Reg:SAP_COLLECTOR_FOR_PERFMONITOR

Hi Guru's,
The SAP_COLLECTOR_FOR_PERFMONITOR Background job is running through Client: 000 User: DDIC. It is getting canceled when starting the step. Please,help me reg.this issue.
Regards,
Deve

Hi Deve,
08/19/2008 04:39:05 Logon of user ADMINJOBS in client 000 failed when starting a step 00 560
Here you can see the job fails because the logon for the user ADMINJOBS fails in client 000.Please check why the user is not able to login to 000 by using the t-code su01.
The reasons can be the user may be locked
Password may be expired
User ADMINJOBS may not exist any more in the client 000.
Resolve this you job will run successfully.
Normally these jobs should run under system user to avoid these type of issues.
Regards
Ashok

Similar Messages

Mail can't send email from 123-reg accounts

Hi all,
I've got an issue with Mac Mail can’t send email from 123-reg accounts.
I know there is a lot of articles on simular matters and some I have tried out with no luck, others are just speaking a whole other language.
Any help would be greatly recived, here's my situation below:
Running a iMac 2.8GHz Intel Core i5 on OS X 10.8.3
I’m using 3 accounts on Macs Mail client, one is my iCloud account that is working fine and the other two are my 123-reg accounts that I use for business purposes. I’ve been working like this for a couple of years now and about 6 months ago I upgrade my operating system from Snow Leopard to Mountain Lion.
2 or 3 months ago I randomly got a problem where I was unable to send any emails from my 123-reg account, I could only receive emails. I checked my settings and they were all correct and unchanged so I attempted to delete them and recreate the account but with no such luck.
I then decided to check if it was a problem at 123-regs end and attempted to log into web mail. This worked and was able to both send and receive emails so eliminated that possibility.
I also have these accounts set up on my iPhone, so checked if there was any issues and everything was working fine. I then checked my iphone details and made sure the same was on my desktop and still no such luck.
I’ve tried out some of the articles I’ve found on here (the ones written in plain English) still no results. I’m not very IT illiterate and just wondered if anyone else has got any ideas, whether there is something specific with 123-reg accounts and Mac Mail?
Many thanks.

Thanks
I just had another hunt around looking at posts and discovered that it was because I recently changed to BT Infinity and they had a block on.
I didn't even think to question the ISP.
https://discussions.apple.com/message/21173608#21173608

Reg: Message and BPM

Hi
I'm having a scenario where i use a JDBC adapter to extract data from a DB. As a result of the query say, 10 rows are returned as message to XI server. I have a transformation (BPM) set and the receiver(target system) is a file. When i open the file to see its contents i can see only the first record been transfered. The mapping part used for the transformation node is having IF condition. But all the fetched records satisfies the conditions in the mapping.
Pls let me know the corrective step.
reg: Prabhu

Hi,
1)Check the input XML i.e all 10 records are coming into XI . This you can check in SXMB_MONI
2) Then you can test the mapping in the integration Reposiotry .. So now you can get if any mapping problem. For this , check is the occurence of target strcuture is 1..n or 0.n
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
3) If mapping is correct , then check the RWB->Message Monitoring->Message Display Tool and check the payload.
4) If this is correct, then check the File COntent Conversion of the Receiver File Adapter.
Hope this helps,
Regards,
Moorthy

