Regading function module to change User Status IN CJ02
Hi All,
I need to chage System status from Budget Assigned(BDAS) to Release. Can any body help me is there any FM to change this status.Tell me ASAP
Thanks,
Sagar.
Hi,
BAPI_BUS2001_SET_STATUS: For Project Defn, WBS
BAPI_BUS2002_SET_STATUS: For Networks
Regards
Similar Messages
-
Function module to set user status during QA11 transaction
Hi ,
Anyone knows the function module to set the user status during QA11/QA12 transaction?
I received the user status 'e.g CFA1' from an idoc data and would like to set the user set based on this idoc value during QA11/QA12 transaction.
Any function module for this action? BDC seems impossible..
Thanks.
Regards,
Clarice.oh i realised this function module can be used
STATUS_CHANGE_EXTERN
with a commit statement.. -
HR - Function module to change trip status
Hi,
I'm trying to change trip approval status to '5' and settlement status to '3' using standard BAPI available BAPI_TRIP_CHANGE_STATUS and getting success message that trip has been changed.
But when i go to trip approval status shown as '2' and settlement status as '3'. Is there any reason for this? My intention is to change approval status to '5' keeping settlement status to '3'. Is there any other function module or BAPI available to do this?
- Siva Sankar.answered
-
Bapi / Function module to change the status of transaction crmd_order
Hello team,
I am developing the utility in CHARM for which i need to change the
Status of transaction CRMD_ORDER from "New to "In process" through
report/BAPI / FM etc... I tried to use report
CRM_socm_service_report.But it never puts status " In process" rather i
updates only " "work in progress ".
Also tried FM "CRM_STATUS_CHANGE_EXTERN" , but doen't work.
After the process is put "In process" , i want to create change request
and assign resource". Is there any report / FM /Bapi or anything in the
system to do this.
I tried to write BDC but dropdown list is not recorded in the recording.
Please advice.
Thanks and regards,
SwapnilNot sure I understand your requirement but maybe FM CRM_ORDER_MAINTAIN will be of help to you.
-
Function Module to set project status in CJ02.
Dear Team,
Is there any Function Module or BAPI to set project status in CJ02.
Please Help.
Thanks in advance,
SaiThanks a lot.
This will serve half of my pupose.
I am looking for setting status of WBS element of aproject definition in CJ02.
Do we have any BAPI or FM for the same.
Actually My purpose is to pool the error log as recording a BDC while closing the status of a WBS element.
Thanks in advance. -
Bapi or Function Module for Change request Management status update
Hi,
Do we have any Bapi or function module to change the status of Change request Management.
Ex: If the status is in To Be Processed i have to change that status to Authorized using any Bapi or FM.
I have tried with the BAPI crm_icss_change_request but its not updating the status.
Do you have any idea on this???
Regards
Pavanhello,
the function module is 'SOCM_STATUS_VALUES'
you can find an example of usage of it in the program CRM_SOCM_SERVICE_REPORT
CALL FUNCTION 'SOCM_STATUS_VALUES'
EXPORTING
im_process_type = report_list-process_type
IM_LANGU = SY-LANGU
TABLES
status_values = lt_vsocm_stat_propt.
I hope it helps
best regards -
Function Module to change the user status of a business transaction
Hi,
I want to change the user status of a business transaction. Plz let me know if there is a function module to change the user status.I found some FMs.
- CRM_STATUS_MAINTAIN_OW
- BBP_PROCDOC_STATUS_CHANGE_DIRE
- CRM_ORDER_CHANGE_STATUS
But these FM says that it has to be used for changing system status.
