Reg. table name, that contains data of deletion of PP & PM operations(point

Hi all,
Could any body tell me the table, that contains task list operation deletion data in PM terms of tcode IA01.
or in case of PP u can see routing data operation.
It's urgent.....
Help me & have ur poinrts.
Regards,
pradeep phogat

HI smith,
Actually in tcode IA02, when we select an operation & make it delete...then in table PLPO i am getting no deletion field. Actually i am making a change BDC for changing the frequency of the operation. So in that i need to consider the deleted operation........
Reply plesssssss

Similar Messages

  • To know the table names that contains changed and old PO values.

    Dear All,
            Please let me on the table names that contains changed PO value and old PO value details for which I'll be grateful.
    Regards,
    S.Suresh

    Hello,
    Check the table CDHDR and CDPOS.
    Cheers,
    Vasanth
    Edited by: Vasanth M on Feb 18, 2008 12:08 PM

  • How to query / list table name with certain data type?

    Hi all spatials,
    Sorry for the dumb question. I need to make a query that list all table name that contain certain data type, eg. SDO_georaster. How to do this ?
    Many thanks in advance
    damon

    Skip it. I figured it : using USER_TAB_COLUMNS will definitely help.
    Cheers
    damon

  • Query for retreiving table names that have the same data

    Hi,
    Does anybody know how to retreive all the table names that have the same data in their respective tables but i dont know the table names or its fields. Is there any possible query to perform this action???
    Thanks in Advance,
    Balaji.

    What about...
    WITH manager_list AS
    SELECT name,
            LTRIM(MAX(SYS_CONNECT_BY_PATH(id,','))
            KEEP (DENSE_RANK LAST ORDER BY curr),',') AS employees
    FROM   (SELECT m.name,
                    e.id,
                    ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) AS curr,
                    ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) -1 AS prev
             FROM   manager m,
                    join_table jt,
                    employee e
      WHERE m.id           = jt.manager_id
      AND   jt.employee_id = e.id
      AND   m.name = :P_MANAGER)
      GROUP BY name
      CONNECT BY prev = PRIOR curr AND name = PRIOR name
      START WITH curr = 1
    ), all_list AS
    SELECT name,
            LTRIM(MAX(SYS_CONNECT_BY_PATH(id,','))
            KEEP (DENSE_RANK LAST ORDER BY curr),',') AS employees
    FROM   (SELECT m.name,
                    e.id,
                    ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) AS curr,
                    ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) -1 AS prev
             FROM   manager m,
                    join_table jt,
                    employee e
      WHERE m.id           = jt.manager_id
      AND   jt.employee_id = e.id)
      GROUP BY name
      CONNECT BY prev = PRIOR curr AND name = PRIOR name
      START WITH curr = 1
    SELECT a.*
    FROM   manager_list m,
           all_list a
    WHERE  m.employees = a.employeesWould be easier in 11g, but I don't have an installation here so this is based on 10g.
    Cheers
    Ben

  • You do not have permissions to access a database that contains data required for this form to function correctly.

    I have dropdown on infopath form , and it receives data from sql server table ,  it works fine when i am running in preview mode , but when i am publishing form to sharepoint server and loading that form
    i am getting this
    You do not have permissions to access a database that contains data required for this form to function correctly.
    Can you please help?
    Thanks,

    try this one, if not yet
    Convert the data connection to UDC (store it in a Data Connection Library within the same site collection as the form library).  See if this works without any other changes, but if not, then...
    Manually edit your UDC file in Notepad (or your preferred editor) so that the authentication line is not commented out and so that it references the name of the SSO target app you created. 
    For Type, use NTLM.
    Ensure the user has rights to access the database
    Also ensure the connection file has been approved - A sharepoint admin can access a non approved Ucdx file. Go to the connection library and approve the file
    Also check this post having the similar issue:
    http://social.technet.microsoft.com/Forums/en-US/3196bafd-4bc3-40ab-ac2b-d149d1c3e0fa/sharepoint-2010-error-you-do-not-have-permissions-to-access-a-database?forum=sharepointdevelopmentprevious
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • How to Find what are tables and "Table Name" in particular "Data File"

    hi Team,
    I have one database that database 300 gb size , this database having 6 ndf files ,
    here How to Find  what are the tables and  "Table Name"  in particular "Data File"[.ndf]

