Reg : Fillable attribute in adobe form

Hi all,
i would like to have a clarification ..
when i set
fp_docparams-FILLABLE = 'X'. i am not getting the pdf simply i m getting a error message "ADS : Start time ...."
and when i set
fp_docparams-FILLABLE = 'N' i m getting the pdf and able to enter the value in the text field .. but not able to save..
should i apply any SAP note reg this.. If anybody knows plz let me know..
Rgrds.

Please ignore this Question.. this already runs in another thread..

Similar Messages

Reg Control Parameters of Adobe forms

Hi,
   I am have a issue with adobe forms, the purchase order in me22n changing the values and saving the PO has to go as an PDF attachment to the Vendor mail . But it is not happening but the PO is Processed sucessfully. The vendor mail is checked and it is correct and the type of medium to the Output is External Send which is for the email. The form is copy of Standard Adobe form and the program is also std copy of SAPFM06P. In the driver program is any coding is required for the controlling parameters of form so that mail will happens.
    Plz help me out in this issue.
Regards,
Narasimha

Hi Narsimha,
I think the standard program may not have functionality for sending mail .
Check for nast-nacha value, see the code below
CASE gs_nast-nacha.
    WHEN gc_nacha-external_send.
*     Proccess communication type
      cs_outputparams-getpdf = gc_true.
      cv_device              = gc_device-email.
    WHEN gc_nacha-printer.
*     Print
      cv_device                    = gc_device-printer.
    WHEN gc_nacha-fax.
*     Fax
      cs_outputparams-getpdf       = gc_true.
      cv_device                    = gc_device-fax.
ENDCASE.
After fp_jobclose write these lines
CASE lv_device.
    WHEN gc_device-fax
      OR gc_device-email.
* Code to send PDF file as mail attachment should be written within these lines
      PERFORM send_data using lv_pdffile.
ENDCASE.
The Driver Pr
>
Narasimhulu wrote:
> Hi,
>    I am have a issue with adobe forms, the purchase order in me22n changing the values and saving the PO has to go as an PDF attachment to the Vendor mail . But it is not happening but the PO is Processed sucessfully. The vendor mail is checked and it is correct and the type of medium to the Output is External Send which is for the email. The form is copy of Standard Adobe form and the program is also std copy of SAPFM06P. In the driver program is any coding is required for the controlling parameters of form so that mail will happens.
>
>     Plz help me out in this issue.
>
>
> Regards,
> Narasimha

Reg : Offline Process In Adobe Forms

Hi All,
I just to know want to know how the off line process work in adobe forms, with some real time examples and also i want to know how the data has been transformed to Sap when the user fills the form in off line. Is it possible to import all the paper works to adobe forms as like in the One Note Concepts.Please Clarify me on this concepts as am new to Adobe Forms.

check here
https://www.sdn.sap.com/irj/sdn/adobe

Reg. barcode printing in adobe form

Hi experts,
I want to display barcode in adobe form.
I am using code128 standard barcode.
My requirement is to display the humanreadable format in barcode(text that displays with barcode) with 16 font size and
it should have format DTAPxxxxxxxxxx.i.e DTAP should be the prefix and remaining should be dynamic.
However i didnt find any option in adobe form to the same.
Request you all to tell me the solution for this problem..
Thanks in advance,
Swathi..

Hi,
Declare a variable of character type and concatenate DTAP and Bar code value into that variable.
Later print that in required bar code format.
Try this.

