Reg Pop up in adobe form

hi , Iam raising an error message using
xfa.host.messageBox("error message");
when i get the error message pop up...it has title..WARNING :JAVASCRIPT WINDOW.
But I want to remove this  title....
So any idea ...hiow to remove this?
or any other procedure to raise POPUP with our own title
regards
Arjun

Hi Arjun,
You can use the following JavaScript to get UserDefined Title or password protect popup box (i.e. popup box input field becomes password field) for the Pop-Up Box.
Response Box i.e app.response Method
It takes the following Input Arguments:
1. Argument   :  Description
2. cQuestion  : Main Response Box text
3. cTitle         : Window Title of Response Box
4. cDefault     :  Initial value of input text box, also value returned if no changes are made
5. bPassword : Causes text entered into input box to be obscured by asterisks (*)
6. cLabel       : Short text string placed in front of input box
Sample Code:
var cRtn = app.response ();
NOTE: In the sample code if you donot add the cLabel then the input of the popup box is simple text and it will not become password field.
Please review the Acrobat site:
http://www.acrobatusers.com/tech_corners/javascript_corner/tips/2006/popup_windows_part2/
Regards
Pradeep Goli

Similar Messages

  • Reg Control Parameters of Adobe forms

    Hi,
       I am have a issue with adobe forms, the purchase order in me22n changing the values and saving the PO has to go as an PDF attachment to the Vendor mail . But it is not happening but the PO is Processed sucessfully. The vendor mail is checked and it is correct and the type of medium to the Output is External Send which is for the email. The form is copy of  Standard Adobe form and the program is also std copy of SAPFM06P. In the driver program is any coding is required for the controlling parameters of form so that mail will happens.
        Plz help me out in this issue.
    Regards,
    Narasimha

    Hi Narsimha,
    I think the standard program may not have functionality for sending mail .
    Check for nast-nacha value, see the code below
    CASE gs_nast-nacha.
        WHEN gc_nacha-external_send.
    *     Proccess communication type
          cs_outputparams-getpdf = gc_true.
          cv_device              = gc_device-email.
        WHEN gc_nacha-printer.
    *     Print
          cv_device                    = gc_device-printer.
        WHEN gc_nacha-fax.
    *     Fax
          cs_outputparams-getpdf       = gc_true.
          cv_device                    = gc_device-fax.
      ENDCASE.
    After fp_jobclose write these lines
    CASE lv_device.
        WHEN gc_device-fax
          OR gc_device-email.
    *  Code to send PDF file as mail attachment should be written within these lines
          PERFORM send_data using lv_pdffile.
      ENDCASE.
    The Driver Pr
    >
    Narasimhulu wrote:
    > Hi,
    >    I am have a issue with adobe forms, the purchase order in me22n changing the values and saving the PO has to go as an PDF attachment to the Vendor mail . But it is not happening but the PO is Processed sucessfully. The vendor mail is checked and it is correct and the type of medium to the Output is External Send which is for the email. The form is copy of  Standard Adobe form and the program is also std copy of SAPFM06P. In the driver program is any coding is required for the controlling parameters of form so that mail will happens.
    >
    >     Plz help me out in this issue.
    >
    >
    > Regards,
    > Narasimha

  • Reg : Offline Process In Adobe Forms

    Hi All,
    I just to know want to know how the off line process work in adobe forms, with some real time examples and also i want to know how the data has been transformed to Sap when the user fills the form in off line. Is it possible to import all the paper works to adobe forms as like in the One Note Concepts.Please Clarify me on this concepts as am new to Adobe Forms.

    check here
    https://www.sdn.sap.com/irj/sdn/adobe

  • Reg. barcode printing in adobe form

    Hi experts,
          I want to display barcode in adobe form.
    I am using code128 standard barcode.
    My requirement is to display the humanreadable format in barcode(text that displays with barcode) with 16 font size and
    it should have format DTAPxxxxxxxxxx.i.e DTAP should be the prefix and remaining should be dynamic.
    However i didnt find any option in adobe form to the same.
    Request you all to tell me the solution for this problem..
    Thanks in advance,
    Swathi..

    Hi,
    Declare a variable of character type and concatenate DTAP and Bar code value into that variable.
    Later print that in required bar code format.
    Try this.

  • Reg: Label printing in Adobe forms

    Hi All,
    I am working on Adobe forms for printing labels. For that I have created 10 content areas on the master page and properly aligned all the fields such a way that they fit into the content area exactly.
    I am having two subforms with names subform1 & subform2. I have wrapped all fields in subform2 and placed it in the subform1.
    Properties of subform1 : I have set it as flowed and set after as 'Go to next content area'
    Properties of subform2 : I have set it as positioned and set after as 'Continue filling parent'
    The problem here is when I am trying to print 10 labels, all the labels are printed on one page and another empty page is getting displayed. Please provide me some hit for avoiding this blank page. [The data in the labels are exactly fitting into the content area]
    let me know if you eed any other information.
    Thanks,
    Raveendra.P

    Hi Gold,
    I am not very sure...but with the easy solution you gave for my problem...I think one label will be printed per page. Please correct me if I am wrong.
    I think when we use subform..we will set it as flowed and when data exceeds it moves to next page
    Also give me some hint why empty page is getting displayed in my case.
    Edited by: ravee on Jan 12, 2010 1:56 PM

  • Reg : Heading display in Adobe Forms

    I have Created an appln using Adobe Forms.
    In Body Pages Data is displayed with Heading. I have given Flowed Option for mulitple pages display.I want the Heading
    to be reflected in all the body pages.
    I  don't want to display it in Master Page bcos I am displaying some text in first body pages continued by the table.
    Any option is there for getting Heading in all the Table display pages only. Thnks in advance...