    Hi,
    In addition to Prashanth’s suggestion, you can also use the following Transact-SQL statements to get more detailed information including  all objects and indexes per Filegroup / Partition and allocated data size of databases.
    The script can work with Microsoft SQL Server 2005 and higher version in all Editions. For more details, please review this article:
    List all Objects and Indexes per Filegroup / Partition.
    -- List all Objects and Indexes
    -- per Filegroup / Partition and Allocation Type
    -- including the allocated data size
    SELECT DS.name AS DataSpaceName
    ,AU.type_desc AS AllocationDesc
    ,AU.total_pages / 128 AS TotalSizeMB
    ,AU.used_pages / 128 AS UsedSizeMB
    ,AU.data_pages / 128 AS DataSizeMB
    ,SCH.name AS SchemaName
    ,OBJ.type_desc AS ObjectType
    ,OBJ.name AS ObjectName
    ,IDX.type_desc AS IndexType
    ,IDX.name AS IndexName
    FROM sys.data_spaces AS DS
    INNER JOIN sys.allocation_units AS AU
    ON DS.data_space_id = AU.data_space_id
    INNER JOIN sys.partitions AS PA
    ON (AU.type IN (1, 3)
    AND AU.container_id = PA.hobt_id)
    OR
    (AU.type = 2
    AND AU.container_id = PA.partition_id)
    INNER JOIN sys.objects AS OBJ
    ON PA.object_id = OBJ.object_id
    INNER JOIN sys.schemas AS SCH
    ON OBJ.schema_id = SCH.schema_id
    LEFT JOIN sys.indexes AS IDX
    ON PA.object_id = IDX.object_id
    AND PA.index_id = IDX.index_id
    WHERE OBJ.type_desc='USER_TABLE'-- add this WHERE clause to display the information of user tables
    ORDER BY DS.name
    ,SCH.name
    ,OBJ.name
    ,IDX.name
    Thanks,
    Lydia Zhang

  • How to find table name which provide data for the DataSource

    Hi friends,
    How to find the Table name which providing data for the Business content DataSources (Master Data). Is there any table or Transation which give datasource and Table name at once.
    Thanks&Regards
    Revathi

    Hi Revathi...........
    1)If the datasource is extracting data from any table.................open the datasource using RSO2..........there u will get the table name......
    2) If the datasource is extracting data from any view.............go to RSA2..........copy the view name..........go to SE11 >> give the view name >> and check..........
    3) If Datasource is Function module based............then u hav to check in RSA2 >> give the datasource name >> execute >> there u will find the Extract structure name......Copy the Extract Structure name >> Go to SE11 >> in the Data Element field give the Extract structure name >> Display >> From the Entry Help/Check tab u can get the Table name............
    If u double click on the Extractor..............u will get the Function Module..............from there also u can check that the FM extracting data from which tables............
    For Other datasources also...........u can get the structure name from here........
    4) If the Datasources r LO datasources............then u can get the table name in LBWE.............LO extractor - goto transaction LBWE.................... Select the maintenance link for your datasource............
    here in the right hand pane.........in the drop down box, you can see the structures associated with this extractor ........ just remove the MC for the structure names to get the base table names. e.g. EKKO for MCEKKO.
    5) There is a pattern for the Extract structure name for LO datasources.............for an example..........
    DataSource 2LIS_11_VAITM ......Extract structure name is  MC11VA0ITM
    2LIS_11_VAHDR  >> MC11VA0HDR
    Hope this helps.........
    Regards,
    Debjani.......

  • Table name for plan data

    Hi All,
    could you please give me table name for plan data. this is tcode where we can see for range of cost centers S_ALR_87013612 (range of cost centres) and cost elements as well. but our client wants to extract from the table which has the same values in the report S_ALR_87013612.
    from which table they need to extract.
    your early response will be highly appreciated.
    Regards,

    Dear,
    Try following tables..
    1. COKP - Primary planning
    2. COKS - Secondary planning.
    Regards,
    Chintan Joshi

  • Table name which contains the email addresses maintained in address area of SCOT

    HI,
    I would like to know the table name which contains the email addresses maintained in address area of SCOT.
    I know how to see through SCOT, but I want to see as a list through SAP table.
    I am not able to see email list through SXNODE AND SXADDRTYPE tables.
    Thanks,
    Nagaraju Ravuri

    Hi Nagaraju,
    You may use ADR6 table and field SMTP to get email address of respective users.
    Regards,
    Deepak Kori

  • When i open an irc link with a channel name that contains "~" at the end, firefox (14.0.1) opens the same channel name but with "%7E" instead of "~" at the end

    when i open an irc link with a channel name that contains "~" at the end firefox (14.0.1) opens the same channel name but with "%7E" instead of "~" at the end
    http://img835.imageshack.us/img835/2856/clipboard05nq.jpg

    I can not open the image, but I can say something in general about the tilde.<br>
    The tilde "~" is an unreserved character and therefore it can be replaced by its percent-encoded form "%7E" inside a URI without changing meaning. See<br>
    http://en.wikipedia.org/wiki/Percent-encoding<br>
    According to section 2.3 of RFC3986 we should prefer the unencoded form so this behavior seems to be a bit out-dated.<br>

  • Retrieve lowest (entity) members that contain data

    Hi
    I'm faced with a dilemma (obviously).
    In Essbase (9.3) Report Script Editor I'm supposed to write an export script that is supposed to select the lowest (entity) members that contain data.
    Does anyone know any way to do this?
    Would really appreciate any tips.