SAP_COLLECTOR_FOR_PERFMONITOR getting cancelled

Dear All,
The job SAP_COLLECTOR_FOR_PERFMONITOR is getting cancelled daily at 7.00 AM. It is scheduled to run hourly. All other times it finishes succesfully. But only 1 time at 7 it gets cancelled. The job log is :-
Date       Time     Message text                                                Message class Message no. Message type
15.11.2007 07:00:17 Job started                                                      00           516          S
15.11.2007 07:00:17 Step 001 started (program RSCOLL00, variant , user ID DDIC)      00           550          S
15.11.2007 07:00:38 ABAP/4 processor: CONNE_IMPORT_WRONG_COMP_TYPE                   00           671          A
15.11.2007 07:00:38 Job cancelled                                                    00           518          A
the Dump is pasted below:-
                                                                                ShrtText
Error when attempting to IMPORT object "HIST2".
What happened?
Error in ABAP application program.
The current ABAP program "RSORAT4M" had to be terminated because one of the
    statements could not be executed.
This is probably due to an error in the ABAP program.
When attempting to import data, it was discovered that the data
    type of the stored data was not the same as that specified in the
    program.
Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR',
     was neither
    caught nor passed along using a RAISING clause, in the procedure
     "AKT_DAY_HIST2" "(FORM)"
Since the caller of the procedure could not have expected this exception
     to occur, the running program was terminated.
    The reason for the exception is:
    When importing the object "HIST2", the component no. 8 in the
    dataset has a different type from the corresponding component
    of the target object in the program "RSORAT4M".
The data type is "I" in the dataset, but "P" in the program.
How to correct the error
    Try to find out why the type of the object is different.
    There are several possible reasons:
--- In the ABAP Dictionary, the type of the imported
field has changed. Make sure that the type of the imported
field matches the length of the Dictionary field.
|   If the data could not be restored from another source, this data
    |   must be read with the "old" structure, then converted and exported
    |   back with the new structure, so that future IMPORTs always work
    |   with the new structure.
    |
--- A new program version is active, and it no longer matches the
        dataset. Try to solve the error by generating the program "RSORAT4M" again
        as follows:
        In the SAP System, choose the transaction SE38. Enter the program
        name "RSORAT4M". Then choose the "Activate" function.
===
It is saying
The data type is "I" in the dataset, but "P" in the program.
But it runs 23 times correctly except 1 time.
Can Anyone help me in this please
Thanks
Tajinder

Hi,
Can u please suggest me what will be the monikey here. below is the dump for that
154   DATA: FLAG VALUE ' '.
155   LOOP AT HIST2.
156     IF HIST2-DATE = DATE. DELETE HIST2. FLAG = '*'. ENDIF.
157   ENDLOOP.
158   IF FLAG NE SPACE. SUBTRACT 1 FROM LOGBUCH-ANZDAYS. ENDIF.
159 ENDFORM.
160
161 FORM AKT_DAY_HIST2.                    " Aktualisiere Tage-Historie
162   PERFORM PREPARE_MONIKEY USING 36.    " Lese Historie
>>>>   IMPORT HIST2 FROM DATABASE MONI(DB) ID MONIKEY.
164   IF SY-SUBRC <> 0.
165     REFRESH HIST2. CLEAR HIST2.
166     PERFORM LOGBUCH_INIT USING 1.
167     PERFORM TRANSFORM_ALL_HISTORIES.   " Strukturaenderung fuer Dynami
168     PERFORM PREPARE_MONIKEY USING 36.    " Lese Historie
169     IMPORT HIST2 FROM DATABASE MONI(DB) ID MONIKEY.
170   ENDIF.
171   READ TABLE HIST2 INDEX 1.
172   IF SY-SUBRC <> 0.
173     REFRESH HIST2. CLEAR HIST2.
174     PERFORM LOGBUCH_INIT USING 1.
175   ENDIF.
176   PERFORM DELETE_AKT_DAY_HIST2.        " Delete aktuellen Tag
177   LOOP AT HIST2_DAY.                   " Füge neue Analyse an
178     MOVE-CORRESPONDING HIST2_DAY TO HIST2.
179     APPEND HIST2.
180   ENDLOOP.
181   ADD 1 TO LOGBUCH-ANZDAYS.
182   MOVE DATE TO LOGBUCH-LASTDAY.
Thanks
tajinder

Reg: How to Stop Polling of JDBC Adapter without Scheduling the adapter

Dear Gurus,
Here I am having one requirement. My clients wants to send data from JDBC adapter (ORcale System table) to R3 system via RFC.
His Requirement::
1. He is not telling the time of data flow from Oracle server so that based on that we can schedule the adapter in the Communication Channel monitoring (Availablitiy Time Planning) or Else we can Schedule by deciding the setting of the polling interval time.
2. He is telling that When ever he waants to send the data he will place one dummy file in the File Adapter FTP location so that it will became an Indication for u to poll the jdbc adapter and to transfer the data to R3.
3. Untill he keeps the file or gives indication he doesn;t want to communicate with Oracle server due to some security and it s a most important data base he doesn't want to disturb that Oracle Server as so many business are running on that.....
We Proposed::
1. Atleast you need to tell the scheduling time or poll interval time so that we can schedule our adapter.
but he s not accepting for this
2. Atleast U need to give access for Data base to enter one more extra field like STATUS CODE so that we will add one number and we keep on Update in the Update table and based on that Update table statement it will poll.
but he s not even accepting for this
3. Finally we prposed that to create another table in the Oracle SYstem as Dulplicate Table which is similar to Standard Orginal table when ever he wants to pick the data please keep that data in this Duplicate TABle so that JDBC adapter will pick the data from thsi TABLE instead of picking the data from that standard table so that it will not effect any standard table data in the table.
but he s not even accepting for this
We have done some R & D:::
1. WE approached even through BPM and via switch conditions is one scenario
   FILE RECEIVE >SWITCH CONDITION> RECEIVE AND SEND or else EXIT
2. Using correlation in anotehr scenario means correlating File adapter and JDBC and based on one dynamica value it will goes to SEND STEP ( RECE IVE --> RECEIVE --> SEND STEPS )
Even though we know this...concept that...we jsut tried::
In BPM we can control the flow in XI 3.0 but we cannot Stop the Polling of JDBC adapter at backend because one the data comes from FILE adapter it will keep on HOLD untill it receives the JDBC from Oracle then based on the condition or Correlation it will goes futher SEND step means after that file adapter is picking file or not ...what ever it may be JDBC will polls at backend and brings that data to BPM"
Hence sugest me How to Stop Polling of JDBC Adapter without Scheduling the adapter or else using STATUS CODE Update statements in JDBC Tables
Regards:
Amar Srinivas Eli

