Jars For Java Proxy

Hi all
I am creating a Java Proxy application.
While importing the proxy zip created to my NWDS project I am getting the error due to missing jar files.
Can anyone tell me which all jars have to be added and which all jar files are required.
Regards
Abhishek Mahajan

Hi,
You need several libraries to compile your module.
The easiest way of getting these libraries is by downloading the latest patch for XI
ADAPTER FRAMEWORK CORE 3.0 from SAP Service Marketplace.
Open the file using WinZip and extract aii_af_lib.sda, aii_af_svc.sda and
aii_af_cpa_svc.sda.
Open the file aii_af_lib.sda using WinZip and extract the following library files:
aii_af_cci.jar
aii_af_mp.jar
aii_af_ms_api.jar
aii_af_ms_spi.jar
aii_af_trace.jar
Extract the following library file from aii_af_svc.sda:
aii_af_svc.jar
Extract the following library file from aii_af_cpa_svc.sda:
aii_af_cpa.jar
(You can also find the SDA files on your Adapter Framework installation.)
Plz award if useful....
Regards,
Sri.

Similar Messages

Business system for java proxy

i use xi system as java AS for java proxy. in receiver communication channel i use URL ADDRESS or HTTP destination?????

please help me its showing following error
<Trace level="2" type="T">Switch back to normalized party (HTTP response)</Trace>
<Trace level="1" type="T">Sender scheme external =</Trace>
<Trace level="1" type="T">Sender agency external =</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="2" type="T">Undo header mapping (HTTP response)</Trace>
<Trace level="1" type="T">Sender: Header before undo of mapping</Trace>
<Trace level="1" type="T">Party =</Trace>
<Trace level="1" type="T">Agency =</Trace>
<Trace level="1" type="T">Scheme =</Trace>
<Trace level="1" type="T">Service = BS_Debashish</Trace>
<Trace level="1" type="T">Receiver: Header before undo of mapping</Trace>
<Trace level="1" type="T">Party =</Trace>
<Trace level="1" type="T">Agency =</Trace>
<Trace level="1" type="T">Scheme =</Trace>
<Trace level="1" type="T">Service = XIT4Java</Trace>
<Trace level="2" type="T">Sender: Header after undo of mapping</Trace>
<Trace level="2" type="T">Party =</Trace>
<Trace level="2" type="T">Agency =</Trace>
<Trace level="2" type="T">Scheme =</Trace>
<Trace level="2" type="T">Service = BS_Debashish</Trace>
<Trace level="2" type="T">Receiver: Header before undo of mapping</Trace>
<Trace level="2" type="T">Party =</Trace>
<Trace level="2" type="T">Agency =</Trace>
<Trace level="2" type="T">Scheme =</Trace>
<Trace level="2" type="T">Service = XIT4Java</Trace>
</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 007</Trace>
<Trace level="3" type="T">Message version 007</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 014</Trace>
<Trace level="3" type="T">Message version 008</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>

Change Business System for Java Proxy Client

I have created Web AS Java business system for Java proxy.
Is it possbile to send message from client Java Proxy as another business system (Third party)?
For example to specify this system
MessageSpecifier messageSpecifier = proxy.$messageSpecifier();
messageSpecifier.setSenderService("MY_BUSINESS_SYSTEM");
proxy.$messageSpecifier(messageSpecifier);

Yes, it is.
That's the way to do it.
Stefan

What are the pre-requisite for JAVA Proxy communication?

What are the pre-requisite for JAVA Proxy communication?

Hi,
You can install the Java proxy runtime on the SAP J2EE Engine Release 6.40 SP5 or higher.
The messaging system that the Java proxy runtime uses to send messages to the Integration Server must also be installed on the J2EE server.
To send messages from a J2EE application, the application must be programmed against beans that encapsulate all details about the Java runtime. The following classes are generated:
· Proxy classes that send or receive messages using the Java proxy runtime.
· Bean classes as an outer shell that conform to the J2EE standard. The beans call the proxy classes for communication.
The classes must be deployed on the J2EE server together with their J2EE application
see this link for the example scenario http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d

Including External JARs for Java Application in OC4J

Hi Experts,
Here is my requirement.
I have developed my Java application using Tomcat Server & Eclipse. In my application I have used some External JARs & imported the classes in my JSP.
Now that I'm using OC4J Server instead of Tomcat I'v no clue as to where I have copy these External JARs for my application to work.
I have installed OBIEE-Client which includes OC4J server. The path where I have placed my application is as below
*"C:\OracleBI\oc4j_bi\j2ee\home\default-web-app"*
If I run my application the server does not import the classes in the JSP which we include using Import statement using JSP tags (*ex* - <%@ page import = "org.apache.commons.fileupload.*"%>).
This is the location which I found, where I need to put my Java-J2EE application. This OC4J_BI comes with OBIEE.
Kindly help me out on where to place these External JARs exact location in OC4J.
Also let me know if I have to alter any configuration/xml file (if so pls specify the file name & its location).
Thanks in advance,
Venky

You can either include the external libraries in the application, by placing them into WEB-INF/lib, or you can import them into the server as "shared libraries", normally you'd use the "enterprise manager" application to do this. Having loaded a shared library you then add it to the classpath when you're deploying the application.

