Reg. User defined text

hello frds,
I have one doubt,let suppose I am modifying some program and I have to write some common comment every time in my program.
like
Start of Code insertion by Yerukala Setty on 14.05.09
End of code insertion by Yerukala Setty on 14.05.09
or
Start of code comment by yerukala setty.....
and so on...
If u save it some where in the editor it can automatically populate in the new editor.
Can anybody tell that...where we have to add these lines and populate automatically..
thnks
Yerukala setty

hi,
go to se38, in the right end corner u get the option button, click on it. You get an option called code templete, here u can write the text and the code needed to be written automatically.
regards
Yogi

Similar Messages

Error when try Specify User-Defined Text Types

Hi all,
I have a problem when I try to Specify User-Defined Text Types. The system gave me the error what is described below. Do you know how to solve a problem?
F1
Choose the key from the allowed namespace
Message no. SV019
Diagnosis
You have attempted to create an entry and have used a key which is not in your namespace.
This can cause problems in later upgrades because the entry could be overwritten by an import, or overwrite an existing entry.
Procedure
Check your entry and try to enter a key value from your namespace.
You can display the namespace definition with RDDKOR54.
If you must use the key entered, document your change so that it can be repeated after an upgrade or release change if necessary. If you put the data in a change request, you can export it before an upgrade or release change, and import it again afterwards.

do you have more details or advice and so on?

DG_CL USER DEFINED TEXT POPULATING THE DG MASTER DURING FILL

Good day,
My question is regarding having the Dangerous Goods User-Define Text (SAP_EHS_1022_042) characteristics SAP_1022_042_PPDG (Profile) & SAP_EHS_1022_042_TEXT) populate on to the DG Master during fill.
1. The characteristics are maintained on the DG_CL
2. The Regulations are assigned the appropriate DG Profile
3. Table mapping is in place (verified via CGAC)
4. User Profiles have been created
I am looking to have the DG Fill populate the above information to the following fields on the DG Master: DG Profile (PPDG1 & PPDG2) and User Defined Text (PDGF1 &PDGF2).
When the DG Fill is executed, the DG Master is created with Class, PKG, SEG Key, Description....etc; however, the User Defined Text information is not brought over.
Our data model is that we inherit the DG_CL data on to the Real Substance.
I appreciate any assistance or information you can provide.
Thanks,
Chris Villamor

Dear Chris
I can not go intodetails but please check EHS DG customizing. You will find an activity in which the mapping is done (EHS product safety structure/data to DG data); by enlarging you should be able to get the data filled. May be you need to implement an additional function module.
Check may be these links:
http://help.sap.com/saphelp_46c/helpdata/es/b0/1b4b6e5733d1118b3f0060b03ca329/content.htm
Enhancement of the Dangerous Goods Master - Dangerous Goods Management (EHS-DGP) - SAP Library
http://help.sap.com/saphelp_46c/helpdata/es/35/6f291e268b2239e10000009b38f984/content.htm?frameset=/es/35/6f291d268b2239e10000009b38f984/frameset.htm&current_toc=/es/f0/71369adc56d11195100060b03c6b76/plain.htm&node_id=60
Dangerous goods
Incorrect assgnt of dang.gds user-defined texts of real sub.
Spec.features for filling dangerous goods user-defined texts
I am sorry to say that there is no consulting OSS note available regarding DG filling.
Hope this helps as a starting point
C.B.

Using user defined text functions to generate strings on button.

I am new to java programming and am facing a problem.. It would be great if you could help me resolving it..
The problem is:
Is it possible to use user defined functions to generate the string on a button(button name)?
If it is possible please educate me on it..
Thanks..

Yes its possible. What you ask is so vague that it can be interpreted in so many ways there are plenty correct answers
public void userDefinedFunction(String aString)
yourButton.setText(aString);
}

How to pop-up a text box for a grid item on a user defined table?