    What I need is the lowest members that HAVE data^^^I am a broken record, and an unlistened one at that. Of course, who would be silly enough to play a broken record? And who on this board is even old enough to know what a record is? But I digress...
    As I wrote before, if you use DATAEXPORT, and then pick the DATAEXPORTOPTION that selects input level data, you will get the level zero AND the upper level data. Level 0 one month, level 1 the next, level 2 the month after that, right back down to level 0. Input data does both for you.
    Per the Tech Ref:
    DataExportLevel ALL | LEVEL0 | INPUT
    * Input—Input blocks only (blocks containing data from a previous data load or spreadsheet Lock & Send). This option excludes dynamically calculated data.Regards,
    Cameron Lackpour

  • Supress Missing Blocks : Suppressing rows that contains data

    Hi,
    In Hyperion Planning 11.1.2.2, on a webform if I do supress missing blocks, it suppresses rows that contains data also (for 3 particular members of the dimension selected in the row).
    This webform is otherwise a huge report & if I do not check on supress missing blocks, the application hangs on trying to open this report (webform).
    Summarizing, on selecting supress missing blocks, it should bring me data for 90 members but it is currently displaying results for 87 members.
    Thanks in Advance.
    Pawan.
    [email protected]__

    Are you definitely sure there are no blocks for those members, maybe there is data but it is just set as #missing and the blocks have not been removed.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Table name of Classification Data in Material Master

    Hi Experts,
    Greetings to all...
    I wish to ask one question.
    I wanted to upload the initial data in material. in initial data I wanted to maintain the classification data for the batch management. Please tell me what is the name of table/field where the material and classification data is stored. I couldnt find anything in the table KLAH, AUSP, CABN, CAWN.
    Thanking you in advance,
    Regards,
    UK.

    Dear UK,
    If you using ALE:
    Follow following sequence:
    CHRMAS Characteristics that contain global and local object dependencies
    KNOMAS (global object dependencies)
    CHRMAS Characteristics that contain global and local object dependencies
    CLSMAS Classes with characteristics and their overwritings, including object dependencies
    The characteristics and characteristic values must be transferred second time
    to create the assignment of the global object dependencies to the characteristics
    and characteristic values.
    BR,
    ian Wong

  • Table name that stores infopackage,DTP and BW table names

    Hi,
    I want to create a program to populate the fields with the BW table name(/BIC,/BI0 etc.),Infopackage name and DTP name(Process Variant).May I know from which table I can get the infopackage name using the BW table name?
    Hope my question is clear enough.
    Regards,
    G.Srinivasan

    Hi,
    InfoPackage:
    RSLDPIO Links datasource to infopackages
    RSLDPIOT InfoPackage Text Description
    RSLDPRULE ABAP source code for InfoPackages
    RSLDPSEL Hardcoded selections in InfoPackages
    RSMONICDP Contains the request-id number by data target
    RSPAKPOS List of InfoPackage Groups / InfoPackages
    RSSUBSTEP2EVID
    https://wiki.sdn.sap.com/wiki/display/BI/ImportantTablesinSAPBI%28NW2004%29
    Thanks
    Reddy

  • A database that contains data required for this form to function correctly cannot be found?

    Hi,
    In my scenario, i m trying to pull out data from sql server using windows authentication and display in infopath form.
    I set some rules in textbox control change that retrieve data from sql database.
    and I have enabled cross domain data access for user form .
    and i have stored the connection file into the connection library and i have approved.
    The form working fine in server (browser), but whenever i m trying to open the form in client browser i m getting the below error.
    please assist me to resolve this error.
    venkateshrajan

    Hi,
    Please make sure following options are enabled in Central Administration > General Application
    Settings > InfoPath Forms Service > Configure InfoPath Forms Services.
    1) Allow user form templates to use authentication information contained in data connection files.
    2) Allow cross-domain data access form user form templates that use connection settings in a data connection file.
    (-This you have done)
    Do you use host name to access the data source? If yes, please
    check of the DisableLoopback check is enabled. Please make sure the loopback check is disabled on all SharePoint servers and reboot server to test if it works.
    http://support.microsoft.com/kb/896861
    Please refer this link with similar problem
    Hope it helps!
    Thanks,
    Avni Bhatt

Maybe you are looking for