Reg the output for sales order

hi friends,
i have raised the sales order, i have gone to change mode and i have got the output.
here, my problem is when i try to enter some more sales data in the same sales order in the change mode , i was unable to get the output for the respective order.
Msg : output has not been selected..
Thanks in advance
rajurahim

Hi there,
What O/p are you talking here?
Usually O/p will be trigered when the doc is saved. In some scenarios, it is triggered when some details are changed. The condition under which it is triggered is maintained in the requirement routine in the O/p determination procedure.
Also if the condition records are maintained, it will automatically trigger. If you want to re-trigger, then you need to go got VA02, select the O/p & click on repeat O/p.
In your case, what I feel is the requirement is not met when you try to retrigger the O/p.
Regards,
Sivanand

Similar Messages

  • T Code for doing mass output for Sales order like VL71 for Delivery

    Hi
    Can anyone let me know what is the t code for the sales orders for which despatch time was set as "3- using own transaction"
    Muthu

    Hi,
    Though there is a program, there is no output for sales order similar to VL71 for delivery. Sales order is the only transaction for which there is no tcode for this purpose.
    You can do the following.
    Go to SE38 give program name SD70AV1A and execute
    Now give ur selection criteria and save this as a variant.
    Now you can schedule a job at regular intervals using this variant.
    This will enable that if you maintain the output record as 3(using own transaction), the output will be created in mass for multiple sales orders.

  • Upload the data for sales order using BAPI

    hi experts,
    how to upload the data for sales order using BAPI.
    what is the FM?
    it would be much helpful if i have the sample code as i am very new to BAPI.
    thanks and Regards
    Shyam

    Hi  Shyam
    Its very useful for u
    BAPISDORDER_GETDETAILEDLIST
    BAPI_ACC_SALES_ORDER_CHECK
    BAPI_ACC_SALES_ORDER_POST
    BAPI_ACC_SALES_QUOTA_CHECK
    BAPI_ACC_SALES_QUOTA_POST
    Reward all the helpful answers..
    With Regards
    Navin Khedikar

  • What is the field for sales order type?

    pls tell me what is the field for sales order type??
    and from which table........urgent

    Hi,
    Field for sales order type is AUART in table TVAK
    the Parent table for Sales order type is TVAK.
    Best regards,
    raam

  • How to mark up the price for sales order entry?

    Hi Gurus,
    How to Mark up the price for sales order entry?
    Example: Item Price: $10, Adding 20% Margin
    Selliing price of the item is $12
    we are giving many typs discounts like festival Discount, customerwise, Order value wise etc..
    After giving above discounts, if discount falls below $10 system should not allow to book the order, Trigger should go to respective person or sales person saying that item price falling below cost, system should not allow to book the sales order.
    How to configure this scenarios in Order management Module, appreciate your inputs, advise.
    Regards
    AK

    Thanks for your response,
    can you please guide me step to achieve this requirement.
    Regards
    AK

  • Collective Outputs for sales orders

    hi,
    Please can anybody help me to find out the outputs collectively for Sales Order.

    Hi I asked a similiar question and this was the answer i received from PJ and it worked for me
    Hi Paul,
    SAP has provided a Standard Program,SD70AV1A for Mass printing of Sales Orders. Give the same to your ABAP team and ask them to assign a T-Code to this program.

  • Output for Sales order Item

    Hi All,
    I have created an output type for item level output in sales order.Please suggest me what is the program  and FORM routine to be assigned to this output type.
    Thanks,
    Anup.

    Hello,
    You have to create the PRINT PROGRAM & SMARTFORM as per your requirement.
    Program can be created in the SE38 transaction code
    Smartform can be created in the transaction code SMARTFORMS
    This will be done be ABAPERS, just you have to give the functional specifications to the ABAPERs to fetch the data.
    Hope it is clear,
    thanks,
    santosh

  • Want the code for sales order confirmation idoc

    New SAP output type ZA23 (with condition logic)for sales order confirmation  is needed to create ORDRSP IDoc when the following 3 cases are true: 1) Item Added, 2) Line Item Changed,3) Item Deleted.
    Changes to existing lines (option 002) can include:
    - qty
    - date
    - price

    Look at the function exits under the enhancement SDEDI001 you have many exits, i think the outbound idoc is primariy created by the function module: IDOC_OUTPUT_ORDRSP.
    Hope this helps.
    Rajeev

  • Re-peating the output in sales order

    Hi,
    When we create a sales order and save it , the output is issued through output type. We are now facing an issue.
    when we do some changes in the sales order (manually or batch job), the output is not re-triggred.
    how to re-trigger the output. It can be done manually be repaeting the output but we want  system to repeat the output automatically . how this is possible ?
    regards

    Hi Sonu,
    For such repeating the output type for the change also, need to contact the functional consultants. They can configure in NACE tcode.
    FYI, they are supposed to maintain the acess sequence, procedures and conditions records and assign them.
    Regards,
    Aditya

  • Repeating the output in sales order

    Hi,
    When we create a sales order and save it , the output is issued through output type. We are now facing an issue.
    when we do some changes in the sales order (manually or batch job), the output is not re-triggred.
    how to re-trigger the output. It can be done manually be repaeting the output but we want  system to repeat the output automatically . how this is possible ?
    regards