Hello,
I have a user defined table with a grid & one of the columns is for comments. What I'm trying to do is to pop up a text box when double clicking in the column field. This would be the same as the Item Details column in the Sales Order ittems grid.
Thanks,
Ron

Please post your question on SDK forum. Only SDK could meet your need.
Thanks,
Gordon

Adding user-defined number of text fields.

Okay I am having problems, obviously. I am developing a program where the user will enter X and Y values and the program will calculate the relational data. However, I can't even get a start.
First of all, the user defines the number of pairs of points they want to define. For example, they have 20 points, each with its own X and Y, so they click on 20 and then okay in the first window.
The next window will then take their answer and display X and Y text fields for as many points as they defined. However, I can't figure out any way to do this.
Feel free to run the program, the problem lies in the method setTextFields(). Help please!
import javax.swing.*;               //FOR SWING COMPONENT CLASSES
import java.awt.*;                  //FOR CONTAINER CLASS
import java.awt.event.*;            //FOR EVENT HANDLING
public class RegressInput extends JFrame
    private JComboBox listJComboBox;        //COMBO BOX TO HOLD HOW MANY PAIRS OF DATA POINTS THE USER HAS TO ENTER
    private JButton answerButton;           //BUTTON TO CLICK AFTER SELECTING PAIRS OF DATA POINTS
    private JPanel textFieldTopPanel;       //TEXT FIELD TOP PANEL
    private JPanel textFieldBottomPanel;    //TEXT FIELD BOTTOM PANEL
    private JPanel textFieldPanel;           //TEXT FIELD PANEL
    private CardLayout cardSelector;        //DECLARE CARD LAYOUT OBJECT
    private JPanel cardDeck;                //DECLARE CARD PANEL OBJECT
    public RegressInput(String title)
        super(title);               //CALL SUPERCLASS CONSTRUCTOR
        //CREATE A CONTAINER
        Container container = getContentPane();
        //INSTANTIATE CARD LAYOUT OBJECT
        cardSelector = new CardLayout();
        //INSTANTIATE PANEL OBJECT
        cardDeck = new JPanel();
        //SET LAYOUT OF CARD DECK PANEL TO CARD LAYOUT
        cardDeck.setLayout(cardSelector);
        //DEFINE LABEL FOR FIRST CARD
        Label question = new Label("How many PAIRS of data would you like to enter?");
        //BUTTON TO SUBMIT NUMBER OF POINTS TO PLOT
        answerButton = new JButton("OK");
        listJComboBox = new JComboBox( getArray() );//USE getArray() METHOD TO SET ITEM LIST OF THE COMBO BOX
        listJComboBox.setMaximumRowCount(10);       //SETS THE VISIBLE NUMBER OF ITEMS TO THE USER
        Label xValues = new Label("X Values");      //LABEL FOR X values
        Label yValues = new Label("Y Values");      //LABEL FOR Y values
        //BUILD CARD DECK
        JPanel comboBoxCard = new JPanel();     //CREATE FIRST CARD
        comboBoxCard.add(question);             //ADD question LABEL TO FIRST CARD
        comboBoxCard.add(listJComboBox);        //ADD listJComboBox TO FIRST CARD
        comboBoxCard.add(answerButton);         //ADD answerButton TO FIRST CARD
        textFieldTopPanel = new JPanel();       //CREATE TOP PANEL OF SECOND CARD
        textFieldTopPanel.add(xValues);         //ADD xValues Label TO SECOND CARD
        textFieldTopPanel.add(yValues);         //ADD yValues Label TO SECOND CARD
        textFieldBottomPanel = new JPanel();    //CREATE BOTTOM PANEL OF SECOND CARD
