction code table where authorization objects
and values can be defined.
but not getting any fruit full result.
we are try to create SQVI query but not find the corresponding table.
created user against role & role against Tcode but not getting tcode against activity file value for particular user
please help me for the same -
How to assign a variable value to crystal report viewer formula with CR2008
Hi ,
I am using crystal reports 2008 and i am not able to find how to assign variable value to crystal report viewer formula.
In CR 8.5 , i used to have crystalreport1.Formulas(0) = variable1
crystalreport1.Formulas(1) = variable2
but, i don't find similar kind in crystal reports 2008.
How can i achieve the same functionality using crystal reports 2008.
Thanks in Advance
Regards,
RamnathHi,
Can i anyone help me out with this.
I am generating crystal reports in vb6 using CR 8.5 and vb6 and below is the code snippet for the same
CrystalReport1.Formulas(0) = "PrintTitle= '" & strMyTitle & "'"
CrystalReport1.Formulas(1) = "FromDate= '" & MskFromDate.Text & "'"
CrystalReport1.Formulas(2) = "ToDate= '" & MskToDate.Text & "'"
Please let me know how the same functionality can be achieved in VB.Net using Crsytal reports 2008
Any code snippet would be of great Help.
Thanks in Adnvance.
Ramnath -
How to assign custom rdf report as stylesheet PO communicator
R12 :How to assign custom rdf report as stylesheet PO communicator
Are you trying to have the table where the lines are always be the same size no matter how many lines are present?
If so, you some choices:
1) If your lines are always the same height, you might get some ideas on what to do from this article:
http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary.html
2) If your lines vary in height, then you should look into a PDF template. This will give you a pre-printed stationary look in which the drawing of boxes and lines is not affected by the data content.
3) Other less attractive options are a) making the report in XSL-FO, and b) making a bitmapped RDF report
There is currently no solution that I am aware of for a pre-printed stationary look using an RTF template in which the data lines are of variable height. -
How to get customised reports through Flexible Analysis available in PMIS
Dear Sir,
Please guide us how to get customised reports through Flexible Analysis available in PMIS.
Thanks & Regards,
PM Team[Sap Help|http://help.sap.com/erp2005_ehp_04/helpdata/en/c1/375e9c449a11d188fe0000e8322f96/frameset.htm].
Regards
Narasimhan -
How to run non-customised report from command prompt to gen trace file?
Hi
how to run non-customised report from command prompt to gen trace file?
EBS R12 RUP6.
RHEL5
rgrdsHi,
See (Note: 285497.1 - Rwrun.sh Does Not Generate Trace Output Using TRACEOPTS in Command Line) and/or (Note: 737445.1 - R12 Concurrent Requests Run Forever; rwrun Errors REP-50125) for the command you need to use.
Thanks,
Hussein -
How to Assign Image field in crystal report through Image UDF
Hi All,
I want to capture the Image UDF in crystal report. How can i assign the field in report.
Can any body help me.
regards,
Kiran KumarHi kiran Kumar,
IPost a message to SAP Businessone Reporting & Printing Forum
and also check this link
Re: SAP Business One and Crystal Reports
Image Type In Crystal Report
Regards
Jambulingam.P
Edited by: Jambulingam P on Jun 19, 2009 8:22 AM -
HOW TO ASSIGN MCSI REPORT WITH MC93
Dear Gurus
in my company, we have created on infostructure for MCSI report. the data is being populated and the report can also be seen.
But now, i want to put planned quantity/material for this infostructure through MC93, so that i can compare the actual sales with planned sales.
would you please advice me how to assign the infosturcuture with MC93 to put the planned quantity/target.
thank you
shabbir
Edited by: ashabbir on May 25, 2010 11:08 AMHello Shabbir
1) First create 'PLANNING hierarchy' using T code MC61. Specify the custom infostructure and do not enter any characteristics in the next scree. In the next screen enter the pan data level by level for all characteristics.
2) Now get into MC93 to create planning. Enter your custom infostructure in the opening screen for 'Planning Type'. Enter the characteristics as needed and click enter. Enter the plan data in the next screen and save the version.
3) Now use MCSI with your custom infostructure and when the standard Analysis: Basic list is displayed, go via menu option Edit/Comparisons/Planned/Actual to see the comparison.
Hope this helps.
Maybe you are looking for
-
My Canon EOS is no longer recognized by iPhoto.
I have been using my Canon EOS with my iMac OSX Version 10.8.5 and recently iPhoto stopped recognizing it. I am unable to download photos. I have to copy them from the memory card. At the same time, Dropbox is recognizing them and a window pops up wh
-
Perl adpreclone.pl dbTier errors out with RC-50013
Hi all, Am performing a clone of an 11.5.10.2 system running on Redhat linux 3.0. When i run perl adcfgclone.pl dbTier,it errors out with the following error whenever it gets to 16%. AutoConfig is exiting with status 1476 RC-50013: Fatal: Failed to i
-
Change view in document area from CSS
I don't know how my Design document area changed from WYSIWYG to CSS. I don't know what I did to have this happen. How do I change it back? Thanks
-
Create buttons in the workbook?
Hello Experts, Any information on how to create buttons to point to workbooks. These bottons correspond to different WorkBooks (not worksheets within workbook ) button1: WorkBook1 button2 : WorkBook2. Thanks, Sweatha
-
I can't upgrade my cs5.5 to cs6 ??
hello guys my bad luck i bought cs5.5 PP in Jan this year , my Q? is i bought it by amazon in us. store but now i'm living in kuwait for some work , can i upgrade it from here or not ? i try to checkout but its give me this msg Error in Your Order