Regarding accesing integration builder tool for java proxy generation

Hi Abapers,
How can I access integration builder tool to generate java proxy via SAP XI server in my ECC 5.0?
Please give me the clear idea of that.
regards
Subash

Hi Marinel,
The support for XSD import is limited on 10.1.2. If you can, you should consider moving to the 10.1.3 preview as the support for document style web services has improved. The other option will be to inline the schema in your WSDL.
Eric.

Hire a java expert for java proxy server.

hello,
i need a expert java programmer to hire for a simple java proxy project please contact me if you are intrested please leave me a message for more info.

http://localhost:7021/sbresource?PROXY/MySample/MyJMSProxyService is the WSDL URL of the proxy.
Transport is is picked by the client from wsdl.
As far as the documentation of client generation is there, there is no change.
But meanwhile I have started working on sending the message directly to queue. JMSProxy is getting called. May be I will first run the proxy this way and then try troubleshooting the java client.
Regards
Ashwani

Alerts for Java Proxy Runtime

Hi Gurus!!
I have a problem with a Asynchronous Java Proxy Server.
When a message is sent from Integration Engine to the Java Proxy, in the SXMB_MONI the status is ok, but if there is a problem on the Java Proxy, I can only see on the Messaging Tool 'http://myserver:myport/MessagingSystem'.
Is there any alert to inform of problems of excution of Java Proxies?
Thanks and regards,
Manuel Míguez.

If you can see the error in the Adapter engine monitoring, you can create rule in RWB and get an alert mail. If the error is occuring beyond XI AE, you can not trigger an alert.
VJ

Error of type mismatch for java proxy code

Hi All
I am writing code for server java proxies .I am trying to get the input parameters ,my code is as follows:
package testScenario;
public class MDMtoXIMI_PortTypeImpl extends com.sap.aii.proxy.xiruntime.core.AbstractProxy implements MDMtoXIMI_PortType {
    public void mDMtoXIMI(testScenario.JavaproxyINDT_Type javaproxyINMT) throws com.sap.aii.proxy.xiruntime.core.SystemFaultException, com.sap.aii.proxy.xiruntime.core.ApplicationFaultException{
          JavaproxyINDT_Type obj=new JavaproxyINDT_Type();
          return obj.getName();
       // throw new RuntimeException();
I am getting typemismatch for this piece of code:JavaproxyINDT_Type obj=new JavaproxyINDT_Type();
Can anybody help?

I think the Typemismatch is in the line with "return"
The method declaration is "void", so you cannot use return here.
You should modify the interface to "synchronous"
Regards
Stefan

Tools.jar for Java SE Embedded

Hi all,
I believe Java SE "for Embedded" supports JVMTI,
but tools.jar is not found in any builds such as for ARM and x86.
Without that, the instrument or attach API defined in JVMTI
is not able to work on Java SE for Embedded.
Any suggestion would be appreciated.
Thanks in advance.

Well, I would guess that questions about embedded java would be ok here, questions about J2ME programming would be better suited for the "CLDC and MIDP" forum and Java SE questions would be better someplace here. But don't expect too much, there is not a lot of activity in the forum ...

Message Inbound with Java Proxy

Hi all,
I try looking for java proxy example code to write a whole inbound message into file. But I can't to find it. I try with these blogs but still confuse.
/people/prasad.ulagappan2/blog/2005/06/27/asynchronous-inbound-java-proxy
/people/rashmi.ramalingam2/blog/2005/06/25/an-illustration-of-java-server-proxy
Could you please to help and give me a example code?
Thanks and Regards
Park

Hi,
Refer this link
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d06315a6-e66e-2910-039c-ba8bbbd23702
I hope this would help you

What is java proxy, why its is used and where can i get more info abt this?

Hi all!
My current scenario is File->XI->j2ee appl.
<b>Can XI sends file to my J2EE application using java server proxy.</b> If so how to develop that?
what are the requisites that my SAP system should have?
I have jdk1.5,Tomact5.0,eclipse3.1.2, NWDS2.0.9
Where can i get full step by step procedure to develop that. Please help me
Thanks

Hi
Go through these link:
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/97/7d5e3c754e476ee10000000a11405a/frameset.htm">Java Proxy</a>
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/5b/12b7e6a466456aa71ef852af033b34/frameset.htm">Configuring the Channel for Java Proxy Receivers</a>
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/c5/7d5e3c754e476ee10000000a11405a/frameset.htm">Java Proxy Objects</a>
Hope this will help.
Rgards
DhanyaR Nair

Regarding Java proxy

Hi Abapers,
In my ECC 5.0 systems, cross application components are ther in the initial home page. Is this enough for Java proxy generation?..or separate SAP XI server should be installed to generate java proxy?..because i don't know how to get in to integration builder tool for java proxy generation in my ECC 5.0 version.
Please provide your valuable replies to me as early as possible.