        textFieldBottomPanel.setLayout(new FlowLayout(FlowLayout.CENTER,10,10));    //SET LAYOUT FOR BOTTOM PANEL
        textFieldPanel = new JPanel();          //CREATE PANEL FOR SECOND CARD
        textFieldPanel.setLayout(new BorderLayout(10, 10)); //SET LAYOUT FOR SECOND CARD
        textFieldPanel.add(textFieldTopPanel, "North"); //ADD textFieldTopPanel TO NORTH
        textFieldPanel.add(textFieldBottomPanel, "South"); //ADD textFieldBottomPanel TO SOUTH
        cardDeck.add(comboBoxCard, "Step 1");       //ADD FIRST CARD TO DECK
        cardDeck.add(textFieldPanel, "Step 2");     //ADD SECOND CARD TO DECK
        container.add(cardDeck);                    //ADD CARD DECK TO CONTAINER
        //DEFINE BUTTON HANDLER OBJECT
        ButtonHandler buttonHandler = new ButtonHandler();
        //ADD ACTION LISTENER FOR BUTTONS
        answerButton.addActionListener(new ButtonHandler());
    }//END RegressInput() CONSTRUCTOR
    //METHOD TO CREATE AND RETURN AN ARRAY OF VALUES FOR JComboBox
    private String[] getArray()
        //CREATE ARRAY TO HOLD 30 VALUES
        int numbers[] = new int[29];
        //CREATE int IN ORDER TO START THE ARRAY AT 2 INSTEAD OF 1
        int number = 2;
        //ASSIGN VALUES FROM 2 TO 30 TO numbers[] ARRAY
        for(int count=0; count < 29; ++count)
            numbers[count] = number;        //SETS EACH INDEX TO number
            number++;                       //INCREMENTS number
        }//END for LOOP
        //CREATE pairs[] ARRAY TO HOLD 30 STRINGS
        String pairs[] = new String[29];
        //ASSIGN VALUES 1 TO 30 IN STRING ARRAY FOR COMBO BOX
        for(int count = 0; count < 29; ++count)
            pairs[count] = "" + numbers[count];
        }//END for LOOP
        return pairs;//RETURNS pairs[] ARRAY FOR THE LIST ITEMS IN listJComboBox
    }//END getArray() METHOD8
    //RETURNS THE ITEM SELECTED BY THE USER FROM THE JComboBox
    private int getValue()
        //ASSIGNS STRING VALUE OF THE JComboBox TO A WRAPPER
        Integer v = new Integer((String) listJComboBox.getSelectedItem());
        //ASSIGNS WRAPPER VALUE TO int
        int value = v.intValue();
        //RETURN VALUE OF SELECTED ITEM
        return value;
    }//END getValue()
    private void setTextFields()
    {//HERE LIES THE PROBLEM! WHAT GOES IN THIS METHOD????
        for(int count = 0; count < (2 * getValue()); ++count)
    }//END setTextFields()
    //BUTTON EVENT HANDLER CLASS
    private class ButtonHandler implements ActionListener
     //PROCESS EVENT
        public void actionPerformed(ActionEvent e)
            //WHICH BUTTON CAUSED THE EVENT?
            if(e.getSource() == answerButton)
                cardSelector.last(cardDeck);
                cardDeck.setSize(600,600);
            }//END if STATEMENT
        }//END actionPerformed()
    }//END ButtonHandler CLASS
}//END RegressInput CLASSHere is main:
import javax.swing.JFrame;
public class TestSharpStats
     public static void main(String[] args)
        //DEFINE FRAME OBJECT
        RegressInput window = new RegressInput("Hi");     //SETS TITLE BAR
        window.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);      //CLOSES WINDOW
        window.setSize(400, 600);    //SET FRAME SIZE
        window.setResizable(true); //PREVENTS USER FROM RESIZING WINDOW
        window.setVisible(true);     //SETS window TO VISIBLE
    }//END main()
}//END TestSharpStats CLASS

muit-post: http://forum.java.sun.com/thread.jspa?messageID=4442652

How to change the text of a user defined field in dynamic selections?

