Regarding accesing integration builder tool for java proxy generation

Hi Abapers,
How can I access integration builder tool to generate java proxy via SAP XI server in my ECC 5.0?
Please give me the clear idea of that.
regards
Subash

Hi Marinel,
The support for XSD import is limited on 10.1.2. If you can, you should consider moving to the 10.1.3 preview as the support for document style web services has improved. The other option will be to inline the schema in your WSDL.
Eric.

Similar Messages

Java Proxy Generation not working - Support for Parallel Processing

Hi Everyone,
As per SAP Note 1230721 - Java Proxy Generation - Support for Parallel Processing, when we generate a java proxy from an interface we are supposed to get 2 archives (one for serial processing and another suffixed with "PARALLEL" for parallel processing of jaav proxies in JPR).
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1230721
We are on the correct patch level as per the Note, however when we generate java proxy from the IR for an outbound interface, it genrates only 1 zip archive (whose name we ourselves provide in the craete new archive section). This does not enable the parallel processsing of the messages in JPR.
Could you please help me in this issue, and guide as to how archives can be generated for parallel processing.
Thanks & Regards,
Rosie Sasidharan.

Hi,
Thanks a lot for your reply, Prateek.
I have already checked SAP Note 1142580 - "Java Proxy is not processing messages in parallel" where they ask to modify the ejb-jar.xml. However, on performing the change in ejb-jar.xml and while building the EAR, I get the following error:
Error! The state of the source cache is INCONSISTENT for at least one of the request DCs. The build might produce incorrect results.
Then, on going through the SAP Note 1142580 again, I realised that the SAP Note 1230721 also should be looked onto which will be needed for generating the Java proxy from Message Interfaces in IR for parallel processing.
Kindly help me if any of you have worked on such a scenario.
Thanks in advance,
Regards,
Rosie Sasidharan.

Problem in accessing integration builder tool of XI

Hi
i am having problem in accessing integration builder tool of XI system , when i enter the user credentials it is getting hanged
can any body please help me with this
thanks and regards
Pendyala

Hi,
check whether your xi server is working fine or is it down. If you are not able to open the integration builder, what is the exact error message you are getting.
How are you trying to open your IB.
Are you able to login to SAPGUI for the XI client.
If so try to provide the tcode sxmb_ifr and check whether you are able to open the IB.
Reward points
Regards,
Nithiyanandam

Alerts for Java Proxy Runtime

Hi Gurus!!
I have a problem with a Asynchronous Java Proxy Server.
When a message is sent from Integration Engine to the Java Proxy, in the SXMB_MONI the status is ok, but if there is a problem on the Java Proxy, I can only see on the Messaging Tool 'http://myserver:myport/MessagingSystem'.
Is there any alert to inform of problems of excution of Java Proxies?
Thanks and regards,
Manuel Míguez.

If you can see the error in the Adapter engine monitoring, you can create rule in RWB and get an alert mail. If the error is occuring beyond XI AE, you can not trigger an alert.
VJ

What are the pre-requisite for JAVA Proxy communication?

What are the pre-requisite for JAVA Proxy communication?

Hi,
You can install the Java proxy runtime on the SAP J2EE Engine Release 6.40 SP5 or higher.
The messaging system that the Java proxy runtime uses to send messages to the Integration Server must also be installed on the J2EE server.
To send messages from a J2EE application, the application must be programmed against beans that encapsulate all details about the Java runtime. The following classes are generated:
· Proxy classes that send or receive messages using the Java proxy runtime.
· Bean classes as an outer shell that conform to the J2EE standard. The beans call the proxy classes for communication.
The classes must be deployed on the J2EE server together with their J2EE application
see this link for the example scenario http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d

Business system for java proxy

i use xi system as java AS for java proxy. in receiver communication channel i use URL ADDRESS or HTTP destination?????

please help me its showing following error
<Trace level="2" type="T">Switch back to normalized party (HTTP response)</Trace>
<Trace level="1" type="T">Sender scheme external =</Trace>
<Trace level="1" type="T">Sender agency external =</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="2" type="T">Undo header mapping (HTTP response)</Trace>
<Trace level="1" type="T">Sender: Header before undo of mapping</Trace>
<Trace level="1" type="T">Party =</Trace>
<Trace level="1" type="T">Agency =</Trace>
<Trace level="1" type="T">Scheme =</Trace>
<Trace level="1" type="T">Service = BS_Debashish</Trace>
<Trace level="1" type="T">Receiver: Header before undo of mapping</Trace>
<Trace level="1" type="T">Party =</Trace>
<Trace level="1" type="T">Agency =</Trace>
<Trace level="1" type="T">Scheme =</Trace>
<Trace level="1" type="T">Service = XIT4Java</Trace>
<Trace level="2" type="T">Sender: Header after undo of mapping</Trace>
<Trace level="2" type="T">Party =</Trace>
<Trace level="2" type="T">Agency =</Trace>
<Trace level="2" type="T">Scheme =</Trace>
<Trace level="2" type="T">Service = BS_Debashish</Trace>
<Trace level="2" type="T">Receiver: Header before undo of mapping</Trace>
<Trace level="2" type="T">Party =</Trace>
<Trace level="2" type="T">Agency =</Trace>
<Trace level="2" type="T">Scheme =</Trace>
<Trace level="2" type="T">Service = XIT4Java</Trace>
</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 007</Trace>
<Trace level="3" type="T">Message version 007</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 014</Trace>
<Trace level="3" type="T">Message version 008</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>