    Hi,
    Check in VV12 for the condition record, there is one button called Repeat Output. Use that it used for the repeat output processing only. I think this will solve your problem
    Hope you get some inputs
    regards,
    Sagar
    Edited by: Sagar Wagh on Dec 18, 2009 7:28 AM

  • Default output for Sales Order

    Hi SAP experts,
      I have created 2 different order output and assign to 2 different access sequence
    (1) Sales Order Type/Created By  -> Output Z001
    (2) Sales Order Type -> Output Z002
      These 2 access sequence are included a output determination procedure. I would like to have the following behaviour
    Once output is determined in (1), stop
        However, in my situation, both Z001 and Z002 can be determined if condition satisfied
    (ii) Default an output if condition meet. (automatically highlight the item when issue output)
       Please kindly guide through the process. Thanks.
       Points will be awarded for useful answers.

    Hi !
    I guess the indicator "Exclusive" in the accessess of the access sequence can meet the requirement if I have note misunderstood the issue.
    Press : F1 help on Exclusive Indicator -
    Indicator: Exclusive condition access
    Controls whether the system stops searching for a record after the first successful access for a condition type within an access sequence.
    Thanks & Regards

  • The tutorial for SALES ORDER

    HI i have to work in SALES ORDER GETLIST in WEBDYNPRO can any of SDNers plz mail me the links or material for this .
    Cheers.

    Hi Sunil,
        kindly check the following link for a sample:   <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9cb5d345-0801-0010-6a8e-fc57c23fd600">Here</a> and <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cb243c45-0801-0010-eb9c-88669007f130">Here</a>
    Regards
    Suresh

  • What is the Program for Sales Order Line Item Rescheduling

    Hi,
    There is a background scheduled job which does sales order line items rescheduling but I could get the name of the Program/Function Module by looking at the Jobs log. Can any one please help me?
    When does the rescheduling happen? Does it happen while creating delivery for the order? I need to understand the rescheduling the process to solve a bug in the User Exit / Screen Exit.
    Appreciate your help in Advance.
    Thanks,
    Kannan.

    If you know the job name, than you can find out the associated program name.
    Go to SM37.
    Select your job from the list
    Select "Step" ... here it will show you the program name
    Put cursor on the program name and Go to > Variant to know what was the input to run this job.
    Regards,
    Naimesh Patel

  • The problem for sales order ra settlement

    dear friends
    i encounter a problem in sales order settlement
    1 we use rev based result analyse ,and with profit realization
    2 when the so status is rel ,the valuation base is Q,when the status is TECO and finl ,the valuation base is J
    3 when we partially do the billing and run the ra settlement ,the poc = cumulate act rev/plan rev * actual cost in current period(i think this should be the cumulate actual cost ),and it lead to the error calcuation of the COGS,i do not know where the confirguation is error ,is in valuation base ?
    can you help me
    thank you

    dear friends
    i encounter a problem in sales order settlement
    1 we use rev based result analyse ,and with profit realization
    2 when the so status is rel ,the valuation base is Q,when the status is TECO and finl ,the valuation base is J
    3 when we partially do the billing and run the ra settlement ,the poc = cumulate act rev/plan rev * actual cost in current period(i think this should be the cumulate actual cost ),and it lead to the error calcuation of the COGS,i do not know where the confirguation is error ,is in valuation base ?
    can you help me
    thank you

  • Similar Functionality as VF31 or VL71 for Sales Orders

    Hi Experts,
    VF31 and VL71 is for mass processing of outputs for Delivery & Billing documents. Is there similar functionality for sales orders?
    Regards
    Lawrence

    Hi Lawrence,
    There is no tcode, but you can mass process outputs for sales orders using the program SD70AV1A

Maybe you are looking for

  • Lost sound devices now blue screen of death when updating creative drivers.

    I have an XPS with windows 7, dont k now what the sound card is, I have factory installed software for Creative X something extreme, and Realtex. Now I had been trying to get sound via an optical cable to an AV amp with no success. I had tried disabl

  • Creating Closed Captions in Final Cut Pro

    Does anyone have any reference information on adding Caption Files to Final Cut Pro?

  • My Curve Won't Turn On

    Last night my phone was nearly dead but I placed it on charge. Through the night am guessing one of my dogs knocked the plug out. This morning I woke up the phone was dead. I placed it on charge and I got a solid red light from the led but its not tu

  • Reuse Sales Quotation in SAP Business One Addon

    I m designing an addon for SAP Business One using  VB .net 2005. I have created a menu for that Addon. Now i want to open the existing SALES QUOTATION from a sub menu of my new ADDON Menu. Please tell me if it is possible or not ? If it is possible t

  • Error message: 'ORA-00926:missing VALUES keyword

    Hi Friends, I am trying to update a database table in SAPR3.ORACLE database from CRM via an ABAP program. I did required BDCON setup. But I get the error message : ORA-00926:missing VALUES keyword. Looking forward your help to solve this problem.  An