Logical Database PSJ is used by t code CJI3 - we added a couple of user fields into the dynamic selections of CJI3.
Now - how to change the text of this user filed (USR01 of structure PRSP_R in logical database PSJ)?
Found an OSS note - 86980 - that tells that this is not possible.
But when we read the documentation on the user field (CJI3 - dynamic selections - double click on user field - F1), it shows the following text:
User-defined field in which you can enter general information with a length of up to 20 characters.
Dependencies
The names (key words) for user-defined fields depend on the field key.
Now the question is where to change the field key..
Thanks,
Ven

Madhu - you did not get the question I think.
Anyways - I found an OSS note 1266643 - this code change should take care of the issue - it will then reflect the details maintained in custoizng at transaction code OPS1..
Thanks,

Reusing the 'Row Text Details' system form (Form 65088) in a User Defined F

Hi Experts,
Is there any way by which we can reuse the form 'Row Text Details' -system form (no 65088) in a user defined form.
This window pops up to accept a large text when we change the 'Type' to 'Text' in marketing document line Items -Order/Invoice etc.
I found the code to invoke forms related to a menu but which is not useful in this case.
Thanks in advance
Regards
Ajith G

Hello,
This is not possible, you should create an addon for this functionality.
Regards,
J

Which text editor can use User Defined Languages?

On Windows, Notepad++ is able to use User Defined Languages. On a mac, I know of no text editors that can use them. Not only that, my mac stubbornly refuses to acknoledge the existence of .ecl, .dnh, and other scripting languages. I bundled Notepad++ and used AppleScript to make an executable, but it is not funny when you have to manually open Notepad++, then search for your file, then open it, then do things with it rather then clicking the file for it to open.
I would like to know if there are ANY text editors that can run User Defined Languages on a mac. Please do not tell me to use Winebottler to package Notepad; I already have Notepad++

Or, put your text file on DropBox, using the iPad app and email a link to others, or put it on MobileMe (iDisk app) or sharevvia iWork (online sharing for Pages documents).
Besides the word processing apps like Pages, there are a ton of notes and notebook apps which have various file sharing capabilities. Plain Text is a free plain text editor which links to a DropBox folder, e.g. And the Elements app will sync to DropBox and also let you email. There are many others.
The trick is figuring out what you need--how much formatting, e.g.--and what type of access by your PC is most convenient. I use apps that sync to DropBox or MobileMe, so that those files are always accessible. Much as I love MobileMe for syncing my calendars, contacts and to do lists, I prefer DropBox for document access and I've found iWork unreliable.

Is it good practice to define text elements in User exits & there by using?

Hi Experts,
Simple doubt that, am wrting code in a User Exit. So, here my code works only, if the DOC TYPE = 'XXX'.
So, instead of using hard coding as 'XXX', I wuld like to use a text element, like
if DOC TYPE = text-xxx.
my logic.
endif.
and creating the same text element.
so, let me know that,
Is it safe/recommended to use text-element in exits?
Is it good practice to define text elements in User exits?
thanq

u can also use SET ID's if u dont want to hardcode like that in ur program.
if u use SET ids , no need of transport request in case of change in the DOC types , directly u can change values in that set it , its like a master id.
sytax will be like this
doc_type in g_doc_type(this is set id ).
for creation of set ids see tcode GS01.
regards
Prabhu

Reg: Configuring the User-Defined Message Search

Hi Experts !
I am getting an error while configuring the user defined message search.
Followed all the step mentioned in the sap help documentation.
http://help.sap.com/saphelp_nwpi711/helpdata/en/48/c85598f63335bfe10000000a42189d/frameset.htm
The last step, where we need to enter URL for WSDL Access i am getting the following error:
Error in WSDL access: Exception occurred in communication framework:
Error in HTTP Framework:404Not Found
http://<Host>/<Port>/MessageSearch/MessageSearchImplBean
You should enter the host name and the HTTP port for the Advanced Adapter Engine
i didnt get the meaning of above sentence : Is it different from what we use in the URL to access ESR and ID.
Is there any other steps to make MessageSearch/MessageSearchImplBean available
Regards,
Srinivas
Edited by: Srinivas on Oct 1, 2010 7:48 PM