Change Business System for Java Proxy Client

I have created Web AS Java business system for Java proxy.
Is it possbile to send message from client Java Proxy as another business system (Third party)?
For example to specify this system
MessageSpecifier messageSpecifier = proxy.$messageSpecifier();
messageSpecifier.setSenderService("MY_BUSINESS_SYSTEM");
proxy.$messageSpecifier(messageSpecifier);

Yes, it is.
That's the way to do it.
Stefan

Any open source of simple statistical analysis tools for java?

Hi ya,
Anyone knows any open source of statistical analysis tools for java?
A simple tool which is able to retrieve the coverage, the number of threads, and a list of methods within the code will be fine :)
Many thx

If what you mean is a profiler, you can get it from Eclipse's plugin, and it's open source.
http://sourceforge.net/projects/eclipsecolorer

Synchronous interfaces missing in Java proxy generation

Hi,
In PI 7.1 ESR, in "Java proxy generation" wizard, it only lists the Asynchronous interfaces from the software component version. None of the synchronous interfaces are listed. how can I solve this? I need to generate a java proxy for a syncronous interface.
thanks and regards,
Raghu

Make sure that the inteface pattern is "stateless (XI 3.0 compatible)".

Error in java proxy generation due to xs:choice tag

Hi all,
I'm trying to generate a java proxy in the SAP XI design.
The message interface I'm using is based on an external definition which i imported from an xsd file.
The problem is that XI doesn't allow me to generate the java proxy because in the xsd schema the tag <xs:choice> is present and XI cannot handle it (just in this case, because the external definition works fine).
Does anybody know how to solve the problem or manage to generate the javaproxy anyhow?
Thanks in advance,
Daniele

> Replace <xs:choice> tag with <b><xsd:choice> tag
> </b>
> that should solve the prob.
I tried to change the tag (replacing also other <xs:...> tags in order to obtain a valid xsd) but the problem didnt change.
i'm almost convinced that tag is not supported in java proxy generation (but it is for external definitions...)

Hire a java expert for java proxy server.

hello,
i need a expert java programmer to hire for a simple java proxy project please contact me if you are intrested please leave me a message for more info.

http://localhost:7021/sbresource?PROXY/MySample/MyJMSProxyService is the WSDL URL of the proxy.
Transport is is picked by the client from wsdl.
As far as the documentation of client generation is there, there is no change.
But meanwhile I have started working on sending the message directly to queue. JMSProxy is getting called. May be I will first run the proxy this way and then try troubleshooting the java client.
Regards
Ashwani

Jars For Java Proxy

Hi all
I am creating a Java Proxy application.
While importing the proxy zip created to my NWDS project I am getting the error due to missing jar files.
Can anyone tell me which all jars have to be added and which all jar files are required.
Regards
Abhishek Mahajan

Hi,
You need several libraries to compile your module.
The easiest way of getting these libraries is by downloading the latest patch for XI
ADAPTER FRAMEWORK CORE 3.0 from SAP Service Marketplace.
Open the file using WinZip and extract aii_af_lib.sda, aii_af_svc.sda and
aii_af_cpa_svc.sda.
Open the file aii_af_lib.sda using WinZip and extract the following library files:
aii_af_cci.jar
aii_af_mp.jar
aii_af_ms_api.jar
aii_af_ms_spi.jar
aii_af_trace.jar
Extract the following library file from aii_af_svc.sda:
aii_af_svc.jar
Extract the following library file from aii_af_cpa_svc.sda:
aii_af_cpa.jar
(You can also find the SDA files on your Adapter Framework installation.)
Plz award if useful....
Regards,
Sri.