Hi! All,
Finally I decided to do the scenario in two steps:
1: FILE REQ --> JDBC REQ -->JDBC RES --> FILE RECV
2: FILE RECV --> RFC
But I am getting issue while doing first scenario
Desgn :
I have created 2 Synchronous interfaces :
1) FILE 2 JDBC REQ
In this a) out put message is FILE Req
          b) Input msage:; FILE RES
2} JDBC2FILE RECV
        a) Output mesage;; JDBC REQ
        b) Input Msge :: JDBC Response
Mappings:
1) File REQ-->JDBC REQ
2) JDBC RES-->FILE RES
Interface mappings:
1: FILE 2 JDBC REQ--> JDBC 2 FLE RECV
CONFIGURATION ::
1: One Seder File CC
2: Two reciever CC's one is for JDBC RECEIVER and other s FILE RECEIVER
3; One Sender Agreement
4: 2 Recver agreements
5: One Interface Determination and
6: One RECCV Determination
My Question;;
1. First let confirm whether my development steps are right or not ?
2: Another thing s I am not sure reg Configuration Steps means
whetehr one interface determination and one Receiver Determinations are required or not as these are synchronous Interfaces
3: main Issue is::::
If my scenario s FILE2RFC2FILE then I will get RFC response automatically but here issue is this is JDBC
My reqquirement is By sending one Field from fILE to JDBC REQ it needs to send entire TAbLE records as a Response to file as XML
without having Sender JDBC how can I send the JDBC Res to FILE and If that is the case then again JDBC adapter is polling which is contradict to the client requuirement which i explained above.
pleas suggest me the Detailed steps mainly Colloboration agreements and logical routings and
also explain in detail if i can go for BPM
Also give cleear blogs but before giving make sure that it contains detailed screen shots because aIready gone thorugh
Scenario File-JDBC-RFC
File<-->JDBC Sync coomunication.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file(Without+BPM)
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
Regards::
Amar Srinivas Eli

Excise Reg at Depot

Hi all,
We have Excise REg no for Plant. But plant does not have Excise reg no.
Material is shipped to Depot with excise invoice. What is the procedure at depot for GR.
Do i need to capture the excise invoice?. From Depot, there is no excise invoice generated for customers.
thanks.

Hi,
Refer following link;
[J95 - Sales at Depot|http://help.sap.com/bp_bblibrary/500/HTML/J95_SaleDepot_EN_IN.htm]