Thanx,
Sivagami.Rhi Siva,
here is some sample code :
data :
ip_guid type crmt_object_guid,
ls_status type crmt_status_com,
lt_status type crmt_status_comt,
ls_input_field type crmt_input_field,
ls_input_field_names type crmt_input_field_names,
lt_input_fields type crmt_input_field_tab,
lt_obj_guids type crmt_object_guid_tab,
ip_guid = <your guid>.
ls_status-ref_guid = IP_GUID.
ls_status-ref_kind = 'A'.
ls_status-status = lv_newstat.
ls_status-user_stat_proc = 'ZCRMCOM1'.
ls_status-activate = 'X'.
INSERT ls_status INTO TABLE lt_status.
ls_input_field-ref_guid = IP_GUID.
ls_input_field-ref_kind = 'A'.
ls_input_field-objectname = 'STATUS'.
ls_input_field_names-fieldname = 'ACTIVATE'.
INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
INSERT ls_input_field INTO TABLE lt_input_fields.
ls_input_field_names-fieldname = 'STATUS'.
INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
INSERT ls_input_field INTO TABLE lt_input_fields.
insert IP_GUID into table lt_obj_guids.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
EXPORTING
it_status = lt_status
CHANGING
ct_input_fields = lt_input_fields.
CALL FUNCTION 'CRM_ORDER_SAVE'
EXPORTING
it_objects_to_save = lt_obj_guids
EXCEPTIONS
OTHERS = 2.
COMMIT WORK.
please award points if helps
cheers -
Function module to change the reason code for status in a Opportunuity/lead
Hi,
What is the function module to change the opportunity reason. I was able to change the status using the crm_order_maintain but How can I change the reason for that opportunity.
Thanks
naveenYou can use CRM_ORDER_MAINTAIN and populate the parameter IT_SERVICE_OS
or use BAPI_OPPORTUNITY_CHANGEMULTI and populate the parameter SERVICE_OS.
BR,
Florin -
Change User status of Task of Follow up function
Hi All,
Does any one of you know how to change the User status of Task through customizing or programming.
Basically I want to change User status from 'TINI' to 'TSNT' once the email is triggered. I could send the email but I am unable to change the status.
Thanks in advance,
JagadishHey Thomas,
This should solve your problem..
CALL FUNCTION 'CRM_STATUS_CHANGE_EXTERN'
EXPORTING
client = sy-mandt
objnr = wa_new_user_status-guid
user_status = wa_new_user_status-status
no_check = 'X'
SET_INACT = ' '
SET_CHGKZ =
XNOAUTO =
EXCEPTIONS
object_not_found = 1
status_inconsistent = 2
status_not_allowed = 3
OTHERS = 4.
In this FM NO_CHECK parmeter must be set to True, else u wil not be able to set the Status.....
Sample is given above...
Reward points for usefull answer...
Regards,
Anand... -
Is there any function module to Change the System Status
Dear ABAPers,
I am working in the Customer Service Module.I want to change the System status.
Is there any function module to change the System Status.
Thanks & Regards,
Ashok.Hi Ashok
Service Order status update function module ?
How to set the system status
Check above threads,
Regards,
Syf -
IBASE Status update Function Module/ Table Field for status
Dear Experts
We need function module to change status of IBase. Please tell me standard function module if any. Or if no standard fuction moudle exists, please tell me tables which contains user and system status.
Thanks and regardsHi,
Try using FM CRM_IBASE_CHANGE and please remember to call FM CRM_IBASE_SAVE to save the changes made. Thanks.
Regards, AC -
Function module for Process order status
Hi techies,
I want to know the function module for process order status , idoc type is liopro01 and message type is liopro, my requirement is that based on the different status received in IDoc SAP should update the process order status, separate user status will be defined as "MO START" and "MO end" using status profile.also it has change the process order status to "TECO" also it should check the user status for "MO Abort".
Thanks in AdvanceHi ross,
Try this function module.
STATUS_CHECK_MULTI
May be helpful.
Lincon -
LSMW for changing user status on work order(IW32)
Hi All,
I have created a LSMW for changing user status on work order using transaction IW32. It does not change the status when i run the LSMW. In the recording for the LSMW, i select the radio button on the user status i want to select.