    Hi
        Go to the Table in the body page  -> then select the Header row only -> right click on the header  row -> Go to Palletes -> Object -> Under pagination tab -> Check the check box Include Header Row in Subsequent Pages .
    Then save and active it. Try this one. I think it will solve your problem.
    Thanks
    Sriiiiiiiiiiii(Srikanth)

  • REG: Hiding Objects in adobe forms

    Dear Experts,
    I am working on interactive forms. I have some queries which are as following:
    - I am designing an adobe template with a subform to be diplayed when required else not. I tried the visibility option but it seems it has to be done using Scripts.
    - In the scripts editor, I am using a script to make a particular sub form invisible:
    xfa.form.Vn_DataSource.pageSet.Page1.SubForm_AlertStamp.presence="Hide"
    -This is giving me error like:
    accessor-unkown if I keep it at datasource and run it at the initialize.
    -If I keep the code at the particular subform and run it at initialize, it gives me an error like:
    Invalid enumerated value: hide
    I am unable to understand where to keep my code or whether I need to do some modifications in the script?
    -I am using FormCalc.
    Also, Is it possible to have a attribute of type integer and call it in the script to check if it is 0, I need to display the subform else not.
    I hope I am clear with my queries. Helpful answers will be appreciated.
    Thanks in advance,
    Regards,
    Gaurav.

    Hi Reema,
    Thanks for your reply, but when I am using the following code:
    xfa.form.Vn_DataSource.pageSet.Page1.SubForm_AlertStamp.presence="hidden"
    It's giving me an error like:
    Script failed: Accessor xfa.form.Vn_DataSource.pageSet.Page1.SubForm_AlertStamp.presence is unknown.
    I am writing this code at the node initialize and I tried writing it at the sub form also. Can you please suggest me why I am getting this error? Is that a code error or I am writing it at a wrong place?
    Thanks in advance
    Warm Regards,
    Gaurav

  • Reg shifting field in Adobe Forms

    Hi All-
          I am working on Adobe.I have a requirement that at top I will have a table and after that some text will come.
    when i am fixing position of downword Text and the no of rows increasing in Table,its overlap on lower level data.
    plese provide me solution for that.
    Thanks-
    Ashutosh

    As stated above, you will have to implement subforms. this can get a little tricky if you have content you want positioned on a form along side flowed content.
    Generally, my PDF is a combination of positioned and flowed subforms because when you make a subform flowed, it will squish your fields/data all together.
    There are 2 types of flowing forms - western text and top to bottom. Top to Bottom will squeeze your fields right underneath each other.
    Western Text will wrap your fields from left to right.
    If you go this route, a tip is to make use of spacing options in your Layout to force space between your fields.

  • Reg : Fillable attribute in adobe form

    Hi all,
    i would like to have a clarification ..
    when i set
    fp_docparams-FILLABLE = 'X'. i am not getting the pdf simply i m getting a error message "ADS : Start time ...."
    and when i set
    fp_docparams-FILLABLE = 'N' i m getting the pdf and able to enter the value in the text field .. but not able to save..
    should i apply any SAP note reg this.. If anybody knows plz let me know..
    Rgrds.

    Please ignore this Question.. this already runs in another thread..

  • How to avoid Print pop-up while using a Adobe form.

    Hi Experts,
    I am calling a adobe form from a BAPI.I am using the following function modules FP_FUNCTION_MODULE_NAME and CALL FUNCTION fun_name. But when I try to execute the BAPI a print preview pop-up appears.Please let me know the steps to avoid the print preview pop-up while execution of the BAPI.
    Thanks in Advance.
    Warm Regards,
    Arun.

    Hello
    I don´t understand the connection between BAPI and the printing program. I guess - at least that is what I have done - is to generate the form when creating and invoice or something, then I could understand.
    When you ask for GETPDF = 'X' then you always get the PDF data back and not the popup.
    Or if you would like to display the print preview without a print settings popup. Or variants...
    FUNCTION ZPDF_SET_OUTPUT_MODE.
    *"*"Lokální rozhraní:
    *"  CHANGING
    *"     VALUE(FP_OUTPUTPARAMS) TYPE  SFPOUTPUTPARAMS
    fp_outputparams-dest     = 'ZPDF'.
    fp_outputparams-nodialog = 'X'.
    fp_outputparams-preview  = 'X'.
    ENDFUNCTION.
    regards Otto