How to set reg.cgi for VideoPhoneLabs

i start with stratus .i try set it to work with my dedicated apache server and sql but have no clue how to do it or where to put this file on my server.
i realy have probleme with reg.cgi
for now i did www/cgi-bin/reg.cgi and in the xml i set my websiteurl = "http://88..../cgi-bin/"
also how to complete reg.cgi for have it to talk with my db ?
here the reg.cgi file.
help please ...
#! /usr/bin/python --
reg.cgi by Michael Thornburgh.
This file is in the public domain.
IMPORTANT: This script is for illustrative purposes only. It does
not have user authentication or other access control measures that
a real production service would have.
This script should be placed in the cgi-bin location according to
your web server installation. The database is an SQLite3 database.
Edit the location of the database in variable "dbFile".
Create it with the following schema:
.schema
CREATE TABLE registrations (
    m_username VARCHAR COLLATE NOCASE,
    m_identity VARCHAR,
    m_updatetime DATETIME,
    PRIMARY KEY (m_username)
CREATE INDEX registrations_updatetime ON registrations (m_updatetime ASC);
# CHANGE THIS
dbFile = '.../registrations.db'
import cgi
import sqlite3
import xml.sax.saxutils
query = cgi.parse()
db = sqlite3.connect(dbFile)
user = query.get('username', [None])[0]
identity = query.get('identity', [None])[0]
friends = query.get('friends', [])
print 'Content-type: text/plain\n\n<?xml version="1.0" encoding="utf-8"?>\n<result>'
if user:
    try:
        c = db.cursor()
        c.execute("insert or replace into registrations values (?, ?, datetime('now'))", (user, identity))
        print '\t<update>true</update>'
    except:
        print '\t<update>false</update>'
for f in friends:
    print "\t<friend>\n\t\t<user>%s</user>" % (xml.sax.saxutils.escape(f), )
    c = db.cursor()
    c.execute("select m_username, m_identity from registrations where m_username = ? and m_updatetime > datetime('now', '-1 hour')", (f, ))
    for result in c.fetchall():
        eachIdent = result[1]
        if not eachIdent:
            eachIdent = ""
        print "\t\t<identity>%s</identity>" % (xml.sax.saxutils.escape(eachIdent), )
        if f != result[0]:
            print "\t\t<registered>%s</registered>" % (xml.sax.saxutils.escape(result[0]), )
    print "\t</friend>"
db.commit()
print "</result>"

Persistent binding is effectively provided by STMS (MPxIO) - is there anything in particular you're wanting to do that STMS doesn't provide?

SAP_COLLECTOR_FOR_PERFMONITOR background job cancelled in SM37

Dear all ,
One of the scheduled background job has been cancelled .
Kindly check the below loga and Background job details .
Job name        SAP_COLLECTOR_FOR_PERFMONITOR
Job class       C
Status          Canceled
(ABAP Program
Name           RSCOLL00
Variant
Language       EN)
Job Log :
30.05.2010 06:20:32 Job started
30.05.2010 06:20:32 Step 001 started (program RSCOLL00, variant , user ID DDIC)
30.05.2010 06:20:37 Clean_Plan:Cleanup of DB13 Plannings
30.05.2010 06:20:37 Clean_Plan:started by RSDBPREV                       on server PRDCIXI
30.05.2010 06:20:38 Clean_Plan:Cleaning up jobs of system IRP
30.05.2010 06:20:39 Clean_Plan:finished
30.05.2010 06:20:43 ABAP/4 processor: DBIF_RTAB_SQL_ERROR
30.05.2010 06:20:43 Job cancelled
Kindly suggest