Hi José Omar,
thanks for the reply...
I tried manual configuration but with no luck..opened a similar forum thread
I have applied the sap note suggested ,thinking that the error is due
to any source code.
The data synchronization is happening properly , but when i use test extractor button it throws the above mentioned error.
In the system details in have given the port number as 50700(which is visible in the link when we open integration builder page) and ESR client as 001.
could you please let me know if the exact values to be filled in transport setting.i just entered the port and client , other things
as default.
Regards,
Srinivas

Predictive text and the user defined dictionary, h...

for ages now I've suspected that I'm losing words out of my dictionary. how are the additional words stored in the phone? and can the location be changed to the memory card if its an issue with the phones memory?
cheers
Rich
Nexu 5

I experienced this with my Nokia 6230. That after a certain amount of user defined words, that the first ones i had put in where lost and i had to type them in all over again! Very frustrating, actually so frustrating that i simply stopped writing in the words that didnt match the wordlist and just pushed # 2 times and entered the word the old fashioned way! I think that the 6230 didnt have more then around 20 user defined words that could be put in!
However on my new Nokia N80 there seems to be alot larger amount of words that are user defined in the wordlist, since i yet havent seen the oldes words be replaced! Perhaps the old phones had a much smaller list of words being able to be stored.
Same thing goes with messages, on my 6230 the inbox got full at around 100 sms. But on the N80 i think that the memory is dynamic and therefor can store more messages, words and whatever!

Error in conditional map using User Defined Function

All,
In my mapping I basically have a user defined function that returns the filename of my inbound file from the adapter-specific message attributes (file adapter). I know this is coded properly because if I simply assign this function to my destination field I can see the filename in the payload XML.
However if I conditionally check that returned value using if,then,else I get an error message stating:
"During the application mapping com/sap/xi/tf/_MaterialData2ZcustProdMastMulti_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformation"
Essentially in my if I'm checking if the value returned by my user defined function is equal to the constant "SOMECONSTANT" then I'm setting my destination field to some other constant value. Otherwise it's equal to a different constant value.
Any thoughts?

Claus,
Thanks for the help. I actually had figured the problem out on my own. Sorry for not updating the thread sooner. What happened was this (as I suspected it wasn't related to my user defined function). For the newbies out there (of which I'm one) the problem was I was comparing strings in the graphical mapping tool using the Boolean "EQUALS" rather than the Text "EQUALSS".
Can you give yourself points for solving