Integrating crystal reports9 for java with weblogic8.1

hi,
i working with crystal reports 9 for java,i have a application done in weblogic
which need to generate reports using crystal reports on the user's requirement,so
reports data will be dynamic.kindly help me to proceed further,iam new to weblogic.

hi
i have worked on integrating crystal reports with weblogic
first create the crystal RPT file under the portlet folder create a folder as reports then import the rpt file into ur reports folder u need some .jar files for integrating reports with weblogic or sent ur mail id i
will sent it to u those jar files import those jar files into ur web inf folde of weblogic.
regards
sudhakar

Java proxy generation exc. for web service correspond. to a BPEL process

Hello,
I wrote a BPEL process (having two client methods) that is exposed as an RPC web service. One of the web services invoked by this BPEL process uses a complex data type that is defined in a separate schema XSD file (imported in the corresponding WSDLs). This complex data type is also returned by one of the methods exposed by the BPEL process. From the BPEL point of view everything is fine now: the process was successfully built, deployed and initiated from the BPEL console.
When I tried to generate the web service Java proxy classes from the BPEL process corresponding WSDL, I obtained an error signaling that complex type defined in the imported XSD file cannot be found. The exception is:
[java] oracle.wsdl.internal.WSDLException: Schema type not found: QName(htt
p://oracle/bpeltest/array/ArrayTrial.xsd, ArrayOforacle_bpeltest_array_Customer)
[java] at oracle.wsdl.DefinitionsImpl.findSchemaType(DefinitionsImpl.ja
va:511)
[java] at oracle.wsdl.toolkit.XSDJavaTypeMapper.getArrayComponentType(X
SDJavaTypeMapper.java:169)
[java] at oracle.wsdl.toolkit.XSDJavaTypeMapper.getJavaType(XSDJavaType
Mapper.java:141)
[java] at oracle.wsdl.toolkit.XSDJavaTypeMapper.generateBeans(XSDJavaTy
peMapper.java:251)
[java] at oracle.wsdl.toolkit.XSDJavaTypeMapper.getJavaType(XSDJavaType
Mapper.java:156)
[java] at oracle.wsdl.toolkit.XSDJavaTypeMapper.getJavaType(XSDJavaType
Mapper.java:106)
[java] at oracle.wsdl.toolkit.MethodGenerator.declareMethod(MethodGener
ator.java:152)
[java] at oracle.wsdl.toolkit.MethodGenerator.generateMethod(MethodGene
rator.java:35)
[java] at oracle.wsdl.toolkit.ProxyGenerator.generateJavaProxy(ProxyGen
erator.java:333)
[java] at oracle.wsdl.toolkit.ProxyGenerator.generateJavaProxy(ProxyGen
erator.java:96)
[java] at oracle.wsdl.toolkit.ProxyGenerator.generateJavaProxy(ProxyGen
erator.java:68)
[java] at oracle.j2ee.ws.tools.WsAssmProxyGenerator.generateJavaProxy(W
sAssmProxyGenerator.java:165)
[java] at oracle.j2ee.ws.tools.WsAssmProxyGenerator.processProxy(WsAssm
ProxyGenerator.java:134)
[java] at oracle.j2ee.ws.tools.WsAssmProxyGenerator.clientGenerate(WsAs
smProxyGenerator.java:112)
[java] at oracle.j2ee.ws.tools.WsAssembler.assemble(WsAssembler.java:96
[java] at oracle.j2ee.ws.tools.WsAssembler.main(WsAssembler.java:66)
[java] Exception in thread "main"
When I tried to generate the stub from JDeveloper, the complex type was replaced with a certain dummy "UnknownType".
Do you have any hint?
Thanks in advance!
Regards,
Marinel

You should post this question to the JDev Web Service forum. I know that they had some limitation in 9.0.4 with some complex types. It is my understanding that those problems have been addressed in 10.1.3. They would be the right people to confirm this. -Edwin

Database access tool for Java Development

Hi,
A couple of days back, our SAP's database (MSSQL) was corrupted and downed the Java Stack.
During the Java development, normally after a newly created table was deployed via Java Dictionary, Java developer will access the database via the MSSQL Enterprise Manager to view/delete/update data. Unlike the ABAP development, all database access was done via SE16 in SAPGUI. It was believed that the Java Development kind of direct access to the database via the MSSQL Enterprise Manager was causing some MSSQL tables to be corrupted, and thus downed the Java Stack.
1. Is there any tool like SE16 to access database during the Java Development?
2. If no, what kind of recommendation/tool to access database for Java Development?
Any help would be much appreciated. Thanks.
julius

Julius,
There are no industry recommended open source DB tools.
Normally it depends upon the developer preferences that how he/she wants to see the tool usability.
I can suggest you to go through the below link:
http://sourceforge.net/search/?type_of_search=soft&words=SQL+Tools
You can find many open source SQL tools, which you have to test and select one among them.
I can suggest you to use:
1) TOra
2) Easy SQL
3) SQuirrel
"Choose a Tool which is easy to use and efficient, Dont worry about Look n Feel"
Best of Luck

Regarding accesing integration builder tool for java proxy generation

Similar Messages

Maybe you are looking for