Dear all ,
Kindly check the ST22 error logs .
Short text SQL error occurred in the database when accessing a table. What happened? The database system detected a deadlock and avoided it by rolling back your transaction. What can you do? If possible (and necessary), repeat the last database transaction in the hope that locking the object will not result in another deadlock. Note which actions and input led to the error. For further help in handling the problem, contact your SAP administrator . You can use the ABAP dump analysis transaction ST22 to view and manage termination messages, in particular for long term reference. Error analysis The database system recognized that your last operation on the database would have led to a deadlock. Therefore, your transaction was rolled back to avoid this. ORACLE always terminates any transaction that would result in deadlock. The other transactions involved in this potential deadlock are not affected by the termination. Last error logged in SAP kernel Component............ "SAP-Gateway" Place................ "SAP-Gateway on host PRDCIXI / sapgw01" Version.............. 2 Error code........... 679 Error text........... "program prodoradb.sapccmsr.99 not registered" Description.......... "TP prodoradb.sapccmsr.99 not registered" How to correct the error Database error text........: "ORA-00060: deadlock detected while waiting for resource" Internal call code.........: "[RTAB/UPD /MONI ]" Please check the entries in the system log (Transaction SM21). If the error occures in a non-modified SAP program, you may be able to find an interim solution in an SAP Note. If you have access to SAP Notes, carry out a search with the following keywords: "DBIF_RTAB_SQL_ERROR" " " "RSHOST3M" or "RSHOST3M" "PUT_LOGBOOK" If you cannot solve the problem yourself and want to send an error notification to SAP, include the following information: 1. The description of the current problem (short dump) To save the description, choose "System->List->Save->Local File (Unconverted)". 2. Corresponding system log Display the system log by calling transaction SM21. Restrict the time interval to 10 minutes before and five minutes after the short dump. Then choose "System->List->Save->Local File (Unconverted)". 3. If the problem occurs in a problem of your own or a modified SAP System call.......... " " Module............... "gwr3cpic.c" Line................. 1835 The error reported by the operating system is: Error number..... " " Error text....... " "
for detail log.
System environment
SAP-Release 700
Application server... "PRDCIXI"
Network address...... "10.54.145.32"
Operating system..... "AIX"
Release.............. "5.3"
Hardware type........ "000184CAD400"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 8
Shortdump setting.... "full"
Database server... "PRODORADB"
Database type..... "ORACLE"
Database name..... "IRP"
Database user ID.. "SAPSR3"
Terminal................. " "
Char.set.... "C"
SAP kernel....... 700
created (date)... "Mar 7 2010 21:00:49"
create on........ "AIX 2 5 005DD9CD4C00"
Database version. "OCI_102 (10.2.0.2.0) "
Patch level. 246
Patch text.. " "
Database............. "ORACLE 10.1.0.., ORACLE 10.2.0.., ORACLE 11.2...*"
SAP database version. 700
Operating system..... "AIX 1 5, AIX 2 5, AIX 3 5, AIX 1 6"
Memory consumption
Roll.... 1217248
EM...... 0
Heap.... 0
Page.... 32768
MM Used. 1050520
MM Free. 146024
and Transaction
Client.............. 000
User................ "DDIC"
Language key........ "E"
Transaction......... " "
Transactions ID..... "4BFF227871E00187E10080000A369120"
In the source code you have the termination point in line 521
of the (Include) program "RSHOST3M".
The program "RSHOST3M" was started as a background job.
Job Name....... "SAP_COLLECTOR_FOR_PERFMONITOR"
Job Initiator.. "DDIC"
Job Number..... 02033500
In the source code you have the termination point in line 521
of the (Include) program "RSHOST3M".
The program "RSHOST3M" was started as a background job.
Job Name....... "SAP_COLLECTOR_FOR_PERFMONITOR"
Job Initiator.. "DDIC"
Job Number..... 02033500
Program............. "RSHOST3M"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
rmation on where terminated
Termination occurred in the ABAP program "RSHOST3M" - in "PUT_LOGBOOK".
The main program was "RSHOST3M ".

I bought an itunes gift card in a different country than my account is reg to, can i use it??

my acc is reg in ireland, i am currently in new zealand and bought a gift card, i cant work out how to use it, help!

You can't.
They are country specific.
You could get a New Zealand address, then get a credit card that is billed to that address, then set up an account in New Zealand, and as long as you are inside the Borders of New Zealand, then you could redeem the card.

SAP_COLLECTOR_FOR_PERFMONITOR dumping MEMORY_NO_MORE_PAGING

Dear friends,
In one of our BW production system, 2 instance of hourly job SAP_COLLECTOR_FOR_PERFMONITOR is dumping MEMORY_NO_MORE_PAGING.
I have already checked this thread :
MEMORY_NO_MORE_PAGING
But I am unable to find out the reason and also i do not find any Moni Key in abap dump. Please suggest.
PART OF ABAP DUMP :
   40          SEGMT     = SEGMT.
   41 *     exceptions
   42 *          others       = 1.
   43
   44 EXPORT TS    TO MEMORY ID 'RSORAT2M'.
   45 EXPORT TD110 TO MEMORY ID 'RSORAT4M'.
>>>>> EXPORT SEGMT TO MEMORY ID 'RSORAT6M'.
   47
   48 * INCLUDE rsorat0b.       T.S. 11/96
   49 * INCLUDE rsorat0m.       T.S. 11/96
   50 * INCLUDE rsorat0f.       T.S. 11/96
   51 *INCLUDE RSORAT2F.
thanks
ashish

Hello friends,
Of-Course MEMORY_NO_MORE_PAGING is a memory dump and it can be avoided if i increage paging sizes. We have smaller value for this parameter and I am not convinced if it is required now to increase it. This was working nicely sometime back.
So, When we say we have abap statement EXPORT which is causing MEMORY_NO_MORE_PAGING. But the same abap statement was working fine sometime back and we did not had this problem. So i assume if there is something like large number of history records as per SAP Note 713211 is troubling us.
Now, i want to findout what is causing so much of memory requirement & page files.
We also get similar dumo when we manually try to perform DB Checks & update histories with transaction DB02OLD. This is the same this what Collector Job also doing and dumping.
Any new suggestion please..
thanks
ashish