  • REG : ADOBE FORM IN WEB DYNPRO

    HI,
    I have a req to create a time sheet in web dynpro thru ADOBE.
    I created a view and in the view..i used INTERACTIVE FORM UI element and then crated an interface also.
    now I am in adobe form.
    when I searched the  in ADOBE ,i found the TIME SHEET provided by sap.
    now i want to make use of that adobe form in my web dynpro component.
    my question i s:
    how to map the exising ADOBE TIME SHEET  fields to my web dynpro component.
    do i need to create the nodes and attributes for all the   elements in CONTEXT.
    PLZ HELP ME.
    regards
    arjun

    Hi
    Check out these links-
    https://www.sdn.sap.com/irj/sdn/adobe
    https://www.sdn.sap.com/irj/sdn/adobe?rid=/webcontent/uuid/24b9e126-0b01-0010-e098-f46384fad9f3
    Regards
    Lekha

  • Reg: Adobe forms

    Hi All,
    I am beginner to Adobe forms. I am just doing a simple example for displaying a value on the form. But it is giving error "Adobe document services error: SOAP Runtime Exception: CSoapExceptionTransport".
    Thanks,
    Ravee

    Hi
    Check with Basis people regarding ADS Configuration. They will solve your problem.
    Also go through this link :
    Adobe document service error: SOAP Runtime Exception
    With Regards
    Nikunj Shah

  • Reg : Condtions in Adobe Forms

    Hi all
    How to check Conditions in Adobe Form
    In Having 1 Input -  name As Value1
    Also Im created 2 textbox in my layout Textbox1 and Textbox2
    If Given Value1 is 1  i want to display Textbox1 and IF value1 is 2  want to display only Textbox2
    How to check conditions ...already i hav used Form calc .. But it is not working
    Kindly Help
    Thanks
    Sri

    hi,
    since you have the Billing table in the form , so i guess the best solution will be to use FORMCALC at the form level.
    Using FORMCALC you can access this table at the initialization stage -> now initiate a counter -> use DO_WHILE loop and check the table for empty values -> this counter keeps incrementing till the Table values are empty.
    Now each time inside the loop pass this counter to the FIRST Row of the table.
    For better understanding search for FORMCALC reference.
    Ita a pretty easy language to understand and developer friendly.
    http://help.adobe.com/en_US/livecycle/es/FormCalc.pdf
    ags.

  • Reg: Adobe form printing

    Hi Experts,
    I have requirement in Adobe forms. In that i am using Text modules to display the data in multiple languages. But text module which i am using should be repeated based on input given.
    for example: if input is one then the text module should be displayed once.
                         if input is 2 then the same text module should be displayed twice
                         if input is 3 then the same text module should be displayed thrice.
    Can anybody please suggest me.
    Regards:
    TMR.
    Moderator message: wrong forum, please post again in Adobe Interactive Forms.
    locked by: Thomas Zloch on Sep 24, 2010 11:55 AM

    Hi,
    Declare a variable of character type and concatenate DTAP and Bar code value into that variable.
    Later print that in required bar code format.
    Try this.

  • Reg: Arrow to navigate different contracts in adobe form

    Hi,
    When there are multiple contracts, multiple reports are generated and there is an arrow to navigate between the contracts  in top of PDF form how can we add a counter to show what that the user is viewing contract 1 of 6
    How can we handle this.
    Regards,

    Thanks for the reply
    No.. i'm not looking for the page numbers.
    I have the 2 contract no..
    For eg: for 1st contract no has the 4 pages of details and 2nd contract no has the 2 pages of details..
    now i want to display in the top of 1st page of contract no:1 is 1of 2 and the top of 1st page of contract no:2 is 2 of 2..etc n of n
    in adobe form, we have the navigation keys in the top for next '>'  '>|' or for previous '<'  '|<'.
    Regards,

Maybe you are looking for

  • Why will Firefox allow me to have multiple tabs available, but not allow me to switch between tabs, and can only look at a new tab by closing the previous one?

    Whenever I open a new tab, it appears on the tab bar where it should, but if I click on it nothing happens, the tab won't open, and I can't switch between multiple tabs. The only way to get to a new tab is to close the one I am currently on, and even

  • How do I get an applet to work on a web page?

    I made an applet, but on my computer it only works when I have the JRE installed, and not when it isn't installed. Currently, it doesn't work on the website I put it on unless the computer accessing the website has the JRE installed. Is there any way

  • Error log - Please help

    Everything compiled ok, when I deployed in J2EE, I got this error log. What went wrong? Compilation failed.      at com.sun.ejb.codegen.GeneratorDriver.compileClasses(GeneratorDriver.java:232)      at com.sun.ejb.codegen.GeneratorDriver.preDeploy(Gen

  • Reverse Foreign Currency valuation

    Hello, Does Anyone know how to reverse a foreign currency valuation. I basically ran a foreign currency valuation with a wrong date and the valuation posted some data which is junk. I need to reverse this data. Is there any way of reversing a Foreign

  • Data no getting populated from input help to target field

    Hi , I have made a input help for a field. and have used the following code to populte the data into the input help.I am having the data displayed but the data doesnot get populated on selection. CASE cs_dropdownlb_data-fieldname.       WHEN 'ZZSALSP