When i run the LSMW in the foreground, it does everything except select the correct status.
Is there a way to fix this or is it a problem with LSMW. I'm using ECC6
Kind Regards
EmanuelHi ,
I am not sure whether it would work with LSMW but if your on ECC 6.00 ,Enhacement Pack 3 then you have BADIs which allow you to make collective status changes in IW38 .The below are those BADIs :-
BADI_EAM_RIAUFK20_FCODE_CUS1 :Implement Customer Function Code in Order List
BADI_EAM_RIAUFK20_FCODE_SAP1 :Implement SAP Function Code in Order List
Else if your on lower version then write up a batch programme which checks the PM Order types with specific status and sets user status using FM STATUS_CHANGE_EXTERN[This is used to set or delete User Status] in SE37 ..
regrds
pushpa -
Function module/Webservice for Sytem status overview widget
Hi,
We want to create a "System status overview" - widget, which can show very briefly an overview of which systems are up an which are down (+ some additional backgroundinfo).
(Instead of communicating system statusses via e-mail)
Therefore we are looking for a function module/webservice which provides status info of all systems linked to Solution Manager. Does anybody knows about a standard functionality which provides this information, or does an application lik that already exists?
Thanks in advance for your replies.
Cheers,
SanderHi Mohammed,
Thanks for the reply.
That 's exactly the information we need, but we want to be able to create a simple display to the end user:
- without logging into the system
- displaying only a red or a green light/system
- information about all systems in all solutions
to put into the portal or even better, to put into a widget (I was thinking about using Adobe Air for this one).
To do so, I think there will be the need of a simple web service which returns a list of all systems toghether with their availability status...?
KR,
Sander -
Log on into the function module with different user name.
hi,
i log on into the system with my user id suppose 'mukka' and i have to check the authorization of another user say 'you' using the function module "authority_check_tcode". but here i am getting the problem that when i assigned sy-uname to 'you' and execute the function module it is entering into the function module with 'mukka' user name only.
sample code:-
sy-uname = p_uname.
CALL FUNCTION 'AUTHORITY_CHECK_TCODE' "#EC"
EXPORTING
tcode = v_tcode
EXCEPTIONS
ok = 1
not_ok = 2.
when i am changing the sy-uname with p_uname the sy-uname is changed but when i entered into the function module authority_check_tcode in the debugging mode at the below the sy-uname variable is showing as 'mukka' only. but i need to check the authorizations of user 'you' pls give me solution to my problem.Hi,
Why would you want to check the authorisation of another user and not the one currently logged in? The idea of authorisations is to check the current user is able to perform a certain activity. The majority of fields on SYST are constantly updated to have the correct values (partly so you can't fiddel authorisation checks like this
Maybe if you explain to us what you are trying to do we can offer some other help.
Gareth.
Maybe you are looking for
-
Opening mp4 sony pmw-ex1 files on final cut
Hi: It´s the first time that I work with this codec,I´ve installed the cd camera software and also the pages from sony.but I´m not able to open this files with quicktime or import to my browser in final cut. Thanks a lot. Juan
-
SAP CRM Navigate from custom search page to email component
Hello Experts, I implemented my own search page and added a link on every row of the returned query that should direct me to the email component eg. CRMCMP_CCS_EMLV. I did something similar with Business partners and Task and it works. For BPs and ta
-
Can anyone get my skype name from anywhere in the ...
i have had a chap on my skype from florida america, i asked how he managed to get my name, he said he has just joined skype and picked my name out, could you please tell me how he managed to get my name
-
Hi All, i am working in oracle HRMS, there is one requirement for the generation of employee number. requirement is to generate the employee number base of custom logic. employee number should contain prefix of department/organization e.g (HR001). is
-
Slide Show doubles images on import
All photos I drop into a slide show are duplicated and deleting one automatically deletes the other. please advice