Use tcode sxmb_ifr , you cannot acces Intergration builder from R/3 ie your ECC 6.0 try accesing vai your XI server .
SP mean support pack .

Got error when trying to generate Java proxy jar file for webservice

Hi,
I am having a warning message when trying to generate java proxy jar file on weblogic8.1
webservice test web app, the message is as follows:
"Warning Failed to generate client proxy from WSDL definition for this service.
Prescription Please verify the <types> section of the WSDL."
in the mean time, on weblogic starting terminal, I saw the following exceptions,
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\AlphaLength4Deserializer.java:36: cannot resolve symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkLengthFacet(__typed_obj,4L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\OSIFieldAnonTypeDeserializer.java:36: cannot resolve symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkMaxLengthFacet(__typed_obj,69L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\AlphaLength2Deserializer.java:36: cannot resolve symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkLengthFacet(__typed_obj,2L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\FreeFormAnonTypeDeserializer.java:36: cannot resolve symbol
symbol : class FacetUtils"
Can anybody help me about this issue? I attached WSDL file, also United Airlines
got an enterprise weblogic license deal with BEA, any help will be highly appreciated.
Thanks!!!
Naichen
[ModifyPNRWSContract.wsdl]

Hi Naichen,
I was able to successfully run both the autotype and clientgen Ant task, on the
WSDL you provided. The code behind those Ant tasks are pretty much what the WebLogic
Web Services test page run. Are you using WLS 8.1 SP2? If not, you might want
to try with that version.
Regards,
Mike Wooten
"Naichen Liu" <[email protected]> wrote:
>
>
>
Hi,
I am having a warning message when trying to generate java proxy jar
file on weblogic8.1
webservice test web app, the message is as follows:
"Warning Failed to generate client proxy from WSDL definition for this
service.
Prescription Please verify the <types> section of the WSDL."
in the mean time, on weblogic starting terminal, I saw the following
exceptions,
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\AlphaLength4Deserializer.java:36: cannot resolve symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkLengthFacet(__typed_obj,4L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\OSIFieldAnonTypeDeserializer.java:36: cannot resolve
symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkMaxLengthFacet(__typed_obj,69L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\AlphaLength2Deserializer.java:36: cannot resolve symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkLengthFacet(__typed_obj,2L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\FreeFormAnonTypeDeserializer.java:36: cannot resolve
symbol
symbol : class FacetUtils"
Can anybody help me about this issue? I attached WSDL file, also United
Airlines
got an enterprise weblogic license deal with BEA, any help will be highly
appreciated.
Thanks!!!
Naichen

Including helper classes in java proxy jar file

I must not be using the right header search criteria because I'm sure this question
has been asked before. In a Web Service File (.jws) I've imported a couple of
helper classes that function as data transfer objects. I did this to maintain
consistency with other portions of the application. The Java Proxy jar file generated
by Workshop does not include these files. Is there a way of including these dependencies
or do I need to distribute another jar file with my helper classes?

Hi Naichen,
I was able to successfully run both the autotype and clientgen Ant task, on the
WSDL you provided. The code behind those Ant tasks are pretty much what the WebLogic
Web Services test page run. Are you using WLS 8.1 SP2? If not, you might want
to try with that version.
Regards,
Mike Wooten
"Naichen Liu" <[email protected]> wrote:
>
>
>
Hi,
I am having a warning message when trying to generate java proxy jar
file on weblogic8.1
webservice test web app, the message is as follows:
"Warning Failed to generate client proxy from WSDL definition for this
service.
Prescription Please verify the <types> section of the WSDL."
in the mean time, on weblogic starting terminal, I saw the following
exceptions,
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\AlphaLength4Deserializer.java:36: cannot resolve symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkLengthFacet(__typed_obj,4L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\OSIFieldAnonTypeDeserializer.java:36: cannot resolve
symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkMaxLengthFacet(__typed_obj,69L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\AlphaLength2Deserializer.java:36: cannot resolve symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkLengthFacet(__typed_obj,2L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\FreeFormAnonTypeDeserializer.java:36: cannot resolve
symbol
symbol : class FacetUtils"
Can anybody help me about this issue? I attached WSDL file, also United
Airlines
got an enterprise weblogic license deal with BEA, any help will be highly
appreciated.
Thanks!!!
Naichen

Jars For Java Proxy

Similar Messages

Maybe you are looking for