Adding user-defined data

Okay I am having problems, obviously. I am developing a program where the user will enter X and Y values and the program will calculate the relational data. However, I can't even get a start.
First of all, the user defines the number of pairs of points they want to define. For example, they have 20 points, each with its own X and Y, so they click on 30 and then okay in the first window.
The next window will then take their answer and display X and Y text fields for as many points as they defined. However, I can't figure out any way to do this.
Feel free to run the program, the problem lies in the method setTextFields(). Help please!
import javax.swing.*;               //FOR SWING COMPONENT CLASSES
import java.awt.*;                  //FOR CONTAINER CLASS
import java.awt.event.*;            //FOR EVENT HANDLING
public class RegressInput extends JFrame
    private JComboBox listJComboBox;        //COMBO BOX TO HOLD HOW MANY PAIRS OF DATA POINTS THE USER HAS TO ENTER
    private JButton answerButton;           //BUTTON TO CLICK AFTER SELECTING PAIRS OF DATA POINTS
    private JPanel textFieldTopPanel;       //TEXT FIELD TOP PANEL
    private JPanel textFieldBottomPanel;    //TEXT FIELD BOTTOM PANEL
    private JPanel textFieldPanel;           //TEXT FIELD PANEL
    private CardLayout cardSelector;        //DECLARE CARD LAYOUT OBJECT
    private JPanel cardDeck;                //DECLARE CARD PANEL OBJECT
    public RegressInput(String title)
        super(title);               //CALL SUPERCLASS CONSTRUCTOR
        //CREATE A CONTAINER
        Container container = getContentPane();
        //INSTANTIATE CARD LAYOUT OBJECT
        cardSelector = new CardLayout();
        //INSTANTIATE PANEL OBJECT
        cardDeck = new JPanel();
        //SET LAYOUT OF CARD DECK PANEL TO CARD LAYOUT
        cardDeck.setLayout(cardSelector);
        //DEFINE LABEL FOR FIRST CARD
        Label question = new Label("How many PAIRS of data would you like to enter?");
        //BUTTON TO SUBMIT NUMBER OF POINTS TO PLOT
        answerButton = new JButton("OK");
        listJComboBox = new JComboBox( getArray() );//USE getArray() METHOD TO SET ITEM LIST OF THE COMBO BOX
        listJComboBox.setMaximumRowCount(10);       //SETS THE VISIBLE NUMBER OF ITEMS TO THE USER
        Label xValues = new Label("X Values");      //LABEL FOR X values
        Label yValues = new Label("Y Values");      //LABEL FOR Y values
        //BUILD CARD DECK
        JPanel comboBoxCard = new JPanel();     //CREATE FIRST CARD
        comboBoxCard.add(question);             //ADD question LABEL TO FIRST CARD
        comboBoxCard.add(listJComboBox);        //ADD listJComboBox TO FIRST CARD
        comboBoxCard.add(answerButton);         //ADD answerButton TO FIRST CARD
        textFieldTopPanel = new JPanel();       //CREATE TOP PANEL OF SECOND CARD
        textFieldTopPanel.add(xValues);         //ADD xValues Label TO SECOND CARD
        textFieldTopPanel.add(yValues);         //ADD yValues Label TO SECOND CARD
        textFieldBottomPanel = new JPanel();    //CREATE BOTTOM PANEL OF SECOND CARD
        textFieldBottomPanel.setLayout(new FlowLayout(FlowLayout.CENTER,10,10));    //SET LAYOUT FOR BOTTOM PANEL
        textFieldPanel = new JPanel();          //CREATE PANEL FOR SECOND CARD
        textFieldPanel.setLayout(new BorderLayout(10, 10)); //SET LAYOUT FOR SECOND CARD
        textFieldPanel.add(textFieldTopPanel, "North"); //ADD textFieldTopPanel TO NORTH
        textFieldPanel.add(textFieldBottomPanel, "South"); //ADD textFieldBottomPanel TO SOUTH
        cardDeck.add(comboBoxCard, "Step 1");       //ADD FIRST CARD TO DECK
        cardDeck.add(textFieldPanel, "Step 2");     //ADD SECOND CARD TO DECK
        container.add(cardDeck);                    //ADD CARD DECK TO CONTAINER
        //DEFINE BUTTON HANDLER OBJECT
        ButtonHandler buttonHandler = new ButtonHandler();
        //ADD ACTION LISTENER FOR BUTTONS
        answerButton.addActionListener(new ButtonHandler());
    }//END RegressInput() CONSTRUCTOR
    //METHOD TO CREATE AND RETURN AN ARRAY OF VALUES FOR JComboBox
    private String[] getArray()
        //CREATE ARRAY TO HOLD 30 VALUES
        int numbers[] = new int[29];
        //CREATE int IN ORDER TO START THE ARRAY AT 2 INSTEAD OF 1
        int number = 2;
        //ASSIGN VALUES FROM 2 TO 30 TO numbers[] ARRAY
        for(int count=0; count < 29; ++count)
            numbers[count] = number;        //SETS EACH INDEX TO number
            number++;                       //INCREMENTS number
        }//END for LOOP
        //CREATE pairs[] ARRAY TO HOLD 30 STRINGS
        String pairs[] = new String[29];
        //ASSIGN VALUES 1 TO 30 IN STRING ARRAY FOR COMBO BOX
        for(int count = 0; count < 29; ++count)
            pairs[count] = "" + numbers[count];
        }//END for LOOP
        return pairs;//RETURNS pairs[] ARRAY FOR THE LIST ITEMS IN listJComboBox
    }//END getArray() METHOD8
    //RETURNS THE ITEM SELECTED BY THE USER FROM THE JComboBox
    private int getValue()
        //ASSIGNS STRING VALUE OF THE JComboBox TO A WRAPPER
        Integer v = new Integer((String) listJComboBox.getSelectedItem());
        //ASSIGNS WRAPPER VALUE TO int
        int value = v.intValue();
        //RETURN VALUE OF SELECTED ITEM
        return value;
    }//END getValue()
    private void setTextFields()
    {//HERE LIES THE PROBLEM! WHAT GOES IN THIS METHOD????
        for(int count = 0; count < (2 * getValue()); ++count)
    }//END setTextFields()
    //BUTTON EVENT HANDLER CLASS
    private class ButtonHandler implements ActionListener
     //PROCESS EVENT
        public void actionPerformed(ActionEvent e)
            //WHICH BUTTON CAUSED THE EVENT?
            if(e.getSource() == answerButton)
                cardSelector.last(cardDeck);
                cardDeck.setSize(600,600);
            }//END if STATEMENT
        }//END actionPerformed()
    }//END ButtonHandler CLASS
}//END RegressInput CLASS
Here is main:
import javax.swing.JFrame;
public class TestSharpStats
     public static void main(String[] args)
        //DEFINE FRAME OBJECT
        RegressInput window = new RegressInput("Hi");     //SETS TITLE BAR
        window.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);      //CLOSES WINDOW
        window.setSize(400, 600);    //SET FRAME SIZE
        window.setResizable(true); //PREVENTS USER FROM RESIZING WINDOW
        window.setVisible(true);     //SETS window TO VISIBLE
    }//END main()
}//END TestSharpStats CLASS