How to execute a .reg file in a task sequence using MDT 2013

Hi,
Im trying to add a couple of desktop icons to my custom images during deployment using MDT 2013. I have a .reg file with all commands inside it but I am struggling to get these to work. the .reg file is located on my deployment server and is in a shared
folder which everyone has full read\write access to, I was wondering if someone could help?
The commands inside the .reg file are:
reg add HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\ClassicStartMenu /v {20D04FE0-3AEA-1069-A2D8-08002B30309D} /t REG_DWORD /d 0 /f
reg add HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel /v {20D04FE0-3AEA-1069-A2D8-08002B30309D} /t REG_DWORD /d 0 /f
reg add HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\ClassicStartMenu /v {59031a47-3f72-44a7-89c5-5595fe6b30ee} /t REG_DWORD /d 0 /f
reg add HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel /v {59031a47-3f72-44a7-89c5-5595fe6b30ee} /t REG_DWORD /d 0 /f
Thanks

That's not a *.reg file. that's a set of commands used in a *.cmd file.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Since my last firefox update, I have been unable to type an email - the text box does not appear when I press 'reply' , or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] s

Hello. Since my last firefox update, I have been unable to type an email - the box within which one would usually type does not appear when I press 'reply' to a received email, or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] successfully for well over a year. The provider says it is a browser problem. I can still add an attachment to the email header, which successfully can be sent, but the recipient gets my standard email 'signature' with font messages and the attachment. Can anyone help? My email addresses are [email protected] [this is the one with the issue] and [email protected] in English
== today

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Error while compiling : Couldn't allocate output reg for contraint '{ax}'!

Hey all,
I'm trying to use an encryption library with Flash using Alchemy (PolarSSL)
I don't have any experience with compiling C and stuff (I've programmed in C# and Flash before) and I get an error when trying to compile my test program. I get :
Couldn't allocate output reg for contraint '{ax}'!
Does anyone know why I am getting this error? I managed to compile only the MD5 part of the library in flash and it all worked, that happens only when I try to put more classes from PolarSSL into my library.
Thank you

Hey all,
I'm trying to use an encryption library with Flash using Alchemy (PolarSSL)
I don't have any experience with compiling C and stuff (I've programmed in C# and Flash before) and I get an error when trying to compile my test program. I get :
Couldn't allocate output reg for contraint '{ax}'!
Does anyone know why I am getting this error? I managed to compile only the MD5 part of the library in flash and it all worked, that happens only when I try to put more classes from PolarSSL into my library.
Thank you

Reg XML generation from java objects using SAX 2.0

i'm using java 1.6 and i've imported following class to generate XML from java objects
import com.sun.org.apache.xml.internal.serialize.OutputFormat;
import com.sun.org.apache.xml.internal.serialize.XMLSerializer;
the following class has been imple her to create a Xml file and tag elements ,
OutputFormat of = new OutputFormat("XML", "iso-8859-1", true);
XMLSerializer serializer = new XMLSerializer(fos, of);
ContentHandler hd = serializer.asContentHandler();
hd.startDocument();
everything works fine but i'm getting warrnin reg the serializer and outputformat
warring is:
com.sun.org.apache.xml.internal.serialize.OutputFormat is Sun proprietary API and may be removed in a future release
com.sun.org.apache.xml.internal.serialize.OutputFormat is Sun proprietary API and may be removed in a future release
HOW CAN I AVOID DS WARRING PLZ HELP REG DS
thanks ,
with regards,
Rajesh.S

I've been having the same problem. Here is what i found:
[http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6476630]
Hope that helps (or at least helps you feel better).

CDs I burn from my itunes 10 on my macbook with snow lepard will not play in the regular cd player. How do I burn Cds that will pay in a reg old cd player?

CDs I burn from my itunes 10 on my macbook with snow lepard will not play in the regular cd player. How do I burn Cds that will pay in a reg old cd player?

When the computer was new, I had the same issue I have now. It was new and I could not burn to play on a reg cd player. Today, I can not burn to play on a reg cd player. Inbetween, I could not burn to play on a reg cd player. I keep giving up and then trying months later.
I have recently made the cds that play on the computer. I have also tried in the last month to make a dvd copy, it played. I have gone to people's homes and tried the cd's burned in my computer. They are not recognized. This last round I have only used the cd-r but have tried many others in the past. I am running out of money to keep buying different brands, kinds, etc. I figured it must be my lac of knowledge and am trying to get some new here.
Sincerely,
Paul

Reg:SAP_COLLECTOR_FOR_PERFMONITOR

Similar Messages

Maybe you are looking for