Reg: Label printing in Adobe forms

Hi All,
I am working on Adobe forms for printing labels. For that I have created 10 content areas on the master page and properly aligned all the fields such a way that they fit into the content area exactly.
I am having two subforms with names subform1 & subform2. I have wrapped all fields in subform2 and placed it in the subform1.
Properties of subform1 : I have set it as flowed and set after as 'Go to next content area'
Properties of subform2 : I have set it as positioned and set after as 'Continue filling parent'
The problem here is when I am trying to print 10 labels, all the labels are printed on one page and another empty page is getting displayed. Please provide me some hit for avoiding this blank page. [The data in the labels are exactly fitting into the content area]
let me know if you eed any other information.
Thanks,
Raveendra.P

Hi Gold,
I am not very sure...but with the easy solution you gave for my problem...I think one label will be printed per page. Please correct me if I am wrong.
I think when we use subform..we will set it as flowed and when data exceeds it moves to next page
Also give me some hint why empty page is getting displayed in my case.
Edited by: ravee on Jan 12, 2010 1:56 PM

Reg : Heading display in Adobe Forms

I have Created an appln using Adobe Forms.
In Body Pages Data is displayed with Heading. I have given Flowed Option for mulitple pages display.I want the Heading
to be reflected in all the body pages.
I don't want to display it in Master Page bcos I am displaying some text in first body pages continued by the table.
Any option is there for getting Heading in all the Table display pages only. Thnks in advance...

Hi
Go to the Table in the body page -> then select the Header row only -> right click on the header row -> Go to Palletes -> Object -> Under pagination tab -> Check the check box Include Header Row in Subsequent Pages .
Then save and active it. Try this one. I think it will solve your problem.
Thanks
Sriiiiiiiiiiii(Srikanth)

REG: Hiding Objects in adobe forms

Dear Experts,
I am working on interactive forms. I have some queries which are as following:
- I am designing an adobe template with a subform to be diplayed when required else not. I tried the visibility option but it seems it has to be done using Scripts.
- In the scripts editor, I am using a script to make a particular sub form invisible:
xfa.form.Vn_DataSource.pageSet.Page1.SubForm_AlertStamp.presence="Hide"
-This is giving me error like:
accessor-unkown if I keep it at datasource and run it at the initialize.
-If I keep the code at the particular subform and run it at initialize, it gives me an error like:
Invalid enumerated value: hide
I am unable to understand where to keep my code or whether I need to do some modifications in the script?
-I am using FormCalc.
Also, Is it possible to have a attribute of type integer and call it in the script to check if it is 0, I need to display the subform else not.
I hope I am clear with my queries. Helpful answers will be appreciated.
Thanks in advance,
Regards,
Gaurav.

Hi Reema,
Thanks for your reply, but when I am using the following code:
xfa.form.Vn_DataSource.pageSet.Page1.SubForm_AlertStamp.presence="hidden"
It's giving me an error like:
Script failed: Accessor xfa.form.Vn_DataSource.pageSet.Page1.SubForm_AlertStamp.presence is unknown.
I am writing this code at the node initialize and I tried writing it at the sub form also. Can you please suggest me why I am getting this error? Is that a code error or I am writing it at a wrong place?
Thanks in advance
Warm Regards,
Gaurav

Reg shifting field in Adobe Forms

Hi All-
I am working on Adobe.I have a requirement that at top I will have a table and after that some text will come.
when i am fixing position of downword Text and the no of rows increasing in Table,its overlap on lower level data.
plese provide me solution for that.
Thanks-
Ashutosh

As stated above, you will have to implement subforms. this can get a little tricky if you have content you want positioned on a form along side flowed content.
Generally, my PDF is a combination of positioned and flowed subforms because when you make a subform flowed, it will squish your fields/data all together.
There are 2 types of flowing forms - western text and top to bottom. Top to Bottom will squeeze your fields right underneath each other.
Western Text will wrap your fields from left to right.
If you go this route, a tip is to make use of spacing options in your Layout to force space between your fields.

Reg Pop up in adobe form

hi , Iam raising an error message using
xfa.host.messageBox("error message");
when i get the error message pop up...it has title..WARNING :JAVASCRIPT WINDOW.
But I want to remove this title....
So any idea ...hiow to remove this?
or any other procedure to raise POPUP with our own title
regards
Arjun