If your teacher taught you to program like this they should be shot. There is no need to comment every single line (especially in upper case). The comments stand out more that the code does and doesn't add any usefull information. Obviously comments are important, but you need to pick and choose when to use them.
Swing related questions should be posted in the Swing forum.
Also, don't use AWT components in a Swing application. Label is AWT. JLabel is Swing.
I would use a JTable to input the matching pairs of data. Read the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/components/table.html]How to Use Table to get started.

User defined PF-STATUS in ALV

Hi all,
      I am doing an ALV through an user defined pf-status.But when I am using this pf-status I am unable to find the standard application tool bar and remaining also.I have seen some threads regarding this. These threads are giving me the suggestions to copy the standard pf status of ALV into user defined pf status. How to copy this standard pf status to my program.
Sathish Reddy.

First of all you must copy STANDART status from any ALV example in SLIS Development Class into your report.
You can change this status Properties. (Functions, Buttons)
And you must add this form to Active Your Status in ALV.
*&      Form set_pf_status
*       text
* --> p1        text
* <-- p2        text
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'STANDARD' excluding rt_extab.
endform.
and you must add specified line in your callf of ALV Function.
call function 'REUSE_ALV_LIST_DISPLAY'
       exporting
            i_callback_program = g_repid
            it_fieldcat        = gt_fieldcat[]
            it_events          = t_events[]
            i_callback_user_command = 'USER_COMMAND'
            i_callback_pf_status_set = 'SET_PF_STATUS' <<<<<< ADD THIS
       tables
            t_outtab           = mglistoutput.
ibrahim

Reg. User defined text

Similar Messages

Maybe you are looking for