Hi Arjun,
You can use the following JavaScript to get UserDefined Title or password protect popup box (i.e. popup box input field becomes password field) for the Pop-Up Box.
Response Box i.e app.response Method
It takes the following Input Arguments:
1. Argument   : Description
2. cQuestion : Main Response Box text
3. cTitle         : Window Title of Response Box
4. cDefault     : Initial value of input text box, also value returned if no changes are made
5. bPassword : Causes text entered into input box to be obscured by asterisks (*)
6. cLabel       : Short text string placed in front of input box
Sample Code:
var cRtn = app.response ();
NOTE: In the sample code if you donot add the cLabel then the input of the popup box is simple text and it will not become password field.
Please review the Acrobat site:
http://www.acrobatusers.com/tech_corners/javascript_corner/tips/2006/popup_windows_part2/
Regards
Pradeep Goli

REG : ADOBE FORM IN WEB DYNPRO

HI,
I have a req to create a time sheet in web dynpro thru ADOBE.
I created a view and in the view..i used INTERACTIVE FORM UI element and then crated an interface also.
now I am in adobe form.
when I searched the in ADOBE ,i found the TIME SHEET provided by sap.
now i want to make use of that adobe form in my web dynpro component.
my question i s:
how to map the exising ADOBE TIME SHEET fields to my web dynpro component.
do i need to create the nodes and attributes for all the elements in CONTEXT.
PLZ HELP ME.
regards
arjun

Hi
Check out these links-
https://www.sdn.sap.com/irj/sdn/adobe
https://www.sdn.sap.com/irj/sdn/adobe?rid=/webcontent/uuid/24b9e126-0b01-0010-e098-f46384fad9f3
Regards
Lekha

HT4356 Fillable pdf in Adobe Acrobat Professional X but when I try to use the Airprint feature the form print minus the field data, have anyone been able to resolve this issue?

I have developed a fillable pdf in Adobe Acrobat Professional X but when I try to use the Airprint feature the form print minus the field data, have anyone been able to resolve this issue?

Hi,
I had a similar problem and found help for it. Go to the "Advanced" menu and select Extend features in Adobe Reader. That will enable rights which may resolve your problem. If that doesn't work, there is a really helpful guy in here, Robert Levine. You may want to ask him directly.
Good Luck

How do you share a form fillable pdf in adobe connect?

How do you share a form fillable pdf in adobe connect? ItI used to do it like I would share any other document but now it says "could not process document for viewing." Anyone know what cahnged and how to fix it?

I hope its not preview.

Hide attributes in adobe interactive form.

Hi All,
Can anybody help how to how to hide/show attributes in adobe interactive forms?
The scenario is like this:
In data view there are 2 attributes a1,a2. Currently i am showing both the attributes in the form. But only that attribute will be shown which will contain data, other will remain invisible. how to do it?
Thanks in advance,
tubai123

hi,
you can go for FormCalc Script in Script Editor.
In the initialise event of both the fields , write this Script :
if (HasValue($)) then
$.presence = "Visible"
else
$.presence = "Hidden"
endif
This will hide your fields with no data.

Fillable in Stand Alone Adobe Form

Hi all,
I am using stand alone adobe form. It is a interactive form.
My problem is to make it interactive i need to make FILLABLE = 'X'. But as it is stand alone i am not able to set it to 'X' .
Import parameter for FM is
/1BCDWB/DOCPARAMS
This structure contain FILLABLE. It remain blank initially.
Is there any way to make it default in print parameter of FM.
Thanks in advance.

Hi ,
Go through site
saptechnical -> Adobeforms.
OR Try this code,
DATA:
fp_docparams TYPE sfpdocparams,
CALL FUNCTION lf_fm_name
EXPORTING
/1bcdwb/docparams = fp_docparams
once you pass fp_docparams to funtion module it will be assign as a fillable
Your query will be solved.
Regards,
Sandeep

Fillable adobe form

hi i´ve the next problem i need an adobe form and it must be fillable online when a user open the enterprise portal may fill the pdf form but i dont have idea how do it any sugestion about how do it thaks or if exist a tutorial to do it i will be thankful with your replys thaks

Welcome to SDN.
Refer this link - http://****************/Tutorials/AdobeForms/index.htm

Reg : Fillable attribute in adobe form

Similar Messages

Maybe you are looking for